[PATCH 3/3] ARM: MMP: add 88pm860x battery-charger support

[Raul Xiong]

2012/3/27 Jett.Zhou <jtzhou at marvell.com>
>
> Add 88pm860x chg_desc platform data for ttc platform.
>
> Signed-off-by: Jett.Zhou <jtzhou at marvell.com>
> ---
>  arch/arm/mach-mmp/ttc_dkb.c |   37 +++++++++++++++++++++++++++++++++++++
>  1 files changed, 37 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
> index 5ac5d58..4e18be7 100644
> --- a/arch/arm/mach-mmp/ttc_dkb.c
> +++ b/arch/arm/mach-mmp/ttc_dkb.c
> @@ -17,6 +17,9 @@
>  #include <linux/interrupt.h>
>  #include <linux/i2c/pca953x.h>
>  #include <linux/gpio.h>
> +#include <linux/mfd/88pm860x.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/power/charger-manager.h>
>
>  #include <asm/mach-types.h>
>  #include <asm/mach/arch.h>
> @@ -134,8 +137,42 @@ static struct pca953x_platform_data max7312_data[] =
> {
>        },
>  };
>
> +static char *ttc_psy_chg_stat[] = {"usb", NULL};
> +/*
> + * Temperature can be handled by battery monitor base on interrupt
> + * scheme, so dummy it to make sure charger-manager initialize ok.
> + */
> +static int dummy_temp_out_of_range(int *mC)
> +{
> +       *mC = 2500;
> +       return 0;
> +}
> +
> +struct charger_desc chg_desc_data = {
> +       .polling_mode           = CM_POLL_ALWAYS,
> +       .polling_interval_ms    = 180000,
> +       .battery_present        = CM_FUEL_GAUGE,
> +       .psy_charger_stat       = &ttc_psy_chg_stat[0],
> +       .psy_fuel_gauge         = "battery-monitor",
> +       .temperature_out_of_range       = dummy_temp_out_of_range,
> +};
> +
> +static struct pm860x_platform_data ttc_dkb_pm8607_info = {
> +       .chg_desc       = &chg_desc_data,
> +       .companion_addr = 0x11,
> +       .irq_mode       = 0,
> +       .irq_base       = IRQ_BOARD_START,
> +       .i2c_port       = GI2C_PORT,
> +};
> +
>  static struct i2c_board_info ttc_dkb_i2c_info[] = {
>        {
> +               .type           = "88PM860x",
> +               .addr           = 0x34,
> +               .platform_data  = &ttc_dkb_pm8607_info,
> +               .irq            = IRQ_PXA910_PMIC_INT,
> +       },
> +       {
>                .type           = "max7312",
>                .addr           = 0x23,
>                .irq            = MMP_GPIO_TO_IRQ(80),
> --
> 1.7.0.4
>

Acked-by: Raul Xiong <raulxiong at gmail.com>

>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel