[PATCH] USB: ohci-at91: add a reset function to fix race condition

[Nicolas Ferre]

A possible race condition appears because we are not initializing
the ohci->regs before calling usb_hcd_request_irqs().
We move the call to ohci_init() in hcd->driver->reset() instead of
hcd->driver->start() to fix this.
This was experienced when we share the same IRQ line between OHCI and EHCI
controllers.

Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
Tested-by: Christian Eggers <christian.eggers at kathrein.de>
Cc: stable <stable at vger.kernel.org>
---
 drivers/usb/host/ohci-at91.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 13ebeca..55d3d64 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -223,7 +223,7 @@ static void __devexit usb_hcd_at91_remove(struct usb_hcd *hcd,
 /*-------------------------------------------------------------------------*/
 
 static int __devinit
-ohci_at91_start (struct usb_hcd *hcd)
+ohci_at91_reset (struct usb_hcd *hcd)
 {
 	struct at91_usbh_data	*board = hcd->self.controller->platform_data;
 	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
@@ -233,6 +233,14 @@ ohci_at91_start (struct usb_hcd *hcd)
 		return ret;
 
 	ohci->num_ports = board->ports;
+	return 0;
+}
+
+static int __devinit
+ohci_at91_start (struct usb_hcd *hcd)
+{
+	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
+	int			ret;
 
 	if ((ret = ohci_run(ohci)) < 0) {
 		err("can't start %s", hcd->self.bus_name);
@@ -418,6 +426,7 @@ static const struct hc_driver ohci_at91_hc_driver = {
 	/*
 	 * basic lifecycle operations
 	 */
+	.reset =		ohci_at91_reset,
 	.start =		ohci_at91_start,
 	.stop =			ohci_stop,
 	.shutdown =		ohci_shutdown,
-- 
1.7.10