[PATCHv2 01/19] ARM: OMAP4: PM: powerdomain: Add HWSAR flag to L3INIT

[Tero Kristo]

From: Santosh Shilimkar <santosh.shilimkar at ti.com>

L3INIT powerdomain has USB HOST and USB TLL modules which support
hardware save-and-restore (HW SAR) mechanism.
This patch updates the L3INIT power domain to mark them as capable
of doing H/w save and restore and provides functions to do them
explicitly.

Note: Eventually, these custom function implementation will be
abstracted and might be done in hwmod or in other layer.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
Signed-off-by: Tero Kristo <t-kristo at ti.com>
---
 arch/arm/mach-omap2/powerdomain44xx.c       |   41 +++++++++++++++++++++++++++
 arch/arm/mach-omap2/powerdomains44xx_data.c |    2 +-
 2 files changed, 42 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/powerdomain44xx.c b/arch/arm/mach-omap2/powerdomain44xx.c
index ab00736..37f7e12 100644
--- a/arch/arm/mach-omap2/powerdomain44xx.c
+++ b/arch/arm/mach-omap2/powerdomain44xx.c
@@ -23,6 +23,10 @@
 #include "prm44xx.h"
 #include "prminst44xx.h"
 #include "prm-regbits-44xx.h"
+#include "cm-regbits-44xx.h"
+#include "prcm44xx.h"
+#include "cm2_44xx.h"
+#include "cminst44xx.h"
 
 static int omap4_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
 {
@@ -238,6 +242,41 @@ static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm)
 	return 0;
 }
 
+static int omap4_pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
+{
+	/*
+	 * FIXME: This should be fixed right way by moving it into HWMOD
+	 * or clock framework since sar control is moved to module level
+	 */
+	omap4_cminst_rmw_inst_reg_bits(OMAP4430_SAR_MODE_MASK,
+		1 << OMAP4430_SAR_MODE_SHIFT, OMAP4430_CM2_PARTITION,
+		OMAP4430_CM2_L3INIT_INST,
+		OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET);
+	omap4_cminst_rmw_inst_reg_bits(OMAP4430_SAR_MODE_MASK,
+		1 << OMAP4430_SAR_MODE_SHIFT, OMAP4430_CM2_PARTITION,
+		OMAP4430_CM2_L3INIT_INST,
+		OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET);
+	return 0;
+}
+
+static int omap4_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
+{
+	/*
+	 * FIXME: This should be fixed right way by moving it into HWMOD
+	 * or clock framework since sar control is moved to module level
+	 */
+	omap4_cminst_rmw_inst_reg_bits(OMAP4430_SAR_MODE_MASK,
+		0 << OMAP4430_SAR_MODE_SHIFT, OMAP4430_CM2_PARTITION,
+		OMAP4430_CM2_L3INIT_INST,
+		OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET);
+	omap4_cminst_rmw_inst_reg_bits(OMAP4430_SAR_MODE_MASK,
+		0 << OMAP4430_SAR_MODE_SHIFT, OMAP4430_CM2_PARTITION,
+		OMAP4430_CM2_L3INIT_INST,
+		OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET);
+
+	return 0;
+}
+
 struct pwrdm_ops omap4_pwrdm_operations = {
 	.pwrdm_set_next_pwrst	= omap4_pwrdm_set_next_pwrst,
 	.pwrdm_read_next_pwrst	= omap4_pwrdm_read_next_pwrst,
@@ -255,4 +294,6 @@ struct pwrdm_ops omap4_pwrdm_operations = {
 	.pwrdm_set_mem_onst	= omap4_pwrdm_set_mem_onst,
 	.pwrdm_set_mem_retst	= omap4_pwrdm_set_mem_retst,
 	.pwrdm_wait_transition	= omap4_pwrdm_wait_transition,
+	.pwrdm_enable_hdwr_sar	= omap4_pwrdm_enable_hdwr_sar,
+	.pwrdm_disable_hdwr_sar	= omap4_pwrdm_disable_hdwr_sar,
 };
diff --git a/arch/arm/mach-omap2/powerdomains44xx_data.c b/arch/arm/mach-omap2/powerdomains44xx_data.c
index 704664c..d8701ce 100644
--- a/arch/arm/mach-omap2/powerdomains44xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains44xx_data.c
@@ -276,7 +276,7 @@ static struct powerdomain l3init_44xx_pwrdm = {
 	.pwrsts_mem_on	= {
 		[0] = PWRSTS_ON,	/* l3init_bank1 */
 	},
-	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE | PWRDM_HAS_HDWR_SAR,
 };
 
 /* l4per_44xx_pwrdm: Target peripherals power domain */
-- 
1.7.4.1