[PATCH 08/22] regulator: Change ab8500 match names to reflect Device Tree

[Linus Walleij]

On Wed, May 30, 2012 at 12:47 PM, Lee Jones <lee.jones at linaro.org> wrote:

> The 'name' field in 'struct of_regulator_match' expects to match with
> its corresponding regulator device node in the Device Tree. This patch
> renames each of the regulators in the ab8500 regulator driver so this
> is true.

OK...

>  static struct of_regulator_match ab8500_regulator_matches[] = {
> -       { .name = "LDO-AUX1",    .driver_data = (void *) AB8500_LDO_AUX1, },
> -       { .name = "LDO-AUX2",    .driver_data = (void *) AB8500_LDO_AUX2, },
> -       { .name = "LDO-AUX3",    .driver_data = (void *) AB8500_LDO_AUX3, },
> -       { .name = "LDO-INTCORE", .driver_data = (void *) AB8500_LDO_INTCORE, },
> -       { .name = "LDO-TVOUT",   .driver_data = (void *) AB8500_LDO_TVOUT, },
> -       { .name = "LDO-USB",     .driver_data = (void *) AB8500_LDO_USB, },
> -       { .name = "LDO-AUDIO",   .driver_data = (void *) AB8500_LDO_AUDIO, },
> -       { .name = "LDO-ANAMIC1", .driver_data = (void *) AB8500_LDO_ANAMIC1, },
> -       { .name = "LDO-ANAMIC2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },
> -       { .name = "LDO-DMIC",    .driver_data = (void *) AB8500_LDO_DMIC, },
> -       { .name = "LDO-ANA",     .driver_data = (void *) AB8500_LDO_ANA, },
> +       { .name = "ab8500_ldo_aux1",    .driver_data = (void *) AB8500_LDO_AUX1, },
> +       { .name = "ab8500_ldo_aux2",    .driver_data = (void *) AB8500_LDO_AUX2, },
> +       { .name = "ab8500_ldo_aux3",    .driver_data = (void *) AB8500_LDO_AUX3, },
> +       { .name = "ab8500_ldo_intcore", .driver_data = (void *) AB8500_LDO_INTCORE, },
> +       { .name = "ab8500_ldo_tvout",   .driver_data = (void *) AB8500_LDO_TVOUT, },
> +       { .name = "ab8500_ldo_usb",     .driver_data = (void *) AB8500_LDO_USB, },
> +       { .name = "ab8500_ldo_audio",   .driver_data = (void *) AB8500_LDO_AUDIO, },
> +       { .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8500_LDO_ANAMIC1, },
> +       { .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },
> +       { .name = "ab8500_ldo_dmic",    .driver_data = (void *) AB8500_LDO_DMIC, },
> +       { .name = "ab8500_ldo_ana",     .driver_data = (void *) AB8500_LDO_ANA, },
>  };

So why is the device tree going to use these lowercase names etc?
I guess there is a rationale...

Anyway: the name is used in more parts of the file, so please change
it everywhere if you change it.

Yours,
Linus Walleij