[PATCH 1/2] ARM: imx6q-sabrelite.dts: Add SPI NOR support

[Shawn Guo]

On Tue, Apr 24, 2012 at 08:35:36PM -0300, Fabio Estevam wrote:
> mx6qsabrelite has a sst25vf016b SPI NOR flash connected to eCSPI1.
> 
> Add support for it.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>

Applied on my imx/dt branch, thanks.

Regards,
Shawn

> ---
>  arch/arm/boot/dts/imx6q-sabrelite.dts |   17 +++++++++++++++++
>  1 files changed, 17 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
> index 4663a4e..35be687 100644
> --- a/arch/arm/boot/dts/imx6q-sabrelite.dts
> +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
> @@ -22,6 +22,23 @@
>  	};
>  
>  	soc {
> +		aips-bus at 02000000 { /* AIPS1 */
> +			spba-bus at 02000000 {
> +				ecspi at 02008000 { /* eCSPI1 */
> +					fsl,spi-num-chipselects = <1>;
> +					cs-gpios = <&gpio3 19 0>;
> +					status = "okay";
> +
> +					flash: m25p80 at 0 {
> +						compatible = "sst,sst25vf016b";
> +						spi-max-frequency = <20000000>;
> +						reg = <0>;
> +					};
> +				};
> +			};
> +
> +		};
> +
>  		aips-bus at 02100000 { /* AIPS2 */
>  			enet at 02188000 {
>  				phy-mode = "rgmii";
> -- 
> 1.7.1