[PATCH v2 00/12] add imx usb driver for mx28/6x

[Dirk Behme]

On 22.05.2012 07:08, Richard Zhao wrote:
> On Mon, May 21, 2012 at 04:34:15PM -0300, Fabio Estevam wrote:
>> Hi Richard,
>>
>> On Mon, May 21, 2012 at 6:23 AM, Richard Zhao
>> <richard.zhao at freescale.com> wrote:
>>> The work is based on  ci13xxx rework done by Alexander Shishkin.
>>>
>>> Status:
>>>  - this version only support host
>>>  - usbotg controler works at host role
>>>
>>> Changes since V1:
>>>  - Merge the work of Marek
>>>  - re-implement connect change notify
>>>  - imx6q: move part of code to clk
>>>  - imx6q: add config-on-boot gpios
>> Can you please also add the driver into the defconfig files?
> Thanks for you reminder.

For i.MX6 I use something like [1].

Best regards

Dirk

[1]

From: Dirk Behme <dirk.behme at de.bosch.com>
Subject: [PATCH] ARM: imx_v6_v7_defconfig: Enable chipidea USB host driver

Signed-off-by: Dirk Behme <dirk.behme at de.bosch.com>
---
  arch/arm/configs/imx_v6_v7_defconfig |    8 ++++++--
  1 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm/configs/imx_v6_v7_defconfig 
b/arch/arm/configs/imx_v6_v7_defconfig
index c3a828e..45001ef 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -130,6 +130,7 @@ CONFIG_GPIO_SYSFS=y
  CONFIG_WATCHDOG=y
  CONFIG_IMX2_WDT=y
  CONFIG_MFD_MC13XXX=y
+CONFIG_MFD_ANATOP=y
  CONFIG_REGULATOR=y
  CONFIG_REGULATOR_FIXED_VOLTAGE=y
  CONFIG_REGULATOR_MC13783=y
@@ -166,9 +167,12 @@ CONFIG_LOGO_LINUX_MONO=y
  CONFIG_LOGO_LINUX_VGA16=y
  CONFIG_LOGO_LINUX_CLUT224=y
  CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_CHIPIDEA_DEBUG=y
  CONFIG_USB_STORAGE=y
+CONFIG_USB_MXS_PHY=y
  CONFIG_MMC=y
  CONFIG_MMC_SDHCI=y
  CONFIG_MMC_SDHCI_PLTFM=y