[PATCH 2/3] OMAP: 4430SDP: Use common configuration for V1V8, V2V1 supplies

[Peter Ujfalusi]

These supplies going to be needed for the twl6040 driver.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
---
 arch/arm/mach-omap2/board-4430sdp.c |    4 +++-
 1 files changed, 3 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 130ab00..c8d38bd 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -615,7 +615,9 @@ static int __init omap4_i2c_init(void)
 			TWL_COMMON_REGULATOR_VANA |
 			TWL_COMMON_REGULATOR_VCXIO |
 			TWL_COMMON_REGULATOR_VUSB |
-			TWL_COMMON_REGULATOR_CLK32KG);
+			TWL_COMMON_REGULATOR_CLK32KG |
+			TWL_COMMON_REGULATOR_V1V8 |
+			TWL_COMMON_REGULATOR_V2V1);
 	omap4_pmic_init("twl6030", &sdp4430_twldata,
 			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
 	omap_register_i2c_bus(2, 400, NULL, 0);
-- 
1.7.8.6