[PATCH 1/2] serial/8250: Add LPC3220 standard UART type
Roland Stigge
stigge at antcom.de
Tue May 29 05:09:29 EDT 2012
LPC32xx has "Standard" UARTs that are actually 16550A compatible but have
bigger FIFOs. Since the already supported 16X50 line still doesn't match here,
we agreed on adding a new type.
Signed-off-by: Roland Stigge <stigge at antcom.de>
---
Applies to v3.4
drivers/tty/serial/8250/8250.c | 8 ++++++++
include/linux/serial_core.h | 3 ++-
2 files changed, 10 insertions(+), 1 deletion(-)
--- linux-2.6.orig/drivers/tty/serial/8250/8250.c
+++ linux-2.6/drivers/tty/serial/8250/8250.c
@@ -282,6 +282,14 @@ static const struct serial8250_config ua
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
.flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR,
},
+ [PORT_LPC3220] = {
+ .name = "LPC3220",
+ .fifo_size = 64,
+ .tx_loadsz = 32,
+ .fcr = UART_FCR_DMA_SELECT | UART_FCR_ENABLE_FIFO |
+ UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_00,
+ .flags = UART_CAP_FIFO,
+ },
};
#if defined(CONFIG_MIPS_ALCHEMY)
--- linux-2.6.orig/include/linux/serial_core.h
+++ linux-2.6/include/linux/serial_core.h
@@ -47,7 +47,8 @@
#define PORT_U6_16550A 19 /* ST-Ericsson U6xxx internal UART */
#define PORT_TEGRA 20 /* NVIDIA Tegra internal UART */
#define PORT_XR17D15X 21 /* Exar XR17D15x UART */
-#define PORT_MAX_8250 21 /* max port ID */
+#define PORT_LPC3220 22 /* NXP LPC32xx SoC "Standard" UART */
+#define PORT_MAX_8250 22 /* max port ID */
/*
* ARM specific type numbers. These are not currently guaranteed
More information about the linux-arm-kernel
mailing list