[PATCH 2/5] ARM: S3C24XX: move plat-s3c24xx/irq.c into common.c
Heiko Stübner
heiko at sntech.de
Mon May 7 13:41:33 EDT 2012
Again following the model set out by s3c64xx.
As checkpatch showed a lot of style errors and warning, these got fixed too.
Signed-off-by: Heiko Stueber <heiko at sntech.de>
---
arch/arm/mach-s3c24xx/common.c | 642 ++++++++++++++++++++++++++++++++++++++
arch/arm/plat-s3c24xx/Makefile | 1 -
arch/arm/plat-s3c24xx/irq.c | 676 ----------------------------------------
3 files changed, 642 insertions(+), 677 deletions(-)
delete mode 100644 arch/arm/plat-s3c24xx/irq.c
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index dc9927b..755d5f1 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -30,6 +30,7 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/syscore_ops.h>
#include <mach/hardware.h>
#include <mach/regs-clock.h>
@@ -43,10 +44,13 @@
#include <mach/regs-gpio.h>
#include <plat/regs-serial.h>
+#include <plat/regs-irqtype.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
#include <plat/s3c2410.h>
#include <plat/s3c2412.h>
#include <plat/s3c2416.h>
@@ -234,3 +238,641 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
}
+
+static void
+s3c_irq_mask(struct irq_data *data)
+{
+ unsigned int irqno = data->irq - IRQ_EINT0;
+ unsigned long mask;
+
+ mask = __raw_readl(S3C2410_INTMSK);
+ mask |= 1UL << irqno;
+ __raw_writel(mask, S3C2410_INTMSK);
+}
+
+static inline void
+s3c_irq_ack(struct irq_data *data)
+{
+ unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
+
+ __raw_writel(bitval, S3C2410_SRCPND);
+ __raw_writel(bitval, S3C2410_INTPND);
+}
+
+static inline void
+s3c_irq_maskack(struct irq_data *data)
+{
+ unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
+ unsigned long mask;
+
+ mask = __raw_readl(S3C2410_INTMSK);
+ __raw_writel(mask|bitval, S3C2410_INTMSK);
+
+ __raw_writel(bitval, S3C2410_SRCPND);
+ __raw_writel(bitval, S3C2410_INTPND);
+}
+
+
+static void
+s3c_irq_unmask(struct irq_data *data)
+{
+ unsigned int irqno = data->irq;
+ unsigned long mask;
+
+ if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23)
+ irqdbf2("s3c_irq_unmask %d\n", irqno);
+
+ irqno -= IRQ_EINT0;
+
+ mask = __raw_readl(S3C2410_INTMSK);
+ mask &= ~(1UL << irqno);
+ __raw_writel(mask, S3C2410_INTMSK);
+}
+
+struct irq_chip s3c_irq_level_chip = {
+ .name = "s3c-level",
+ .irq_ack = s3c_irq_maskack,
+ .irq_mask = s3c_irq_mask,
+ .irq_unmask = s3c_irq_unmask,
+ .irq_set_wake = s3c_irq_wake
+};
+
+struct irq_chip s3c_irq_chip = {
+ .name = "s3c",
+ .irq_ack = s3c_irq_ack,
+ .irq_mask = s3c_irq_mask,
+ .irq_unmask = s3c_irq_unmask,
+ .irq_set_wake = s3c_irq_wake
+};
+
+static void
+s3c_irqext_mask(struct irq_data *data)
+{
+ unsigned int irqno = data->irq - EXTINT_OFF;
+ unsigned long mask;
+
+ mask = __raw_readl(S3C24XX_EINTMASK);
+ mask |= (1UL << irqno);
+ __raw_writel(mask, S3C24XX_EINTMASK);
+}
+
+static void
+s3c_irqext_ack(struct irq_data *data)
+{
+ unsigned long req;
+ unsigned long bit;
+ unsigned long mask;
+
+ bit = 1UL << (data->irq - EXTINT_OFF);
+
+ mask = __raw_readl(S3C24XX_EINTMASK);
+
+ __raw_writel(bit, S3C24XX_EINTPEND);
+
+ req = __raw_readl(S3C24XX_EINTPEND);
+ req &= ~mask;
+
+ /* not sure if we should be acking the parent irq... */
+
+ if (data->irq <= IRQ_EINT7) {
+ if ((req & 0xf0) == 0)
+ s3c_irq_ack(irq_get_irq_data(IRQ_EINT4t7));
+ } else {
+ if ((req >> 8) == 0)
+ s3c_irq_ack(irq_get_irq_data(IRQ_EINT8t23));
+ }
+}
+
+static void
+s3c_irqext_unmask(struct irq_data *data)
+{
+ unsigned int irqno = data->irq - EXTINT_OFF;
+ unsigned long mask;
+
+ mask = __raw_readl(S3C24XX_EINTMASK);
+ mask &= ~(1UL << irqno);
+ __raw_writel(mask, S3C24XX_EINTMASK);
+}
+
+int
+s3c_irqext_type(struct irq_data *data, unsigned int type)
+{
+ void __iomem *extint_reg;
+ void __iomem *gpcon_reg;
+ unsigned long gpcon_offset, extint_offset;
+ unsigned long newvalue = 0, value;
+
+ if ((data->irq >= IRQ_EINT0) && (data->irq <= IRQ_EINT3)) {
+ gpcon_reg = S3C2410_GPFCON;
+ extint_reg = S3C24XX_EXTINT0;
+ gpcon_offset = (data->irq - IRQ_EINT0) * 2;
+ extint_offset = (data->irq - IRQ_EINT0) * 4;
+ } else if ((data->irq >= IRQ_EINT4) && (data->irq <= IRQ_EINT7)) {
+ gpcon_reg = S3C2410_GPFCON;
+ extint_reg = S3C24XX_EXTINT0;
+ gpcon_offset = (data->irq - (EXTINT_OFF)) * 2;
+ extint_offset = (data->irq - (EXTINT_OFF)) * 4;
+ } else if ((data->irq >= IRQ_EINT8) && (data->irq <= IRQ_EINT15)) {
+ gpcon_reg = S3C2410_GPGCON;
+ extint_reg = S3C24XX_EXTINT1;
+ gpcon_offset = (data->irq - IRQ_EINT8) * 2;
+ extint_offset = (data->irq - IRQ_EINT8) * 4;
+ } else if ((data->irq >= IRQ_EINT16) && (data->irq <= IRQ_EINT23)) {
+ gpcon_reg = S3C2410_GPGCON;
+ extint_reg = S3C24XX_EXTINT2;
+ gpcon_offset = (data->irq - IRQ_EINT8) * 2;
+ extint_offset = (data->irq - IRQ_EINT16) * 4;
+ } else {
+ return -1;
+ }
+
+ /* Set the GPIO to external interrupt mode */
+ value = __raw_readl(gpcon_reg);
+ value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
+ __raw_writel(value, gpcon_reg);
+
+ /* Set the external interrupt to pointed trigger type */
+ switch (type) {
+ case IRQ_TYPE_NONE:
+ pr_warn("No edge setting!\n");
+ break;
+
+ case IRQ_TYPE_EDGE_RISING:
+ newvalue = S3C2410_EXTINT_RISEEDGE;
+ break;
+
+ case IRQ_TYPE_EDGE_FALLING:
+ newvalue = S3C2410_EXTINT_FALLEDGE;
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ newvalue = S3C2410_EXTINT_BOTHEDGE;
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ newvalue = S3C2410_EXTINT_LOWLEV;
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ newvalue = S3C2410_EXTINT_HILEV;
+ break;
+
+ default:
+ pr_err("No such irq type %d", type);
+ return -1;
+ }
+
+ value = __raw_readl(extint_reg);
+ value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
+ __raw_writel(value, extint_reg);
+
+ return 0;
+}
+
+static struct irq_chip s3c_irqext_chip = {
+ .name = "s3c-ext",
+ .irq_mask = s3c_irqext_mask,
+ .irq_unmask = s3c_irqext_unmask,
+ .irq_ack = s3c_irqext_ack,
+ .irq_set_type = s3c_irqext_type,
+ .irq_set_wake = s3c_irqext_wake
+};
+
+static struct irq_chip s3c_irq_eint0t4 = {
+ .name = "s3c-ext0",
+ .irq_ack = s3c_irq_ack,
+ .irq_mask = s3c_irq_mask,
+ .irq_unmask = s3c_irq_unmask,
+ .irq_set_wake = s3c_irq_wake,
+ .irq_set_type = s3c_irqext_type,
+};
+
+/* mask values for the parent registers for each of the interrupt types */
+
+#define INTMSK_UART0 (1UL << (IRQ_UART0 - IRQ_EINT0))
+#define INTMSK_UART1 (1UL << (IRQ_UART1 - IRQ_EINT0))
+#define INTMSK_UART2 (1UL << (IRQ_UART2 - IRQ_EINT0))
+#define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0))
+
+
+/* UART0 */
+
+static void
+s3c_irq_uart0_mask(struct irq_data *data)
+{
+ s3c_irqsub_mask(data->irq, INTMSK_UART0, 7);
+}
+
+static void
+s3c_irq_uart0_unmask(struct irq_data *data)
+{
+ s3c_irqsub_unmask(data->irq, INTMSK_UART0);
+}
+
+static void
+s3c_irq_uart0_ack(struct irq_data *data)
+{
+ s3c_irqsub_maskack(data->irq, INTMSK_UART0, 7);
+}
+
+static struct irq_chip s3c_irq_uart0 = {
+ .name = "s3c-uart0",
+ .irq_mask = s3c_irq_uart0_mask,
+ .irq_unmask = s3c_irq_uart0_unmask,
+ .irq_ack = s3c_irq_uart0_ack,
+};
+
+/* UART1 */
+
+static void
+s3c_irq_uart1_mask(struct irq_data *data)
+{
+ s3c_irqsub_mask(data->irq, INTMSK_UART1, 7 << 3);
+}
+
+static void
+s3c_irq_uart1_unmask(struct irq_data *data)
+{
+ s3c_irqsub_unmask(data->irq, INTMSK_UART1);
+}
+
+static void
+s3c_irq_uart1_ack(struct irq_data *data)
+{
+ s3c_irqsub_maskack(data->irq, INTMSK_UART1, 7 << 3);
+}
+
+static struct irq_chip s3c_irq_uart1 = {
+ .name = "s3c-uart1",
+ .irq_mask = s3c_irq_uart1_mask,
+ .irq_unmask = s3c_irq_uart1_unmask,
+ .irq_ack = s3c_irq_uart1_ack,
+};
+
+/* UART2 */
+
+static void
+s3c_irq_uart2_mask(struct irq_data *data)
+{
+ s3c_irqsub_mask(data->irq, INTMSK_UART2, 7 << 6);
+}
+
+static void
+s3c_irq_uart2_unmask(struct irq_data *data)
+{
+ s3c_irqsub_unmask(data->irq, INTMSK_UART2);
+}
+
+static void
+s3c_irq_uart2_ack(struct irq_data *data)
+{
+ s3c_irqsub_maskack(data->irq, INTMSK_UART2, 7 << 6);
+}
+
+static struct irq_chip s3c_irq_uart2 = {
+ .name = "s3c-uart2",
+ .irq_mask = s3c_irq_uart2_mask,
+ .irq_unmask = s3c_irq_uart2_unmask,
+ .irq_ack = s3c_irq_uart2_ack,
+};
+
+/* ADC and Touchscreen */
+
+static void
+s3c_irq_adc_mask(struct irq_data *d)
+{
+ s3c_irqsub_mask(d->irq, INTMSK_ADCPARENT, 3 << 9);
+}
+
+static void
+s3c_irq_adc_unmask(struct irq_data *d)
+{
+ s3c_irqsub_unmask(d->irq, INTMSK_ADCPARENT);
+}
+
+static void
+s3c_irq_adc_ack(struct irq_data *d)
+{
+ s3c_irqsub_ack(d->irq, INTMSK_ADCPARENT, 3 << 9);
+}
+
+static struct irq_chip s3c_irq_adc = {
+ .name = "s3c-adc",
+ .irq_mask = s3c_irq_adc_mask,
+ .irq_unmask = s3c_irq_adc_unmask,
+ .irq_ack = s3c_irq_adc_ack,
+};
+
+/* irq demux for adc */
+static void s3c_irq_demux_adc(unsigned int irq,
+ struct irq_desc *desc)
+{
+ unsigned int subsrc, submsk;
+ unsigned int offset = 9;
+
+ /* read the current pending interrupts, and the mask
+ * for what it is available */
+
+ subsrc = __raw_readl(S3C2410_SUBSRCPND);
+ submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+ subsrc &= ~submsk;
+ subsrc >>= offset;
+ subsrc &= 3;
+
+ if (subsrc != 0) {
+ if (subsrc & 1)
+ generic_handle_irq(IRQ_TC);
+
+ if (subsrc & 2)
+ generic_handle_irq(IRQ_ADC);
+ }
+}
+
+static void s3c_irq_demux_uart(unsigned int start)
+{
+ unsigned int subsrc, submsk;
+ unsigned int offset = start - IRQ_S3CUART_RX0;
+
+ /* read the current pending interrupts, and the mask
+ * for what it is available */
+
+ subsrc = __raw_readl(S3C2410_SUBSRCPND);
+ submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+ irqdbf2("s3c_irq_demux_uart: start=%d (%d), subsrc=0x%08x,0x%08x\n",
+ start, offset, subsrc, submsk);
+
+ subsrc &= ~submsk;
+ subsrc >>= offset;
+ subsrc &= 7;
+
+ if (subsrc != 0) {
+ if (subsrc & 1)
+ generic_handle_irq(start);
+
+ if (subsrc & 2)
+ generic_handle_irq(start+1);
+
+ if (subsrc & 4)
+ generic_handle_irq(start+2);
+ }
+}
+
+/* uart demux entry points */
+
+static void
+s3c_irq_demux_uart0(unsigned int irq,
+ struct irq_desc *desc)
+{
+ irq = irq;
+ s3c_irq_demux_uart(IRQ_S3CUART_RX0);
+}
+
+static void
+s3c_irq_demux_uart1(unsigned int irq,
+ struct irq_desc *desc)
+{
+ irq = irq;
+ s3c_irq_demux_uart(IRQ_S3CUART_RX1);
+}
+
+static void
+s3c_irq_demux_uart2(unsigned int irq,
+ struct irq_desc *desc)
+{
+ irq = irq;
+ s3c_irq_demux_uart(IRQ_S3CUART_RX2);
+}
+
+static void
+s3c_irq_demux_extint8(unsigned int irq,
+ struct irq_desc *desc)
+{
+ unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
+ unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
+
+ eintpnd &= ~eintmsk;
+ eintpnd &= ~0xff; /* ignore lower irqs */
+
+ /* we may as well handle all the pending IRQs here */
+
+ while (eintpnd) {
+ irq = __ffs(eintpnd);
+ eintpnd &= ~(1<<irq);
+
+ irq += (IRQ_EINT4 - 4);
+ generic_handle_irq(irq);
+ }
+
+}
+
+static void
+s3c_irq_demux_extint4t7(unsigned int irq,
+ struct irq_desc *desc)
+{
+ unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
+ unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
+
+ eintpnd &= ~eintmsk;
+ eintpnd &= 0xff; /* only lower irqs */
+
+ /* we may as well handle all the pending IRQs here */
+
+ while (eintpnd) {
+ irq = __ffs(eintpnd);
+ eintpnd &= ~(1<<irq);
+
+ irq += (IRQ_EINT4 - 4);
+
+ generic_handle_irq(irq);
+ }
+}
+
+#ifdef CONFIG_FIQ
+/**
+ * s3c24xx_set_fiq - set the FIQ routing
+ * @irq: IRQ number to route to FIQ on processor.
+ * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
+ *
+ * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
+ * @on is true, the @irq is checked to see if it can be routed and the
+ * interrupt controller updated to route the IRQ. If @on is false, the FIQ
+ * routing is cleared, regardless of which @irq is specified.
+ */
+int s3c24xx_set_fiq(unsigned int irq, bool on)
+{
+ u32 intmod;
+ unsigned offs;
+
+ if (on) {
+ offs = irq - FIQ_START;
+ if (offs > 31)
+ return -EINVAL;
+
+ intmod = 1 << offs;
+ } else {
+ intmod = 0;
+ }
+
+ __raw_writel(intmod, S3C2410_INTMOD);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(s3c24xx_set_fiq);
+#endif
+
+
+/* s3c24xx_init_irq
+ *
+ * Initialise S3C2410 IRQ system
+*/
+
+void __init s3c24xx_init_irq(void)
+{
+ unsigned long pend;
+ unsigned long last;
+ int irqno;
+ int i;
+
+#ifdef CONFIG_FIQ
+ init_FIQ();
+#endif
+
+ irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
+
+ /* first, clear all interrupts pending... */
+
+ last = 0;
+ for (i = 0; i < 4; i++) {
+ pend = __raw_readl(S3C24XX_EINTPEND);
+
+ if (pend == 0 || pend == last)
+ break;
+
+ __raw_writel(pend, S3C24XX_EINTPEND);
+ irqdbf("irq: clearing pending ext status %08x\n", (int)pend);
+ last = pend;
+ }
+
+ last = 0;
+ for (i = 0; i < 4; i++) {
+ pend = __raw_readl(S3C2410_INTPND);
+
+ if (pend == 0 || pend == last)
+ break;
+
+ __raw_writel(pend, S3C2410_SRCPND);
+ __raw_writel(pend, S3C2410_INTPND);
+ irqdbf("irq: clearing pending status %08x\n", (int)pend);
+ last = pend;
+ }
+
+ last = 0;
+ for (i = 0; i < 4; i++) {
+ pend = __raw_readl(S3C2410_SUBSRCPND);
+
+ if (pend == 0 || pend == last)
+ break;
+
+ irqdbf("irq: clearing subpending status %08x\n", (int)pend);
+ __raw_writel(pend, S3C2410_SUBSRCPND);
+ last = pend;
+ }
+
+ /* register the main interrupts */
+
+ irqdbf("s3c2410_init_irq: registering s3c2410 interrupt handlers\n");
+
+ for (irqno = IRQ_EINT4t7; irqno <= IRQ_ADCPARENT; irqno++) {
+ /* set all the s3c2410 internal irqs */
+
+ switch (irqno) {
+ /* deal with the special IRQs (cascaded) */
+
+ case IRQ_EINT4t7:
+ case IRQ_EINT8t23:
+ case IRQ_UART0:
+ case IRQ_UART1:
+ case IRQ_UART2:
+ case IRQ_ADCPARENT:
+ irq_set_chip_and_handler(irqno, &s3c_irq_level_chip,
+ handle_level_irq);
+ break;
+
+ case IRQ_RESERVED6:
+ case IRQ_RESERVED24:
+ /* no IRQ here */
+ break;
+
+ default:
+ irqdbf("registering irq %d (s3c irq)\n", irqno);
+ irq_set_chip_and_handler(irqno, &s3c_irq_chip,
+ handle_edge_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+ }
+
+ /* setup the cascade irq handlers */
+
+ irq_set_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7);
+ irq_set_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8);
+
+ irq_set_chained_handler(IRQ_UART0, s3c_irq_demux_uart0);
+ irq_set_chained_handler(IRQ_UART1, s3c_irq_demux_uart1);
+ irq_set_chained_handler(IRQ_UART2, s3c_irq_demux_uart2);
+ irq_set_chained_handler(IRQ_ADCPARENT, s3c_irq_demux_adc);
+
+ /* external interrupts */
+
+ for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
+ irqdbf("registering irq %d (ext int)\n", irqno);
+ irq_set_chip_and_handler(irqno, &s3c_irq_eint0t4,
+ handle_edge_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ for (irqno = IRQ_EINT4; irqno <= IRQ_EINT23; irqno++) {
+ irqdbf("registering irq %d (extended s3c irq)\n", irqno);
+ irq_set_chip_and_handler(irqno, &s3c_irqext_chip,
+ handle_edge_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ /* register the uart interrupts */
+
+ irqdbf("s3c2410: registering external interrupts\n");
+
+ for (irqno = IRQ_S3CUART_RX0; irqno <= IRQ_S3CUART_ERR0; irqno++) {
+ irqdbf("registering irq %d (s3c uart0 irq)\n", irqno);
+ irq_set_chip_and_handler(irqno, &s3c_irq_uart0,
+ handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ for (irqno = IRQ_S3CUART_RX1; irqno <= IRQ_S3CUART_ERR1; irqno++) {
+ irqdbf("registering irq %d (s3c uart1 irq)\n", irqno);
+ irq_set_chip_and_handler(irqno, &s3c_irq_uart1,
+ handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ for (irqno = IRQ_S3CUART_RX2; irqno <= IRQ_S3CUART_ERR2; irqno++) {
+ irqdbf("registering irq %d (s3c uart2 irq)\n", irqno);
+ irq_set_chip_and_handler(irqno, &s3c_irq_uart2,
+ handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ for (irqno = IRQ_TC; irqno <= IRQ_ADC; irqno++) {
+ irqdbf("registering irq %d (s3c adc irq)\n", irqno);
+ irq_set_chip_and_handler(irqno, &s3c_irq_adc, handle_edge_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ irqdbf("s3c2410: registered interrupt handlers\n");
+}
+
+struct syscore_ops s3c24xx_irq_syscore_ops = {
+ .suspend = s3c24xx_irq_suspend,
+ .resume = s3c24xx_irq_resume,
+};
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index f7fe935..4ed80f2 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -12,7 +12,6 @@ obj- :=
# Core files
-obj-y += irq.o
obj-y += dev-uart.o
obj-y += clock.o
obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
deleted file mode 100644
index bc42c04..0000000
--- a/arch/arm/plat-s3c24xx/irq.c
+++ /dev/null
@@ -1,676 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/irq.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben at simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-#include <plat/regs-irqtype.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-static void
-s3c_irq_mask(struct irq_data *data)
-{
- unsigned int irqno = data->irq - IRQ_EINT0;
- unsigned long mask;
-
- mask = __raw_readl(S3C2410_INTMSK);
- mask |= 1UL << irqno;
- __raw_writel(mask, S3C2410_INTMSK);
-}
-
-static inline void
-s3c_irq_ack(struct irq_data *data)
-{
- unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
-
- __raw_writel(bitval, S3C2410_SRCPND);
- __raw_writel(bitval, S3C2410_INTPND);
-}
-
-static inline void
-s3c_irq_maskack(struct irq_data *data)
-{
- unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
- unsigned long mask;
-
- mask = __raw_readl(S3C2410_INTMSK);
- __raw_writel(mask|bitval, S3C2410_INTMSK);
-
- __raw_writel(bitval, S3C2410_SRCPND);
- __raw_writel(bitval, S3C2410_INTPND);
-}
-
-
-static void
-s3c_irq_unmask(struct irq_data *data)
-{
- unsigned int irqno = data->irq;
- unsigned long mask;
-
- if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23)
- irqdbf2("s3c_irq_unmask %d\n", irqno);
-
- irqno -= IRQ_EINT0;
-
- mask = __raw_readl(S3C2410_INTMSK);
- mask &= ~(1UL << irqno);
- __raw_writel(mask, S3C2410_INTMSK);
-}
-
-struct irq_chip s3c_irq_level_chip = {
- .name = "s3c-level",
- .irq_ack = s3c_irq_maskack,
- .irq_mask = s3c_irq_mask,
- .irq_unmask = s3c_irq_unmask,
- .irq_set_wake = s3c_irq_wake
-};
-
-struct irq_chip s3c_irq_chip = {
- .name = "s3c",
- .irq_ack = s3c_irq_ack,
- .irq_mask = s3c_irq_mask,
- .irq_unmask = s3c_irq_unmask,
- .irq_set_wake = s3c_irq_wake
-};
-
-static void
-s3c_irqext_mask(struct irq_data *data)
-{
- unsigned int irqno = data->irq - EXTINT_OFF;
- unsigned long mask;
-
- mask = __raw_readl(S3C24XX_EINTMASK);
- mask |= ( 1UL << irqno);
- __raw_writel(mask, S3C24XX_EINTMASK);
-}
-
-static void
-s3c_irqext_ack(struct irq_data *data)
-{
- unsigned long req;
- unsigned long bit;
- unsigned long mask;
-
- bit = 1UL << (data->irq - EXTINT_OFF);
-
- mask = __raw_readl(S3C24XX_EINTMASK);
-
- __raw_writel(bit, S3C24XX_EINTPEND);
-
- req = __raw_readl(S3C24XX_EINTPEND);
- req &= ~mask;
-
- /* not sure if we should be acking the parent irq... */
-
- if (data->irq <= IRQ_EINT7) {
- if ((req & 0xf0) == 0)
- s3c_irq_ack(irq_get_irq_data(IRQ_EINT4t7));
- } else {
- if ((req >> 8) == 0)
- s3c_irq_ack(irq_get_irq_data(IRQ_EINT8t23));
- }
-}
-
-static void
-s3c_irqext_unmask(struct irq_data *data)
-{
- unsigned int irqno = data->irq - EXTINT_OFF;
- unsigned long mask;
-
- mask = __raw_readl(S3C24XX_EINTMASK);
- mask &= ~(1UL << irqno);
- __raw_writel(mask, S3C24XX_EINTMASK);
-}
-
-int
-s3c_irqext_type(struct irq_data *data, unsigned int type)
-{
- void __iomem *extint_reg;
- void __iomem *gpcon_reg;
- unsigned long gpcon_offset, extint_offset;
- unsigned long newvalue = 0, value;
-
- if ((data->irq >= IRQ_EINT0) && (data->irq <= IRQ_EINT3)) {
- gpcon_reg = S3C2410_GPFCON;
- extint_reg = S3C24XX_EXTINT0;
- gpcon_offset = (data->irq - IRQ_EINT0) * 2;
- extint_offset = (data->irq - IRQ_EINT0) * 4;
- } else if ((data->irq >= IRQ_EINT4) && (data->irq <= IRQ_EINT7)) {
- gpcon_reg = S3C2410_GPFCON;
- extint_reg = S3C24XX_EXTINT0;
- gpcon_offset = (data->irq - (EXTINT_OFF)) * 2;
- extint_offset = (data->irq - (EXTINT_OFF)) * 4;
- } else if ((data->irq >= IRQ_EINT8) && (data->irq <= IRQ_EINT15)) {
- gpcon_reg = S3C2410_GPGCON;
- extint_reg = S3C24XX_EXTINT1;
- gpcon_offset = (data->irq - IRQ_EINT8) * 2;
- extint_offset = (data->irq - IRQ_EINT8) * 4;
- } else if ((data->irq >= IRQ_EINT16) && (data->irq <= IRQ_EINT23)) {
- gpcon_reg = S3C2410_GPGCON;
- extint_reg = S3C24XX_EXTINT2;
- gpcon_offset = (data->irq - IRQ_EINT8) * 2;
- extint_offset = (data->irq - IRQ_EINT16) * 4;
- } else {
- return -1;
- }
-
- /* Set the GPIO to external interrupt mode */
- value = __raw_readl(gpcon_reg);
- value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
- __raw_writel(value, gpcon_reg);
-
- /* Set the external interrupt to pointed trigger type */
- switch (type)
- {
- case IRQ_TYPE_NONE:
- printk(KERN_WARNING "No edge setting!\n");
- break;
-
- case IRQ_TYPE_EDGE_RISING:
- newvalue = S3C2410_EXTINT_RISEEDGE;
- break;
-
- case IRQ_TYPE_EDGE_FALLING:
- newvalue = S3C2410_EXTINT_FALLEDGE;
- break;
-
- case IRQ_TYPE_EDGE_BOTH:
- newvalue = S3C2410_EXTINT_BOTHEDGE;
- break;
-
- case IRQ_TYPE_LEVEL_LOW:
- newvalue = S3C2410_EXTINT_LOWLEV;
- break;
-
- case IRQ_TYPE_LEVEL_HIGH:
- newvalue = S3C2410_EXTINT_HILEV;
- break;
-
- default:
- printk(KERN_ERR "No such irq type %d", type);
- return -1;
- }
-
- value = __raw_readl(extint_reg);
- value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
- __raw_writel(value, extint_reg);
-
- return 0;
-}
-
-static struct irq_chip s3c_irqext_chip = {
- .name = "s3c-ext",
- .irq_mask = s3c_irqext_mask,
- .irq_unmask = s3c_irqext_unmask,
- .irq_ack = s3c_irqext_ack,
- .irq_set_type = s3c_irqext_type,
- .irq_set_wake = s3c_irqext_wake
-};
-
-static struct irq_chip s3c_irq_eint0t4 = {
- .name = "s3c-ext0",
- .irq_ack = s3c_irq_ack,
- .irq_mask = s3c_irq_mask,
- .irq_unmask = s3c_irq_unmask,
- .irq_set_wake = s3c_irq_wake,
- .irq_set_type = s3c_irqext_type,
-};
-
-/* mask values for the parent registers for each of the interrupt types */
-
-#define INTMSK_UART0 (1UL << (IRQ_UART0 - IRQ_EINT0))
-#define INTMSK_UART1 (1UL << (IRQ_UART1 - IRQ_EINT0))
-#define INTMSK_UART2 (1UL << (IRQ_UART2 - IRQ_EINT0))
-#define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0))
-
-
-/* UART0 */
-
-static void
-s3c_irq_uart0_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_UART0, 7);
-}
-
-static void
-s3c_irq_uart0_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_UART0);
-}
-
-static void
-s3c_irq_uart0_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_UART0, 7);
-}
-
-static struct irq_chip s3c_irq_uart0 = {
- .name = "s3c-uart0",
- .irq_mask = s3c_irq_uart0_mask,
- .irq_unmask = s3c_irq_uart0_unmask,
- .irq_ack = s3c_irq_uart0_ack,
-};
-
-/* UART1 */
-
-static void
-s3c_irq_uart1_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_UART1, 7 << 3);
-}
-
-static void
-s3c_irq_uart1_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_UART1);
-}
-
-static void
-s3c_irq_uart1_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_UART1, 7 << 3);
-}
-
-static struct irq_chip s3c_irq_uart1 = {
- .name = "s3c-uart1",
- .irq_mask = s3c_irq_uart1_mask,
- .irq_unmask = s3c_irq_uart1_unmask,
- .irq_ack = s3c_irq_uart1_ack,
-};
-
-/* UART2 */
-
-static void
-s3c_irq_uart2_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_UART2, 7 << 6);
-}
-
-static void
-s3c_irq_uart2_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_UART2);
-}
-
-static void
-s3c_irq_uart2_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_UART2, 7 << 6);
-}
-
-static struct irq_chip s3c_irq_uart2 = {
- .name = "s3c-uart2",
- .irq_mask = s3c_irq_uart2_mask,
- .irq_unmask = s3c_irq_uart2_unmask,
- .irq_ack = s3c_irq_uart2_ack,
-};
-
-/* ADC and Touchscreen */
-
-static void
-s3c_irq_adc_mask(struct irq_data *d)
-{
- s3c_irqsub_mask(d->irq, INTMSK_ADCPARENT, 3 << 9);
-}
-
-static void
-s3c_irq_adc_unmask(struct irq_data *d)
-{
- s3c_irqsub_unmask(d->irq, INTMSK_ADCPARENT);
-}
-
-static void
-s3c_irq_adc_ack(struct irq_data *d)
-{
- s3c_irqsub_ack(d->irq, INTMSK_ADCPARENT, 3 << 9);
-}
-
-static struct irq_chip s3c_irq_adc = {
- .name = "s3c-adc",
- .irq_mask = s3c_irq_adc_mask,
- .irq_unmask = s3c_irq_adc_unmask,
- .irq_ack = s3c_irq_adc_ack,
-};
-
-/* irq demux for adc */
-static void s3c_irq_demux_adc(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
- unsigned int offset = 9;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= offset;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- generic_handle_irq(IRQ_TC);
- }
- if (subsrc & 2) {
- generic_handle_irq(IRQ_ADC);
- }
- }
-}
-
-static void s3c_irq_demux_uart(unsigned int start)
-{
- unsigned int subsrc, submsk;
- unsigned int offset = start - IRQ_S3CUART_RX0;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- irqdbf2("s3c_irq_demux_uart: start=%d (%d), subsrc=0x%08x,0x%08x\n",
- start, offset, subsrc, submsk);
-
- subsrc &= ~submsk;
- subsrc >>= offset;
- subsrc &= 7;
-
- if (subsrc != 0) {
- if (subsrc & 1)
- generic_handle_irq(start);
-
- if (subsrc & 2)
- generic_handle_irq(start+1);
-
- if (subsrc & 4)
- generic_handle_irq(start+2);
- }
-}
-
-/* uart demux entry points */
-
-static void
-s3c_irq_demux_uart0(unsigned int irq,
- struct irq_desc *desc)
-{
- irq = irq;
- s3c_irq_demux_uart(IRQ_S3CUART_RX0);
-}
-
-static void
-s3c_irq_demux_uart1(unsigned int irq,
- struct irq_desc *desc)
-{
- irq = irq;
- s3c_irq_demux_uart(IRQ_S3CUART_RX1);
-}
-
-static void
-s3c_irq_demux_uart2(unsigned int irq,
- struct irq_desc *desc)
-{
- irq = irq;
- s3c_irq_demux_uart(IRQ_S3CUART_RX2);
-}
-
-static void
-s3c_irq_demux_extint8(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
- unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
-
- eintpnd &= ~eintmsk;
- eintpnd &= ~0xff; /* ignore lower irqs */
-
- /* we may as well handle all the pending IRQs here */
-
- while (eintpnd) {
- irq = __ffs(eintpnd);
- eintpnd &= ~(1<<irq);
-
- irq += (IRQ_EINT4 - 4);
- generic_handle_irq(irq);
- }
-
-}
-
-static void
-s3c_irq_demux_extint4t7(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
- unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
-
- eintpnd &= ~eintmsk;
- eintpnd &= 0xff; /* only lower irqs */
-
- /* we may as well handle all the pending IRQs here */
-
- while (eintpnd) {
- irq = __ffs(eintpnd);
- eintpnd &= ~(1<<irq);
-
- irq += (IRQ_EINT4 - 4);
-
- generic_handle_irq(irq);
- }
-}
-
-#ifdef CONFIG_FIQ
-/**
- * s3c24xx_set_fiq - set the FIQ routing
- * @irq: IRQ number to route to FIQ on processor.
- * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
- *
- * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
- * @on is true, the @irq is checked to see if it can be routed and the
- * interrupt controller updated to route the IRQ. If @on is false, the FIQ
- * routing is cleared, regardless of which @irq is specified.
- */
-int s3c24xx_set_fiq(unsigned int irq, bool on)
-{
- u32 intmod;
- unsigned offs;
-
- if (on) {
- offs = irq - FIQ_START;
- if (offs > 31)
- return -EINVAL;
-
- intmod = 1 << offs;
- } else {
- intmod = 0;
- }
-
- __raw_writel(intmod, S3C2410_INTMOD);
- return 0;
-}
-
-EXPORT_SYMBOL_GPL(s3c24xx_set_fiq);
-#endif
-
-
-/* s3c24xx_init_irq
- *
- * Initialise S3C2410 IRQ system
-*/
-
-void __init s3c24xx_init_irq(void)
-{
- unsigned long pend;
- unsigned long last;
- int irqno;
- int i;
-
-#ifdef CONFIG_FIQ
- init_FIQ();
-#endif
-
- irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
-
- /* first, clear all interrupts pending... */
-
- last = 0;
- for (i = 0; i < 4; i++) {
- pend = __raw_readl(S3C24XX_EINTPEND);
-
- if (pend == 0 || pend == last)
- break;
-
- __raw_writel(pend, S3C24XX_EINTPEND);
- printk("irq: clearing pending ext status %08x\n", (int)pend);
- last = pend;
- }
-
- last = 0;
- for (i = 0; i < 4; i++) {
- pend = __raw_readl(S3C2410_INTPND);
-
- if (pend == 0 || pend == last)
- break;
-
- __raw_writel(pend, S3C2410_SRCPND);
- __raw_writel(pend, S3C2410_INTPND);
- printk("irq: clearing pending status %08x\n", (int)pend);
- last = pend;
- }
-
- last = 0;
- for (i = 0; i < 4; i++) {
- pend = __raw_readl(S3C2410_SUBSRCPND);
-
- if (pend == 0 || pend == last)
- break;
-
- printk("irq: clearing subpending status %08x\n", (int)pend);
- __raw_writel(pend, S3C2410_SUBSRCPND);
- last = pend;
- }
-
- /* register the main interrupts */
-
- irqdbf("s3c2410_init_irq: registering s3c2410 interrupt handlers\n");
-
- for (irqno = IRQ_EINT4t7; irqno <= IRQ_ADCPARENT; irqno++) {
- /* set all the s3c2410 internal irqs */
-
- switch (irqno) {
- /* deal with the special IRQs (cascaded) */
-
- case IRQ_EINT4t7:
- case IRQ_EINT8t23:
- case IRQ_UART0:
- case IRQ_UART1:
- case IRQ_UART2:
- case IRQ_ADCPARENT:
- irq_set_chip_and_handler(irqno, &s3c_irq_level_chip,
- handle_level_irq);
- break;
-
- case IRQ_RESERVED6:
- case IRQ_RESERVED24:
- /* no IRQ here */
- break;
-
- default:
- //irqdbf("registering irq %d (s3c irq)\n", irqno);
- irq_set_chip_and_handler(irqno, &s3c_irq_chip,
- handle_edge_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
- }
-
- /* setup the cascade irq handlers */
-
- irq_set_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7);
- irq_set_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8);
-
- irq_set_chained_handler(IRQ_UART0, s3c_irq_demux_uart0);
- irq_set_chained_handler(IRQ_UART1, s3c_irq_demux_uart1);
- irq_set_chained_handler(IRQ_UART2, s3c_irq_demux_uart2);
- irq_set_chained_handler(IRQ_ADCPARENT, s3c_irq_demux_adc);
-
- /* external interrupts */
-
- for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
- irqdbf("registering irq %d (ext int)\n", irqno);
- irq_set_chip_and_handler(irqno, &s3c_irq_eint0t4,
- handle_edge_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- for (irqno = IRQ_EINT4; irqno <= IRQ_EINT23; irqno++) {
- irqdbf("registering irq %d (extended s3c irq)\n", irqno);
- irq_set_chip_and_handler(irqno, &s3c_irqext_chip,
- handle_edge_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- /* register the uart interrupts */
-
- irqdbf("s3c2410: registering external interrupts\n");
-
- for (irqno = IRQ_S3CUART_RX0; irqno <= IRQ_S3CUART_ERR0; irqno++) {
- irqdbf("registering irq %d (s3c uart0 irq)\n", irqno);
- irq_set_chip_and_handler(irqno, &s3c_irq_uart0,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- for (irqno = IRQ_S3CUART_RX1; irqno <= IRQ_S3CUART_ERR1; irqno++) {
- irqdbf("registering irq %d (s3c uart1 irq)\n", irqno);
- irq_set_chip_and_handler(irqno, &s3c_irq_uart1,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- for (irqno = IRQ_S3CUART_RX2; irqno <= IRQ_S3CUART_ERR2; irqno++) {
- irqdbf("registering irq %d (s3c uart2 irq)\n", irqno);
- irq_set_chip_and_handler(irqno, &s3c_irq_uart2,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- for (irqno = IRQ_TC; irqno <= IRQ_ADC; irqno++) {
- irqdbf("registering irq %d (s3c adc irq)\n", irqno);
- irq_set_chip_and_handler(irqno, &s3c_irq_adc, handle_edge_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- irqdbf("s3c2410: registered interrupt handlers\n");
-}
-
-struct syscore_ops s3c24xx_irq_syscore_ops = {
- .suspend = s3c24xx_irq_suspend,
- .resume = s3c24xx_irq_resume,
-};
--
1.7.5.4
More information about the linux-arm-kernel
mailing list