[PATCH v3 2/2] regulator: Add support for MAX77686.

jonghwa3.lee at samsung.com jonghwa3.lee at samsung.com
Wed May 23 01:33:28 EDT 2012


On 2012년 05월 23일 14:23, Yadwinder Singh Brar wrote:

> On Wed, May 23, 2012 at 10:10 AM,  <jonghwa3.lee at samsung.com> wrote:
>> On 2012년 05월 23일 13:16, Yadwinder Singh Brar wrote:
>>
>>>>> +     max77686_update_reg(i2c, MAX77686_REG_BUCK2CTRL1,
>>>>> +             max77686->ramp_delay << 6, RAMP_MASK);
>>>>> +     max77686_update_reg(i2c, MAX77686_REG_BUCK3CTRL1,
>>>>> +             max77686->ramp_delay << 6, RAMP_MASK);
>>>>> +     max77686_update_reg(i2c, MAX77686_REG_BUCK4CTRL1,
>>>>> +             max77686->ramp_delay << 6, RAMP_MASK);
>>>>> +
>>>>
>>>>
>>>> Why do you use i2c client still? If you registered regmap you can use
>>>> its API. I recommend you to use regmap_update_bits() directly.
>>>>
>>>>
>>>
>>> Yes, we are using regmap_update_bits().  max77686_update_reg() is just
>>> a wrapper over it.
>>>
>>
>>
>> Yes, i know what you mean. However it doesn't need max77686_update_reg()
>> any more since it uses regmap API. Why don't you just pass iodev->regmap
>> to regmap_update_bits(). It is clear that there is no reason for using
>> i2c client as a medium. Please check regulator and mfd driver of my
>> previous patch.
>>
> 
> I agree with you we can use directly  regmap API. But I preferred
> max77686_update_reg() because its a common practice to use
> common read/write API which we define in mfd driver to access
> that particular mfd device from other drivers.
> 
> Regards,
> Yadwinder.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 


I inform you my mfd driver has been confirmed by Samuel Oritz and there
is no mfd private API. This situation looks unusual that we registers
mfd driver and regulator driver separately. But how should we do? For
corporation , i'm asking you to consider my suggestion.

Thanks.


Thanks.



More information about the linux-arm-kernel mailing list