[PATCH 01/13] ARM: OMAP5: id: Add cpu id for ES versions
R Sricharan
r.sricharan at ti.com
Thu May 3 03:26:10 EDT 2012
Adding the OMAP5 ES1.0, 2.0 and OMAP5432 cpu revision
detection support.
Signed-off-by: R Sricharan <r.sricharan at ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
---
arch/arm/mach-omap2/control.h | 4 +++
arch/arm/mach-omap2/id.c | 47 +++++++++++++++++++++++++++++++++
arch/arm/plat-omap/include/plat/cpu.h | 23 ++++++++++++++-
3 files changed, 72 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index a406fd0..9daac6f 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -246,6 +246,10 @@
/* TI81XX CONTROL_DEVCONF register offsets */
#define TI81XX_CONTROL_DEVICE_ID (TI81XX_CONTROL_DEVCONF + 0x000)
+/* OMAP54XX CONTROL STATUS register */
+#define OMAP5XXX_CONTROL_STATUS 0x134
+#define OMAP5_DEVICETYPE_MASK (0x7 << 6)
+
/*
* REVISIT: This list of registers is not comprehensive - there are more
* that should be added.
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 0e79b7b..d2ec323 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -50,6 +50,11 @@ int omap_type(void)
val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
} else if (cpu_is_omap44xx()) {
val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS);
+ } else if (cpu_is_omap54xx()) {
+ val = omap_ctrl_readl(OMAP5XXX_CONTROL_STATUS);
+ val &= OMAP5_DEVICETYPE_MASK;
+ val >>= 6;
+ goto out;
} else {
pr_err("Cannot detect omap type!\n");
goto out;
@@ -500,6 +505,48 @@ void __init omap4xxx_check_revision(void)
((omap_rev() >> 12) & 0xf), ((omap_rev() >> 8) & 0xf));
}
+void __init omap5xxx_check_revision(void)
+{
+ u32 idcode;
+ u16 hawkeye;
+ u8 rev;
+
+ idcode = read_tap_reg(OMAP_TAP_IDCODE);
+ hawkeye = (idcode >> 12) & 0xffff;
+ rev = (idcode >> 28) & 0xff;
+ switch (hawkeye) {
+ case 0xb942:
+ switch (rev) {
+ case 0:
+ omap_revision = OMAP5430_REV_ES1_0;
+ break;
+ case 1:
+ omap_revision = OMAP5430_REV_ES2_0;
+ break;
+ default:
+ omap_revision = OMAP5430_REV_ES1_0;
+ }
+ break;
+
+ case 0xb998:
+ switch (rev) {
+ case 0:
+ omap_revision = OMAP5432_REV_ES1_0;
+ break;
+ default:
+ omap_revision = OMAP5432_REV_ES1_0;
+ }
+ break;
+
+ default:
+ /* Unknown default to latest silicon rev as default*/
+ omap_revision = OMAP5430_REV_ES2_0;
+ }
+
+ pr_info("OMAP%04x ES%d.0\n",
+ omap_rev() >> 16, ((omap_rev() >> 12) & 0xf));
+}
+
/*
* Set up things for map_io and processor detection later on. Gets called
* pretty much first thing from board init. For multi-omap, this gets
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index dc6a86b..5e57732 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -9,7 +9,7 @@
*
* Written by Tony Lindgren <tony.lindgren at nokia.com>
*
- * Added OMAP4 specific defines - Santosh Shilimkar<santosh.shilimkar at ti.com>
+ * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar at ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -70,6 +70,7 @@ unsigned int omap_rev(void);
* cpu_is_omap443x(): True for OMAP4430
* cpu_is_omap446x(): True for OMAP4460
* cpu_is_omap447x(): True for OMAP4470
+ * cpu_is_omap543x(): True for OMAP5430, OMAP5432
*/
#define GET_OMAP_CLASS (omap_rev() & 0xff)
@@ -121,6 +122,7 @@ IS_OMAP_CLASS(16xx, 0x16)
IS_OMAP_CLASS(24xx, 0x24)
IS_OMAP_CLASS(34xx, 0x34)
IS_OMAP_CLASS(44xx, 0x44)
+IS_OMAP_CLASS(54xx, 0x54)
IS_AM_CLASS(33xx, 0x33)
IS_TI_CLASS(81xx, 0x81)
@@ -132,6 +134,7 @@ IS_OMAP_SUBCLASS(363x, 0x363)
IS_OMAP_SUBCLASS(443x, 0x443)
IS_OMAP_SUBCLASS(446x, 0x446)
IS_OMAP_SUBCLASS(447x, 0x447)
+IS_OMAP_SUBCLASS(543x, 0x543)
IS_TI_SUBCLASS(816x, 0x816)
IS_TI_SUBCLASS(814x, 0x814)
@@ -154,6 +157,8 @@ IS_AM_SUBCLASS(335x, 0x335)
#define cpu_is_omap443x() 0
#define cpu_is_omap446x() 0
#define cpu_is_omap447x() 0
+#define cpu_is_omap54xx() 0
+#define cpu_is_omap543x() 0
#if defined(MULTI_OMAP1)
# if defined(CONFIG_ARCH_OMAP730)
@@ -299,6 +304,7 @@ IS_OMAP_TYPE(3517, 0x3517)
#define cpu_is_omap3517() 0
#define cpu_is_omap3430() 0
#define cpu_is_omap3630() 0
+#define cpu_is_omap5430() 0
/*
* Whether we have MULTI_OMAP1 or not, we still need to distinguish
@@ -393,11 +399,18 @@ IS_OMAP_TYPE(3517, 0x3517)
# define cpu_is_omap447x() is_omap447x()
# endif
+# if defined(CONFIG_ARCH_OMAP5)
+# undef cpu_is_omap54xx
+# undef cpu_is_omap543x
+# define cpu_is_omap54xx() is_omap54xx()
+# define cpu_is_omap543x() is_omap543x()
+#endif
+
/* Macros to detect if we have OMAP1 or OMAP2 */
#define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \
cpu_is_omap16xx())
#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \
- cpu_is_omap44xx())
+ cpu_is_omap44xx() || cpu_is_omap54xx())
/* Various silicon revisions for omap2 */
#define OMAP242X_CLASS 0x24200024
@@ -449,9 +462,15 @@ IS_OMAP_TYPE(3517, 0x3517)
#define OMAP447X_CLASS 0x44700044
#define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8))
+#define OMAP54XX_CLASS 0x54000054
+#define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
+#define OMAP5430_REV_ES2_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x20 << 8))
+#define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
+
void omap2xxx_check_revision(void);
void omap3xxx_check_revision(void);
void omap4xxx_check_revision(void);
+void omap5xxx_check_revision(void);
void omap3xxx_check_features(void);
void ti81xx_check_features(void);
void omap4xxx_check_features(void);
--
1.7.1
More information about the linux-arm-kernel
mailing list