[PATCH RESEND 2/4] ARM: EXYNOS: Add s3c-hsotg device support for GONI board

[Lukasz Majewski]

This patch adds hsotg device to the GONI board.

Signed-off-by: Lukasz Majewski <l.majewski at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
---
 arch/arm/mach-s5pv210/Kconfig     |    1 +
 arch/arm/mach-s5pv210/mach-goni.c |    5 +++++
 2 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 29594fc..88e983b 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -85,6 +85,7 @@ config MACH_AQUILA
 	select S5P_DEV_ONENAND
 	select S5PV210_SETUP_FB_24BPP
 	select S5PV210_SETUP_SDHCI
+	select S5PV210_SETUP_USB_PHY
 	help
 	  Machine support for the Samsung Aquila target based on S5PC110 SoC
 
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 3239566..5fac4e4 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -278,6 +278,9 @@ static void __init goni_tsp_init(void)
 	i2c2_devs[0].irq = gpio_to_irq(gpio);
 }
 
+/* USB OTG */
+static struct s3c_hsotg_plat goni_hsotg_pdata;
+
 static void goni_camera_init(void)
 {
 	s5pv210_fimc_setup_gpio(S5P_CAMPORT_A);
@@ -941,6 +944,8 @@ static void __init goni_machine_init(void)
 	s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata),
 			 &s5p_device_fimc_md);
 
+	s3c_hsotg_set_platdata(&goni_hsotg_pdata);
+
 	goni_camera_init();
 
 	/* SPI */
-- 
1.7.2.3