[PATCH 2/2] serial: samsung: Fixed wrong comparison for baudclk_rate

Kyoungil Kim ki0351.kim at samsung.com
Sun May 20 04:49:31 EDT 2012

port->baudclk_rate should be compared to the rate of port->baudclk,
because port->baudclk_rate was assigned as the rate of port->baudclk previously.
So to check that the current baudclk rate is same as previous rate,
the target of comparison sholud be the rate of port->baudclk.

Signed-off-by: Jun-Ho, Yoon <junho78.yoon at samsung.com>
Signed-off-by: Kyoungil Kim <ki0351.kim at samsung.com>
 drivers/tty/serial/samsung.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 5668538..cefdd2d 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1013,10 +1013,10 @@ static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
 	 * a disturbance in the clock-rate over the change.
-	if (IS_ERR(port->clk))
+	if (IS_ERR(port->baudclk))
 		goto exit;
-	if (port->baudclk_rate == clk_get_rate(port->clk))
+	if (port->baudclk_rate == clk_get_rate(port->baudclk))
 		goto exit;
 	if (val == CPUFREQ_PRECHANGE) {

More information about the linux-arm-kernel mailing list