[PATCHv6 11/14] TEMP: ARM: OMAP3: beagle rev-c4: enable OPP6

[Tero Kristo]

Beagleboard rev-c4 has a speed sorted OMAP3530 chip which can run at 720MHz.

Signed-off-by: Tero Kristo <t-kristo at ti.com>
---
 arch/arm/mach-omap2/board-omap3beagle.c |   29 +++++++++++++++++++++++++++++
 arch/arm/mach-omap2/opp3xxx_data.c      |    4 ++++
 2 files changed, 33 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 79c6909..09aa4b1 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -461,6 +461,35 @@ static void __init beagle_opp_init(void)
 		return;
 	}
 
+	if (omap3_beagle_version == OMAP3BEAGLE_BOARD_C4) {
+		struct device *mpu_dev, *iva_dev;
+
+		mpu_dev = omap_device_get_by_hwmod_name("mpu");
+		iva_dev = omap_device_get_by_hwmod_name("iva");
+
+		if (!mpu_dev || !iva_dev) {
+			pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
+				__func__, mpu_dev, iva_dev);
+			return;
+		}
+		/* Enable MPU 720MHz opp */
+		r = opp_enable(mpu_dev, 720000000);
+
+		/* Enable IVA 520MHz opp */
+		r |= opp_enable(iva_dev, 520000000);
+
+		if (r) {
+			pr_err("%s: failed to enable higher opp %d\n",
+				__func__, r);
+			/*
+			 * Cleanup - disable the higher freqs - we dont care
+			 * about the results
+			 */
+			opp_disable(mpu_dev, 720000000);
+			opp_disable(iva_dev, 520000000);
+		}
+	}
+
 	/* Custom OPP enabled for all xM versions */
 	if (cpu_is_omap3630()) {
 		struct device *mpu_dev, *iva_dev;
diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c
index d95f3f9..a0f5fe1 100644
--- a/arch/arm/mach-omap2/opp3xxx_data.c
+++ b/arch/arm/mach-omap2/opp3xxx_data.c
@@ -98,6 +98,8 @@ static struct omap_opp_def __initdata omap34xx_opp_def_list[] = {
 	OPP_INITIALIZER("mpu", true, 550000000, OMAP3430_VDD_MPU_OPP4_UV),
 	/* MPU OPP5 */
 	OPP_INITIALIZER("mpu", true, 600000000, OMAP3430_VDD_MPU_OPP5_UV),
+	/* MPU OPP6 : omap3530 high speed grade only */
+	OPP_INITIALIZER("mpu", false, 720000000, OMAP3430_VDD_MPU_OPP5_UV),
 
 	/*
 	 * L3 OPP1 - 41.5 MHz is disabled because: The voltage for that OPP is
@@ -123,6 +125,8 @@ static struct omap_opp_def __initdata omap34xx_opp_def_list[] = {
 	OPP_INITIALIZER("iva", true, 400000000, OMAP3430_VDD_MPU_OPP4_UV),
 	/* DSP OPP5 */
 	OPP_INITIALIZER("iva", true, 430000000, OMAP3430_VDD_MPU_OPP5_UV),
+	/* DSP OPP6 : omap3530 high speed grade only */
+	OPP_INITIALIZER("iva", false, 520000000, OMAP3430_VDD_MPU_OPP5_UV),
 };
 
 static struct omap_opp_def __initdata omap36xx_opp_def_list[] = {
-- 
1.7.4.1