[RESEND PATCH 1/2] ARM: OMAP2+: nand: Make board_onenand_init() visible to board code

[Kevin Hilman]

Tony Lindgren <tony at atomide.com> writes:

> * Javier Martinez Canillas <javier at dowhile0.org> [120427 02:33]:
>> On Wed, Apr 25, 2012 at 9:59 AM, Enric Balletbò i Serra
>> <eballetbo at gmail.com> wrote:
>> >
>> > Tony, as this is a fix ,may be included ?
>> >
>> > Acked-by: Enric Balletbo i Serra <eballetbo at gmail.com>
>> > Tested-by: Enric Balletbo i Serra <eballetbo at gmail.com>
>> >
>> > Cheers,
>> >    Enric
>> 
>> Hi Tony, Russel:
>> 
>> This patch is a requirement for patch:
>> 
>> [RESEND PATCH 2/2] OMAP3: igep0020: Add support for Micron NAND Flash
>> storage memory
>> 
>> which is really important since newer IGEPv2 boards have changed their
>> flash memory from OneNAND to NAND.
>> 
>> This patch-set is necessary to make the board work, otherwise it
>> doesn't even boot.
>> 
>> Could we please include these patches?
>
> Thanks for the patience, applying now into board branch finally.

This patch breaks the build for platforms that don't use ONENAND.
Using omap2plus_defconfig, set CONFIG_MTD_ONENAND_OMAP2=n and you'll get
the build error below[1]

By removing the static, there is now duplicate definitions in the .c and
.h files.

The solution is to remove the dummy definition from the .c file.  

Tony, feel free to fold the diff below[2] into the original patch to fix
this compile problem.

Kevin


[1]
/work/kernel/omap/dev/arch/arm/mach-omap2/board-flash.c:102:111: error: redefinition of 'board_onenand_init'
/work/kernel/omap/dev/arch/arm/mach-omap2/board-flash.h:56:51: note: previous definition of 'board_onenand_init' was here
make[2]: *** [arch/arm/mach-omap2/board-flash.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [arch/arm/mach-omap2] Error 2
make: *** [sub-make] Error 2

[2]
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index 70a81f9..53c39d2 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -97,11 +97,6 @@ __init board_onenand_init(struct mtd_partition *onenand_parts,
 
 	gpmc_onenand_init(&board_onenand_data);
 }
-#else
-void
-__init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
-{
-}
 #endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
 
 #if defined(CONFIG_MTD_NAND_OMAP2) || \