[PATCH 01/08] mach-shmobile: Emma Mobile EV2 SoC base support V3

Magnus Damm magnus.damm at gmail.com
Wed May 16 02:44:58 EDT 2012


From: Magnus Damm <damm at opensource.se>

This is V3 of the Emma Mobile EV2 SoC support.
Included here is support for serial and timer
devices which is just about enough to boot a kernel.

Signed-off-by: Magnus Damm <damm at opensource.se>
---

 Changes since V2:
 - none, just bumped up version to match the V3 series

 Changes since V1:
 - use IOMEM(), ioremap() and iowrite32() for clock code
 - use built-in ioremap in shared sh clock code
 - break out function prototypes to a separate header
 - move gic code into setup-emev2.c
 - get rid of static io table

 Thanks to Arnd for his kind help!

 arch/arm/mach-shmobile/Kconfig              |    5 
 arch/arm/mach-shmobile/Makefile             |    1 
 arch/arm/mach-shmobile/clock-emev2.c        |  226 +++++++++++++++++++++++++++
 arch/arm/mach-shmobile/include/mach/emev2.h |    9 +
 arch/arm/mach-shmobile/setup-emev2.c        |  180 +++++++++++++++++++++
 5 files changed, 421 insertions(+)

--- 0003/arch/arm/mach-shmobile/Kconfig
+++ work/arch/arm/mach-shmobile/Kconfig	2012-05-12 02:45:10.000000000 +0900
@@ -41,6 +41,11 @@ config ARCH_R8A7779
 	select ARM_GIC
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 
+config ARCH_EMEV2
+	bool "Emma Mobile EV2"
+	select CPU_V7
+	select ARM_GIC
+
 comment "SH-Mobile Board Type"
 
 config MACH_G3EVM
--- 0001/arch/arm/mach-shmobile/Makefile
+++ work/arch/arm/mach-shmobile/Makefile	2012-05-12 02:45:20.000000000 +0900
@@ -12,6 +12,7 @@ obj-$(CONFIG_ARCH_SH7372)	+= setup-sh737
 obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o
 obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7779)	+= setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o
+obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o clock-emev2.o
 
 # SMP objects
 smp-y				:= platsmp.o headsmp.o
--- /dev/null
+++ work/arch/arm/mach-shmobile/clock-emev2.c	2012-05-12 02:44:44.000000000 +0900
@@ -0,0 +1,226 @@
+/*
+ * Emma Mobile EV2 clock framework support
+ *
+ * Copyright (C) 2012  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/sh_clk.h>
+#include <linux/clkdev.h>
+#include <mach/common.h>
+
+#define EMEV2_SMU_BASE 0xe0110000
+
+/* EMEV2 SMU registers */
+#define USIAU0_RSTCTRL 0x094
+#define USIBU1_RSTCTRL 0x0ac
+#define USIBU2_RSTCTRL 0x0b0
+#define USIBU3_RSTCTRL 0x0b4
+#define STI_RSTCTRL 0x124
+#define USIAU0GCLKCTRL 0x4a0
+#define USIBU1GCLKCTRL 0x4b8
+#define USIBU2GCLKCTRL 0x4bc
+#define USIBU3GCLKCTRL 0x04c0
+#define STIGCLKCTRL 0x528
+#define USIAU0SCLKDIV 0x61c
+#define USIB2SCLKDIV 0x65c
+#define USIB3SCLKDIV 0x660
+#define STI_CLKSEL 0x688
+
+/* not pretty, but hey */
+static void __iomem *smu_base;
+
+static void emev2_smu_write(unsigned long value, int offs)
+{
+	BUG_ON(!smu_base || (offs >= PAGE_SIZE));
+	iowrite32(value, smu_base + offs);
+}
+
+static struct clk_mapping smu_mapping = {
+	.phys	= EMEV2_SMU_BASE,
+	.len	= PAGE_SIZE,
+};
+
+/* Fixed 32 KHz root clock from C32K pin */
+static struct clk c32k_clk = {
+	.rate           = 32768,
+	.mapping	= &smu_mapping,
+};
+
+/* PLL3 multiplies C32K with 7000 */
+static unsigned long pll3_recalc(struct clk *clk)
+{
+	return clk->parent->rate * 7000;
+}
+
+static struct sh_clk_ops pll3_clk_ops = {
+	.recalc		= pll3_recalc,
+};
+
+static struct clk pll3_clk = {
+	.ops		= &pll3_clk_ops,
+	.parent		= &c32k_clk,
+};
+
+static struct clk *main_clks[] = {
+	&c32k_clk,
+	&pll3_clk,
+};
+
+enum { SCLKDIV_USIAU0, SCLKDIV_USIBU2, SCLKDIV_USIBU1, SCLKDIV_USIBU3,
+	SCLKDIV_NR };
+
+#define SCLKDIV(_reg, _shift)			\
+{								\
+	.parent		= &pll3_clk,				\
+	.enable_reg	= IOMEM(EMEV2_SMU_BASE + (_reg)),	\
+	.enable_bit	= _shift,				\
+}
+
+static struct clk sclkdiv_clks[SCLKDIV_NR] = {
+	[SCLKDIV_USIAU0] = SCLKDIV(USIAU0SCLKDIV, 0),
+	[SCLKDIV_USIBU2] = SCLKDIV(USIB2SCLKDIV, 16),
+	[SCLKDIV_USIBU1] = SCLKDIV(USIB2SCLKDIV, 0),
+	[SCLKDIV_USIBU3] = SCLKDIV(USIB3SCLKDIV, 0),
+};
+
+enum { GCLK_USIAU0_SCLK, GCLK_USIBU1_SCLK, GCLK_USIBU2_SCLK, GCLK_USIBU3_SCLK,
+	GCLK_STI_SCLK,
+	GCLK_NR };
+
+#define GCLK_SCLK(_parent, _reg) \
+{								\
+	.parent		= _parent,				\
+	.enable_reg	= IOMEM(EMEV2_SMU_BASE + (_reg)),	\
+	.enable_bit	= 1, /* SCLK_GCC */			\
+}
+
+static struct clk gclk_clks[GCLK_NR] = {
+	[GCLK_USIAU0_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIAU0],
+				       USIAU0GCLKCTRL),
+	[GCLK_USIBU1_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU1],
+				       USIBU1GCLKCTRL),
+	[GCLK_USIBU2_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU2],
+				       USIBU2GCLKCTRL),
+	[GCLK_USIBU3_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU3],
+				       USIBU3GCLKCTRL),
+	[GCLK_STI_SCLK] = GCLK_SCLK(&c32k_clk, STIGCLKCTRL),
+};
+
+static int emev2_gclk_enable(struct clk *clk)
+{
+	iowrite32(ioread32(clk->mapped_reg) | (1 << clk->enable_bit),
+		  clk->mapped_reg);
+	return 0;
+}
+
+static void emev2_gclk_disable(struct clk *clk)
+{
+	iowrite32(ioread32(clk->mapped_reg) & ~(1 << clk->enable_bit),
+		  clk->mapped_reg);
+}
+
+static struct sh_clk_ops emev2_gclk_clk_ops = {
+	.enable		= emev2_gclk_enable,
+	.disable	= emev2_gclk_disable,
+	.recalc		= followparent_recalc,
+};
+
+static int __init emev2_gclk_register(struct clk *clks, int nr)
+{
+	struct clk *clkp;
+	int ret = 0;
+	int k;
+
+	for (k = 0; !ret && (k < nr); k++) {
+		clkp = clks + k;
+		clkp->ops = &emev2_gclk_clk_ops;
+		ret |= clk_register(clkp);
+	}
+
+	return ret;
+}
+
+static unsigned long emev2_sclkdiv_recalc(struct clk *clk)
+{
+	unsigned int sclk_div;
+
+	sclk_div = (ioread32(clk->mapped_reg) >> clk->enable_bit) & 0xff;
+
+	return clk->parent->rate / (sclk_div + 1);
+}
+
+static struct sh_clk_ops emev2_sclkdiv_clk_ops = {
+	.recalc		= emev2_sclkdiv_recalc,
+};
+
+static int __init emev2_sclkdiv_register(struct clk *clks, int nr)
+{
+	struct clk *clkp;
+	int ret = 0;
+	int k;
+
+	for (k = 0; !ret && (k < nr); k++) {
+		clkp = clks + k;
+		clkp->ops = &emev2_sclkdiv_clk_ops;
+		ret |= clk_register(clkp);
+	}
+
+	return ret;
+}
+
+static struct clk_lookup lookups[] = {
+	CLKDEV_DEV_ID("serial8250-em.0", &gclk_clks[GCLK_USIAU0_SCLK]),
+	CLKDEV_DEV_ID("serial8250-em.1", &gclk_clks[GCLK_USIBU1_SCLK]),
+	CLKDEV_DEV_ID("serial8250-em.2", &gclk_clks[GCLK_USIBU2_SCLK]),
+	CLKDEV_DEV_ID("serial8250-em.3", &gclk_clks[GCLK_USIBU3_SCLK]),
+	CLKDEV_DEV_ID("em_sti.0", &gclk_clks[GCLK_STI_SCLK]),
+};
+
+void __init emev2_clock_init(void)
+{
+	int k, ret = 0;
+
+	smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE);
+	BUG_ON(!smu_base);
+
+	/* setup STI timer to run on 37.768 kHz and deassert reset */
+	emev2_smu_write(0, STI_CLKSEL);
+	emev2_smu_write(1, STI_RSTCTRL);
+
+	/* deassert reset for UART0->UART3 */
+	emev2_smu_write(2, USIAU0_RSTCTRL);
+	emev2_smu_write(2, USIBU1_RSTCTRL);
+	emev2_smu_write(2, USIBU2_RSTCTRL);
+	emev2_smu_write(2, USIBU3_RSTCTRL);
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	if (!ret)
+		ret = emev2_sclkdiv_register(sclkdiv_clks, SCLKDIV_NR);
+
+	if (!ret)
+		ret = emev2_gclk_register(gclk_clks, GCLK_NR);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		shmobile_clk_init();
+	else
+		panic("failed to setup emev2 clocks\n");
+}
--- /dev/null
+++ work/arch/arm/mach-shmobile/include/mach/emev2.h	2012-05-12 02:44:44.000000000 +0900
@@ -0,0 +1,9 @@
+#ifndef __ASM_EMEV2_H__
+#define __ASM_EMEV2_H__
+
+extern void emev2_init_irq(void);
+extern void emev2_add_early_devices(void);
+extern void emev2_add_standard_devices(void);
+extern void emev2_clock_init(void);
+
+#endif /* __ASM_EMEV2_H__ */
--- /dev/null
+++ work/arch/arm/mach-shmobile/setup-emev2.c	2012-05-12 02:44:44.000000000 +0900
@@ -0,0 +1,180 @@
+/*
+ * Emma Mobile EV2 processor support
+ *
+ * Copyright (C) 2012  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/emev2.h>
+#include <mach/irqs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/hardware/gic.h>
+
+/* UART */
+static struct resource uart0_resources[] = {
+	[0]	= {
+		.start	= 0xe1020000,
+		.end	= 0xe1020037,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1]	= {
+		.start	= 40,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device uart0_device = {
+	.name		= "serial8250-em",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(uart0_resources),
+	.resource	= uart0_resources,
+};
+
+static struct resource uart1_resources[] = {
+	[0]	= {
+		.start	= 0xe1030000,
+		.end	= 0xe1030037,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1]	= {
+		.start	= 41,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device uart1_device = {
+	.name		= "serial8250-em",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(uart1_resources),
+	.resource	= uart1_resources,
+};
+
+static struct resource uart2_resources[] = {
+	[0]	= {
+		.start	= 0xe1040000,
+		.end	= 0xe1040037,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1]	= {
+		.start	= 42,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device uart2_device = {
+	.name		= "serial8250-em",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(uart2_resources),
+	.resource	= uart2_resources,
+};
+
+static struct resource uart3_resources[] = {
+	[0]	= {
+		.start	= 0xe1050000,
+		.end	= 0xe1050037,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1]	= {
+		.start	= 43,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device uart3_device = {
+	.name		= "serial8250-em",
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(uart3_resources),
+	.resource	= uart3_resources,
+};
+
+/* STI */
+static struct resource sti_resources[] = {
+	[0] = {
+		.name	= "STI",
+		.start	= 0xe0180000,
+		.end	= 0xe0180053,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 157,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sti_device = {
+	.name		= "em_sti",
+	.id		= 0,
+	.resource	= sti_resources,
+	.num_resources	= ARRAY_SIZE(sti_resources),
+};
+
+static struct platform_device *emev2_early_devices[] __initdata = {
+	&uart0_device,
+	&uart1_device,
+	&uart2_device,
+	&uart3_device,
+};
+
+static struct platform_device *emev2_late_devices[] __initdata = {
+	&sti_device,
+};
+
+void __init emev2_add_standard_devices(void)
+{
+	emev2_clock_init();
+
+	platform_add_devices(emev2_early_devices,
+			     ARRAY_SIZE(emev2_early_devices));
+
+	platform_add_devices(emev2_late_devices,
+			     ARRAY_SIZE(emev2_late_devices));
+}
+
+void __init emev2_add_early_devices(void)
+{
+	shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
+
+	early_platform_add_devices(emev2_early_devices,
+				   ARRAY_SIZE(emev2_early_devices));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+}
+
+void __init emev2_init_irq(void)
+{
+	void __iomem *gic_dist_base;
+	void __iomem *gic_cpu_base;
+
+	/* Static mappings, never released */
+	gic_dist_base = ioremap(0xe0028000, PAGE_SIZE);
+	gic_cpu_base = ioremap(0xe0020000, PAGE_SIZE);
+	BUG_ON(!gic_dist_base || !gic_cpu_base);
+
+	/* Use GIC to handle interrupts */
+	gic_init(0, 29, gic_dist_base, gic_cpu_base);
+}



More information about the linux-arm-kernel mailing list