[PATCH v2 00/12] add imx usb driver for mx28/6x

[Chen Peter-B29397]

> > >
> > >> Hi Richard,
> > >>
> > >> On Mon, May 21, 2012 at 6:23 AM, Richard Zhao
> > >>
> > >> <richard.zhao at freescale.com>  wrote:
> > >>> The work is based on  ci13xxx rework done by Alexander Shishkin.
> > >>>
> > >>> Status:
> > >>>   - this version only support host
> > >>>   - usbotg controler works at host role
> > >>>
> > >>> Changes since V1:
> > >>>   - Merge the work of Marek
> > >>>   - re-implement connect change notify
> > >>>   - imx6q: move part of code to clk
> > >>>   - imx6q: add config-on-boot gpios
> > >>
> > >> Can you please also add the driver into the defconfig files?
> > >>
> > >> What about the existing USB host drivers for
> mx27/mx31/mx35/mx25/mx35?
> > >>
> > >> Is the idea to switch to drivers/usb/chipidea/host.c too?
> > >
> > > I think the core is the same, it's just the ci13xxx-imx driver that'd
> > > need to be written differently for these
> >
> > So that means driver that you did are not going to be up streamed for
> > mx28/mxs? And those interested should be tracking this patch set?
> 
> This here is definitelly going to support mx28 and I'm slowly working
> through
> the DT stuff to test this, all right?
> 
> We were talking about imx.{xz|x,y is [0-9a-z]} \ imx.{23,28,6q}
>
This driver needs to work on both DT and non-DT support.
Let's do it after next version when we need to add it for old mxc platform.

 
> >
> > -Subodh
> 
> Best regards,
> Marek Vasut