[PATCH 1/1] mx3fb: support pan display with fb_set_var

Liu Ying-B17645 B17645 at freescale.com
Wed May 30 21:54:52 EDT 2012


Add i.mx SoC maintainer Sacha and ARM maillist, and update Guennadi's email address.

Liu Ying
-----Original Message-----
From: Liu Ying-B17645 
Sent: Wednesday, May 30, 2012 12:27 PM
To: FlorianSchandinat at gmx.de
Cc: lg at denx.de; linux-fbdev at vger.kernel.org; linux-kernel at vger.kernel.org; Liu Ying-B17645
Subject: [PATCH 1/1] mx3fb: support pan display with fb_set_var

Users may call FBIOPUT_VSCREENINFO ioctrl to do pan display.
This ioctrl relies on fb_set_var() to do the job. fb_set_var() calls custom fb_set_par() method and then calls custom
fb_pan_display() method. The current implementation of mx3fb reinitializes IPU display controller every time the custom
fb_set_par() method is called, which makes the display flash if fb_set_var() is called to do panning frequently. The custom
fb_pan_display() method checks if the current xoffset and yoffset are different from previous ones before doing actual panning, which prevents the panning from happening within the
fb_set_var() context. This patch checks new var info to decide whether we really need to reinitialize IPU display controller.
We ignore xoffset and yoffset update because it doesn't require to reinitialize the controller. Users may specify activate field of var info with FB_ACTIVATE_NOW and FB_ACTIVATE_FORCE to reinialize the controller by force. Meanwhile, this patch removes the check in custom fb_pan_display() method mentioned before to have the panning work within fb_set_var() context. It doesn't hurt to do panning again if there is no update for xoffset and yoffset.

Signed-off-by: Liu Ying <Ying.Liu at freescale.com>
---
 drivers/video/mx3fb.c |   31 +++++++++++++++++++++++++++----
 1 files changed, 27 insertions(+), 4 deletions(-)

diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c index e3406ab..238b9aa 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -269,6 +269,8 @@ struct mx3fb_info {
 	struct scatterlist		sg[2];
 
 	u32				sync;	/* preserve var->sync flags */
+
+	struct fb_var_screeninfo	cur_var; /* current var info */
 };
 
 static void mx3fb_dma_done(void *);
@@ -721,6 +723,26 @@ static void mx3fb_dma_done(void *arg)
 	complete(&mx3_fbi->flip_cmpl);
 }
 
+static bool mx3fb_need_not_to_set_par(struct fb_info *fbi) {
+	struct mx3fb_info *mx3_fbi = fbi->par;
+	struct fb_var_screeninfo old_var = mx3_fbi->cur_var;
+	struct fb_var_screeninfo new_var = fbi->var;
+
+	if ((fbi->var.activate & FB_ACTIVATE_FORCE) &&
+	    (fbi->var.activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW)
+		return false;
+
+	/*
+	 * Ignore xoffset and yoffset update,
+	 * because pan display handles this case.
+	 */
+	old_var.xoffset = new_var.xoffset;
+	old_var.yoffset = new_var.yoffset;
+
+	return !memcmp(&old_var, &new_var, sizeof(struct fb_var_screeninfo)); 
+}
+
 static int __set_par(struct fb_info *fbi, bool lock)  {
 	u32 mem_len;
@@ -732,6 +754,9 @@ static int __set_par(struct fb_info *fbi, bool lock)
 	struct idmac_video_param *video = &ichan->params.video;
 	struct scatterlist *sg = mx3_fbi->sg;
 
+	if (mx3fb_need_not_to_set_par(fbi))
+		return 0;
+
 	/* Total cleanup */
 	if (mx3_fbi->txd)
 		sdc_disable_channel(mx3_fbi);
@@ -808,6 +833,8 @@ static int __set_par(struct fb_info *fbi, bool lock)
 	if (mx3_fbi->blank == FB_BLANK_UNBLANK)
 		sdc_enable_channel(mx3_fbi);
 
+	mx3_fbi->cur_var = fbi->var;
+
 	return 0;
 }
 
@@ -1068,10 +1095,6 @@ static int mx3fb_pan_display(struct fb_var_screeninfo *var,
 		return -EINVAL;
 	}
 
-	if (fbi->var.xoffset == var->xoffset &&
-	    fbi->var.yoffset == var->yoffset)
-		return 0;	/* No change, do nothing */
-
 	y_bottom = var->yoffset;
 
 	if (!(var->vmode & FB_VMODE_YWRAP))
--
1.7.1





More information about the linux-arm-kernel mailing list