[PATCH] ARM: EXYNOS4: Support Suspend/Resume for EXYNOS4412
Kukjin Kim
kgene.kim at samsung.com
Mon May 14 04:16:22 EDT 2012
Inderpal Singh wrote:
>
> This patch provides the suspend/resume support for EXYNOS4412.
>
> Signed-off-by: Inderpal Singh <inderpal.singh at linaro.org>
> ---
> arch/arm/mach-exynos/include/mach/regs-pmu.h | 10 +++++++++-
> arch/arm/mach-exynos/pm.c | 2 +-
> arch/arm/mach-exynos/pmu.c | 24
++++++++++++++++++++----
> 3 files changed, 30 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-
> exynos/include/mach/regs-pmu.h
> index 4c53f38..606b199 100644
> --- a/arch/arm/mach-exynos/include/mach/regs-pmu.h
> +++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
> @@ -177,7 +177,7 @@
>
> #define S5P_PMU_LCD1_CONF S5P_PMUREG(0x3CA0)
>
> -/* Only for EXYNOS4212 */
> +/* Only for EXYNOS4x12 */
> #define S5P_ISP_ARM_LOWPWR S5P_PMUREG(0x1050)
> #define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR S5P_PMUREG(0x1054)
> #define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR S5P_PMUREG(0x1058)
> @@ -218,4 +218,12 @@
> #define S5P_SECSS_MEM_OPTION S5P_PMUREG(0x2EC8)
> #define S5P_ROTATOR_MEM_OPTION S5P_PMUREG(0x2F48)
>
> +/* Only for EXYNOS4412 */
> +#define S5P_ARM_CORE2_LOWPWR S5P_PMUREG(0x1020)
> +#define S5P_DIS_IRQ_CORE2 S5P_PMUREG(0x1024)
> +#define S5P_DIS_IRQ_CENTRAL2 S5P_PMUREG(0x1028)
> +#define S5P_ARM_CORE3_LOWPWR S5P_PMUREG(0x1030)
> +#define S5P_DIS_IRQ_CORE3 S5P_PMUREG(0x1034)
> +#define S5P_DIS_IRQ_CENTRAL3 S5P_PMUREG(0x1038)
> +
> #endif /* __ASM_ARCH_REGS_PMU_H */
> diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
> index 428cfeb..f0bb467 100644
> --- a/arch/arm/mach-exynos/pm.c
> +++ b/arch/arm/mach-exynos/pm.c
> @@ -313,7 +313,7 @@ static int exynos4_pm_suspend(void)
> tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
> __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
>
> - if (soc_is_exynos4212()) {
> + if (soc_is_exynos4212() || soc_is_exynos4412()) {
> tmp = __raw_readl(S5P_CENTRAL_SEQ_OPTION);
> tmp &= ~(S5P_USE_STANDBYWFI_ISP_ARM |
> S5P_USE_STANDBYWFE_ISP_ARM);
> diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
> index bba48f5..77c6815 100644
> --- a/arch/arm/mach-exynos/pmu.c
> +++ b/arch/arm/mach-exynos/pmu.c
> @@ -94,7 +94,7 @@ static struct exynos4_pmu_conf exynos4210_pmu_config[] =
> {
> { PMU_TABLE_END,},
> };
>
> -static struct exynos4_pmu_conf exynos4212_pmu_config[] = {
> +static struct exynos4_pmu_conf exynos4x12_pmu_config[] = {
> { S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } },
> { S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } },
> { S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } },
> @@ -202,6 +202,16 @@ static struct exynos4_pmu_conf
exynos4212_pmu_config[]
> = {
> { PMU_TABLE_END,},
> };
>
> +static struct exynos4_pmu_conf exynos4412_pmu_config[] = {
> + { S5P_ARM_CORE2_LOWPWR, { 0x0, 0x0, 0x2 } },
> + { S5P_DIS_IRQ_CORE2, { 0x0, 0x0, 0x0 } },
> + { S5P_DIS_IRQ_CENTRAL2, { 0x0, 0x0, 0x0 } },
> + { S5P_ARM_CORE3_LOWPWR, { 0x0, 0x0, 0x2 } },
> + { S5P_DIS_IRQ_CORE3, { 0x0, 0x0, 0x0 } },
> + { S5P_DIS_IRQ_CENTRAL3, { 0x0, 0x0, 0x0 } },
> + { PMU_TABLE_END,},
> +};
> +
> void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
> {
> unsigned int i;
> @@ -209,6 +219,12 @@ void exynos4_sys_powerdown_conf(enum sys_powerdown
> mode)
> for (i = 0; (exynos4_pmu_config[i].reg != PMU_TABLE_END) ; i++)
> __raw_writel(exynos4_pmu_config[i].val[mode],
> exynos4_pmu_config[i].reg);
> +
> + if (soc_is_exynos4412()) {
> + for (i = 0; exynos4412_pmu_config[i].reg != PMU_TABLE_END ;
> i++)
> + __raw_writel(exynos4412_pmu_config[i].val[mode],
> + exynos4412_pmu_config[i].reg);
> + }
> }
>
> static int __init exynos4_pmu_init(void)
> @@ -218,9 +234,9 @@ static int __init exynos4_pmu_init(void)
> if (soc_is_exynos4210()) {
> exynos4_pmu_config = exynos4210_pmu_config;
> pr_info("EXYNOS4210 PMU Initialize\n");
> - } else if (soc_is_exynos4212()) {
> - exynos4_pmu_config = exynos4212_pmu_config;
> - pr_info("EXYNOS4212 PMU Initialize\n");
> + } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
> + exynos4_pmu_config = exynos4x12_pmu_config;
> + pr_info("EXYNOS4x12 PMU Initialize\n");
> } else {
> pr_info("EXYNOS4: PMU not supported\n");
> }
> --
> 1.7.5.4
Looks ok to me, will apply.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
More information about the linux-arm-kernel
mailing list