[PATCH RESEND v3 1/2] input: keyboard: Add keys driver for the LPC32xx SoC
Rob Herring
robherring2 at gmail.com
Thu May 17 19:31:08 EDT 2012
On 05/16/2012 03:25 PM, Roland Stigge wrote:
> This patch adds a driver for the key scan interface of the LPC32xx SoC
>
> Signed-off-by: Roland Stigge <stigge at antcom.de>
For the binding,
Acked-by: Rob Herring <rob.herring at calxeda.con>
>
> ---
> Applies to v3.4-rc7
>
> Please pick this patch for the input subsystem.
>
> Changes since v2:
> * Fixed case of lpc32XX_* -> lpc32xx_*
> * Removed unnecessary casts
> * Removed unnecessary unlikely()
> * Use unsigned for key bits
> * Included Russell's lpc32xx_mod_states() algorithm change suggestion
> * Replaced (res == NULL) with (!res)
> * clk_enable() -> clk_prepare_enable()
> * Moved clk_prepare_enable() and clk_disable_unprepare() to input's
> open()/close() callbacks to save power
> * Handle clk_prepare_enable() return value appropriately
> * DT: Use "keypad,num-rows", "keypad,num-columns" and "linux,keymap" properties
>
> Thanks to Axel Lin and Russell King for reviewing!
>
> Documentation/devicetree/bindings/input/lpc32xx-key.txt | 28 +
> drivers/input/keyboard/Kconfig | 10
> drivers/input/keyboard/Makefile | 1
> drivers/input/keyboard/lpc32xx-keys.c | 382 ++++++++++++++++
> 4 files changed, 421 insertions(+)
>
> --- /dev/null
> +++ linux-2.6/Documentation/devicetree/bindings/input/lpc32xx-key.txt
> @@ -0,0 +1,28 @@
> +NXP LPC32xx Key Scan Interface
> +
> +Required Properties:
> +- compatible: Should be "nxp,lpc3220-key"
> +- reg: Physical base address of the controller and length of memory mapped
> + region.
> +- interrupts: The interrupt number to the cpu.
> +- keypad,num-rows: Number of rows and columns, e.g. 1: 1x1, 6: 6x6
> +- keypad,num-columns: Must be equal to keypad,num-rows since LPC32xx only
> + supports square matrices
> +- nxp,debounce-delay-ms: Debounce delay in ms
> +- nxp,scan-delay-ms: Repeated scan period in ms
> +- linux,keymap: the key-code to be reported when the key is pressed
> + and released, see also
> + Documentation/devicetree/bindings/input/matrix-keymap.txt
> +
> +Example:
> +
> + key at 40050000 {
> + compatible = "nxp,lpc3220-key";
> + reg = <0x40050000 0x1000>;
> + interrupts = <54 0>;
> + keypad,num-rows = <1>;
> + keypad,num-columns = <1>;
> + nxp,debounce-delay-ms = <3>;
> + nxp,scan-delay-ms = <34>;
> + linux,keymap = <0x00000002>;
> + };
> --- linux-2.6.orig/drivers/input/keyboard/Kconfig
> +++ linux-2.6/drivers/input/keyboard/Kconfig
> @@ -318,6 +318,16 @@ config KEYBOARD_LOCOMO
> To compile this driver as a module, choose M here: the
> module will be called locomokbd.
>
> +config KEYBOARD_LPC32XX
> + tristate "LPC32XX matrix key scanner support"
> + depends on ARCH_LPC32XX
> + help
> + Say Y here if you want to use NXP LPC32XX SoC key scanner interface,
> + connected to a key matrix.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called lpc32xx-keys.
> +
> config KEYBOARD_MAPLE
> tristate "Maple bus keyboard"
> depends on SH_DREAMCAST && MAPLE
> --- linux-2.6.orig/drivers/input/keyboard/Makefile
> +++ linux-2.6/drivers/input/keyboard/Makefile
> @@ -25,6 +25,7 @@ obj-$(CONFIG_KEYBOARD_HP7XX) += jornada
> obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o
> obj-$(CONFIG_KEYBOARD_LM8323) += lm8323.o
> obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o
> +obj-$(CONFIG_KEYBOARD_LPC32XX) += lpc32xx-keys.o
> obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o
> obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o
> obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o
> --- /dev/null
> +++ linux-2.6/drivers/input/keyboard/lpc32xx-keys.c
> @@ -0,0 +1,382 @@
> +/*
> + * NXP LPC32xx SoC Key Scan Interface
> + *
> + * Authors:
> + * Kevin Wells <kevin.wells at nxp.com>
> + * Roland Stigge <stigge at antcom.de>
> + *
> + * Copyright (C) 2010 NXP Semiconductors
> + * Copyright (C) 2012 Roland Stigge
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/interrupt.h>
> +#include <linux/slab.h>
> +#include <linux/irq.h>
> +#include <linux/pm.h>
> +#include <linux/platform_device.h>
> +#include <linux/input.h>
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +
> +/*
> + * Key scanner register offsets
> + */
> +#define LPC32XX_KS_DEB(x) ((x) + 0x00)
> +#define LPC32XX_KS_STATE_COND(x) ((x) + 0x04)
> +#define LPC32XX_KS_IRQ(x) ((x) + 0x08)
> +#define LPC32XX_KS_SCAN_CTL(x) ((x) + 0x0C)
> +#define LPC32XX_KS_FAST_TST(x) ((x) + 0x10)
> +#define LPC32XX_KS_MATRIX_DIM(x) ((x) + 0x14)
> +#define LPC32XX_KS_DATA(x, y) ((x) + 0x40 + ((y) << 2))
> +
> +#define LPC32XX_KSCAN_DEB_NUM_DEB_PASS(n) ((n) & 0xFF)
> +
> +#define LPC32XX_KSCAN_SCOND_IN_IDLE 0x0
> +#define LPC32XX_KSCAN_SCOND_IN_SCANONCE 0x1
> +#define LPC32XX_KSCAN_SCOND_IN_IRQGEN 0x2
> +#define LPC32XX_KSCAN_SCOND_IN_SCAN_MATRIX 0x3
> +
> +#define LPC32XX_KSCAN_IRQ_PENDING_CLR 0x1
> +
> +#define LPC32XX_KSCAN_SCTRL_SCAN_DELAY(n) ((n) & 0xFF)
> +
> +#define LPC32XX_KSCAN_FTST_FORCESCANONCE 0x1
> +#define LPC32XX_KSCAN_FTST_USE32K_CLK 0x2
> +
> +#define LPC32XX_KSCAN_MSEL_SELECT(n) ((n) & 0xF)
> +
> +/*
> + * Key scanner platform configuration structure
> + */
> +struct lpc32xx_kscan_cfg {
> + u32 matrix_sz; /* Size of matrix in XxY, ie. 3 = 3x3 */
> + int *keymap; /* Pointer to key map for the scan matrix */
> + u32 deb_clks; /* Debounce clocks (based on 32KHz clock) */
> + u32 scan_delay; /* Scan delay (based on 32KHz clock) */
> +};
> +
> +struct lpc32xx_kscan_drv {
> + struct input_dev *input;
> + struct lpc32xx_kscan_cfg *kscancfg;
> + struct clk *clk;
> + void __iomem *kscan_base;
> + int irq;
> + u8 lastkeystates[8];
> +};
> +
> +static void lpc32xx_mod_states(struct lpc32xx_kscan_drv *kscandat, int off)
> +{
> + u8 key;
> + int j;
> + unsigned changed, scancode, keycode;
> +
> + key = readl(LPC32XX_KS_DATA(kscandat->kscan_base, off));
> + changed = key ^ kscandat->lastkeystates[off];
> + if (changed) {
> + for (j = 0; j < kscandat->kscancfg->matrix_sz; j++) {
> + if (changed & (1 << j)) {
> + /* Key state changed, signal an event */
> + scancode =
> + (j * kscandat->kscancfg->matrix_sz) + off;
> + keycode = kscandat->kscancfg->keymap[scancode];
> + input_report_key(kscandat->input, keycode,
> + key & (1 << j));
> + }
> + }
> +
> + kscandat->lastkeystates[off] = key;
> + }
> +}
> +
> +static irqreturn_t lpc32xx_kscan_irq(int irq, void *dev_id)
> +{
> + int i;
> + struct lpc32xx_kscan_drv *kscandat = dev_id;
> +
> + for (i = 0; i < kscandat->kscancfg->matrix_sz; i++)
> + lpc32xx_mod_states(kscandat, i);
> +
> + writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
> +
> + input_sync(kscandat->input);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int lpc32xx_kscan_open(struct input_dev *dev)
> +{
> + struct lpc32xx_kscan_drv *kscandat = input_get_drvdata(dev);
> +
> + return clk_prepare_enable(kscandat->clk);
> +}
> +
> +static void lpc32xx_kscan_close(struct input_dev *dev)
> +{
> + struct lpc32xx_kscan_drv *kscandat = input_get_drvdata(dev);
> +
> + clk_disable_unprepare(kscandat->clk);
> +}
> +
> +#ifdef CONFIG_OF
> +static struct lpc32xx_kscan_cfg *lpc32xx_parse_dt(struct device *dev)
> +{
> + struct lpc32xx_kscan_cfg *pdata;
> + struct device_node *np = dev->of_node;
> + int key_count;
> + int i;
> + u32 rows, columns;
> + const __be32 *prop;
> + int proplen;
> +
> + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
> + if (!pdata) {
> + dev_err(dev, "could not allocate memory for platform data\n");
> + return NULL;
> + }
> +
> + of_property_read_u32(np, "keypad,num-rows", &rows);
> + of_property_read_u32(np, "keypad,num-columns", &columns);
> + if (!rows || rows != columns) {
> + dev_err(dev, "rows and columns must be specified and be equal!\n");
> + return NULL;
> + }
> +
> + pdata->matrix_sz = rows;
> + key_count = rows * columns;
> +
> + of_property_read_u32(np, "nxp,debounce-delay-ms", &pdata->deb_clks);
> + of_property_read_u32(np, "nxp,scan-delay-ms", &pdata->scan_delay);
> + if (!pdata->deb_clks || !pdata->scan_delay) {
> + dev_err(dev, "debounce or scan delay not specified\n");
> + return NULL;
> + }
> +
> + pdata->keymap = devm_kzalloc(dev, sizeof(int) * key_count, GFP_KERNEL);
> + if (!pdata->keymap) {
> + dev_err(dev, "could not allocate memory for keymap\n");
> + return NULL;
> + }
> +
> + prop = of_get_property(np, "linux,keymap", &proplen);
> + if (!prop) {
> + dev_err(dev, "linux,keymap not specified\n");
> + return NULL;
> + }
> +
> + if (proplen % sizeof(u32)) {
> + dev_err(dev, "bad linux,keymap property size: %d\n", proplen);
> + return NULL;
> + }
> + proplen /= sizeof(u32);
> +
> + for (i = 0; i < proplen; i++) {
> + u32 tmp = be32_to_cpup(prop + i);
> + u32 row, column, key_code;
> +
> + row = (tmp >> 24) & 0xff;
> + column = (tmp >> 16) & 0xff;
> + key_code = tmp & 0xffff;
> + pdata->keymap[row * columns + column] = key_code;
> + }
> +
> + return pdata;
> +}
> +#else
> +static struct lpc32xx_kscan_cfg *lpc32xx_parse_dt(struct device *dev)
> +{
> + return NULL;
> +}
> +#endif
> +
> +static int __devinit lpc32xx_kscan_probe(struct platform_device *pdev)
> +{
> + struct lpc32xx_kscan_drv *kscandat;
> + struct resource *res;
> + int retval, i, keynum;
> +
> + kscandat = kzalloc(sizeof(struct lpc32xx_kscan_drv), GFP_KERNEL);
> + if (!kscandat) {
> + dev_err(&pdev->dev, "failed to allocate memory\n");
> + return -ENOMEM;
> + }
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res) {
> + dev_err(&pdev->dev, "failed to get platform I/O memory\n");
> + retval = -EBUSY;
> + goto out1;
> + }
> +
> + kscandat->kscan_base = devm_request_and_ioremap(&pdev->dev, res);
> + if (kscandat->kscan_base == NULL) {
> + dev_err(&pdev->dev, "failed to request and remap I/O memory\n");
> + retval = -EBUSY;
> + goto out1;
> + }
> +
> + /* Get the key scanner clock */
> + kscandat->clk = clk_get(&pdev->dev, NULL);
> + if (IS_ERR(kscandat->clk)) {
> + dev_err(&pdev->dev, "failed to get clock\n");
> + retval = -ENODEV;
> + goto out1;
> + }
> +
> + kscandat->irq = platform_get_irq(pdev, 0);
> + if ((kscandat->irq < 0) || (kscandat->irq >= NR_IRQS)) {
> + dev_err(&pdev->dev, "failed to get platform irq\n");
> + retval = -EINVAL;
> + goto out2;
> + }
> + retval = request_irq(kscandat->irq, lpc32xx_kscan_irq,
> + 0, pdev->name, kscandat);
> + if (retval) {
> + dev_err(&pdev->dev, "failed to request irq\n");
> + goto out2;
> + }
> +
> + kscandat->input = input_allocate_device();
> + if (kscandat->input == NULL) {
> + dev_err(&pdev->dev, "failed to allocate device\n");
> + retval = -ENOMEM;
> + goto out3;
> + }
> +
> + if (pdev->dev.of_node)
> + kscandat->kscancfg = lpc32xx_parse_dt(&pdev->dev);
> + else
> + kscandat->kscancfg = pdev->dev.platform_data;
> + if (!kscandat->kscancfg) {
> + dev_err(&pdev->dev, "failed to get platform data\n");
> + retval = -EINVAL;
> + goto out4;
> + }
> +
> + platform_set_drvdata(pdev, kscandat);
> +
> + /* Setup key input */
> + kscandat->input->evbit[0] = BIT_MASK(EV_KEY);
> + kscandat->input->name = pdev->name;
> + kscandat->input->phys = "matrix-keys/input0";
> + kscandat->input->dev.parent = &pdev->dev;
> + kscandat->input->id.vendor = 0x0001;
> + kscandat->input->id.product = 0x0001;
> + kscandat->input->id.version = 0x0100;
> + kscandat->input->open = &lpc32xx_kscan_open;
> + kscandat->input->close = &lpc32xx_kscan_close;
> + keynum = kscandat->kscancfg->matrix_sz * kscandat->kscancfg->matrix_sz;
> + for (i = 0; i < keynum; i++)
> + __set_bit(kscandat->kscancfg->keymap[i],
> + kscandat->input->keybit);
> +
> + input_set_drvdata(kscandat->input, kscandat);
> + input_set_capability(kscandat->input, EV_MSC, MSC_SCAN);
> +
> + retval = input_register_device(kscandat->input);
> + if (retval) {
> + dev_err(&pdev->dev, "failed to register input device\n");
> + goto out4;
> + }
> +
> + /* Configure the key scanner */
> + writel(kscandat->kscancfg->deb_clks,
> + LPC32XX_KS_DEB(kscandat->kscan_base));
> + writel(kscandat->kscancfg->scan_delay,
> + LPC32XX_KS_SCAN_CTL(kscandat->kscan_base));
> + writel(LPC32XX_KSCAN_FTST_USE32K_CLK,
> + LPC32XX_KS_FAST_TST(kscandat->kscan_base));
> + writel(kscandat->kscancfg->matrix_sz,
> + LPC32XX_KS_MATRIX_DIM(kscandat->kscan_base));
> + writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
> +
> + return 0;
> +
> +out4:
> + input_free_device(kscandat->input);
> +out3:
> + free_irq(kscandat->irq, pdev);
> +out2:
> + clk_put(kscandat->clk);
> +out1:
> + kfree(kscandat);
> +
> + return retval;
> +}
> +
> +static int __devexit lpc32xx_kscan_remove(struct platform_device *pdev)
> +{
> + struct lpc32xx_kscan_drv *kscandat = platform_get_drvdata(pdev);
> +
> + free_irq(kscandat->irq, pdev);
> + input_unregister_device(kscandat->input);
> + clk_put(kscandat->clk);
> + kfree(kscandat);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +static int lpc32xx_kscan_suspend(struct platform_device *pdev,
> + pm_message_t state)
> +{
> + struct lpc32xx_kscan_drv *kscandat = platform_get_drvdata(pdev);
> +
> + /* Clear IRQ and disable clock */
> + writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
> + clk_disable_unprepare(kscandat->clk);
> +
> + return 0;
> +}
> +
> +static int lpc32xx_kscan_resume(struct platform_device *pdev)
> +{
> + struct lpc32xx_kscan_drv *kscandat = platform_get_drvdata(pdev);
> +
> + /* Enable clock and clear IRQ */
> + clk_prepare_enable(kscandat->clk);
> + writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
> +
> + return 0;
> +}
> +#else
> +#define lpc32xx_kscan_suspend NULL
> +#define lpc32xx_kscan_resume NULL
> +#endif
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id lpc32xx_kscan_match[] = {
> + { .compatible = "nxp,lpc3220-key" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, lpc32xx_kscan_match);
> +#endif
> +
> +static struct platform_driver lpc32xx_kscan_driver = {
> + .probe = lpc32xx_kscan_probe,
> + .remove = __devexit_p(lpc32xx_kscan_remove),
> + .suspend = lpc32xx_kscan_suspend,
> + .resume = lpc32xx_kscan_resume,
> + .driver = {
> + .name = "lpc32xx_keys",
> + .of_match_table = of_match_ptr(lpc32xx_kscan_match),
> + }
> +};
> +
> +module_platform_driver(lpc32xx_kscan_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Kevin Wells <kevin.wells at nxp.com>");
> +MODULE_AUTHOR("Roland Stigge <stigge at antcom.de>");
> +MODULE_DESCRIPTION("Key scanner driver for LPC32XX devices");
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss
More information about the linux-arm-kernel
mailing list