[PATCH 10/11] ARM: imx6q_sabrelite: clkdev_add cko1 for sgtl5000

[Shawn Guo]

On Fri, Apr 27, 2012 at 03:03:04PM +0800, Richard Zhao wrote:
> Signed-off-by: Richard Zhao <richard.zhao at freescale.com>
> ---
>  arch/arm/mach-imx/clk-imx6q.c  |    3 +++
>  arch/arm/mach-imx/mach-imx6q.c |   28 ++++++++++++++++++++++++++++
>  2 files changed, 31 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
> index 9a03dcc..4ea0de0 100644
> --- a/arch/arm/mach-imx/clk-imx6q.c
> +++ b/arch/arm/mach-imx/clk-imx6q.c
> @@ -419,6 +419,9 @@ int __init mx6q_clocks_init(void)
>  	clk_register_clkdev(clk[dummy], NULL, "20bc000.wdog");
>  	clk_register_clkdev(clk[dummy], NULL, "20c0000.wdog");
>  	clk_register_clkdev(clk[ssi1], NULL, "2028000.ssi");
> +	clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
> +	clk_register_clkdev(clk[ahb], "ahb", NULL);
> +	clk_register_clkdev(clk[cko1], "cko1", NULL);
>  
>  	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) {
>  		c = clk_get_sys(clks_init_on[i], NULL);
> diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
> index d25c5d8..e9b2522 100644
> --- a/arch/arm/mach-imx/mach-imx6q.c
> +++ b/arch/arm/mach-imx/mach-imx6q.c
> @@ -10,6 +10,8 @@
>   * http://www.gnu.org/copyleft/gpl.html
>   */
>  
> +#include <linux/clkdev.h>
> +#include <linux/clk.h>

Nit: I would have <linux/clk.h> put before <linux/clkdev.h>.

>  #include <linux/delay.h>
>  #include <linux/init.h>
>  #include <linux/io.h>
> @@ -75,10 +77,36 @@ static int ksz9021rn_phy_fixup(struct phy_device *phydev)
>  	return 0;
>  }
>  
> +static void __init imx6q_cko1_setup(void)

I would say this is a sabrelite specific setup so far.

> +{
> +	struct clk *cko1_sel, *ahb, *cko1;
> +	unsigned long rate;
> +
> +	cko1_sel = clk_get_sys(NULL, "cko1_sel");
> +	ahb = clk_get_sys(NULL, "ahb");
> +	cko1 = clk_get_sys(NULL, "cko1");
> +	if (IS_ERR(cko1_sel) || IS_ERR(ahb) || IS_ERR(cko1)) {
> +		printk(KERN_ERR "cko1 setup failed!\n");

pr_err

> +		goto put_clk;
> +	}
> +	clk_set_parent(cko1_sel, ahb);
> +	rate = clk_round_rate(cko1, 16000000);
> +	clk_set_rate(cko1, rate);
> +	clk_register_clkdev(cko1, NULL, "0-000a");

This dev_id looks a little strange to me.  I understand that's the
consequence of having sgtl5000 clock managed in ASoC machine driver
imx-sgtl5000.  IMO, having sgtl5000 driver manages its clock and
looking up the clock with dev_id simply as "sgtl5000" makes more
sense to me.  Will put more comment on your imx-sgtl5000 clock patch.

Regards,
Shawn

> +put_clk:
> +	if (!IS_ERR(cko1_sel))
> +		clk_put(cko1_sel);
> +	if (!IS_ERR(ahb))
> +		clk_put(ahb);
> +	if (!IS_ERR(cko1))
> +		clk_put(cko1);
> +}
> +
>  static void __init imx6q_sabrelite_init(void)
>  {
>  	phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
>  				ksz9021rn_phy_fixup);
> +	imx6q_cko1_setup();
>  }
>  
>  static void __init imx6q_init_machine(void)
> -- 
> 1.7.5.4
> 
>