[PATCHv5 7/8] ARM: OMAP4: PM: Add next_logic_state param to power_state

[Tero Kristo]

This will make it easier to handle next logic states for power domains
during suspend. With this patch, the parameter is also programmed to
retention for every powerdomain, thus all powerdomains enter CSWR
state after this patch.

Signed-off-by: Tero Kristo <t-kristo at ti.com>
---
 arch/arm/mach-omap2/pm44xx.c |    4 +++-
 1 files changed, 3 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 31990d5..cc85576 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -26,6 +26,7 @@
 struct power_state {
 	struct powerdomain *pwrdm;
 	u32 next_state;
+	u32 next_logic_state;
 #ifdef CONFIG_SUSPEND
 	u32 saved_state;
 	u32 saved_logic_state;
@@ -51,7 +52,7 @@ static int omap4_pm_suspend(void)
 	/* Set targeted power domain states by suspend */
 	list_for_each_entry(pwrst, &pwrst_list, node) {
 		omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
-		pwrdm_set_logic_retst(pwrst->pwrdm, PWRDM_POWER_OFF);
+		pwrdm_set_logic_retst(pwrst->pwrdm, pwrst->next_logic_state);
 	}
 
 	/*
@@ -108,6 +109,7 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 
 	pwrst->pwrdm = pwrdm;
 	pwrst->next_state = PWRDM_POWER_RET;
+	pwrst->next_logic_state = PWRDM_POWER_RET;
 	list_add(&pwrst->node, &pwrst_list);
 
 	return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
-- 
1.7.4.1