[PATCH 1/2] ARM: S3C64XX: Initial hookup for Bells module on Cragganmore

[Kukjin Kim]

Mark Brown wrote:
> 
> The Bells module now has a number assigned to it. Also hook up the WM9081
> which is soldered down onto the board.
> 
> Signed-off-by: Mark Brown <broonie at opensource.wolfsonmicro.com>
> ---
>  arch/arm/mach-s3c64xx/mach-crag6410-module.c |    9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-
> module.c
> index 0c9b0cb..dbd5771 100644
> --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
> +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
> @@ -192,6 +192,11 @@ static const struct i2c_board_info wm1277_devs[] = {
>  	},
>  };
> 
> +static const struct i2c_board_info wm6230_i2c_devs[] = {
> +	{ I2C_BOARD_INFO("wm9081", 0x6c),
> +	  .platform_data = &wm9081_pdata, },
> +};
> +
>  static __devinitdata const struct {
>  	u8 id;
>  	const char *name;
> @@ -205,7 +210,9 @@ static __devinitdata const struct {
>  	{ .id = 0x03, .name = "1252-EV1 Glenlivet" },
>  	{ .id = 0x11, .name = "6249-EV2 Glenfarclas", },
>  	{ .id = 0x14, .name = "6271-EV1 Lochnagar" },
> -	{ .id = 0x15, .name = "XXXX-EV1 Bells" },
> +	{ .id = 0x15, .name = "6320-EV1 Bells",
> +	  .i2c_devs = wm6230_i2c_devs,
> +	  .num_i2c_devs = ARRAY_SIZE(wm6230_i2c_devs) },
>  	{ .id = 0x21, .name = "1275-EV1 Mortlach" },
>  	{ .id = 0x25, .name = "1274-EV1 Glencadam" },
>  	{ .id = 0x31, .name = "1253-EV1 Tomatin",
> --
> 1.7.10

OK, will apply.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.