[PATCHv2 13/19] ARM: OMAP4: PM: Mark the PPI and SPI interrupts as non-secure for GP

[Tero Kristo]

On Wed, 2012-05-16 at 16:48 -0700, Kevin Hilman wrote:
> Tero Kristo <t-kristo at ti.com> writes:
> 
> > From: Axel Haslam <axelhaslam at gmail.com>
> >
> > ROM code restores part of the GIC context during wakeup from device
> > off mode from the SAR RAM. If the PPI and SPI interrupts are not
> > marked as non-secure on GP chips, this crashes the device during
> > wakeup, thus mark them as non-secure.
> >
> > Signed-off-by: Axel Haslam <axelhaslam at gmail.com>
> > [t-kristo at ti.com: fixed commit message, merged multiple patches to one]
> > Signed-off-by: Tero Kristo <t-kristo at ti.com>
> > ---
> >  arch/arm/mach-omap2/common.h           |    1 +
> >  arch/arm/mach-omap2/omap-wakeupgen.c   |   21 +++++++++++++++++++++
> >  arch/arm/mach-omap2/omap4-common.c     |    5 +++++
> >  arch/arm/mach-omap2/omap4-sar-layout.h |    3 +++
> >  4 files changed, 30 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
> > index 48d1ebe..0fbb4e2 100644
> > --- a/arch/arm/mach-omap2/common.h
> > +++ b/arch/arm/mach-omap2/common.h
> > @@ -200,6 +200,7 @@ static inline void __iomem *omap4_get_scu_base(void)
> >  
> >  extern void __init gic_init_irq(void);
> >  extern void gic_dist_disable(void);
> > +extern u32 gic_readl(u32 offset, u8 idx);
> >  extern void omap_smc1(u32 fn, u32 arg);
> >  extern void __iomem *omap4_get_sar_ram_base(void);
> >  extern void omap_do_wfi(void);
> > diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
> > index 805d08d..b2165e4 100644
> > --- a/arch/arm/mach-omap2/omap-wakeupgen.c
> > +++ b/arch/arm/mach-omap2/omap-wakeupgen.c
> > @@ -41,6 +41,7 @@
> >  #define CPU_ENA_OFFSET		0x400
> >  #define CPU0_ID			0x0
> >  #define CPU1_ID			0x1
> > +#define GIC_ISR_NON_SECURE	0xffffffff
> 
> nit: alignment with preceeding #defines

Will fix that.

> 
> >  static void __iomem *wakeupgen_base;
> >  static void __iomem *sar_base;
> > @@ -387,6 +388,7 @@ int __init omap_wakeupgen_init(void)
> >  {
> >  	int i;
> >  	unsigned int boot_cpu = smp_processor_id();
> > +	int max_spi_reg;
> >  
> >  	/* Not supported on OMAP4 ES1.0 silicon */
> >  	if (omap_rev() == OMAP4430_REV_ES1_0) {
> > @@ -422,6 +424,25 @@ int __init omap_wakeupgen_init(void)
> >  	for (i = 0; i < NR_IRQS; i++)
> >  		irq_target_cpu[i] = boot_cpu;
> >  
> > +	/*
> > +	 * Find out how many interrupts are supported.
> > +	 * OMAP4 supports max of 128 SPIs where as GIC can support
> > +	 * up to 1020 interrupt sources. On OMAP4, maximum SPIs are
> > +	 * fused in DIST_CTR bit-fields as 128. Hence the code is safe
> > +	 * from reserved register writes since its well within 1020.
> > +	 */
> > +	max_spi_reg = gic_readl(GIC_DIST_CTR, 0) & 0x1f;
> > +
> > +	if (omap_type() == OMAP2_DEVICE_TYPE_GP) {
> > +		sar_base = ioremap(OMAP44XX_SAR_RAM_BASE, SZ_16K);
> > +		sar_writel(GIC_ISR_NON_SECURE, ICDISR_CPU0_OFFSET, 0);
> > +		sar_writel(GIC_ISR_NON_SECURE, ICDISR_CPU1_OFFSET, 0);
> > +		for (i = 0; i < max_spi_reg; i++)
> > +			sar_writel(GIC_ISR_NON_SECURE, ICDISR_SPI_OFFSET, i);
> 
> The above 4 lines are begging for some comments (something like the
> changelog).  Since later in the series more stuff is added here, the end
> result has some readability problems.

Will add.

> 
> > +		iounmap(sar_base);
> > +		sar_base = NULL;
> > +	}
> >  	irq_hotplug_init();
> >  	irq_pm_init();
> >  
> > diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
> > index 7ea4652..f6019f6 100644
> > --- a/arch/arm/mach-omap2/omap4-common.c
> > +++ b/arch/arm/mach-omap2/omap4-common.c
> > @@ -112,6 +112,11 @@ void gic_dist_disable(void)
> >  		__raw_writel(0x0, gic_dist_base_addr + GIC_DIST_CTRL);
> >  }
> >  
> > +u32 gic_readl(u32 offset, u8 idx)
> > +{
> 
> probably want an 'if (gic_dist_base_addr)' like gic_dist_disable() 

Yea, will add that.

> 
> > +	return __raw_readl(gic_dist_base_addr + offset + 4 * idx);
> > +}
> > +
> >  #ifdef CONFIG_CACHE_L2X0
> >  
> >  void __iomem *omap4_get_l2cache_base(void)
> > diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h
> > index eef2839..0056667 100644
> > --- a/arch/arm/mach-omap2/omap4-sar-layout.h
> > +++ b/arch/arm/mach-omap2/omap4-sar-layout.h
> > @@ -85,6 +85,9 @@
> >  #define SAR_BACKUP_STATUS_OFFSET		(SAR_BANK3_OFFSET + 0x500)
> >  #define SAR_SECURE_RAM_SIZE_OFFSET		(SAR_BANK3_OFFSET + 0x504)
> >  #define SAR_SECRAM_SAVED_AT_OFFSET		(SAR_BANK3_OFFSET + 0x508)
> > +#define ICDISR_CPU0_OFFSET			(SAR_BANK3_OFFSET + 0x50c)
> > +#define ICDISR_CPU1_OFFSET			(SAR_BANK3_OFFSET + 0x510)
> > +#define ICDISR_SPI_OFFSET			(SAR_BANK3_OFFSET + 0x514)
> 
> SAR_ prefix?

Will add that too.

-Tero

> 
> >  /* WakeUpGen save restore offset from OMAP44XX_SAR_RAM_BASE */
> >  #define WAKEUPGENENB_OFFSET_CPU0		(SAR_BANK3_OFFSET + 0x684)
> 
> Kevin