[PATCH 2/2] arm: omap3: am35x: Disable hlt when using Davinci EMAC
Igor Grinberg
grinberg at compulab.co.il
Mon May 14 04:20:58 EDT 2012
Hi Mark,
Thanks for the great work!
On 05/12/12 00:12, Mark A. Greer wrote:
> From: "Mark A. Greer" <mgreer at animalcreek.com>
>
> The am35x family of SoCs has a Davinci EMAC ethernet
> controller on-chip. Unfortunately, the EMAC is unable
> to wake the PRCM when there is network activity which
> leads to a hung or extremely slow system when the MPU
> has executed a 'wfi' instruction (because of pm_idle
> or CPUidle). To prevent this, add hooks to the EMAC
> pm_runtime suspend/resume calls so that hlt is disabled
> whenever the EMAC is in use.
>
> Signed-off-by: Mark A. Greer <mgreer at animalcreek.com>
> ---
> arch/arm/mach-omap2/am35xx-emac.c | 44 +++++++++++++++++++++++++++++----
> arch/arm/mach-omap2/am35xx-emac.h | 16 +++++++++---
> arch/arm/mach-omap2/board-am3517evm.c | 3 ++-
> arch/arm/mach-omap2/board-cm-t3517.c | 3 ++-
> 4 files changed, 56 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c
> index 3bb5cb3..22ff968 100644
> --- a/arch/arm/mach-omap2/am35xx-emac.c
> +++ b/arch/arm/mach-omap2/am35xx-emac.c
> @@ -23,6 +23,37 @@
> #include "control.h"
> #include "am35xx-emac.h"
>
> +/*
> + * Default pm_lats for the am35x.
> + * The net effect of using am35xx_emac_pm_lats[] is that
> + * pm_idle or CPUidle won't be called while the emac
> + * interface is open. This is required because the
> + * EMAC can't wake up PRCM so if the MPU is executing
> + * a 'wfi' instruction (e.g., from pm_idle or CPUidle),
> + * it won't break out of it due to emac activity.
> + */
> +static int am35xx_emac_deactivate_func(struct omap_device *od)
> +{
> + enable_hlt();
> + return omap_device_idle_hwmods(od);
> +}
> +
> +static int am35xx_emac_activate_func(struct omap_device *od)
> +{
> + disable_hlt();
> + return omap_device_enable_hwmods(od);
> +}
> +
> +struct omap_device_pm_latency am35xx_emac_pm_lats[] = {
> + {
> + .deactivate_func = am35xx_emac_deactivate_func,
> + .activate_func = am35xx_emac_activate_func,
> + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
> + },
> +};
> +
> +int am35xx_emac_pm_lats_size = ARRAY_SIZE(am35xx_emac_pm_lats);
> +
> static void am35xx_enable_emac_int(void)
> {
> u32 regval;
> @@ -61,12 +92,13 @@ static struct emac_platform_data am35xx_emac_pdata = {
> static struct mdio_platform_data am35xx_mdio_pdata;
>
> static int __init omap_davinci_emac_dev_init(struct omap_hwmod *oh,
> - void *pdata, int pdata_len)
> + void *pdata, int pdata_len,
> + struct omap_device_pm_latency *pm_lats, int pm_lats_size)
> {
> struct platform_device *pdev;
>
> pdev = omap_device_build(oh->class->name, 0, oh, pdata, pdata_len,
> - NULL, 0, false);
> + pm_lats, pm_lats_size, false);
> if (IS_ERR(pdev)) {
> WARN(1, "Can't build omap_device for %s:%s.\n",
> oh->class->name, oh->name);
> @@ -76,7 +108,8 @@ static int __init omap_davinci_emac_dev_init(struct omap_hwmod *oh,
> return 0;
> }
>
> -void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en)
> +void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en,
> + struct omap_device_pm_latency *pm_lats, int pm_lats_size)
> {
> struct omap_hwmod *oh;
> u32 regval;
> @@ -91,7 +124,7 @@ void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en)
> am35xx_mdio_pdata.bus_freq = mdio_bus_freq;
>
> ret = omap_davinci_emac_dev_init(oh, &am35xx_mdio_pdata,
> - sizeof(am35xx_mdio_pdata));
> + sizeof(am35xx_mdio_pdata), NULL, 0);
> if (ret) {
> pr_err("Could not build davinci_mdio hwmod device\n");
> return;
> @@ -106,7 +139,8 @@ void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en)
> am35xx_emac_pdata.rmii_en = rmii_en;
>
> ret = omap_davinci_emac_dev_init(oh, &am35xx_emac_pdata,
> - sizeof(am35xx_emac_pdata));
> + sizeof(am35xx_emac_pdata),
> + pm_lats, pm_lats_size);
> if (ret) {
> pr_err("Could not build davinci_emac hwmod device\n");
> return;
> diff --git a/arch/arm/mach-omap2/am35xx-emac.h b/arch/arm/mach-omap2/am35xx-emac.h
> index 15c6f9c..7c23808 100644
> --- a/arch/arm/mach-omap2/am35xx-emac.h
> +++ b/arch/arm/mach-omap2/am35xx-emac.h
> @@ -6,10 +6,20 @@
> * published by the Free Software Foundation.
> */
>
> +#include <plat/omap_device.h>
> +
> #define AM35XX_DEFAULT_MDIO_FREQUENCY 1000000
>
> -#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE)
> -void am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en);
> +#if IS_ENABLED(CONFIG_TI_DAVINCI_EMAC)
> +extern struct omap_device_pm_latency am35xx_emac_pm_lats[];
> +extern int am35xx_emac_pm_lats_size;
> +
> +void am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en,
> + struct omap_device_pm_latency *pm_lats, int pm_lats_size);
> #else
> -static inline void am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en) {}
> +#define am35xx_emac_pm_lats NULL
> +#define am35xx_emac_pm_lats_size 0
> +
> +static inline void am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en,
> + struct omap_device_pm_latency *pm_lats, int pm_lats_size) {}
> #endif
> diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
> index 3645285..fe3a304 100644
> --- a/arch/arm/mach-omap2/board-am3517evm.c
> +++ b/arch/arm/mach-omap2/board-am3517evm.c
> @@ -385,7 +385,8 @@ static void __init am3517_evm_init(void)
> i2c_register_board_info(1, am3517evm_i2c1_boardinfo,
> ARRAY_SIZE(am3517evm_i2c1_boardinfo));
> /*Ethernet*/
> - am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
> + am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1,
> + am35xx_emac_pm_lats, am35xx_emac_pm_lats_size);
Why is it essential for board file to pass these pm structures?
Is it something board specific?
Can't you just use them inside the am35xx-emac.c file?
>
> /* MUSB */
> am3517_evm_musb_init();
> diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
> index 9e66e16..0a3dc7a 100644
> --- a/arch/arm/mach-omap2/board-cm-t3517.c
> +++ b/arch/arm/mach-omap2/board-cm-t3517.c
> @@ -292,7 +292,8 @@ static void __init cm_t3517_init(void)
> cm_t3517_init_rtc();
> cm_t3517_init_usbh();
> cm_t3517_init_hecc();
> - am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
> + am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1,
> + am35xx_emac_pm_lats, am35xx_emac_pm_lats_size);
> }
>
> MACHINE_START(CM_T3517, "Compulab CM-T3517")
--
Regards,
Igor.
More information about the linux-arm-kernel
mailing list