[PATCH 1/2] ARM: EXYYNOS: Use EXYNOS4210_GPEx instead of EXYNOS4_GPEx
Kukjin Kim
kgene.kim at samsung.com
Thu May 24 04:35:34 EDT 2012
Joonyoung Shim wrote:
>
> Add to cc Grant Likely and Linus Walleij
>
> On 05/18/2012 11:18 AM, Joonyoung Shim wrote:
> > Also use EXYNOS4210_GPIO_Ex instead of EXYNOS4_GPIO_Ex. The GPEx gpios
> > exist only on Exynos4210 and there are no on Exynos4x12. Redefine them
> > to exact SoC name.
> >
> > Signed-off-by: Joonyoung Shim<jy0922.shim at samsung.com>
> > Signed-off-by: Kyungmin Park<kyungmin.park at samsung.com>
> > ---
> > arch/arm/mach-exynos/include/mach/gpio.h | 32
++++++++++++++--------
> ------
> > arch/arm/mach-exynos/mach-nuri.c | 16 +++++++-------
> > arch/arm/mach-exynos/mach-origen.c | 6 ++--
> > arch/arm/mach-exynos/mach-universal_c210.c | 32
++++++++++++++-------
> -------
> > arch/arm/mach-exynos/setup-fimc.c | 4 +-
> > drivers/gpio/gpio-samsung.c | 20 ++++++++--------
> > 6 files changed, 55 insertions(+), 55 deletions(-)
> >
> > diff --git a/arch/arm/mach-exynos/include/mach/gpio.h b/arch/arm/mach-
> exynos/include/mach/gpio.h
> > index eb24f1e..21c9bf1 100644
> > --- a/arch/arm/mach-exynos/include/mach/gpio.h
> > +++ b/arch/arm/mach-exynos/include/mach/gpio.h
> > @@ -26,11 +26,11 @@
> > #define EXYNOS4_GPIO_C1_NR (5)
> > #define EXYNOS4_GPIO_D0_NR (4)
> > #define EXYNOS4_GPIO_D1_NR (4)
> > -#define EXYNOS4_GPIO_E0_NR (5)
> > -#define EXYNOS4_GPIO_E1_NR (8)
> > -#define EXYNOS4_GPIO_E2_NR (6)
> > -#define EXYNOS4_GPIO_E3_NR (8)
> > -#define EXYNOS4_GPIO_E4_NR (8)
> > +#define EXYNOS4210_GPIO_E0_NR (5)
> > +#define EXYNOS4210_GPIO_E1_NR (8)
> > +#define EXYNOS4210_GPIO_E2_NR (6)
> > +#define EXYNOS4210_GPIO_E3_NR (8)
> > +#define EXYNOS4210_GPIO_E4_NR (8)
I think, splitting the gpios like following(common exynos4 and exynos4210 or
exynos4x12). So please just put the definitions for EXYNOS4210 GPIO after
EXYNOS4_GPIO_XXX.
diff --git a/arch/arm/mach-exynos/include/mach/gpio.h
b/arch/arm/mach-exynos/include/mach/gpio.h
index eb24f1e..910b611 100644
--- a/arch/arm/mach-exynos/include/mach/gpio.h
+++ b/arch/arm/mach-exynos/include/mach/gpio.h
@@ -26,17 +26,10 @@
#define EXYNOS4_GPIO_C1_NR (5)
#define EXYNOS4_GPIO_D0_NR (4)
#define EXYNOS4_GPIO_D1_NR (4)
-#define EXYNOS4_GPIO_E0_NR (5)
-#define EXYNOS4_GPIO_E1_NR (8)
-#define EXYNOS4_GPIO_E2_NR (6)
-#define EXYNOS4_GPIO_E3_NR (8)
-#define EXYNOS4_GPIO_E4_NR (8)
#define EXYNOS4_GPIO_F0_NR (8)
#define EXYNOS4_GPIO_F1_NR (8)
#define EXYNOS4_GPIO_F2_NR (8)
#define EXYNOS4_GPIO_F3_NR (6)
-#define EXYNOS4_GPIO_J0_NR (8)
-#define EXYNOS4_GPIO_J1_NR (5)
#define EXYNOS4_GPIO_K0_NR (7)
#define EXYNOS4_GPIO_K1_NR (7)
#define EXYNOS4_GPIO_K2_NR (7)
@@ -57,6 +50,31 @@
#define EXYNOS4_GPIO_Y6_NR (8)
#define EXYNOS4_GPIO_Z_NR (7)
+/* For EXYNOS4210 GPIO bank sizes */
+
+#define EXYNOS4210_GPIO_E0_NR (5)
+#define EXYNOS4210_GPIO_E1_NR (8)
+#define EXYNOS4210_GPIO_E2_NR (6)
+#define EXYNOS4210_GPIO_E3_NR (8)
+#define EXYNOS4210_GPIO_E4_NR (8)
+#define EXYNOS4210_GPIO_J0_NR (8)
+#define EXYNOS4210_GPIO_J1_NR (5)
[...]
And we can add EXYNOS4X12 GPIO like following in other patch.
+/* For EXYNOS4X12 GPIO bank sizes */
+
+#define EXYNOS4X12_GPIO_J0_NR (8)
+#define EXYNOS4X12_GPIO_J1_NR (5)
+#define EXYNOS4X12_GPIO_M0_NR (8)
+#define EXYNOS4X12_GPIO_M1_NR (7)
+#define EXYNOS4X12_GPIO_M2_NR (5)
+#define EXYNOS4X12_GPIO_M3_NR (8)
+#define EXYNOS4X12_GPIO_M4_NR (8)
+#define EXYNOS4X12_GPIO_V0_NR (8)
+#define EXYNOS4X12_GPIO_V1_NR (8)
+#define EXYNOS4X12_GPIO_V2_NR (8)
+#define EXYNOS4X12_GPIO_V3_NR (8)
+#define EXYNOS4X12_GPIO_V4_NR (2)
> > #define EXYNOS4_GPIO_F0_NR (8)
> > #define EXYNOS4_GPIO_F1_NR (8)
> > #define EXYNOS4_GPIO_F2_NR (8)
> > @@ -67,12 +67,12 @@ enum exynos4_gpio_number {
> > EXYNOS4_GPIO_C1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_C0),
> > EXYNOS4_GPIO_D0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_C1),
> > EXYNOS4_GPIO_D1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_D0),
> > - EXYNOS4_GPIO_E0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_D1),
> > - EXYNOS4_GPIO_E1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E0),
> > - EXYNOS4_GPIO_E2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E1),
> > - EXYNOS4_GPIO_E3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E2),
> > - EXYNOS4_GPIO_E4_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E3),
> > - EXYNOS4_GPIO_F0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E4),
> > + EXYNOS4210_GPIO_E0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_D1),
> > + EXYNOS4210_GPIO_E1_START =
EXYNOS_GPIO_NEXT(EXYNOS4210_GPIO_E0),
> > + EXYNOS4210_GPIO_E2_START =
EXYNOS_GPIO_NEXT(EXYNOS4210_GPIO_E1),
> > + EXYNOS4210_GPIO_E3_START =
EXYNOS_GPIO_NEXT(EXYNOS4210_GPIO_E2),
> > + EXYNOS4210_GPIO_E4_START =
EXYNOS_GPIO_NEXT(EXYNOS4210_GPIO_E3),
> > + EXYNOS4_GPIO_F0_START = EXYNOS_GPIO_NEXT(EXYNOS4210_GPIO_E4),
> > EXYNOS4_GPIO_F1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F0),
> > EXYNOS4_GPIO_F2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F1),
> > EXYNOS4_GPIO_F3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F2),
Same as above.
@@ -99,6 +117,31 @@ enum exynos4_gpio_number {
EXYNOS4_GPIO_Z_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y6),
};
+enum exynos4210_gpio_number {
+ EXYNOS4210_GPIO_E0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Z),
+ EXYNOS4210_GPIO_E1_START =
EXYNOS4_GPIO_NEXT(EXYNOS4210_GPIO_E0),
+ EXYNOS4210_GPIO_E2_START =
EXYNOS4_GPIO_NEXT(EXYNOS4210_GPIO_E1),
+ EXYNOS4210_GPIO_E3_START =
EXYNOS4_GPIO_NEXT(EXYNOS4210_GPIO_E2),
+ EXYNOS4210_GPIO_E4_START =
EXYNOS4_GPIO_NEXT(EXYNOS4210_GPIO_E3),
+ EXYNOS4210_GPIO_J0_START =
EXYNOS4_GPIO_NEXT(EXYNOS4210_GPIO_E4),
+ EXYNOS4210_GPIO_J1_START =
EXYNOS4_GPIO_NEXT(EXYNOS4210_GPIO_J0),
+};
[...]
And following is possible for EXYNOS4X12...
+enum exynos4x12_gpio_number {
+ EXYNOS4X12_GPIO_J0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Z),
+ EXYNOS4X12_GPIO_J1_START =
EXYNOS4_GPIO_NEXT(EXYNOS4X12_GPIO_J0),
+ EXYNOS4X12_GPIO_M0_START =
EXYNOS4_GPIO_NEXT(EXYNOS4X12_GPIO_J1),
+ EXYNOS4X12_GPIO_M1_START =
EXYNOS4_GPIO_NEXT(EXYNOS4X12_GPIO_M0),
+ EXYNOS4X12_GPIO_M2_START =
EXYNOS4_GPIO_NEXT(EXYNOS4X12_GPIO_M1),
+ EXYNOS4X12_GPIO_M3_START =
EXYNOS4_GPIO_NEXT(EXYNOS4X12_GPIO_M2),
+ EXYNOS4X12_GPIO_M4_START =
EXYNOS4_GPIO_NEXT(EXYNOS4X12_GPIO_M3),
+ EXYNOS4X12_GPIO_V0_START =
EXYNOS4_GPIO_NEXT(EXYNOS4X12_GPIO_M4),
+ EXYNOS4X12_GPIO_V1_START =
EXYNOS4_GPIO_NEXT(EXYNOS4X12_GPIO_V0),
+ EXYNOS4X12_GPIO_V2_START =
EXYNOS4_GPIO_NEXT(EXYNOS4X12_GPIO_V1),
+ EXYNOS4X12_GPIO_V3_START =
EXYNOS4_GPIO_NEXT(EXYNOS4X12_GPIO_V2),
+ EXYNOS4X12_GPIO_V4_START =
EXYNOS4_GPIO_NEXT(EXYNOS4X12_GPIO_V3),
+};
+
/* EXYNOS4 GPIO number definitions */
#define EXYNOS4_GPA0(_nr) (EXYNOS4_GPIO_A0_START + (_nr))
[...]
Of course, need to update other regarding gpio part accordingly.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
More information about the linux-arm-kernel
mailing list