[PATCH RESEND] ARM: pxa: hx4700: Enable ASIC3 GPIO as a wakeup source

[Paul Parsons]

This patch enables the ASIC3 GPIO (12) as a wakeup source:
1. Set the WAKEUP_ON_EDGE_RISE MFP config bits for GPIO12 in
hx4700_pin_config[].
2. Call gpio_set_wake() for GPIO12.

With GPIO12 thus enabled, the mfd/asic3 driver can enable its own GPIOs
as wakeup sources by implementing a irq_set_wake() handler.

Signed-off-by: Paul Parsons <lost.distance at yahoo.com>
Cc: Philipp Zabel <philipp.zabel at gmail.com>
---
 arch/arm/mach-pxa/hx4700.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index de01277..00a00a9 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -129,7 +129,7 @@ static unsigned long hx4700_pin_config[] __initdata = {
 	GPIO88_GPIO,
 
 	/* HX4700 specific input GPIOs */
-	GPIO12_GPIO,	/* ASIC3_IRQ */
+	GPIO12_GPIO | WAKEUP_ON_EDGE_RISE,	/* ASIC3_IRQ */
 	GPIO13_GPIO,	/* W3220_IRQ */
 	GPIO14_GPIO,	/* nWLAN_IRQ */
 
@@ -863,6 +863,7 @@ static void __init hx4700_init(void)
 	int ret;
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
+	gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1);
 	ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
 	if (ret)
 		pr_err ("hx4700: Failed to request GPIOs.\n");
-- 
1.7.3.4