[PATCH 7/9] ARM: AT91: Add ADC driver to the at91sam9g45 dtsi
Maxime Ripard
maxime.ripard at free-electrons.com
Wed May 9 09:02:06 EDT 2012
Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>
---
arch/arm/boot/dts/at91sam9g45.dtsi | 37 ++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index c804214..7dbccaf 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -199,6 +199,43 @@
interrupts = <25 4>;
status = "disabled";
};
+
+ adc0: adc at fffb0000 {
+ compatible = "atmel,at91sam9260-adc";
+ reg = <0xfffb0000 0x100>;
+ interrupts = <20 4>;
+ atmel,adc-use-external-triggers;
+ atmel,adc-channels-used = <0xff>;
+ atmel,adc-vref = <3300>;
+ atmel,adc-num-channels = <8>;
+ atmel,adc-startup-time = <40>;
+ atmel,adc-channel-base = <0x30>;
+ atmel,adc-drdy-mask = <0x10000>;
+ atmel,adc-status-register = <0x1c>;
+ atmel,adc-trigger-register = <0x08>;
+
+ trigger at 0 {
+ trigger-name = "external-rising";
+ trigger-value = <0x1>;
+ trigger-external;
+ };
+ trigger at 1 {
+ trigger-name = "external-falling";
+ trigger-value = <0x2>;
+ trigger-external;
+ };
+
+ trigger at 2 {
+ trigger-name = "external-any";
+ trigger-value = <0x3>;
+ trigger-external;
+ };
+
+ trigger at 3 {
+ trigger-name = "continuous";
+ trigger-value = <0x6>;
+ };
+ };
};
nand0: nand at 40000000 {
--
1.7.9.5
More information about the linux-arm-kernel
mailing list