[PATCH 2/2] ARM: mmp: add PM support for mmp2
Chao Xie
chao.xie at marvell.com
Wed May 2 21:46:23 EDT 2012
MMP2 can enter system sleep level during suspend.
It can be waken up by PMIC interrupt, RTC/ALARM.
Signed-off-by: Chao Xie <chao.xie at marvell.com>
---
arch/arm/mach-mmp/Makefile | 4 +
arch/arm/mach-mmp/include/mach/pm-mmp2.h | 60 ++++++++
arch/arm/mach-mmp/irq-mmp2.c | 51 +++++++
arch/arm/mach-mmp/pm-mmp2.c | 217 ++++++++++++++++++++++++++++++
4 files changed, 332 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-mmp/include/mach/pm-mmp2.h
create mode 100644 arch/arm/mach-mmp/pm-mmp2.c
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 4fc0ff5..fb96222 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -9,6 +9,10 @@ obj-$(CONFIG_CPU_PXA168) += pxa168.o irq-pxa168.o
obj-$(CONFIG_CPU_PXA910) += pxa910.o irq-pxa168.o
obj-$(CONFIG_CPU_MMP2) += mmp2.o irq-mmp2.o sram.o
+ifeq ($(CONFIG_PM),y)
+obj-$(CONFIG_CPU_MMP2) += pm-mmp2.o
+endif
+
# board support
obj-$(CONFIG_MACH_ASPENITE) += aspenite.o
obj-$(CONFIG_MACH_ZYLONITE2) += aspenite.o
diff --git a/arch/arm/mach-mmp/include/mach/pm-mmp2.h b/arch/arm/mach-mmp/include/mach/pm-mmp2.h
new file mode 100644
index 0000000..0fb69f4
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/pm-mmp2.h
@@ -0,0 +1,60 @@
+/*
+ * MMP2 Power Management Routines
+ *
+ * This software program is licensed subject to the GNU General Public License
+ * (GPL).Version 2,June 1991, available at http://www.fsf.org/copyleft/gpl.html
+ *
+ * (C) Copyright 2010 Marvell International Ltd.
+ * All Rights Reserved
+ */
+
+#ifndef __MMP2_PM_H__
+#define __MMP2_PM_H__
+
+#include <mach/addr-map.h>
+
+#define APMU_PJ_IDLE_CFG APMU_REG(0x018)
+#define APMU_PJ_IDLE_CFG_PJ_IDLE (1 << 1)
+#define APMU_PJ_IDLE_CFG_PJ_PWRDWN (1 << 5)
+#define APMU_PJ_IDLE_CFG_PWR_SW(x) ((x) << 16)
+#define APMU_PJ_IDLE_CFG_L2_PWR_SW (1 << 19)
+#define APMU_PJ_IDLE_CFG_ISO_MODE_CNTRL_MASK (3 << 28)
+
+#define APMU_SRAM_PWR_DWN APMU_REG(0x08c)
+
+#define MPMU_SCCR MPMU_REG(0x038)
+#define MPMU_PCR_PJ MPMU_REG(0x1000)
+#define MPMU_PCR_PJ_AXISD (1 << 31)
+#define MPMU_PCR_PJ_SLPEN (1 << 29)
+#define MPMU_PCR_PJ_SPSD (1 << 28)
+#define MPMU_PCR_PJ_DDRCORSD (1 << 27)
+#define MPMU_PCR_PJ_APBSD (1 << 26)
+#define MPMU_PCR_PJ_INTCLR (1 << 24)
+#define MPMU_PCR_PJ_SLPWP0 (1 << 23)
+#define MPMU_PCR_PJ_SLPWP1 (1 << 22)
+#define MPMU_PCR_PJ_SLPWP2 (1 << 21)
+#define MPMU_PCR_PJ_SLPWP3 (1 << 20)
+#define MPMU_PCR_PJ_VCTCXOSD (1 << 19)
+#define MPMU_PCR_PJ_SLPWP4 (1 << 18)
+#define MPMU_PCR_PJ_SLPWP5 (1 << 17)
+#define MPMU_PCR_PJ_SLPWP6 (1 << 16)
+#define MPMU_PCR_PJ_SLPWP7 (1 << 15)
+
+#define MPMU_PLL2_CTRL1 MPMU_REG(0x0414)
+#define MPMU_CGR_PJ MPMU_REG(0x1024)
+#define MPMU_WUCRM_PJ MPMU_REG(0x104c)
+#define MPMU_WUCRM_PJ_WAKEUP(x) (1 << (x))
+#define MPMU_WUCRM_PJ_RTC_ALARM (1 << 17)
+
+enum {
+ POWER_MODE_ACTIVE = 0,
+ POWER_MODE_CORE_INTIDLE,
+ POWER_MODE_CORE_EXTIDLE,
+ POWER_MODE_APPS_IDLE,
+ POWER_MODE_APPS_SLEEP,
+ POWER_MODE_CHIP_SLEEP,
+ POWER_MODE_SYS_SLEEP,
+};
+
+extern void mmp2_pm_enter_lowpower_mode(int state);
+#endif
diff --git a/arch/arm/mach-mmp/irq-mmp2.c b/arch/arm/mach-mmp/irq-mmp2.c
index 7895d27..efce610 100644
--- a/arch/arm/mach-mmp/irq-mmp2.c
+++ b/arch/arm/mach-mmp/irq-mmp2.c
@@ -14,13 +14,62 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/interrupt.h>
#include <mach/irqs.h>
#include <mach/regs-icu.h>
+#include <mach/pm-mmp2.h>
#include <mach/mmp2.h>
#include "common.h"
+int mmp2_set_wake(struct irq_data *d, unsigned int on)
+{
+ int irq = d->irq;
+ struct irq_desc *desc = irq_to_desc(irq);
+ unsigned long data = 0;
+
+ if (unlikely(irq >= nr_irqs)) {
+ pr_err("IRQ nubmers are out of boundary!\n");
+ return -EINVAL;
+ }
+
+ if (on) {
+ if (desc->action)
+ desc->action->flags |= IRQF_NO_SUSPEND;
+ } else {
+ if (desc->action)
+ desc->action->flags &= ~IRQF_NO_SUSPEND;
+ }
+
+ /* enable wakeup sources */
+ switch (irq) {
+ case IRQ_MMP2_RTC:
+ case IRQ_MMP2_RTC_ALARM:
+ data = MPMU_WUCRM_PJ_WAKEUP(4) | MPMU_WUCRM_PJ_RTC_ALARM;
+ break;
+ case IRQ_MMP2_PMIC:
+ data = MPMU_WUCRM_PJ_WAKEUP(7);
+ break;
+ case IRQ_MMP2_MMC2:
+ /* mmc use WAKEUP2, same as GPIO wakeup source */
+ data = MPMU_WUCRM_PJ_WAKEUP(2);
+ break;
+ }
+ if (on) {
+ if (data) {
+ data |= __raw_readl(MPMU_WUCRM_PJ);
+ __raw_writel(data, MPMU_WUCRM_PJ);
+ }
+ } else {
+ if (data) {
+ data = ~data & __raw_readl(MPMU_WUCRM_PJ);
+ __raw_writel(data, MPMU_WUCRM_PJ);
+ }
+ }
+ return 0;
+}
+
static void icu_mask_irq(struct irq_data *d)
{
uint32_t r = __raw_readl(ICU_INT_CONF(d->irq));
@@ -42,6 +91,7 @@ static struct irq_chip icu_irq_chip = {
.irq_mask = icu_mask_irq,
.irq_mask_ack = icu_mask_irq,
.irq_unmask = icu_unmask_irq,
+ .irq_set_wake = mmp2_set_wake,
};
static void pmic_irq_ack(struct irq_data *d)
@@ -91,6 +141,7 @@ static struct irq_chip _name_##_irq_chip = { \
.name = #_name_, \
.irq_mask = _name_##_mask_irq, \
.irq_unmask = _name_##_unmask_irq, \
+ .irq_set_wake = mmp2_set_wake \
}
SECOND_IRQ_CHIP(pmic, IRQ_MMP2_PMIC_BASE, MMP2_ICU_INT4);
diff --git a/arch/arm/mach-mmp/pm-mmp2.c b/arch/arm/mach-mmp/pm-mmp2.c
new file mode 100644
index 0000000..1ca7e43
--- /dev/null
+++ b/arch/arm/mach-mmp/pm-mmp2.c
@@ -0,0 +1,217 @@
+/*
+ * MMP2 Power Management Routines
+ *
+ * This software program is licensed subject to the GNU General Public License
+ * (GPL).Version 2,June 1991, available at http://www.fsf.org/copyleft/gpl.html
+ *
+ * (C) Copyright 2012 Marvell International Ltd.
+ * All Rights Reserved
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/suspend.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <mach/cputype.h>
+#include <mach/addr-map.h>
+#include <mach/pm-mmp2.h>
+#include <mach/regs-icu.h>
+#include <mach/regs-ciu.h>
+
+static void pm_scu_clk_disable(void)
+{
+ unsigned int val;
+
+ /* close AXI fabric clock gate */
+ __raw_writel(0x0, CIU_REG(0x64));
+ __raw_writel(0x0, CIU_REG(0x68));
+
+ /* close MCB master clock gate */
+ val = __raw_readl(CIU_REG(0x1c));
+ val |= 0xf0;
+ __raw_writel(val, CIU_REG(0x1c));
+
+ return ;
+}
+
+static void pm_scu_clk_enable(void)
+{
+ unsigned int val;
+
+ /* open AXI fabric clock gate */
+ __raw_writel(0x03003003, CIU_REG(0x64));
+ __raw_writel(0x00303030, CIU_REG(0x68));
+
+ /* open MCB master clock gate */
+ val = __raw_readl(CIU_REG(0x1c));
+ val &= ~(0xf0);
+ __raw_writel(val, CIU_REG(0x1c));
+
+ return ;
+}
+
+static void pm_mpmu_clk_disable(void)
+{
+ /*
+ * disable clocks in MPMU_CGR_PJ register
+ * except clock for APMU_PLL1, APMU_PLL1_2 and AP_26M
+ */
+ __raw_writel(0x0000a010, MPMU_CGR_PJ);
+}
+
+static void pm_mpmu_clk_enable(void)
+{
+ unsigned int val;
+
+ __raw_writel(0xdffefffe, MPMU_CGR_PJ);
+ val = __raw_readl(MPMU_PLL2_CTRL1);
+ val |= (1 << 29);
+ __raw_writel(val, MPMU_PLL2_CTRL1);
+
+ return ;
+}
+
+void mmp2_pm_enter_lowpower_mode(int state)
+{
+ uint32_t idle_cfg, apcr;
+
+ idle_cfg = __raw_readl(APMU_PJ_IDLE_CFG);
+ apcr = __raw_readl(MPMU_PCR_PJ);
+ apcr &= ~(MPMU_PCR_PJ_SLPEN | MPMU_PCR_PJ_DDRCORSD | MPMU_PCR_PJ_APBSD
+ | MPMU_PCR_PJ_AXISD | MPMU_PCR_PJ_VCTCXOSD | (1 << 13));
+ idle_cfg &= ~APMU_PJ_IDLE_CFG_PJ_IDLE;
+
+ switch (state) {
+ case POWER_MODE_SYS_SLEEP:
+ apcr |= MPMU_PCR_PJ_SLPEN; /* set the SLPEN bit */
+ apcr |= MPMU_PCR_PJ_VCTCXOSD; /* set VCTCXOSD */
+ /* fall through */
+ case POWER_MODE_CHIP_SLEEP:
+ apcr |= MPMU_PCR_PJ_SLPEN;
+ /* fall through */
+ case POWER_MODE_APPS_SLEEP:
+ apcr |= MPMU_PCR_PJ_APBSD; /* set APBSD */
+ /* fall through */
+ case POWER_MODE_APPS_IDLE:
+ apcr |= MPMU_PCR_PJ_AXISD; /* set AXISDD bit */
+ apcr |= MPMU_PCR_PJ_DDRCORSD; /* set DDRCORSD bit */
+ idle_cfg |= APMU_PJ_IDLE_CFG_PJ_PWRDWN; /* PJ power down */
+ apcr |= MPMU_PCR_PJ_SPSD;
+ /* fall through */
+ case POWER_MODE_CORE_EXTIDLE:
+ idle_cfg |= APMU_PJ_IDLE_CFG_PJ_IDLE; /* set the IDLE bit */
+ idle_cfg &= ~APMU_PJ_IDLE_CFG_ISO_MODE_CNTRL_MASK;
+ idle_cfg |= APMU_PJ_IDLE_CFG_PWR_SW(3)
+ | APMU_PJ_IDLE_CFG_L2_PWR_SW;
+ break;
+ case POWER_MODE_CORE_INTIDLE:
+ apcr &= ~MPMU_PCR_PJ_SPSD;
+ break;
+ }
+
+ /* set reserve bits */
+ apcr |= (1 << 30) | (1 << 25);
+
+ /* finally write the registers back */
+ __raw_writel(idle_cfg, APMU_PJ_IDLE_CFG);
+ __raw_writel(apcr, MPMU_PCR_PJ); /* 0xfe086000 */
+}
+
+static int mmp2_pm_enter(suspend_state_t state)
+{
+ int temp;
+
+ temp = __raw_readl(MMP2_ICU_INT4_MASK);
+ if (temp & (1 << 1)) {
+ printk(KERN_ERR "%s: PMIC interrupt is handling\n", __func__);
+ return -EAGAIN;
+ }
+
+ temp = __raw_readl(APMU_SRAM_PWR_DWN);
+ temp |= ((1 << 19) | (1 << 18));
+ __raw_writel(temp, APMU_SRAM_PWR_DWN);
+ pm_mpmu_clk_disable();
+ pm_scu_clk_disable();
+
+ printk(KERN_INFO "%s: before suspend\n", __func__);
+ cpu_do_idle();
+ printk(KERN_INFO "%s: after suspend\n", __func__);
+
+ pm_mpmu_clk_enable(); /* enable clocks in MPMU */
+ pm_scu_clk_enable(); /* enable clocks in SCU */
+
+ return 0;
+}
+
+/*
+ * Called after processes are frozen, but before we shut down devices.
+ */
+static int mmp2_pm_prepare(void)
+{
+ mmp2_pm_enter_lowpower_mode(POWER_MODE_SYS_SLEEP);
+
+ return 0;
+}
+
+/*
+ * Called after devices are re-setup, but before processes are thawed.
+ */
+static void mmp2_pm_finish(void)
+{
+ mmp2_pm_enter_lowpower_mode(POWER_MODE_CORE_INTIDLE);
+}
+
+static int mmp2_pm_valid(suspend_state_t state)
+{
+ return ((state == PM_SUSPEND_STANDBY) || (state == PM_SUSPEND_MEM));
+}
+
+/*
+ * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
+ */
+static const struct platform_suspend_ops mmp2_pm_ops = {
+ .valid = mmp2_pm_valid,
+ .prepare = mmp2_pm_prepare,
+ .enter = mmp2_pm_enter,
+ .finish = mmp2_pm_finish,
+};
+
+static int __init mmp2_pm_init(void)
+{
+ uint32_t apcr;
+
+ if (!cpu_is_mmp2())
+ return -EIO;
+
+ suspend_set_ops(&mmp2_pm_ops);
+
+ /*
+ * Set bit 0, Slow clock Select 32K clock input instead of VCXO
+ * VCXO is chosen by default, which would be disabled in suspend
+ */
+ __raw_writel(0x5, MPMU_SCCR);
+
+ /*
+ * Clear bit 23 of CIU_CPU_CONF
+ * direct PJ4 to DDR access through Memory Controller slow queue
+ * fast queue has issue and cause lcd will flick
+ */
+ __raw_writel(__raw_readl(CIU_REG(0x8)) & ~(0x1 << 23), CIU_REG(0x8));
+
+ /* Clear default low power control bit */
+ apcr = __raw_readl(MPMU_PCR_PJ);
+ apcr &= ~(MPMU_PCR_PJ_SLPEN | MPMU_PCR_PJ_DDRCORSD
+ | MPMU_PCR_PJ_APBSD | MPMU_PCR_PJ_AXISD | 1 << 13);
+ __raw_writel(apcr, MPMU_PCR_PJ);
+
+ return 0;
+}
+
+late_initcall(mmp2_pm_init);
--
1.7.0.4
More information about the linux-arm-kernel
mailing list