[PATCH v2] arm: msm: fix up very basic HTC Sapphire support
Olof Johansson
olof at lixom.net
Sat May 12 01:45:52 EDT 2012
Hi,
Sorry, I should have found the below items on the first review and not
now on the second one, but see below.
On Fri, May 11, 2012 at 5:15 PM, David Brown <davidb at codeaurora.org> wrote:
> From: Daniel Walker <dwalker at fifo99.com>
>
> Adds sapphire into the make file, and fixes all the code problems that
> prevented it from building (including adding board-sapphire.h)
>
> [davidb at codeaurora.org: Move MACH_TROUT selection back under
> ARCH_MSM7X00A]
>
> Signed-off-by: Daniel Walker <dwalker at fifo99.com>
> Signed-off-by: David Brown <davidb at codeaurora.org>
> ---
> v2 - Moved MACH_TROUT selection back under the ARCH config target
>
> arch/arm/mach-msm/Kconfig | 9 +-
> arch/arm/mach-msm/Makefile | 1 +
> arch/arm/mach-msm/board-sapphire.c | 18 +--
> arch/arm/mach-msm/board-sapphire.h | 224 ++++++++++++++++++++++++++++++++++++
> 4 files changed, 234 insertions(+), 18 deletions(-)
> create mode 100644 arch/arm/mach-msm/board-sapphire.h
>
> diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
> index 1cd40ad..70eae63 100644
> --- a/arch/arm/mach-msm/Kconfig
> +++ b/arch/arm/mach-msm/Kconfig
> @@ -6,7 +6,7 @@ choice
>
> config ARCH_MSM7X00A
> bool "MSM7x00A / MSM7x01A"
> - select MACH_TROUT if !MACH_HALIBUT
> + select MACH_TROUT if (!MACH_HALIBUT && !MACH_SAPPHIRE)
Better, thanks!
> diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
> index 4ad3969..aff4e5c 100644
> --- a/arch/arm/mach-msm/Makefile
> +++ b/arch/arm/mach-msm/Makefile
> @@ -20,6 +20,7 @@ CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
> obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
> obj-$(CONFIG_SMP) += headsmp.o platsmp.o
>
> +obj-$(CONFIG_MACH_SAPPHIRE) += board-sapphire.o devices-msm7x00.o
> obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
> obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o
> obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
Unrelated to this change per se, but it seems like devices-msm7x00.o
should be on an obj-$(CONFIG_ARCH_MSM7X00A) statement instead of
duplicated for all boards.
Also, the trout line is mostly duplicated, only delta is panel. Looks
broken. Both of these things is material for a separate patch though.
> diff --git a/arch/arm/mach-msm/board-sapphire.h b/arch/arm/mach-msm/board-sapphire.h
> new file mode 100644
> index 0000000..70f925e
> --- /dev/null
> +++ b/arch/arm/mach-msm/board-sapphire.h
> @@ -0,0 +1,224 @@
[..]
> +void config_sapphire_camera_on_gpios(void);
> +void config_sapphire_camera_off_gpios(void);
> +int sapphire_get_smi_size(void);
> +unsigned int sapphire_get_hwid(void);
> +unsigned int sapphire_get_skuid(void);
> +unsigned int is_12pin_camera(void);
> +int sapphire_is_5M_camera(void);
> +int sapphire_gpio_write(struct gpio_chip *chip, unsigned n, unsigned on);
Many (all?) of these functions are not to be found in the code. Please
don't add prototypes for code that isn't there.
-Olof
More information about the linux-arm-kernel
mailing list