[PATCH v2 1/3] ARM: imx: Add common imx cpuidle init functionality.

Rob Lee rob.lee at linaro.org
Wed May 2 09:59:11 EDT 2012


Shawn,

On Tue, May 1, 2012 at 10:13 PM, Shawn Guo <shawn.guo at linaro.org> wrote:
> On Tue, May 01, 2012 at 09:12:38PM -0500, Robert Lee wrote:
>> Add common cpuidle init functionality that can be used by various
>> imx platforms.
>>
>> Signed-off-by: Robert Lee <rob.lee at linaro.org>
>> ---
>>  arch/arm/plat-mxc/Makefile               |    1 +
>>  arch/arm/plat-mxc/cpuidle.c              |   80 ++++++++++++++++++++++++++++++
>>  arch/arm/plat-mxc/include/mach/cpuidle.h |   22 ++++++++
>>  3 files changed, 103 insertions(+)
>>  create mode 100644 arch/arm/plat-mxc/cpuidle.c
>>  create mode 100644 arch/arm/plat-mxc/include/mach/cpuidle.h
>>
>> diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
>> index e81290c..63b064b 100644
>> --- a/arch/arm/plat-mxc/Makefile
>> +++ b/arch/arm/plat-mxc/Makefile
>> @@ -16,6 +16,7 @@ obj-$(CONFIG_MXC_ULPI) += ulpi.o
>>  obj-$(CONFIG_MXC_USE_EPIT) += epit.o
>>  obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
>>  obj-$(CONFIG_CPU_FREQ_IMX)    += cpufreq.o
>> +obj-$(CONFIG_CPU_IDLE) += cpuidle.o
>>  ifdef CONFIG_SND_IMX_SOC
>>  obj-y += ssi-fiq.o
>>  obj-y += ssi-fiq-ksym.o
>> diff --git a/arch/arm/plat-mxc/cpuidle.c b/arch/arm/plat-mxc/cpuidle.c
>> new file mode 100644
>> index 0000000..b7a5e1c
>> --- /dev/null
>> +++ b/arch/arm/plat-mxc/cpuidle.c
>> @@ -0,0 +1,80 @@
>> +/*
>> + * Copyright 2012 Freescale Semiconductor, Inc.
>> + * Copyright 2012 Linaro Ltd.
>> + *
>> + * The code contained herein is licensed under the GNU General Public
>> + * License. You may obtain a copy of the GNU General Public License
>> + * Version 2 or later at the following locations:
>> + *
>> + * http://www.opensource.org/licenses/gpl-license.html
>> + * http://www.gnu.org/copyleft/gpl.html
>> + */
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/io.h>
>> +#include <linux/cpuidle.h>
>> +#include <linux/hrtimer.h>
>> +#include <linux/err.h>
>> +#include <linux/slab.h>
>> +
>> +static struct cpuidle_device __percpu * imx_cpuidle_devices;
>> +
>> +void imx_cpuidle_devices_uninit(void)
>> +{
>> +     int cpu_id;
>> +     struct cpuidle_device *dev;
>> +
>> +     for_each_possible_cpu(cpu_id) {
>> +             dev = per_cpu_ptr(imx_cpuidle_devices, cpu_id);
>> +             cpuidle_unregister_device(dev);
>> +     }
>> +
>> +     free_percpu(imx_cpuidle_devices);
>> +}
>
> Does this function need to be exported?  I haven't seen it being
> used anywhere outside this file.  Also, can it be __init?
>

Yes to both for now and can be changed back if necessary in the future.

>> +
>> +int __init imx_cpuidle_init(struct cpuidle_driver *drv)
>> +{
>> +     struct cpuidle_device *dev;
>> +     int cpu_id, ret;
>> +
>> +     if (!drv || drv->state_count > CPUIDLE_STATE_MAX) {
>> +             pr_err("%s: Invalid Input\n", __func__);
>> +             return -EINVAL;
>> +     }
>> +
>> +     ret = cpuidle_register_driver(drv);
>> +     if (ret) {
>> +             pr_err("%s: Failed to register cpuidle driver with error: %d\n",
>> +                      __func__, ret);
>> +             return ret;
>> +     }
>> +
>> +     imx_cpuidle_devices = alloc_percpu(struct cpuidle_device);
>> +     if (imx_cpuidle_devices == NULL) {
>> +             ret = -ENOMEM;
>> +             goto unregister_drv;
>> +     }
>> +
>> +     /* initialize state data for each cpuidle_device */
>> +     for_each_possible_cpu(cpu_id) {
>> +             dev = per_cpu_ptr(imx_cpuidle_devices, cpu_id);
>> +             dev->cpu = cpu_id;
>> +             dev->state_count = drv->state_count;
>> +
>> +             ret = cpuidle_register_device(dev);
>> +             if (ret) {
>> +                     pr_err("%s: Failed to register cpu %u\n",
>> +                             __func__, cpu_id);
>
> Nit: print ret (error code) too?
>

I added the printing of the error code based on Sascha's suggestion in
v1 of this submission.

>> +                     goto uninit;
>> +             }
>> +     }
>> +
>> +     return 0;
>> +
>> +uninit:
>> +     imx_cpuidle_devices_uninit();
>> +
>> +unregister_drv:
>> +     cpuidle_unregister_driver(drv);
>> +     return ret;
>> +}
>> diff --git a/arch/arm/plat-mxc/include/mach/cpuidle.h b/arch/arm/plat-mxc/include/mach/cpuidle.h
>> new file mode 100644
>> index 0000000..8612510
>> --- /dev/null
>> +++ b/arch/arm/plat-mxc/include/mach/cpuidle.h
>> @@ -0,0 +1,22 @@
>> +/*
>> + * Copyright 2012 Freescale Semiconductor, Inc.
>> + * Copyright 2012 Linaro Ltd.
>> + *
>> + * The code contained herein is licensed under the GNU General Public
>> + * License. You may obtain a copy of the GNU General Public License
>> + * Version 2 or later at the following locations:
>> + *
>> + * http://www.opensource.org/licenses/gpl-license.html
>> + * http://www.gnu.org/copyleft/gpl.html
>> + */
>> +
>> +#include <linux/cpuidle.h>
>> +
>> +#ifdef CONFIG_CPU_IDLE
>> +extern void imx_cpuidle_devices_uninit(void);
>> +extern int imx_cpuidle_init(struct cpuidle_driver *drv);
>> +#else
>> +static inline void imx_cpuidle_devices_uninit(void) {}
>> +static inline int imx_cpuidle_init(struct cpuidle_driver *drv)
>> +{ return -ENODEV; }
>
> Nit: if it can not be in the same line with function name, we usually
> have it be:
>
> {
>        return -ENODEV;
> }

Understood.  I was just going by what I have seen used in other places
(like include/linux/cpuidle.h).

Thanks,
Rob

>
>> +#endif
>> --
>> 1.7.10
>>
>
> --
> Regards,
> Shawn



More information about the linux-arm-kernel mailing list