[PATCH V2 0/6] Bridging PCI to amba

[Alessandro Rubini]

V2: accepted comments I got on V1; rewritten the driver to be generic;
    made it tristate instead of boolean. Rebased on new next.


This patch set introduces use of AMBA devices under a PCI bridge.
The device table in the driver include all the devices that we'll be
able to run using AMBA drivers.

To compile AMBA under x86, though I need <asm/sizes.h>,
which is moved to <linux/sizes.h> as suggested earlier.

I'm hereby volunteering to handle the moving of the various users
of <asm/sizes.h> to <linux/sizes.h>; this set only moves the ARM core
files and the ones that I need under x86.

The whole patch set is sent to the same set of recipients:
all relevant lists, Russell King (for arm), Greg-KH (for uart) and
Arnd Bergmann (for generic include).

With this set in place (plus a clok API not included here) I have
4 serial ports working.

Success strings:
   spusa.root# uname -r
   3.4.0-next-20120528-00016-g1e5853d

   spusa.root# dmesg | grep ttyA
   amba-0000:03:00.5: ttyAMA0 at MMIO 0xcf400000 (irq = 64) is a PL011 rev3
   amba-0000:03:00.6: ttyAMA1 at MMIO 0xcec00000 (irq = 65) is a PL011 rev3
   amba-0000:03:00.7: ttyAMA2 at MMIO 0xce400000 (irq = 66) is a PL011 rev3
   amba-0000:04:00.5: ttyAMA3 at MMIO 0xd3400000 (irq = 71) is a PL011 rev3

   spusa.root# grep -B2 pl011 /proc/iomem
           ce400000-ce7fffff : 0000:03:00.7
             ce400000-ce400fff : amba-0000:03:00.7
             ce400000-ce400fff : uart-pl011
   --
           cec00000-ceffffff : 0000:03:00.6
             cec00000-cec00fff : amba-0000:03:00.6
             cec00000-cec00fff : uart-pl011
   --
           cf400000-cf7fffff : 0000:03:00.5
             cf400000-cf400fff : amba-0000:03:00.5
             cf400000-cf400fff : uart-pl011
   --
           d3400000-d37fffff : 0000:04:00.5
             d3400000-d3400fff : amba-0000:04:00.5
             d3400000-d3400fff : uart-pl011


Alessandro Rubini (6):
  sizes.h: move from asm-generic to <linux/sizes.h>
  amba: use the new linux/sizes.h
  ARM: use the new linux/sizes.h
  serial: use the new linux/sizes.h
  x86: add CONFIG_ARM_AMBA, selected by STA2X11
  drivers/amba: add support for a PCI bridge

 arch/arm/include/asm/memory.h   |    2 +-
 arch/arm/mm/dma-mapping.c       |    2 +-
 arch/arm/mm/init.c              |    2 +-
 arch/arm/mm/ioremap.c           |    2 +-
 arch/arm/mm/mmu.c               |    2 +-
 arch/x86/Kconfig                |    4 ++
 drivers/Kconfig                 |    2 +
 drivers/amba/Kconfig            |   10 ++++
 drivers/amba/Makefile           |    1 +
 drivers/amba/bus.c              |    2 +-
 drivers/amba/pci-amba.c         |   95 +++++++++++++++++++++++++++++++++++++++
 drivers/tty/serial/amba-pl011.c |    2 +-
 include/asm-generic/sizes.h     |   49 +-------------------
 include/linux/sizes.h           |   47 +++++++++++++++++++
 14 files changed, 168 insertions(+), 54 deletions(-)
 create mode 100644 drivers/amba/Kconfig
 create mode 100644 drivers/amba/pci-amba.c
 create mode 100644 include/linux/sizes.h

-- 
1.7.7.2