[PATCH 02/13] ARM: OMAP5: Add minimal support for OMAP5430 SOC
Roger Quadros
rogerq at ti.com
Thu May 10 07:58:02 EDT 2012
Hi,
On 05/03/2012 10:26 AM, R Sricharan wrote:
> OMAP5430 is Texas Instrument's SOC based on ARM Cortex-A15 SMP
> architecture. It's a dual core SOC with GIC used for interrupt
> handling and with an integrated L2 cache controller.
>
> OMAP5432 is another variant of OMAP5430, with a
> memory controller supporting DDR3 and SATA.
>
> Patch includes:
> - The machine specific headers and sources updates.
> - Platform header updates.
> - Minimum initialisation support for serial.
> - IO table init
>
> Signed-off-by: R Sricharan <r.sricharan at ti.com>
> Signed-off-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
> ---
> arch/arm/mach-omap2/Makefile | 26 ++++++++++----
> arch/arm/mach-omap2/clock.c | 3 +-
> arch/arm/mach-omap2/cminst44xx.h | 2 +-
> arch/arm/mach-omap2/common.c | 24 +++++++++++++
> arch/arm/mach-omap2/common.h | 11 ++++++
> arch/arm/mach-omap2/include/mach/debug-macro.S | 8 ++--
> arch/arm/mach-omap2/io.c | 44 ++++++++++++++++++++++++
> arch/arm/mach-omap2/iomap.h | 27 ++++++++++++++
> arch/arm/mach-omap2/prcm.c | 2 +-
> arch/arm/mach-omap2/prm2xxx_3xxx.h | 5 ++-
> arch/arm/plat-omap/Makefile | 4 +--
> arch/arm/plat-omap/include/plat/clkdev_omap.h | 1 +
> arch/arm/plat-omap/include/plat/clock.h | 4 ++-
> arch/arm/plat-omap/include/plat/hardware.h | 1 +
> arch/arm/plat-omap/include/plat/multi.h | 9 +++++
> arch/arm/plat-omap/include/plat/omap54xx.h | 32 +++++++++++++++++
> arch/arm/plat-omap/include/plat/serial.h | 10 +++++
> arch/arm/plat-omap/include/plat/uncompress.h | 6 +++
> arch/arm/plat-omap/sram.c | 11 +++++-
> 19 files changed, 208 insertions(+), 22 deletions(-)
> create mode 100644 arch/arm/plat-omap/include/plat/omap54xx.h
>
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index 669e2b1..fbb6b3d 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -16,6 +16,7 @@ secure-common = omap-smc.o omap-secure.o
> obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
> obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
> obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
> +obj-$(CONFIG_ARCH_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common)
>
> ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
> obj-y += mcbsp.o
> @@ -27,8 +28,10 @@ obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
>
> obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
> obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
> -obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o
> -obj-$(CONFIG_ARCH_OMAP4) += sleep44xx.o
> +omap-4-5-common = omap4-common.o omap-wakeupgen.o \
> + sleep44xx.o
> +obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common)
> +obj-$(CONFIG_ARCH_OMAP5) += $(omap-4-5-common)
>
> plus_sec := $(call as-instr,.arch_extension sec,+sec)
> AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
> @@ -68,6 +71,7 @@ obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
> obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
> obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o
> obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o
> +obj-$(CONFIG_ARCH_OMAP5) += omap-mpuss-lowpower.o
> obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o
> obj-$(CONFIG_PM_DEBUG) += pm-debug.o
> obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o
> @@ -87,9 +91,11 @@ obj-y += prm_common.o
> obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
> obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
> obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o
> -obj-$(CONFIG_ARCH_OMAP4) += prcm.o cminst44xx.o cm44xx.o
> -obj-$(CONFIG_ARCH_OMAP4) += prcm_mpu44xx.o prminst44xx.o
> -obj-$(CONFIG_ARCH_OMAP4) += vc44xx_data.o vp44xx_data.o prm44xx.o
> +omap-prcm-4-5-common = prcm.o cminst44xx.o cm44xx.o \
> + prcm_mpu44xx.o prminst44xx.o \
> + vc44xx_data.o vp44xx_data.o
> +obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common) prm44xx.o
> +obj-$(CONFIG_ARCH_OMAP5) += $(omap-prcm-4-5-common)
>
> # OMAP voltage domains
> voltagedomain-common := voltage.o vc.o vp.o
> @@ -99,6 +105,7 @@ obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common)
> obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o
> obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common)
> obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o
> +obj-$(CONFIG_ARCH_OMAP5) += $(voltagedomain-common)
>
> # OMAP powerdomain framework
> powerdomain-common += powerdomain.o powerdomain-common.o
> @@ -113,6 +120,7 @@ obj-$(CONFIG_ARCH_OMAP3) += powerdomains2xxx_3xxx_data.o
> obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common)
> obj-$(CONFIG_ARCH_OMAP4) += powerdomain44xx.o
> obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o
> +obj-$(CONFIG_ARCH_OMAP5) += $(powerdomain-common) powerdomain44xx.o
>
> # PRCM clockdomain control
> obj-$(CONFIG_ARCH_OMAP2) += clockdomain.o
> @@ -124,9 +132,11 @@ obj-$(CONFIG_ARCH_OMAP3) += clockdomain.o
> obj-$(CONFIG_ARCH_OMAP3) += clockdomain2xxx_3xxx.o
> obj-$(CONFIG_ARCH_OMAP3) += clockdomains2xxx_3xxx_data.o
> obj-$(CONFIG_ARCH_OMAP3) += clockdomains3xxx_data.o
> -obj-$(CONFIG_ARCH_OMAP4) += clockdomain.o
> -obj-$(CONFIG_ARCH_OMAP4) += clockdomain44xx.o
> +omap-clock-4-5-common = clockdomain.o \
> + clockdomain44xx.o
> +obj-$(CONFIG_ARCH_OMAP4) += $(omap-clock-4-5-common)
> obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o
> +obj-$(CONFIG_ARCH_OMAP5) += $(omap-clock-4-5-common)
>
> # Clock framework
> obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o
> @@ -144,6 +154,8 @@ obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o clock3xxx_data.o
> obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o
> obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o
> obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o
> +obj-$(CONFIG_ARCH_OMAP5) += $(clock-common)
> +obj-$(CONFIG_ARCH_OMAP5) += dpll3xxx.o dpll44xx.o
>
> # OMAP2 clock rate set data (old "OPP" data)
> obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o
> diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
> index d9f4931..c589bb8 100644
> --- a/arch/arm/mach-omap2/clock.c
> +++ b/arch/arm/mach-omap2/clock.c
> @@ -400,7 +400,8 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
>
> /* OMAP3/4 non-CORE DPLL clkops */
>
> -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
> +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) || \
> + defined(CONFIG_ARCH_OMAP5)
>
> const struct clkops clkops_omap3_noncore_dpll_ops = {
> .enable = omap3_noncore_dpll_enable,
> diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h
> index a018a73..da67e08 100644
> --- a/arch/arm/mach-omap2/cminst44xx.h
> +++ b/arch/arm/mach-omap2/cminst44xx.h
> @@ -19,7 +19,7 @@ extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs);
>
> extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs);
>
> -# ifdef CONFIG_ARCH_OMAP4
> +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_OMAP5)
> extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
> u16 clkctrl_offs);
>
> diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
> index 8a6953a..a0e74b9 100644
> --- a/arch/arm/mach-omap2/common.c
> +++ b/arch/arm/mach-omap2/common.c
> @@ -182,3 +182,27 @@ void __init omap4_map_io(void)
> }
> #endif
>
> +#if defined(CONFIG_ARCH_OMAP5)
> +static struct omap_globals omap5_globals = {
> + .class = OMAP54XX_CLASS,
> + .tap = OMAP2_L4_IO_ADDRESS(OMAP543x_SCM_BASE),
> + .ctrl = OMAP2_L4_IO_ADDRESS(OMAP543x_SCM_BASE),
> + .ctrl_pad = OMAP2_L4_IO_ADDRESS(OMAP543x_CTRL_BASE),
> + .prm = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE),
> + .cm = OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE),
> + .cm2 = OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE),
> + .prcm_mpu = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE),
Might not be for this patch but just wondering why some register names
are prefixed with OMAP543x whereas others are OMAP54XX.
e.g. will SCM_BASE be different for a different OMAP5 device?
> +};
> +
> +void __init omap2_set_globals_543x(void)
> +{
> + omap2_set_globals_tap(&omap5_globals);
> + omap2_set_globals_control(&omap5_globals);
> + omap2_set_globals_prcm(&omap5_globals);
> +}
> +
> +void __init omap5_map_io(void)
> +{
> + omap5_map_common_io();
> +}
> +#endif
> diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
> index 0672fc5..797dda7 100644
> --- a/arch/arm/mach-omap2/common.h
> +++ b/arch/arm/mach-omap2/common.h
> @@ -78,6 +78,14 @@ static inline void omap44xx_map_common_io(void)
> }
> #endif
>
> +#ifdef CONFIG_ARCH_OMAP5
> +extern void omap5_map_common_io(void);
> +#else
> +static inline void omap5_map_common_io(void)
> +{
> +}
nit-pick
static inline void omap5_map_common_io(void) {}
> +#endif
> +
> extern void omap2_init_common_infrastructure(void);
>
> extern struct sys_timer omap2_timer;
> @@ -94,6 +102,7 @@ void omap3_init_early(void); /* Do not use this one */
> void am35xx_init_early(void);
> void ti81xx_init_early(void);
> void omap4430_init_early(void);
> +void omap5_init_early(void);
> void omap_prcm_restart(char, const char *);
>
> /*
> @@ -118,6 +127,7 @@ void omap2_set_globals_242x(void);
> void omap2_set_globals_243x(void);
> void omap2_set_globals_3xxx(void);
> void omap2_set_globals_443x(void);
> +void omap2_set_globals_543x(void);
It might be better to use 5xxx in the naming scheme instead of 543x as
it would be used for all OMAP5 devices.
> void omap2_set_globals_ti81xx(void);
> void omap2_set_globals_am33xx(void);
>
> @@ -132,6 +142,7 @@ void omap243x_map_io(void);
> void omap3_map_io(void);
> void am33xx_map_io(void);
> void omap4_map_io(void);
> +void omap5_map_io(void);
> void ti81xx_map_io(void);
> void omap_barriers_init(void);
<snip>
regards,
-roger
More information about the linux-arm-kernel
mailing list