[PATCH 2/3] ARM: mxs: add initial device tree support for imx23-evk board
Shawn Guo
shawn.guo at linaro.org
Mon May 7 10:11:29 EDT 2012
It adds initial device tree support for imx23-evk board, and only
serial console is enabled.
Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
---
Documentation/devicetree/bindings/arm/fsl.txt | 4 +
arch/arm/boot/dts/imx23-evk.dts | 32 ++++
arch/arm/boot/dts/imx23.dtsi | 243 +++++++++++++++++++++++++
arch/arm/mach-mxs/Kconfig | 1 +
arch/arm/mach-mxs/mach-mxs.c | 24 +++
drivers/clk/mxs/clk-imx23.c | 1 +
6 files changed, 305 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/imx23-evk.dts
create mode 100644 arch/arm/boot/dts/imx23.dtsi
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index fecb580..1708df5 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -1,6 +1,10 @@
Freescale i.MX Platforms Device Tree Bindings
-----------------------------------------------
+i.MX23 Evaluation Kit
+Required root node properties:
+ - compatible = "fsl,imx23-evk", "fsl,imx23";
+
i.MX28 Evaluation Kit
Required root node properties:
- compatible = "fsl,imx28-evk", "fsl,imx28";
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
new file mode 100644
index 0000000..8cad51e
--- /dev/null
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx23.dtsi"
+
+/ {
+ model = "Freescale i.MX23 Evaluation Kit";
+ compatible = "fsl,imx23-evk", "fsl,imx23";
+
+ memory {
+ reg = <0x40000000 0x08000000>;
+ };
+
+ apb at 80000000 {
+ apbx at 80040000 {
+ duart: serial at 80070000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_a>;
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
new file mode 100644
index 0000000..fb09ccd
--- /dev/null
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -0,0 +1,243 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&icoll>;
+
+ cpus {
+ cpu at 0 {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ apb at 80000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x80000>;
+ ranges;
+
+ apbh at 80000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x40000>;
+ ranges;
+
+ icoll: interrupt-controller at 80000000 {
+ compatible = "fsl,imx23-icoll", "fsl,mxs-icoll";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x80000000 0x2000>;
+ };
+
+ dma-apbh at 80004000 {
+ reg = <0x80004000 2000>;
+ status = "disabled";
+ };
+
+ ecc at 80008000 {
+ reg = <0x80008000 2000>;
+ status = "disabled";
+ };
+
+ bch at 8000a000 {
+ reg = <0x8000a000 2000>;
+ status = "disabled";
+ };
+
+ gpmi at 8000c000 {
+ reg = <0x8000c000 2000>;
+ status = "disabled";
+ };
+
+ ssp0: ssp at 80010000 {
+ reg = <0x80010000 2000>;
+ status = "disabled";
+ };
+
+ etm at 80014000 {
+ reg = <0x80014000 2000>;
+ status = "disabled";
+ };
+
+ pinctrl at 80018000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx23-pinctrl";
+ reg = <0x80018000 2000>;
+
+ duart_pins_a: duart at 0 {
+ reg = <0>;
+ fsl,pinmux-ids = <0x11a2 0x11b2>;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+ };
+
+ digctl at 8001c000 {
+ reg = <0x8001c000 2000>;
+ status = "disabled";
+ };
+
+ emi at 80020000 {
+ reg = <0x80020000 2000>;
+ status = "disabled";
+ };
+
+ dma-apbx at 80024000 {
+ reg = <0x80024000 2000>;
+ status = "disabled";
+ };
+
+ dcp at 80028000 {
+ reg = <0x80028000 2000>;
+ status = "disabled";
+ };
+
+ pxp at 8002a000 {
+ reg = <0x8002a000 2000>;
+ status = "disabled";
+ };
+
+ ocotp at 8002c000 {
+ reg = <0x8002c000 2000>;
+ status = "disabled";
+ };
+
+ axi-ahb at 8002e000 {
+ reg = <0x8002e000 2000>;
+ status = "disabled";
+ };
+
+ lcdif at 80030000 {
+ reg = <0x80030000 2000>;
+ status = "disabled";
+ };
+
+ ssp1: ssp at 80034000 {
+ reg = <0x80034000 2000>;
+ status = "disabled";
+ };
+
+ tvenc at 80038000 {
+ reg = <0x80038000 2000>;
+ status = "disabled";
+ };
+ };
+
+ apbx at 80040000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80040000 0x40000>;
+ ranges;
+
+ clkctl at 80040000 {
+ reg = <0x80040000 2000>;
+ status = "disabled";
+ };
+
+ saif0: saif at 80042000 {
+ reg = <0x80042000 2000>;
+ status = "disabled";
+ };
+
+ power at 80044000 {
+ reg = <0x80044000 2000>;
+ status = "disabled";
+ };
+
+ saif1: saif at 80046000 {
+ reg = <0x80046000 2000>;
+ status = "disabled";
+ };
+
+ audio-out at 80048000 {
+ reg = <0x80048000 2000>;
+ status = "disabled";
+ };
+
+ audio-in at 8004c000 {
+ reg = <0x8004c000 2000>;
+ status = "disabled";
+ };
+
+ lradc at 80050000 {
+ reg = <0x80050000 2000>;
+ status = "disabled";
+ };
+
+ spdif at 80054000 {
+ reg = <0x80054000 2000>;
+ status = "disabled";
+ };
+
+ i2c at 80058000 {
+ reg = <0x80058000 2000>;
+ status = "disabled";
+ };
+
+ rtc at 8005c000 {
+ reg = <0x8005c000 2000>;
+ status = "disabled";
+ };
+
+ pwm at 80064000 {
+ reg = <0x80064000 2000>;
+ status = "disabled";
+ };
+
+ timrot at 80068000 {
+ reg = <0x80068000 2000>;
+ status = "disabled";
+ };
+
+ auart0: serial at 8006c000 {
+ reg = <0x8006c000 0x2000>;
+ status = "disabled";
+ };
+
+ auart1: serial at 8006e000 {
+ reg = <0x8006e000 0x2000>;
+ status = "disabled";
+ };
+
+ duart: serial at 80070000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x80070000 0x2000>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
+ usbphy at 8007c000 {
+ reg = <0x8007c000 0x2000>;
+ status = "disabled";
+ };
+ };
+ };
+
+ ahb at 80080000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80080000 0x80000>;
+ ranges;
+
+ usbctrl at 80080000 {
+ reg = <0x80080000 0x10000>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 15bb4e2..8138a13 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -23,6 +23,7 @@ comment "MXS platforms:"
config MACH_MXS_DT
bool "Support MXS platforms from device tree"
+ select SOC_IMX23
select SOC_IMX28
select USE_OF
help
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 5d81a23..182ea75 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -41,6 +41,15 @@ static void __init mxs_dt_init_irq(void)
of_irq_init(mxs_irq_match);
}
+static void __init imx23_timer_init(void)
+{
+ mx23_clocks_init();
+}
+
+static struct sys_timer imx23_timer = {
+ .init = imx23_timer_init,
+};
+
static void __init imx28_timer_init(void)
{
mx28_clocks_init();
@@ -69,12 +78,27 @@ static void __init mxs_machine_init(void)
NULL, NULL);
}
+static const char *imx23_dt_compat[] __initdata = {
+ "fsl,imx23-evk",
+ "fsl,imx23",
+ NULL,
+};
+
static const char *imx28_dt_compat[] __initdata = {
"fsl,imx28-evk",
"fsl,imx28",
NULL,
};
+DT_MACHINE_START(IMX23, "Freescale i.MX23 (Device Tree)")
+ .map_io = mx23_map_io,
+ .init_irq = mxs_dt_init_irq,
+ .timer = &imx23_timer,
+ .init_machine = mxs_machine_init,
+ .dt_compat = imx23_dt_compat,
+ .restart = mxs_restart,
+MACHINE_END
+
DT_MACHINE_START(IMX28, "Freescale i.MX28 (Device Tree)")
.map_io = mx28_map_io,
.init_irq = mxs_dt_init_irq,
diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c
index dcae112..07fe1f1 100644
--- a/drivers/clk/mxs/clk-imx23.c
+++ b/drivers/clk/mxs/clk-imx23.c
@@ -87,6 +87,7 @@ static struct clk_lookup hbus_lookups[] __initdata = {
static struct clk_lookup xbus_lookups[] __initdata = {
{ .dev_id = "duart", .con_id = "apb_pclk"},
+ { .dev_id = "80070000.serial", .con_id = "apb_pclk"},
{ .dev_id = "mxs-dma-apbx", },
{ .dev_id = "80024000.dma-apbx", },
};
--
1.7.5.4
More information about the linux-arm-kernel
mailing list