[PATCH 15/22] ARM: ux500: Add support for ab8500 regulators into the Device Tree

Lee Jones lee.jones at linaro.org
Wed May 30 00:47:33 EDT 2012


Here we supply the information required to setup regulators successfully
on Snowball and other db8500 variants which use the ab8500 regulators.

Acked-by: Linus Walleij <linus.walleij at linaro.org>
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 arch/arm/boot/dts/db8500.dtsi  |   68 ++++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/snowball.dts |    2 ++
 2 files changed, 70 insertions(+)

diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi
index 646c80b..1fa5546 100644
--- a/arch/arm/boot/dts/db8500.dtsi
+++ b/arch/arm/boot/dts/db8500.dtsi
@@ -308,6 +308,74 @@
 				compatible = "stericsson,ab8500";
 				reg = <5>; /* mailbox 5 is i2c */
 				interrupts = <0 40 0x4>;
+
+				ab8500-regulators {
+					compatible = "stericsson,ab8500-regulator";
+
+					// supplies to the display/camera
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-name = "V-DISPLAY";
+						regulator-min-microvolt = <2500000>;
+						regulator-max-microvolt = <2900000>;
+						regulator-boot-on;
+						/* BUG: If turned off MMC will be affected. */
+						regulator-always-on;
+					};
+
+					// supplies to the on-board eMMC
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-name = "V-eMMC1";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					// supply for VAUX3; SDcard slots
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-name = "V-MMC-SD";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					// supply for v-intcore12; VINTCORE12 LDO
+					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+						regulator-name = "V-INTCORE";
+					};
+
+					// supply for tvout; gpadc; TVOUT LDO
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-name = "V-TVOUT";
+					};
+
+					// supply for ab8500-usb; USB LDO
+					ab8500_ldo_usb_reg: ab8500_ldo_usb {
+						regulator-name = "dummy";
+					};
+
+					// supply for ab8500-vaudio; VAUDIO LDO
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-name = "V-AUD";
+					};
+
+					// supply for v-anamic1 VAMic1-LDO
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-name = "V-AMIC1";
+					};
+
+					// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
+					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+						regulator-name = "V-AMIC2";
+					};
+
+					// supply for v-dmic; VDMIC LDO
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-name = "V-DMIC";
+					};
+
+					// supply for U8500 CSI/DSI; VANA LDO
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-name = "V-CSI/DSI";
+					};
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index d6c05ea..ec3c339 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -103,11 +103,13 @@
 
 		sdi at 80126000 {
 			status = "enabled";
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 			cd-gpios  = <&gpio6 26 0x4>; // 218
 		};
 
 		sdi at 80114000 {
 			status = "enabled";
+			vmmc-supply = <&ab8500_ldo_aux2_reg>;
 		};
 
 		uart at 80120000 {
-- 
1.7.9.5




More information about the linux-arm-kernel mailing list