[GIT PULL] imx device tree changes for v3.5
Shawn Guo
shawn.guo at linaro.org
Fri May 11 23:07:25 EDT 2012
Hi Arnd, Olof,
Please pull the following imx device tree changes for v3.5. I chose
to base it on Sascha's imx-common-clk series than -rc, because otherwise
it will keep patching clock file that has been removed by imx-common-clk
series. It also depends on imx-pinctrl pull-request I just sent to be
functional.
Note: when imx-common-clk and imx-pinctrl get merged together, the
following files will have conflicts. But the conflicts should not be
so hard to resolve.
Conflicts:
drivers/mmc/host/sdhci-esdhc-imx.c
drivers/net/ethernet/freescale/fec.c
drivers/spi/spi-imx.c
drivers/tty/serial/imx.c
If you prefer, I can rebase my imx-pinctrl on top of imx-common-clk
to save the conflicts.
Regards,
Shawn
The following changes since commit c818f97bc3266f0fbf619f2348d951272f8ac335:
ARM i.MX: remove now unused clock files (2012-05-09 09:00:40 +0200)
are available in the git repository at:
git://git.linaro.org/people/shawnguo/linux-2.6.git imx/dt/for-3.5
Dirk Behme (1):
ARM: imx6: Add UART2 for low-level debug
Dong Aisheng (1):
ARM: dts: imx6q-arm2: add pinctrl state for usdhc
Fabio Estevam (4):
ARM: dts: imx: Remove bootargs field
ARM: imx6q-arm2: Remove hardcoded mac address
ARM: dts: Add basic support for imx6q-sabresd
ARM: dts: imx6q-sabrelite: Add SPI NOR support
Richard Zhao (9):
ARM: imx6q: move imx6q_sabrelite specific code to a dedicated function
ARM: dts: imx6q-sabrelite: add ssi device
ARM: dts: imx6q-sabrelite: add audmux device
ARM: dts: imx6q-sabrelite: add i2c1 pinctrl support
ARM: dts: imx6q-sabrelite: add audmux pinctrl support
ARM: imx6q: add ssi1_ipg clk_lookup
ARM: imx6q_sabrelite: clk_register_clkdev cko1 for sgtl5000
ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000
ARM: dts: imx6q-sabrelite: add serial2 pinctrl support
Shawn Guo (7):
ARM: imx: rename uart and fec device tree nodes
ARM: imx6q: register phy fixup only when CONFIG_PHYLIB is enabled
ARM: imx: add more imx5 ssi clocks
ARM: imx: add audmux pad setting for imx51-babbage
ARM: imx: add audio codec clk lookup for imx53-qsb
ARM: dts: imx51-babbage: enable audio support
ARM: dts: imx53-qsb: enable audio support
Ying-Chun Liu (PaulLiu) (2):
ARM: dts: imx6q: add anatop regulators
ARM: dts: imx53-qsb: Add Dialog DA9053 PMIC support
Documentation/devicetree/bindings/arm/fsl.txt | 4 +
Documentation/devicetree/bindings/net/fsl-fec.txt | 2 +-
.../bindings/tty/serial/fsl-imx-uart.txt | 2 +-
arch/arm/Kconfig.debug | 8 +
arch/arm/boot/dts/imx27-phytec-phycore.dts | 8 +-
arch/arm/boot/dts/imx27.dtsi | 14 +-
arch/arm/boot/dts/imx51-babbage.dts | 40 ++++-
arch/arm/boot/dts/imx51.dtsi | 41 +++++-
arch/arm/boot/dts/imx53-ard.dts | 6 +-
arch/arm/boot/dts/imx53-evk.dts | 8 +-
arch/arm/boot/dts/imx53-qsb.dts | 121 +++++++++++++-
arch/arm/boot/dts/imx53-smd.dts | 12 +-
arch/arm/boot/dts/imx53.dtsi | 45 +++++-
arch/arm/boot/dts/imx6q-arm2.dts | 13 +-
arch/arm/boot/dts/imx6q-sabrelite.dts | 50 ++++++-
arch/arm/boot/dts/imx6q-sabresd.dts | 53 ++++++
arch/arm/boot/dts/imx6q.dtsi | 171 ++++++++++++++++++-
arch/arm/mach-imx/Makefile.boot | 3 +-
arch/arm/mach-imx/clk-imx51-imx53.c | 40 +++++
arch/arm/mach-imx/clk-imx6q.c | 35 +++--
arch/arm/mach-imx/imx53-dt.c | 19 +++
arch/arm/mach-imx/lluart.c | 6 +
arch/arm/mach-imx/mach-imx6q.c | 55 ++++++-
arch/arm/mach-imx/mach-mx51_babbage.c | 6 +
arch/arm/plat-mxc/include/mach/debug-macro.S | 2 +
arch/arm/plat-mxc/include/mach/mx6q.h | 2 +
26 files changed, 664 insertions(+), 102 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6q-sabresd.dts
More information about the linux-arm-kernel
mailing list