[PATCH 3/3] ARM: MMP: add 88pm860x battery-charger support

[Haojian Zhuang]

On Sun, May 6, 2012 at 10:26 AM, Anton Vorontsov
<anton.vorontsov at linaro.org> wrote:
> On Tue, Mar 27, 2012 at 01:25:46PM +0800, Jett.Zhou wrote:
>> Add 88pm860x chg_desc platform data for ttc platform.
>>
>> Signed-off-by: Jett.Zhou <jtzhou at marvell.com>
>> ---
>
> May I have an ack from ARM/MMP folks to take this into battery tree
> with the rest of the series?
>
> Thanks!
>
>>  arch/arm/mach-mmp/ttc_dkb.c |   37 +++++++++++++++++++++++++++++++++++++
>>  1 files changed, 37 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
>> index 5ac5d58..4e18be7 100644
>> --- a/arch/arm/mach-mmp/ttc_dkb.c
>> +++ b/arch/arm/mach-mmp/ttc_dkb.c
>> @@ -17,6 +17,9 @@
>>  #include <linux/interrupt.h>
>>  #include <linux/i2c/pca953x.h>
>>  #include <linux/gpio.h>
>> +#include <linux/mfd/88pm860x.h>
>> +#include <linux/regulator/consumer.h>
>> +#include <linux/power/charger-manager.h>
>>
>>  #include <asm/mach-types.h>
>>  #include <asm/mach/arch.h>
>> @@ -134,8 +137,42 @@ static struct pca953x_platform_data max7312_data[] = {
>>       },
>>  };
>>
>> +static char *ttc_psy_chg_stat[] = {"usb", NULL};
>> +/*
>> + * Temperature can be handled by battery monitor base on interrupt
>> + * scheme, so dummy it to make sure charger-manager initialize ok.
>> + */
>> +static int dummy_temp_out_of_range(int *mC)
>> +{
>> +     *mC = 2500;
>> +     return 0;
>> +}
>> +
>> +struct charger_desc chg_desc_data = {
>> +     .polling_mode           = CM_POLL_ALWAYS,
>> +     .polling_interval_ms    = 180000,
>> +     .battery_present        = CM_FUEL_GAUGE,
>> +     .psy_charger_stat       = &ttc_psy_chg_stat[0],
>> +     .psy_fuel_gauge         = "battery-monitor",
>> +     .temperature_out_of_range       = dummy_temp_out_of_range,
>> +};
>> +m ARM/MMP folks to take this into battery tree
with the rest of the se
>> +static struct pm860x_platform_data ttc_dkb_pm8607_info = {
>> +     .chg_desc       = &chg_desc_data,
>> +     .companion_addr = 0x11,
>> +     .irq_mode       = 0,
>> +     .irq_base       = IRQ_BOARD_START,
>> +     .i2c_port       = GI2C_PORT,
>> +};
>> +
>>  static struct i2c_board_info ttc_dkb_i2c_info[] = {
>>       {
>> +             .type           = "88PM860x",
>> +             .addr           = 0x34,
>> +             .platform_data  = &ttc_dkb_pm8607_info,
>> +             .irq            = IRQ_PXA910_PMIC_INT,
>> +     },
>> +     {
>>               .type           = "max7312",
>>               .addr           = 0x23,m ARM/MMP folks to take this into battery tree
with the rest of the se
>>               .irq            = MMP_GPIO_TO_IRQ(80),
>> --
>> 1.7.0.4m ARM/MMP folks to take this into battery tree
with the rest of the se
>
> --
> Anton Vorontsov
> Email: cbouatmailru at gmail.com

Acked-by: Haojian Zhuang <haojian.zhuang at gmail.com>