[PATCH 0/9] Enable pinctrl support for mach-mxs

[Shawn Guo]

With pinctrl-mxs driver (DT only) applied on pinctrl tree, the mxs
device tree conversion can start basing on that support.  This series
adopts pinctrl support for mxs device drivers with a dummy pinctrl
state provided for non-DT boot, so that the pinctrl call in the device
drivers will be bypassed for non-DT probe while it starts working for
DT probe.

To ease the merge process, I would like to ask Arnd and Olof to pull
pinctrl tree as a dependency in arm-soc and have this series go through
arm-soc.

Regards,
Shawn

Shawn Guo (9):
  ARM: mxs: enable pinctrl dummy states
  serial: amba-pl011: adopt pinctrl support
  serial: mxs-auart: adopt pinctrl support
  mmc: mxs-mmc: adopt pinctrl support
  mtd: nand: gpmi: adopt pinctrl support
  i2c: mxs: adopt pinctrl support
  ASoC: mxs-saif: adopt pinctrl support
  video: mxsfb: adopt pinctrl support
  ARM: mxs: enable pinctrl support

 arch/arm/Kconfig                        |    1 +
 arch/arm/mach-mxs/Kconfig               |    2 ++
 arch/arm/mach-mxs/include/mach/common.h |    2 ++
 arch/arm/mach-mxs/mach-apx4devkit.c     |    2 ++
 arch/arm/mach-mxs/mach-m28evk.c         |    2 ++
 arch/arm/mach-mxs/mach-mx23evk.c        |    2 ++
 arch/arm/mach-mxs/mach-mx28evk.c        |    2 ++
 arch/arm/mach-mxs/mach-stmp378x_devb.c  |    2 ++
 arch/arm/mach-mxs/mach-tx28.c           |    2 ++
 arch/arm/mach-mxs/mm.c                  |   11 +++++++++++
 drivers/i2c/busses/i2c-mxs.c            |    6 ++++++
 drivers/mmc/host/mxs-mmc.c              |    8 ++++++++
 drivers/mtd/nand/gpmi-nand/gpmi-nand.c  |    9 +++++++++
 drivers/tty/serial/amba-pl011.c         |    8 ++++++++
 drivers/tty/serial/mxs-auart.c          |    8 ++++++++
 drivers/video/mxsfb.c                   |    9 +++++++++
 sound/soc/mxs/mxs-saif.c                |    8 ++++++++
 17 files changed, 84 insertions(+), 0 deletions(-)

-- 
1.7.5.4