May 2013 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed May 1 00:42:08 EDT 2013
Ending: Fri May 31 23:59:29 EDT 2013
Messages: 6152

• [PATCH] clk: Fix race condition between clk_set_parent and clk_enable()   Saravana Kannan
  • [PATCH] clk: Fix race condition between clk_set_parent and clk_enable()   Mike Turquette
    • [PATCH] clk: Fix race condition between clk_set_parent and clk_enable()   Saravana Kannan
    • [PATCH] clk: Fix race condition between clk_set_parent and clk_enable()   Tomasz Figa
      • [PATCH] clk: Fix race condition between clk_set_parent and clk_enable()   Saravana Kannan
      • [PATCH] clk: Fix race condition between clk_set_parent and clk_enable()   Tomasz Figa
  • [PATCH] clk: Fix race condition between clk_set_parent and clk_enable()   Ulf Hansson
    • [PATCH] clk: Fix race condition between clk_set_parent and clk_enable()   Saravana Kannan
  • [PATCH v2] clk: Fix race condition between clk_set_parent and clk_enable()   Saravana Kannan
    • [PATCH v2] clk: Fix race condition between clk_set_parent and clk_enable()   Mike Turquette
      • [PATCH v2] clk: Fix race condition between clk_set_parent and clk_enable()   Saravana Kannan
      • [PATCH v2] clk: Fix race condition between clk_set_parent and clk_enable()   Mike Turquette
• [PATCH 0/2] Early printk support for virtio console devices.   Anup Patel
  • [PATCH 0/2] Early printk support for virtio console devices.   Anup Patel
    • [PATCH 0/2] Early printk support for virtio console devices.   Will Deacon
  • [PATCH 0/2] Early printk support for virtio console devices.   Peter Maydell
    • [PATCH 0/2] Early printk support for virtio console devices.   Rusty Russell
      • [PATCH 0/2] Early printk support for virtio console devices.   Peter Maydell
      • [PATCH 0/2] Early printk support for virtio console devices.   Rusty Russell
      • [PATCH 0/2] Early printk support for virtio console devices.   Peter Maydell
      • [PATCH 0/2] Early printk support for virtio console devices.   Christopher Covington
      • [PATCH 0/2] Early printk support for virtio console devices.   Peter Maydell
      • [PATCH 0/2] Early printk support for virtio console devices.   Catalin Marinas
      • [PATCH 0/2] Early printk support for virtio console devices.   Grant Likely
      • [PATCH 0/2] Early printk support for virtio console devices.   Pranavkumar Sawargaonkar
• linux-next: manual merge of the arm-soc tree with the arm tree   Stephen Rothwell
• [PATCH 1/7] tty: xuartps: Sort #includes alphabetically   Michal Simek
  • [PATCH 1/7] tty: xuartps: Sort #includes alphabetically   Greg Kroah-Hartman
  • [PATCH 1/7] tty: xuartps: Sort #includes alphabetically   Sören Brinkmann
• [Question] flush_dcache_page() need to flush icache?   Ming Lei
  • [Question] flush_dcache_page() need to flush icache?   Catalin Marinas
    • [Question] flush_dcache_page() need to flush icache?   Ming Lei
• [PATCH v3 4/5] ARM: shmobile: BOCK-W: add VIN and ML86V7667 support   Simon Horman
  • [PATCH v3 4/5] ARM: shmobile: BOCK-W: add VIN and ML86V7667 support   Sergei Shtylyov
    • [PATCH v3 4/5] ARM: shmobile: BOCK-W: add VIN and ML86V7667 support   Simon Horman
• [PATCH 6/4] arm64: Move to generic sched_clock infrastructure   Catalin Marinas
  • [PATCH 6/4] arm64: Move to generic sched_clock infrastructure   Christopher Covington
• [PATCH 1/5] dmaengine: ste_dma40: Allow memcpy channels to be configured from DT   Lee Jones
• [PATCH 1/5 v2] dmaengine: ste_dma40: Allow memcpy channels to be configured from DT   Lee Jones
  • [PATCH 1/5 v2] dmaengine: ste_dma40: Allow memcpy channels to be configured from DT   Arnd Bergmann
  • [PATCH 1/5 v2] dmaengine: ste_dma40: Allow memcpy channels to be configured from DT   Linus Walleij
    • [PATCH 1/5 v2] dmaengine: ste_dma40: Allow memcpy channels to be configured from DT   Lee Jones
      • [PATCH 1/5 v2] dmaengine: ste_dma40: Allow memcpy channels to be configured from DT   Linus Walleij
      • [PATCH 1/5 v2] dmaengine: ste_dma40: Allow memcpy channels to be configured from DT   Lee Jones
      • [PATCH 1/5 v2] dmaengine: ste_dma40: Allow memcpy channels to be configured from DT   Linus Walleij
• [PATCH 5/5 v2] dmaengine: ste_dma40: Fetch disabled channels from DT   Lee Jones
  • [PATCH 5/5 v2] dmaengine: ste_dma40: Fetch disabled channels from DT   Arnd Bergmann
• [Linaro-mm-sig] RFC: Unified DMA allocation algorithms   Daniel Vetter
• [alsa-devel] [PATCH] MAINTAINERS: Add linux-samsung-soc list to all related entries   Sylwester Nawrocki
• [PATCH] ARM: bcm281xx: Add L2 support for Rev A2 chips   Will Deacon
  • [PATCH] ARM: bcm281xx: Add L2 support for Rev A2 chips   Christian Daudt
• [PATCH 1/3] ARM: dts: Add aliases for i.MX27 SPI controller   Alexander Shiyan
  • [PATCH 3/3] ARM: dts: Add MC13783 support for i.MX27 Phytec PCM038 module   Alexander Shiyan
    • [PATCH 3/3] ARM: dts: Add MC13783 support for i.MX27 Phytec PCM038 module   Sascha Hauer
      • Re[2]: [PATCH 3/3] ARM: dts: Add MC13783 support for i.MX27 Phytec PCM038 module   Alexander Shiyan
      • [PATCH 3/3] ARM: dts: Add MC13783 support for i.MX27 Phytec PCM038 module   Sascha Hauer
      • Re[2]: [PATCH 3/3] ARM: dts: Add MC13783 support for i.MX27 Phytec PCM038 module   Alexander Shiyan
      • Re[3]: [PATCH 3/3] ARM: dts: Add MC13783 support for i.MX27 Phytec PCM038 module   Alexander Shiyan
  • [PATCH 1/3] ARM: dts: Add aliases for i.MX27 SPI controller   Shawn Guo
• [PATCH 2/3] ARM: dts: Add SPI support for i.MX27 Phytec PCM038 module   Alexander Shiyan
• [RFC PATCH 5/9] ARM64: mm: Add support for flushing huge pages.   Will Deacon
  • [RFC PATCH 5/9] ARM64: mm: Add support for flushing huge pages.   Catalin Marinas
• [RFC PATCH 7/9] ARM64: mm: HugeTLB support.   Will Deacon
  • [RFC PATCH 7/9] ARM64: mm: HugeTLB support.   Steve Capper
  • [RFC PATCH 7/9] ARM64: mm: HugeTLB support.   Catalin Marinas
• [PATCH] ARM: smp: call platform's cpu_die in ipi_cpu_stop   Rob Herring
  • [PATCH] ARM: smp: call platform's cpu_die in ipi_cpu_stop   Russell King - ARM Linux
    • [PATCH 10/21] [SCSI] nsp32: use mdelay instead of large udelay constants   James Bottomley
• [RFC PATCH 9/9] ARM64: mm: THP support.   Steve Capper
• [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Catalin Marinas
  • [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Simon Baatz
    • [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Catalin Marinas
      • [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Simon Baatz
      • [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Catalin Marinas
      • [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Ming Lei
      • [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Catalin Marinas
      • [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Russell King - ARM Linux
      • [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Simon Baatz
      • [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Catalin Marinas
      • [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Ming Lei
      • [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Simon Baatz
      • [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Ming Lei
      • [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Simon Baatz
      • [PATCH V3 2/2] ARM: Handle user space mapped pages in flush_kernel_dcache_page   Catalin Marinas
• [PATCH] dmaengine: ste_dma40: Rectify incorrect configuration validation checking   Lee Jones
• [PATCH 08/32 v2] dmaengine: ste_dma40: Remove home-brew MAX() macro   Lee Jones
• [PATCH 12/32] ARM: ux500: Remove superfluous 'psize' attribute from Audio platform data   Lee Jones
  • [PATCH 12/32] ARM: ux500: Remove superfluous 'psize' attribute from Audio platform data   Lee Jones
    • [PATCH 12/32] ARM: ux500: Remove superfluous 'psize' attribute from Audio platform data   Linus Walleij
• RFC: Unified DMA allocation algorithms   Will Deacon
• [RFT][PATCH 1/2] clk: wm831x: Fix update wrong register for enable/disable FLL   Axel Lin
  • [RFT][PATCH 2/2] clk: wm831x: Fix wm831x_clkout_get_parent   Axel Lin
  • [RFT][PATCH 1/2] clk: wm831x: Fix update wrong register for enable/disable FLL   Mark Brown
  • [RFT][PATCH 1/2] clk: wm831x: Fix update wrong register for enable/disable FLL   Mike Turquette
• [PATCH v3] ARM: imx: replicate the diagnostic register of boot cpu into secondary cores   Dirk Behme
  • [PATCH v3] ARM: imx: replicate the diagnostic register of boot cpu into secondary cores   Will Deacon
    • [PATCH v3] ARM: imx: replicate the diagnostic register of boot cpu into secondary cores   Dirk Behme
      • [PATCH v3] ARM: imx: replicate the diagnostic register of boot cpu into secondary cores   Will Deacon
      • [PATCH v3] ARM: imx: replicate the diagnostic register of boot cpu into secondary cores   Shawn Guo
      • [PATCH v3] ARM: imx: replicate the diagnostic register of boot cpu into secondary cores   Dirk Behme
• [PATCH 03/21] ARM: shmobile: don't call irqchip_init unconditionally   Rob Herring
  • [PATCH 03/21] ARM: shmobile: don't call irqchip_init unconditionally   Simon Horman
    • [PATCH 03/21] ARM: shmobile: don't call irqchip_init unconditionally   Arnd Bergmann
      • [PATCH 03/21] ARM: shmobile: don't call irqchip_init unconditionally   Bastian Hecht
      • [PATCH 03/21] ARM: shmobile: don't call irqchip_init unconditionally   Arnd Bergmann
      • [PATCH 03/21] ARM: shmobile: don't call irqchip_init unconditionally   Simon Horman
      • [PATCH 03/21] ARM: shmobile: don't call irqchip_init unconditionally   Simon Horman
• [PATCH] dmaengine: ste_dma40: Only use addresses passed as configuration information   Lee Jones
• [PATCH] dmaengine: ste_dma40: Remove redundant address fetching function   Lee Jones
• [RFC PATCH v2] ARM CCI support   Lorenzo Pieralisi
  • [RFC PATCH v2] drivers: bus: add ARM CCI support   Lorenzo Pieralisi
    • [RFC PATCH v2] drivers: bus: add ARM CCI support   Javi Merino
      • [RFC PATCH v2] drivers: bus: add ARM CCI support   Lorenzo Pieralisi
    • [RFC PATCH v2] drivers: bus: add ARM CCI support   Nicolas Pitre
      • [RFC PATCH v2] drivers: bus: add ARM CCI support   Lorenzo Pieralisi
      • [RFC PATCH v2] drivers: bus: add ARM CCI support   Nicolas Pitre
• [PATCH] ARM: KVM: Don't handle PSCI calls via SMC   Dave P Martin
  • [PATCH] ARM: KVM: Don't handle PSCI calls via SMC   Christoffer Dall
    • [PATCH] ARM: KVM: Don't handle PSCI calls via SMC   Dave Martin
• [PATCH] ARM: nommu: Fix types for ioremap functions   Laura Abbott
• [PATCH] ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices   Aaro Koskinen
  • [PATCH] ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices   Tony Lindgren
• [PATCH] ARM: imx: Change type of ioremap function   Laura Abbott
  • [PATCH] ARM: imx: Change type of ioremap function   Shawn Guo
• [PATCH -v7 0/11] Shutdown from reboot_cpuid without stopping other cpus.   Robin Holt
  • [PATCH -v7 02/11] Migrate shutdown/reboot to boot cpu.   Robin Holt
  • [PATCH -v7 04/11] Move shutdown/reboot related functions to kernel/reboot.c   Robin Holt
  • [PATCH -v7 10/11] arm, change reboot_mode to use enum reboot_mode   Robin Holt
    • [PATCH -v7 10/11] arm, change reboot_mode to use enum reboot_mode   Ingo Molnar
      • [PATCH -v7 10/11] arm, change reboot_mode to use enum reboot_mode   Robin Holt
  • [PATCH -v7 11/11] Move arch/x86 reboot= handling to generic kernel.   Robin Holt
    • [PATCH -v7 11/11] Move arch/x86 reboot= handling to generic kernel.   Ingo Molnar
  • [PATCH -v7 0/11] Shutdown from reboot_cpuid without stopping other cpus.   Russell King - ARM Linux
    • [PATCH -v7 0/11] Shutdown from reboot_cpuid without stopping other cpus.   Robin Holt
    • [PATCH -v7 0/11] Shutdown from reboot_cpuid without stopping other cpus.   Robin Holt
      • [PATCH -v7 0/11] Shutdown from reboot_cpuid without stopping other cpus.   Russell King - ARM Linux
      • [PATCH -v7 0/11] Shutdown from reboot_cpuid without stopping other cpus.   Robin Holt
• [PATCH -v7 01/11] CPU hotplug: Provide a generic helper to disable/enable CPU hotplug   Robin Holt
• [PATCH -v7 03/11] Remove -stable friendly PF_THREAD_BOUND define   Robin Holt
• [PATCH -v7 05/11] checkpatch.pl the new kernel/reboot.c file.   Robin Holt
• [PATCH -v7 06/11] x86, prepare reboot_mode for moving to generic kernel code.   Robin Holt
• [PATCH -v7 07/11] unicore32, prepare reboot_mode for moving to generic kernel code.   Robin Holt
• [PATCH -v7 08/11] arm, Remove unused restart_mode fields from some arm subarchs   Robin Holt
  • [PATCH -v7 08/11] arm, Remove unused restart_mode fields from some arm subarchs   Russell King - ARM Linux
• [PATCH -v7 09/11] arm, prepare reboot_mode for moving to generic kernel code.   Robin Holt
• [PATCHv4 0/3] Add support for velocity network driver on platform devices   David Miller
  • [PATCHv4 0/3] Add support for velocity network driver on platform devices   Tony Prisk
• [RFC 0/2] am33xx 0.950V core sleep mode   Russ Dill
  • [RFC 1/2] ARM: OMAP2+: AM33XX: I2C Sleep/wake sequence support   Tony Lindgren
    • [RFC 1/2] ARM: OMAP2+: AM33XX: I2C Sleep/wake sequence support   Russ Dill
      • [RFC 1/2] ARM: OMAP2+: AM33XX: I2C Sleep/wake sequence support   Tony Lindgren
• [PATCH 0/3] xen/arm: account for stolen ticks   Stefano Stabellini
  • [PATCH 1/3] arm_arch_timer: introduce arch_timer_stolen_ticks   Stefano Stabellini
    • [PATCH 1/3] arm_arch_timer: introduce arch_timer_stolen_ticks   Christopher Covington
      • [Xen-devel] [PATCH 1/3] arm_arch_timer: introduce arch_timer_stolen_ticks   Ian Campbell
      • [Xen-devel] [PATCH 1/3] arm_arch_timer: introduce arch_timer_stolen_ticks   Christopher Covington
      • [Xen-devel] [PATCH 1/3] arm_arch_timer: introduce arch_timer_stolen_ticks   Stefano Stabellini
      • [Xen-devel] [PATCH 1/3] arm_arch_timer: introduce arch_timer_stolen_ticks   Marc Zyngier
      • [Xen-devel] [PATCH 1/3] arm_arch_timer: introduce arch_timer_stolen_ticks   Stefano Stabellini
      • [Xen-devel] [PATCH 1/3] arm_arch_timer: introduce arch_timer_stolen_ticks   Christopher Covington
      • [Xen-devel] [PATCH 1/3] arm_arch_timer: introduce arch_timer_stolen_ticks   Konrad Rzeszutek Wilk
      • [Xen-devel] [PATCH 1/3] arm_arch_timer: introduce arch_timer_stolen_ticks   Christopher Covington
      • [Xen-devel] [PATCH 1/3] arm_arch_timer: introduce arch_timer_stolen_ticks   Stefano Stabellini
      • [Xen-devel] [PATCH 1/3] arm_arch_timer: introduce arch_timer_stolen_ticks   Christopher Covington
  • [PATCH 2/3] xen: move do_stolen_accounting to drivers/xen/time.c   Stefano Stabellini
    • [Xen-devel] [PATCH 2/3] xen: move do_stolen_accounting to drivers/xen/time.c   Ian Campbell
    • [PATCH 2/3] xen: move do_stolen_accounting to drivers/xen/time.c   Christopher Covington
      • [Xen-devel] [PATCH 2/3] xen: move do_stolen_accounting to drivers/xen/time.c   Ian Campbell
      • [Xen-devel] [PATCH 2/3] xen: move do_stolen_accounting to drivers/xen/time.c   Stefano Stabellini
  • [PATCH 3/3] xen/arm: account for stolen ticks   Stefano Stabellini
    • [Xen-devel] [PATCH 3/3] xen/arm: account for stolen ticks   Ian Campbell
      • [Xen-devel] [PATCH 3/3] xen/arm: account for stolen ticks   Stefano Stabellini
      • [Xen-devel] [PATCH 3/3] xen/arm: account for stolen ticks   Ian Campbell
      • [Xen-devel] [PATCH 3/3] xen/arm: account for stolen ticks   Stefano Stabellini
      • [Xen-devel] [PATCH 3/3] xen/arm: account for stolen ticks   Ian Campbell
      • [Xen-devel] [PATCH 3/3] xen/arm: account for stolen ticks   Stefano Stabellini
• Kernel panic on boot in tick_do_broadcast   Alex Thorlton
• Pinmuxing with devicetree (beaglebone)   Tim Sander
• [PATCH] ARM: Adds pin config API to set all configs in one function   Sherman Yin
  • [PATCH] ARM: Adds pin config API to set all configs in one function   Linus Walleij
• [PATCH v6 01/16] spi/spi-atmel: fix probing failure after xfer->speed_hz set   Yang, Wenyou
  • [PATCH v6 01/16] spi/spi-atmel: fix probing failure after xfer->speed_hz set   Richard Genoud
    • [PATCH v6 01/16] spi/spi-atmel: fix probing failure after xfer->speed_hz set   Nicolas Ferre
      • [PATCH v6 01/16] spi/spi-atmel: fix probing failure after xfer->speed_hz set   Mark Brown
      • [PATCH v6 01/16] spi/spi-atmel: fix probing failure after xfer->speed_hz set   Yang, Wenyou
      • [PATCH v6 01/16] spi/spi-atmel: fix probing failure after xfer->speed_hz set   Nicolas Ferre
• [PATCH] mxs: icoll: Add function to register an interrupt as FIQ source   Shawn Guo
  • [PATCH] mxs: icoll: Add function to register an interrupt as FIQ source   Maxime Ripard
• [PATCH] gpio: mxs: Use set and clear capabilities of the gpio controller   Shawn Guo
  • [PATCH] gpio: mxs: Use set and clear capabilities of the gpio controller   Maxime Ripard
  • [PATCH] gpio: mxs: Use set and clear capabilities of the gpio controller   Linus Walleij
• [PATCH 8/9] s3c2410fb: Remove redundant platform_set_drvdata()   Jingoo Han
  • [PATCH 8/9] s3c2410fb: Remove redundant platform_set_drvdata()   Sylwester Nawrocki
• [PATCH] ARM: imx: compile fix for hotplug.c   Shawn Guo
  • [PATCH] ARM: imx: compile fix for hotplug.c   Arnd Bergmann
  • [PATCH] ARM: imx: compile fix for hotplug.c   Uwe Kleine-König
    • [PATCH] ARM: imx: compile fix for hotplug.c   Shawn Guo
• Latest build results - errors/warnings - lots of them   Shawn Guo
  • Latest build results - errors/warnings - lots of them   Russell King - ARM Linux
    • Latest build results - errors/warnings - lots of them   Tony Lindgren
      • Latest build results - errors/warnings - lots of them   Eduardo Valentin
      • Latest build results - errors/warnings - lots of them   Arnd Bergmann
      • Latest build results - errors/warnings - lots of them   Eduardo Valentin
      • Latest build results - errors/warnings - lots of them   Felipe Balbi
      • Latest build results - errors/warnings - lots of them   Eduardo Valentin
      • Latest build results - errors/warnings - lots of them   Russell King - ARM Linux
      • Latest build results - errors/warnings - lots of them   NeilBrown
      • Latest build results - errors/warnings - lots of them   Tony Lindgren
  • Latest build results - errors/warnings - lots of them   Russell King - ARM Linux
    • Latest build results - errors/warnings - lots of them   Russell King - ARM Linux
      • Latest build results - errors/warnings - lots of them   Dave Martin
• [Patch 0/3] Fix to clk framework while handling orphan clks   Ambresh K
  • [Patch 1/3] clk: fix clk_mux_get_parent return's signed value   Ambresh K
    • [Patch 1/3] clk: fix clk_mux_get_parent return's signed value   Mike Turquette
  • [Patch 2/3] clk: skip re-parenting orphan clk   Ambresh K
    • [Patch 2/3] clk: skip re-parenting orphan clk   skannan at codeaurora.org
  • [Patch 3/3] clk: Avoid re-parenting orphan clk's having invalid parent index.   Ambresh K
    • [Patch 3/3] clk: Avoid re-parenting orphan clk's having invalid parent index.   Mike Turquette
• [GIT PULL 0/5] ARM: First batch of arm-soc branches for 3.10   Olof Johansson
  • [GIT PULL 1/5] ARM: arm-soc non-critical fixes for 3.10   Olof Johansson
  • [GIT PULL 2/5] ARM: arm-soc cleanup for 3.10   Olof Johansson
  • [GIT PULL 3/5] ARM: arm-soc device-tree updates for 3.10, part 1   Olof Johansson
  • [GIT PULL 4/5] ARM: arm-soc platform updates for 3.10, part 1   Olof Johansson
  • [GIT PULL 5/5] ARM: arm-soc multiplatform updates for 3.10   Olof Johansson
• [PATCH V2 0/2] ARM/MVF600: add Freescale Vybrid Family platform and development board support This Vybird MVF600 family is a heterogeneous dual-core eMPU family combining the ARM Cortex-A5 and Corte-M4 cores. This SOC still shares some IPs with Iscale Vybrid Family SOC and Vybrid Tower development board.   Jingchang Lu
  • [PATCH V2 1/2] ARM/MVF600: add Vybrid Family platform support   Jingchang Lu
    • [PATCH V2 1/2] ARM/MVF600: add Vybrid Family platform support   Sascha Hauer
      • [PATCH V2 1/2] ARM/MVF600: add Vybrid Family platform support   Lu Jingchang-B35083
    • [PATCH V2 1/2] ARM/MVF600: add Vybrid Family platform support   Mike Turquette
    • [PATCH V2 1/2] ARM/MVF600: add Vybrid Family platform support   Shawn Guo
      • [PATCH V2 1/2] ARM/MVF600: add Vybrid Family platform support   Lu Jingchang-B35083
      • [PATCH V2 1/2] ARM/MVF600: add Vybrid Family platform support   Shawn Guo
    • [PATCH V2 1/2] ARM/MVF600: add Vybrid Family platform support   Russell King - ARM Linux
  • [PATCH V2 2/2] ARM/DTS/MVF600: add basic device tree source for Vybrid   Jingchang Lu
    • [PATCH V2 2/2] ARM/DTS/MVF600: add basic device tree source for Vybrid   Sascha Hauer
    • [PATCH V2 2/2] ARM/DTS/MVF600: add basic device tree source for Vybrid   Shawn Guo
  • [PATCH V2 0/2] ARM/MVF600: add Freescale Vybrid Family platform and development board support This Vybird MVF600 family is a heterogeneous dual-core eMPU family combining the ARM Cortex-A5 and Corte-M4 cores. This SOC still shares some IPs with Iscale Vybrid Family SOC and Vybrid Tower development board.   Shawn Guo
• [PATCH V2] tty/serial/mvf: add MVF uart driver support   Jingchang Lu
  • [PATCH V2] tty/serial/mvf: add MVF uart driver support   Shawn Guo
• [PATCH V2 1/2] pinctrl/mvf: add MVF pinctrl driver   Jingchang Lu
  • [PATCH 2/2] pinctrl/imx: add zero register offset valid for Vybrid platform   Jingchang Lu
    • [PATCH 2/2] pinctrl/imx: add zero register offset valid for Vybrid platform   Sascha Hauer
      • [PATCH 2/2] pinctrl/imx: add zero register offset valid for Vybrid platform   Shawn Guo
  • [PATCH V2 1/2] pinctrl/mvf: add MVF pinctrl driver   Shawn Guo
• [v3, 3/3] ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm   Gupta, Pekon
  • [v3, 3/3] ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm   Hiremath, Vaibhav
• [PATCH] ARM: ux500: Remove DMA address look-up table   Lee Jones
  • [PATCH] ARM: ux500: Remove DMA address look-up table   Linus Walleij
    • [PATCH] ARM: ux500: Remove DMA address look-up table   Lee Jones
• [PATCH] dmaengine: ste_dma40: Correct copy/paste error   Lee Jones
• [PATCH] ARM: ux500: Remove unnecessary attributes from DMA channel request pdata   Lee Jones
• [PATCH 18/23 v2] dma: coh901318: add devicetree support   Linus Walleij
• [PATCH] ARM: u300: augment device tree with DMA channels   Linus Walleij
• [RFC PATCH v4 00/14] sched: packing small tasks   Vincent Guittot
• [PATCH 20/23 v2] ARM: u300: add SPI PL022 to the device tree   Linus Walleij
  • [PATCH 20/23 v2] ARM: u300: add SPI PL022 to the device tree   Arnd Bergmann
    • [PATCH 20/23 v2] ARM: u300: add SPI PL022 to the device tree   Linus Walleij
• [PATCH v3,1/3] ARM: dts: AM33XX: Add ELM node   Gupta, Pekon
• [PATCH v3,2/3] ARM: dts: AM33XX: Add GPMC node   Gupta, Pekon
  • [PATCH v3,2/3] ARM: dts: AM33XX: Add GPMC node   Tony Lindgren
• [PATCH v3, 3/3] ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm   Gupta, Pekon
• [RFC PATCH 8/9] ARM64: mm: Introduce MAX_ZONE_ORDER for 64K and THP.   Catalin Marinas
  • [RFC PATCH 8/9] ARM64: mm: Introduce MAX_ZONE_ORDER for 64K and THP.   Steve Capper
• [GIT PULL] Removal of GENERIC_GPIO   Alex Courbot
  • [GIT PULL] Removal of GENERIC_GPIO   Stephen Rothwell
    • [GIT PULL] Removal of GENERIC_GPIO   Stephen Rothwell
      • [GIT PULL] Removal of GENERIC_GPIO   Grant Likely
• [PATCH 0/5] Add I2C support for Allwinner SoCs   Maxime Ripard
  • [PATCH 1/5] i2c: sunxi: Add Allwinner A1X i2c driver   Maxime Ripard
  • [PATCH 2/5] ARM: sunxi: dt: Add i2c controller nodes to the DTSI   Maxime Ripard
  • [PATCH 3/5] ARM: sun4i: dt: Add i2c muxing options   Maxime Ripard
  • [PATCH 5/5] ARM: sun5i: olinuxino: Enable the i2c controllers   Maxime Ripard
• [PATCH 4/5] ARM: sun5i: dt: Add i2c muxing options   Maxime Ripard
• [PATCH 0/8] crypto: Fix clocks and DMA configuration   Lee Jones
  • [PATCH 1/8] crypto: ux500/hash - Prepare clock before enabling it   Lee Jones
    • [PATCH 1/8] crypto: ux500/hash - Prepare clock before enabling it   Ulf Hansson
  • [PATCH 2/8] crypto: ux500/hash - Set DMA configuration though dma_slave_config()   Lee Jones
  • [PATCH 3/8] ARM: ux500: Stop passing Hash DMA channel config information though pdata   Lee Jones
  • [PATCH 4/8] crypto: ux500/cryp - Prepare clock before enabling it   Lee Jones
    • [PATCH 4/8] crypto: ux500/cryp - Prepare clock before enabling it   Ulf Hansson
  • [PATCH 5/8] crypto: ux500/cryp - Set DMA configuration though dma_slave_config()   Lee Jones
  • [PATCH 6/8] ARM: ux500: Stop passing Cryp DMA channel config information though pdata   Lee Jones
  • [PATCH 7/8] crypto: ux500/[cryp|hash] - Show successful start-up in the bootlog   Lee Jones
  • [PATCH 8/8] ARM: ux500: Register Cyrp and Hash platform drivers on Snowball   Lee Jones
• [PATCH 09/10] ARM: ux500: Remove ux500-musb platform registation when booting with DT   Lee Jones
• [PATCH 10/10] ARM: ux500: Remove empty function u8500_of_init_devices()   Lee Jones
• [PATCH 0/6] dmaengine: Refactor the DMA40 driver - continued   Lee Jones
• [PATCH v3 16/32] arm64: KVM: hypervisor initialization code   Catalin Marinas
  • [PATCH v3 16/32] arm64: KVM: hypervisor initialization code   Marc Zyngier
• [PATCH] BUG: fix atmel spi doesn' support 16 bits transfers using PIO   Wenyou Yang
  • [PATCH] spi/spi-atmel: BUG: fix doesn' support 16 bits transfers using PIO   Wenyou Yang
    • [PATCH] spi/spi-atmel: BUG: fix doesn' support 16 bits transfers using PIO   Mark Brown
• [PATCH 3/5] ARM: ux500: Stop passing DMA platform data though AUXDATA   Srinidhi Kasagar
• [PATCH] Move the EM_AARCH64 definition to uapi/linux/elf-em.txt   Dan Aloni
• [PATCH] Move the EM_AARCH64 definition to uapi/linux/elf-em.h   Dan Aloni
  • [PATCH] Move the EM_AARCH64 definition to uapi/linux/elf-em.h   Catalin Marinas
    • [PATCH] Move the EM_ARM and EM_AARCH64 definitions to uapi/linux/elf-em.h   Dan Aloni
• [PATCH 0/5] various ab8500 fixes   Linus Walleij
  • [PATCH 0/5] various ab8500 fixes   Lee Jones
• [PATCH] ARM: sun4i: cubieboard: Enable the i2c controllers   Emilio López
  • [PATCH] ARM: sun4i: cubieboard: Enable the i2c controllers   Arnd Bergmann
    • [PATCH] ARM: sun4i: cubieboard: Enable the i2c controllers   Emilio López
      • [PATCH] ARM: sun4i: cubieboard: Enable the i2c controllers   Arnd Bergmann
  • [PATCH] ARM: sun4i: cubieboard: Enable the i2c controllers   Maxime Ripard
• [PATCH 03/23 v2] ARM: u300: device tree support for the timer   Linus Walleij
• [PATCH v3 19/32] arm64: KVM: Plug the VGIC   Catalin Marinas
• [PATCH v2 0/5] ARM: KVM: various mmu related fixes for 3.10   Marc Zyngier
  • [PATCH v2 1/5] ARM: KVM: be more thorough when invalidating TLBs   Marc Zyngier
    • [PATCH v2 1/5] ARM: KVM: be more thorough when invalidating TLBs   Catalin Marinas
      • [PATCH v2 1/5] ARM: KVM: be more thorough when invalidating TLBs   Marc Zyngier
  • [PATCH v2 4/5] ARM: KVM: get rid of S2_PGD_SIZE   Marc Zyngier
• [PATCH v2 2/5] ARM: KVM: remove dead prototype for __kvm_tlb_flush_vmid   Marc Zyngier
• [PATCH v2 3/5] ARM: KVM: relax cache maintainance when building page tables   Marc Zyngier
  • [PATCH v2 3/5] ARM: KVM: relax cache maintainance when building page tables   Catalin Marinas
  • [PATCH v2 3/5] ARM: KVM: relax cache maintainance when building page tables   Will Deacon
    • [PATCH v2 3/5] ARM: KVM: relax cache maintainance when building page tables   Christoffer Dall
      • [PATCH v2 3/5] ARM: KVM: relax cache maintainance when building page tables   Will Deacon
      • [PATCH v2 3/5] ARM: KVM: relax cache maintainance when building page tables   Christoffer Dall
      • [PATCH v2 3/5] ARM: KVM: relax cache maintainance when building page tables   Will Deacon
      • [PATCH v2 3/5] ARM: KVM: relax cache maintainance when building page tables   Christoffer Dall
• [PATCH v2 5/5] ARM: KVM: use phys_addr_t instead of unsigned long long for HYP PGDs   Marc Zyngier
• [PATCH, RFC 00/22] ARM randconfig bugs   Arnd Bergmann
  • [PATCH, RFC 11/22] iwlegacy: il_pm_ops is only provided for PM_SLEEP   Arnd Bergmann
    • [PATCH, RFC 11/22] iwlegacy: il_pm_ops is only provided for PM_SLEEP   Borislav Petkov
  • [PATCH, RFC 14/22] oprofile: always enable IRQ_WORK   Arnd Bergmann
    • [PATCH, RFC 14/22] oprofile: always enable IRQ_WORK   Robert Richter
      • [PATCH, RFC 14/22] oprofile: always enable IRQ_WORK   Steven Rostedt
      • [PATCH, RFC 14/22] oprofile: always enable IRQ_WORK   Steven Rostedt
      • [PATCH, RFC 14/22] oprofile: always enable IRQ_WORK   Arnd Bergmann
  • [PATCH, RFC 17/22] USB: OHCI: clarify Kconfig dependencies   Arnd Bergmann
  • [PATCH, RFC 19/22] staging/solo6x10: depend on CONFIG_FONTS   Arnd Bergmann
    • [PATCH, RFC 19/22] staging/solo6x10: depend on CONFIG_FONTS   Geert Uytterhoeven
      • [PATCH, RFC 19/22] staging/solo6x10: depend on CONFIG_FONTS   Arnd Bergmann
  • [PATCH, RFC 00/22] ARM randconfig bugs   Rafael J. Wysocki
  • [PATCH, RFC 09/22] crypto: lz4: don't build on ARM   Chanho Min
    • [PATCH, RFC 09/22] crypto: lz4: don't build on ARM   Arnd Bergmann
• [PATCH, RFC 01/22] can: move CONFIG_HAVE_CAN_FLEXCAN out of CAN_DEV   Arnd Bergmann
  • [PATCH, RFC 01/22] can: move CONFIG_HAVE_CAN_FLEXCAN out of CAN_DEV   Marc Kleine-Budde
    • [PATCH, RFC 01/22] can: move CONFIG_HAVE_CAN_FLEXCAN out of CAN_DEV   Arnd Bergmann
      • [PATCH, RFC 01/22] can: move CONFIG_HAVE_CAN_FLEXCAN out of CAN_DEV   Marc Kleine-Budde
• [PATCH, RFC 02/22] cpufreq: ARM_DT_BL_CPUFREQ needs ARM_CPU_TOPOLOGY   Arnd Bergmann
  • [PATCH, RFC 02/22] cpufreq: ARM_DT_BL_CPUFREQ needs ARM_CPU_TOPOLOGY   Viresh Kumar
    • [PATCH, RFC 02/22] cpufreq: ARM_DT_BL_CPUFREQ needs ARM_CPU_TOPOLOGY   Rafael J. Wysocki
      • [PATCH, RFC 02/22] cpufreq: ARM_DT_BL_CPUFREQ needs ARM_CPU_TOPOLOGY   Viresh Kumar
      • [PATCH, RFC 02/22] cpufreq: ARM_DT_BL_CPUFREQ needs ARM_CPU_TOPOLOGY   Rafael J. Wysocki
  • [PATCH, RFC 02/22] cpufreq: ARM_DT_BL_CPUFREQ needs ARM_CPU_TOPOLOGY   Viresh Kumar
    • [PATCH, RFC 02/22] cpufreq: ARM_DT_BL_CPUFREQ needs ARM_CPU_TOPOLOGY   Rafael J. Wysocki
• [PATCH, RFC 03/22] cpuidle: calxeda: select ARM_CPU_SUSPEND   Arnd Bergmann
  • [PATCH, RFC 03/22] cpuidle: calxeda: select ARM_CPU_SUSPEND   Daniel Lezcano
  • [PATCH, RFC 03/22] cpuidle: calxeda: select ARM_CPU_SUSPEND   Rob Herring
• [PATCH, RFC 04/22] staging/drm: imx: add missing dependencies   Arnd Bergmann
  • [PATCH, RFC 04/22] staging/drm: imx: add missing dependencies   Shawn Guo
    • [PATCH, RFC 04/22] staging/drm: imx: add missing dependencies   Arnd Bergmann
      • [PATCH, RFC 04/22] staging/drm: imx: add missing dependencies   Shawn Guo
• [PATCH, RFC 05/22] drm: always provide debugfs function prototypes   Arnd Bergmann
• [PATCH, RFC 06/22] gpu/drm: host1x: add dependency on Tegra   Arnd Bergmann
  • [PATCH, RFC 06/22] gpu/drm: host1x: add dependency on Tegra   Thierry Reding
    • [PATCH, RFC 06/22] gpu/drm: host1x: add dependency on Tegra   Arnd Bergmann
• [PATCH, RFC 07/22] drm/tilcd: select BACKLIGHT_LCD_SUPPORT   Arnd Bergmann
• [PATCH, RFC 08/22] OMAPDSS: DPI needs DSI   Arnd Bergmann
  • [PATCH, RFC 08/22] OMAPDSS: DPI needs DSI   Tomi Valkeinen
    • [PATCH, RFC 08/22] OMAPDSS: DPI needs DSI   Arnd Bergmann
• [PATCH, RFC 09/22] crypto: lz4: don't build on ARM   Arnd Bergmann
• [PATCH, RFC 10/22] mfd: ab8500: debugfs code depends on gpadc   Arnd Bergmann
  • [PATCH, RFC 10/22] mfd: ab8500: debugfs code depends on gpadc   Lee Jones
    • [PATCH, RFC 10/22] mfd: ab8500: debugfs code depends on gpadc   Arnd Bergmann
• [PATCH, RFC 12/22] thermal: cpu_cooling: fix stub function   Arnd Bergmann
  • [PATCH, RFC 12/22] thermal: cpu_cooling: fix stub function   Eduardo Valentin
    • [PATCH v2] thermal: cpu_cooling: fix stub function   Arnd Bergmann
      • [PATCH v2] thermal: cpu_cooling: fix stub function   Eduardo Valentin
      • [PATCH v2] thermal: cpu_cooling: fix stub function   Arnd Bergmann
• [PATCH, RFC 13/22] staging/logger: use kuid_t internally   Arnd Bergmann
• [PATCH, RFC 15/22] USB: EHCI: remove bogus #error   Arnd Bergmann
  • [PATCH, RFC 15/22] USB: EHCI: remove bogus #error   Alan Stern
    • [PATCH, RFC 15/22] USB: EHCI: remove bogus #error   Arnd Bergmann
• [PATCH, RFC 16/22] USB: UHCI: clarify Kconfig dependencies   Arnd Bergmann
  • [PATCH, RFC 16/22] USB: UHCI: clarify Kconfig dependencies   Alan Stern
    • [PATCH, RFC 16/22] USB: UHCI: clarify Kconfig dependencies   Arnd Bergmann
      • [PATCH, RFC 16/22] USB: UHCI: clarify Kconfig dependencies   Alan Stern
      • [PATCH, RFC 16/22] USB: UHCI: clarify Kconfig dependencies   Arnd Bergmann
• [PATCH, RFC 18/22] Xen: SWIOTLB is only used on x86   Arnd Bergmann
  • [PATCH, RFC 18/22] Xen: SWIOTLB is only used on x86   Stefano Stabellini
    • [PATCH, RFC 18/22] Xen: SWIOTLB is only used on x86   Konrad Rzeszutek Wilk
      • [PATCH, RFC 18/22] Xen: SWIOTLB is only used on x86   Arnd Bergmann
• [PATCH, RFC 20/22] media: coda: select GENERIC_ALLOCATOR   Arnd Bergmann
  • Re: [PATCH, RFC 20/22] media: coda: select GENERIC_ALLOCATOR   Alexander Shiyan
    • [PATCH, RFC 20/22] media: coda: select GENERIC_ALLOCATOR   Arnd Bergmann
      • [PATCH, RFC 20/22] media: coda: select GENERIC_ALLOCATOR   Shawn Guo
• [PATCH, RFC 21/22] davinci: vpfe_capture needs i2c   Arnd Bergmann
  • [PATCH, RFC 21/22] davinci: vpfe_capture needs i2c   Prabhakar Lad
• [PATCH, RFC 22/22] radio-si4713: depend on SND_SOC   Arnd Bergmann
  • [PATCH, RFC 22/22] radio-si4713: depend on SND_SOC   edubezval at gmail.com
    • [PATCH, RFC 22/22] radio-si4713: depend on SND_SOC   Arnd Bergmann
  • [PATCH, RFC 22/22] radio-si4713: depend on SND_SOC   Mauro Carvalho Chehab
    • [PATCH, RFC 22/22] radio-si4713: depend on SND_SOC   Arnd Bergmann
• [PATCH] dmaengine: sirf: move driver init from module_init to subsys_initcall   Vinod Koul
• [PATCH v3 20/32] arm64: KVM: Plug the arch timer   Catalin Marinas
• [PATCH 0/4] Fixing boot warnings in -next   Lee Jones
  • [PATCH 1/4] ARM: ux500: Rid ignored return value of regulator_enable() compiler warning   Lee Jones
    • [PATCH 1/4] ARM: ux500: Rid ignored return value of regulator_enable() compiler warning   Linus Walleij
  • [PATCH 2/4] mfd: ab8500-gpadc: Suppress 'ignoring regulator_enable() return value' warning   Lee Jones
    • [PATCH 2/4] mfd: ab8500-gpadc: Suppress 'ignoring regulator_enable() return value' warning   Linus Walleij
      • [PATCH 2/4] mfd: ab8500-gpadc: Suppress 'ignoring regulator_enable() return value' warning   Lee Jones
      • [PATCH 2/4] mfd: ab8500-gpadc: Suppress 'ignoring regulator_enable() return value' warning   Lee Jones
    • [PATCH 2/4 v2] mfd: ab8500-gpadc: Suppress 'ignoring regulator_enable() return value' warning   Lee Jones
      • [PATCH 2/4 v2] mfd: ab8500-gpadc: Suppress 'ignoring regulator_enable() return value' warning   Linus Walleij
      • [PATCH 2/4 v2] mfd: ab8500-gpadc: Suppress 'ignoring regulator_enable() return value' warning   Lee Jones
  • [PATCH 3/4] mmc: mmci: Ensure return value of regulator_enable() is checked   Lee Jones
    • [PATCH 3/4] mmc: mmci: Ensure return value of regulator_enable() is checked   Ulf Hansson
      • [PATCH 3/4] mmc: mmci: Ensure return value of regulator_enable() is checked   Lee Jones
      • [PATCH 3/4] mmc: mmci: Ensure return value of regulator_enable() is checked   Ulf Hansson
      • [PATCH 3/4] mmc: mmci: Ensure return value of regulator_enable() is checked   Lee Jones
  • [PATCH 4/4] staging: ste_rmi4: Suppress 'ignoring return value of ‘regulator_enable()' warning   Lee Jones
    • [PATCH 4/4] staging: ste_rmi4: Suppress 'ignoring return value of ‘regulator_enable()' warning   Srinidhi Kasagar
      • [PATCH 4/4] staging: ste_rmi4: Suppress 'ignoring return value of ‘regulator_enable()' warning   Lee Jones
      • [PATCH 4/4] staging: ste_rmi4: Suppress 'ignoring return value of ‘regulator_enable()' warning   Dan Carpenter
      • [PATCH 4/4] staging: ste_rmi4: Suppress 'ignoring return value of ‘regulator_enable()' warning   Srinidhi Kasagar
      • [PATCH 4/4] staging: ste_rmi4: Suppress 'ignoring return value of ‘regulator_enable()' warning   Dan Carpenter
    • [PATCH 4/4 v2] staging: ste_rmi4: Suppress 'ignoring return value of ‘regulator_enable()' warning   Lee Jones
    • [PATCH 4/4] staging: ste_rmi4: Suppress 'ignoring return value of ‘regulator_enable()' warning   Lee Jones
      • [PATCH 4/4] staging: ste_rmi4: Suppress 'ignoring return value of ‘regulator_enable()' warning   Greg Kroah-Hartman
• [PATCH] ARM: OMAP-USB: Fix possible memory leak   Alexander Shiyan
  • [PATCH] ARM: OMAP-USB: Fix possible memory leak   Nishanth Menon
    • Re[2]: [PATCH] ARM: OMAP-USB: Fix possible memory leak   Alexander Shiyan
      • [PATCH] ARM: OMAP-USB: Fix possible memory leak   Felipe Balbi
      • [PATCH] ARM: OMAP-USB: Fix possible memory leak   Russell King - ARM Linux
      • [PATCH] ARM: OMAP-USB: Fix possible memory leak   Felipe Balbi
      • [PATCH] ARM: OMAP-USB: Fix possible memory leak   Felipe Balbi
      • [PATCH] ARM: OMAP-USB: Fix possible memory leak   Felipe Balbi
      • [PATCH] ARM: OMAP-USB: Fix possible memory leak   Russell King - ARM Linux
      • [PATCH] ARM: OMAP-USB: Fix possible memory leak   Felipe Balbi
      • [PATCH] ARM: OMAP-USB: Fix possible memory leak   Russell King - ARM Linux
      • [PATCH] ARM: OMAP-USB: Fix possible memory leak   Russell King - ARM Linux
      • [PATCH] ARM: OMAP-USB: Fix possible memory leak   Felipe Balbi
      • [PATCH] ARM: OMAP-USB: Fix possible memory leak   Russell King - ARM Linux
    • [PATCH] ARM: OMAP-USB: Fix possible memory leak   Russell King - ARM Linux
• [PATCH v3 24/32] arm64: KVM: 32bit GP register access   Catalin Marinas
  • [PATCH v3 24/32] arm64: KVM: 32bit GP register access   Marc Zyngier
    • [PATCH v3 24/32] arm64: KVM: 32bit GP register access   Catalin Marinas
      • [PATCH v3 24/32] arm64: KVM: 32bit GP register access   Christoffer Dall
      • [PATCH v3 24/32] arm64: KVM: 32bit GP register access   Peter Maydell
      • [PATCH v3 24/32] arm64: KVM: 32bit GP register access   Catalin Marinas
      • [PATCH v3 24/32] arm64: KVM: 32bit GP register access   Christoffer Dall
• [PATCH 0/7] ARM: u300 multiplatform support   Linus Walleij
  • [PATCH 1/7] ARM: u300: push down syscon registers   Linus Walleij
    • [PATCH 1/7] ARM: u300: push down syscon registers   Arnd Bergmann
      • [PATCH 1/7] ARM: u300: push down syscon registers   Linus Walleij
      • [PATCH 1/7] ARM: u300: push down syscon registers   Arnd Bergmann
      • [PATCH 1/7] ARM: u300: push down syscon registers   Linus Walleij
      • [PATCH 1/7] ARM: u300: push down syscon registers   Arnd Bergmann
    • [PATCH 1/7] ARM: u300: push down syscon registers   Mike Turquette
  • [PATCH 2/7] ARM: u300: remove deps from debug macro   Linus Walleij
  • [PATCH 3/7] ARM: u300: delete <mach/hardware.h>   Linus Walleij
  • [PATCH 4/7] ARM: u300: delete <mach/irqs.h>   Linus Walleij
  • [PATCH 5/7] ARM: u300: localize <mach/u300-regs.h>   Linus Walleij
  • [PATCH 6/7] ARM: u300: convert to multiplatform   Linus Walleij
  • [PATCH 7/7] ARM: u300: delete remnant machine headers   Linus Walleij
  • [PATCH 0/7] ARM: u300 multiplatform support   Arnd Bergmann
• [PATCH] ARM: u300: move debugmacro to debug includes   Linus Walleij
• [PATCH] ARM: ixp4xx: change type of ioremap function   Laura Abbott
  • [PATCH] ARM: ixp4xx: change type of ioremap function   Krzysztof Halasa
• [PATCH v10 0/2] (arm-soc for v3.10) arm: introduce psci_smp_ops   Stefano Stabellini
  • [PATCH v10 0/2] (arm-soc for v3.10) arm: introduce psci_smp_ops   Will Deacon
    • [PATCH v10 0/2] (arm-soc for v3.10) arm: introduce psci_smp_ops   Stefano Stabellini
      • [PATCH v10 0/2] (arm-soc for v3.10) arm: introduce psci_smp_ops   Russell King - ARM Linux
      • [PATCH v10 0/2] (arm-soc for v3.10) arm: introduce psci_smp_ops   Stefano Stabellini
      • [PATCH v10 0/2] (arm-soc for v3.10) arm: introduce psci_smp_ops   Russell King - ARM Linux
      • [PATCH v10 0/2] (arm-soc for v3.10) arm: introduce psci_smp_ops   Stefano Stabellini
      • [PATCH v10 0/2] (arm-soc for v3.10) arm: introduce psci_smp_ops   Russell King - ARM Linux
      • [PATCH v10 0/2] (arm-soc for v3.10) arm: introduce psci_smp_ops   Arnd Bergmann
      • [PATCH v10 0/2] (arm-soc for v3.10) arm: introduce psci_smp_ops   Olof Johansson
      • [PATCH v10 0/2] (arm-soc for v3.10) arm: introduce psci_smp_ops   Rob Herring
• [PATCH] ARM: ebsa110: Change the type of ioremap function   Laura Abbott
• [PATCHv3 3/3] net: velocity: Add platform device support to VIA velocity driver   Russell King - ARM Linux
• [PATCH v3 0/5] regulator/OMAP: Support TI Adaptive Body Bias(ABB) on-chip LDO driver   Nishanth Menon
  • [PATCH v3 1/5] regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver   Nishanth Menon
    • [PATCH v3 1/5] regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver   Mark Brown
      • [PATCH v3 1/5] regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver   Nishanth Menon
  • [PATCH v3 5/5] ARM: dts: OMAP5: Add device nodes for ABB   Nishanth Menon
• [PATCH v3 2/5] ARM: dts: OMAP36xx: Add device node for ABB   Nishanth Menon
• [PATCH v3 3/5] ARM: dts: OMAP443x: Add device nodes for ABB   Nishanth Menon
• [PATCH v3 4/5] ARM: dts: OMAP4460: Add device nodes for ABB   Nishanth Menon
• [PATCH] ARM: iop13xx: change type of ioremap function   Laura Abbott
  • [PATCH] ARM: iop13xx: change type of ioremap function   Arnd Bergmann
• [PATCH 0/4] ARM architecture fixes   Arnd Bergmann
  • [PATCH 1/4] ARM: compressed/head.S: work around new binutils warning   Arnd Bergmann
  • [PATCH 2/4] ARM: fix prototypes for arch_ioremap_caller functions   Arnd Bergmann
  • [PATCH 3/4] ARM: fix NOMMU __arm_ioremap prototype   Arnd Bergmann
    • [PATCH 3/4] ARM: fix NOMMU __arm_ioremap prototype   Russell King - ARM Linux
  • [PATCH 4/4] ARM: highbank: fix build after cache flush change   Arnd Bergmann
    • [PATCH 4/4] ARM: highbank: fix build after cache flush change   Rob Herring
      • [PATCH 4/4] ARM: highbank: fix build after cache flush change   Russell King - ARM Linux
      • [PATCH 4/4] ARM: highbank: fix build after cache flush change   Russell King - ARM Linux
• Freescale imx35: sgtl5000 codec not working over i2c   Johannes Braun
  • Freescale imx35: sgtl5000 codec not working over i2c   Sascha Hauer
    • Freescale imx35: sgtl5000 codec not working over i2c   Johannes Braun
      • Freescale imx35: sgtl5000 codec not working over i2c   Sascha Hauer
      • Freescale imx35: sgtl5000 codec not working over i2c   Johannes Braun
• [PATCH] arm: mm: Use phys_addr_t properly for ioremap functions   Russell King - ARM Linux
  • [PATCH] arm: mm: Use phys_addr_t properly for ioremap functions   Russell King - ARM Linux
• [PATCH] irqchip: add support for Marvell Orion SoCs   Sebastian Hesselbarth
  • [PATCH] irqchip: add support for Marvell Orion SoCs   Sebastian Hesselbarth
    • [PATCH] irqchip: add support for Marvell Orion SoCs   Russell King - ARM Linux
      • [PATCH] irqchip: add support for Marvell Orion SoCs   Sebastian Hesselbarth
      • [PATCH] irqchip: add support for Marvell Orion SoCs   Russell King - ARM Linux
      • [PATCH] irqchip: add support for Marvell Orion SoCs   Sebastian Hesselbarth
  • [PATCH] irqchip: add support for Marvell Orion SoCs   Jason Gunthorpe
    • [PATCH] irqchip: add support for Marvell Orion SoCs   Sebastian Hesselbarth
      • [PATCH] irqchip: add support for Marvell Orion SoCs   Jason Gunthorpe
      • [PATCH] irqchip: add support for Marvell Orion SoCs   Sebastian Hesselbarth
      • [PATCH] irqchip: add support for Marvell Orion SoCs   Andrew Lunn
      • [PATCH] irqchip: add support for Marvell Orion SoCs   Gregory CLEMENT
      • [PATCH] irqchip: add support for Marvell Orion SoCs   Jason Cooper
    • [PATCH] irqchip: add support for Marvell Orion SoCs   Arnd Bergmann
      • [PATCH] irqchip: add support for Marvell Orion SoCs   Sebastian Hesselbarth
      • [PATCH] irqchip: add support for Marvell Orion SoCs   Jason Gunthorpe
      • [PATCH] irqchip: add support for Marvell Orion SoCs   Sebastian Hesselbarth
  • [PATCH] irqchip: add support for Marvell Orion SoCs   Jason Cooper
  • [PATCH] irqchip: add support for Marvell Orion SoCs   Thomas Gleixner
    • [PATCH] irqchip: add support for Marvell Orion SoCs   Sebastian Hesselbarth
      • [PATCH] irqchip: add support for Marvell Orion SoCs   Arnd Bergmann
      • [PATCH] irqchip: add support for Marvell Orion SoCs   Sebastian Hesselbarth
      • [PATCH] irqchip: add support for Marvell Orion SoCs   Jason Cooper
  • [PATCH v2 0/5] ARM: orion: add orion irqchip driver   Sebastian Hesselbarth
    • [PATCH v2 1/5] irqchip: add support for Marvell Orion SoCs   Sebastian Hesselbarth
      • [PATCH v2 1/5] irqchip: add support for Marvell Orion SoCs   Russell King - ARM Linux
      • [PATCH v2 1/5] irqchip: add support for Marvell Orion SoCs   Sebastian Hesselbarth
      • [PATCH v2 1/5] irqchip: add support for Marvell Orion SoCs   Thomas Gleixner
      • [RFC patch 0/8] genirq: Support for irq domains in generic irq chip   Thomas Gleixner
      • [RFC patch 6/8] genirq: Split out code in generic chip   Thomas Gleixner
      • [RFC patch 6/8] genirq: Split out code in generic chip   Grant Likely
      • [RFC patch 7/8] genirq: generic chip: Add linear irq domain support   Thomas Gleixner
      • [RFC patch 7/8] genirq: generic chip: Add linear irq domain support   Russell King - ARM Linux
      • [RFC patch 7/8] genirq: generic chip: Add linear irq domain support   Thomas Gleixner
      • [RFC patch 7/8] genirq: generic chip: Add linear irq domain support   Sebastian Hesselbarth
      • [RFC patch 7/8] genirq: generic chip: Add linear irq domain support   Thomas Gleixner
      • [RFC patch 7/8] fixup 1/2: genirq: generic chip: Add linear irq domain support   Sebastian Hesselbarth
      • [RFC patch 7/8] fixup 1/2: genirq: generic chip: Add linear irq domain support   Thomas Gleixner
      • [RFC patch 7/8] fixup 2/2: genirq: generic chip: Add linear irq domain support   Sebastian Hesselbarth
      • [RFC patch 7/8] fixup 2/2: genirq: generic chip: Add linear irq domain support   Thomas Gleixner
      • [RFC patch 8/8] irqchip: sun4i: Convert to generic irq chip   Thomas Gleixner
      • [RFC patch 8/8] irqchip: sun4i: Convert to generic irq chip   Sebastian Hesselbarth
      • [RFC patch 0/8] genirq: Support for irq domains in generic irq chip   Uwe Kleine-König
      • [patch 0/8] genirq: Support for irq domains in generic irq chip - V2   Thomas Gleixner
      • [patch 1/8] genirq: generic chip: Remove the local cur_regs() function   Thomas Gleixner
      • [patch 2/8] genirq: generic chip: Add support for per chip type mask cache   Thomas Gleixner
      • [patch 3/8] genirq: generic chip: Handle separate mask registers   Thomas Gleixner
      • [patch 4/8] genirq: generic chip: Cache per irq bit mask   Thomas Gleixner
      • [patch 5/8] genirq: Add a mask calculation function   Thomas Gleixner
      • [patch 6/8] genirq: Split out code in generic chip   Thomas Gleixner
      • [patch 7/8] genirq: generic chip: Add linear irq domain support   Thomas Gleixner
      • [patch 7/8] genirq: generic chip: Add linear irq domain support   Grant Likely
      • [patch 7/8] genirq: generic chip: Add linear irq domain support   Thomas Gleixner
      • [patch 8/8] irqchip: sun4i: Convert to generic irq chip   Thomas Gleixner
      • [patch 8/8] irqchip: sun4i: Convert to generic irq chip   Rob Herring
      • [PATCH] irq-sun4i: Fix trivial build errors   Maxime Ripard
      • [patch 8/8] irqchip: sun4i: Convert to generic irq chip   Maxime Ripard
      • [patch 8/8] irqchip: sun4i: Convert to generic irq chip   Maxime Ripard
      • [RFC patch 1/8] genirq: generic chip: Remove the local cur_regs() function   Thomas Gleixner
      • [RFC patch 1/8] genirq: generic chip: Remove the local cur_regs() function   Grant Likely
      • [RFC patch 2/8] genirq: generic chip: Add support for per chip type mask cache   Thomas Gleixner
      • [RFC patch 3/8] genirq: generic chip: Handle separate mask registers   Thomas Gleixner
      • [RFC patch 4/8] genirq: generic chip: Cache per irq bit mask   Thomas Gleixner
      • [RFC patch 4/8] genirq: generic chip: Cache per irq bit mask   Russell King - ARM Linux
      • [RFC patch 4/8] genirq: generic chip: Cache per irq bit mask   Thomas Gleixner
      • [RFC patch 5/8] genirq: Add a mask calculation function   Thomas Gleixner
    • [PATCH v2 2/5] ARM: dove: add DT parsing for legacy mv643xx_eth   Sebastian Hesselbarth
      • [PATCH v2 2/5] ARM: dove: add DT parsing for legacy mv643xx_eth   Andrew Lunn
      • [PATCH v2 2/5] ARM: dove: add DT parsing for legacy mv643xx_eth   Sebastian Hesselbarth
      • [PATCH v2 2/5] ARM: dove: add DT parsing for legacy mv643xx_eth   Jason Cooper
    • [PATCH v2 3/5] ARM: dove: add DT parsing for legacy timer   Sebastian Hesselbarth
    • [PATCH v2 4/5] ARM: dove: move DT boards to orion irqchip driver   Sebastian Hesselbarth
    • [PATCH v2 5/5] ARM: dove: add DT nodes for irqchip conversion   Sebastian Hesselbarth
• [PATCH V2] video: implement a simple framebuffer driver   Stephen Warren
  • [PATCH V2] video: implement a simple framebuffer driver   Geert Uytterhoeven
  • [PATCH V2] video: implement a simple framebuffer driver   Dave Airlie
  • [PATCH V2] video: implement a simple framebuffer driver   Laurent Pinchart
    • [PATCH V2] video: implement a simple framebuffer driver   Andrew Morton
      • [PATCH V2] video: implement a simple framebuffer driver   Stephen Warren
      • [PATCH V2] video: implement a simple framebuffer driver   Olof Johansson
      • [PATCH V2] video: implement a simple framebuffer driver   Rob Landley
  • [PATCH V2] video: implement a simple framebuffer driver   Alexandre Courbot
    • [PATCH V2] video: implement a simple framebuffer driver   Stephen Warren
• [PATCH 0/3] ARM: dove: prepare and move to orion irqchip driver   Sebastian Hesselbarth
  • [PATCH 1/3] ARM: dove: add DT parsing for legacy mv643xx_eth   Sebastian Hesselbarth
    • [PATCH 1/3] ARM: dove: add DT parsing for legacy mv643xx_eth   Jason Cooper
  • [PATCH 2/3] ARM: dove: add DT parsing for legacy timer   Sebastian Hesselbarth
    • [PATCH 2/3] ARM: dove: add DT parsing for legacy timer   Jason Cooper
  • [PATCH 3/3] ARM: dove: move DT boards to orion irqchip driver   Sebastian Hesselbarth
  • [PATCH 0/3] ARM: dove: prepare and move to orion irqchip driver   Jason Cooper
• [RFC PATCH v2 13/13] ARM: DT: kernel: DT cpu node bindings update   Stephen Warren
  • [RFC PATCH v2 13/13] ARM: DT: kernel: DT cpu node bindings update   Lorenzo Pieralisi
• [PATCHv5 0/3] Add support for velocity network driver on platform devices   Tony Prisk
  • [PATCHv5 1/3] net: velocity: Rename vptr->dev to vptr->netdev   Tony Prisk
  • [PATCHv5 2/3] net: velocity: Convert to generic dma functions   Tony Prisk
  • [PATCHv5 3/3] net: velocity: Add platform device support to VIA velocity driver   Tony Prisk
  • [PATCHv5 0/3] Add support for velocity network driver on platform devices   David Miller
• [PATCH] ARM: kirkwood: add button for OpenBlock A6   Gregory CLEMENT
  • [PATCH] ARM: kirkwood: add button for OpenBlock A6   Ezequiel Garcia
  • [PATCH] ARM: kirkwood: add button for OpenBlock A6   Gregory CLEMENT
    • [PATCH] ARM: kirkwood: add button for OpenBlock A6   Thomas Petazzoni
• [PATCHv2] arm: Preserve TPIDRURW on context switch   André Hentschel
  • [PATCHv2] arm: Preserve TPIDRURW on context switch   Jonathan Austin
    • [PATCHv2] arm: Preserve TPIDRURW on context switch   Russell King - ARM Linux
      • [PATCHv2] arm: Preserve TPIDRURW on context switch   Jonathan Austin
      • [PATCHv2] arm: Preserve TPIDRURW on context switch   André Hentschel
      • [PATCHv2] arm: Preserve TPIDRURW on context switch   André Hentschel
      • [PATCHv2] arm: Preserve TPIDRURW on context switch   Jonathan Austin
• [PATCH 0/9] arm-soc: randconfig fixes   Arnd Bergmann
  • [PATCH 1/9] ARM: tegra: Tegra114 needs CPU_FREQ_TABLE   Arnd Bergmann
    • [PATCH 1/9] ARM: tegra: Tegra114 needs CPU_FREQ_TABLE   Viresh Kumar
      • [PATCH 1/9] ARM: tegra: Tegra114 needs CPU_FREQ_TABLE   Arnd Bergmann
      • [PATCH 1/9] ARM: tegra: Tegra114 needs CPU_FREQ_TABLE   Viresh Kumar
  • [PATCH 2/9] ARM: OMAP: build SMP code only for OMAP4/5   Arnd Bergmann
    • [PATCH 2/9] ARM: OMAP: build SMP code only for OMAP4/5   Tony Lindgren
  • [PATCH 5/9] ARM: imx: reset_controller may be disabled   Arnd Bergmann
  • [PATCH 0/9] arm-soc: randconfig fixes   Viresh Kumar
• [PATCH 3/9] ARM: imx: build CPU suspend code only when needed   Arnd Bergmann
• [PATCH 4/9] ARM: SPEAr: conditionalize l2x0 support   Arnd Bergmann
• [PATCH 6/9] ARM: SPEAr: conditionalize SMP code   Arnd Bergmann
• [PATCH 7/9] ARM: OMAP: don't select SERIAL_OMAP unconditionally   Arnd Bergmann
  • [PATCH 7/9] ARM: OMAP: don't select SERIAL_OMAP unconditionally   Tony Lindgren
    • [PATCH 7/9] ARM: OMAP: don't select SERIAL_OMAP unconditionally   Arnd Bergmann
      • [PATCH 7/9] ARM: OMAP: don't select SERIAL_OMAP unconditionally   Tony Lindgren
• [PATCH 8/9] ARM: SIRF: select SMP_ON_UP only on SMP builds   Arnd Bergmann
• [PATCH 9/9] ARM: ux500: always select ABX500_CORE   Arnd Bergmann
  • [PATCH 9/9] ARM: ux500: always select ABX500_CORE   Linus Walleij
    • [PATCH 9/9] ARM: ux500: always select ABX500_CORE   Arnd Bergmann
      • [PATCH 9/9] ARM: ux500: always select ABX500_CORE   Linus Walleij
      • [PATCH 9/9] ARM: ux500: always select ABX500_CORE   Arnd Bergmann
      • [PATCH 9/9] ARM: ux500: always select ABX500_CORE   Linus Walleij
      • [PATCH 9/9] ARM: ux500: always select ABX500_CORE   Arnd Bergmann
      • [PATCH 9/9] ARM: ux500: always select ABX500_CORE   Linus Walleij
      • [PATCH 9/9] ARM: ux500: always select ABX500_CORE   Arnd Bergmann
      • [PATCH 9/9] ARM: ux500: always select ABX500_CORE   Linus Walleij
      • [PATCH 9/9] ARM: ux500: always select ABX500_CORE   Arnd Bergmann
• [PATCH 0/5] CPUFreq: ARM big LITTLE Fixes   Rafael J. Wysocki
• [PATCH 0/2] clk: add of_clk_provider stubs to enable clk-si5351 on non OF   Arnd Bergmann
  • [PATCH 0/2] clk: add of_clk_provider stubs to enable clk-si5351 on non OF   Mike Turquette
• [GIT PULL] mailbox driver framework for v3.10 merge window   Suman Anna
  • [GIT PULL] mailbox driver framework for v3.10 merge window   Jassi Brar
    • [GIT PULL] mailbox driver framework for v3.10 merge window   Suman Anna
  • [GIT PULL] mailbox driver framework for v3.10 merge window   Arnd Bergmann
    • [GIT PULL] mailbox driver framework for v3.10 merge window   Linus Walleij
      • [GIT PULL] mailbox driver framework for v3.10 merge window   Arnd Bergmann
• [PATCH V2] ARM: bcm281xx: Add L2 support for Rev A2 chips   Christian Daudt
  • [PATCH V2] ARM: bcm281xx: Add L2 support for Rev A2 chips   Will Deacon
    • [PATCH V2] ARM: bcm281xx: Add L2 support for Rev A2 chips   Christian Daudt
      • [PATCH V2] ARM: bcm281xx: Add L2 support for Rev A2 chips   Will Deacon
  • [PATCH V2] ARM: bcm281xx: Add L2 support for Rev A2 chips   Olof Johansson
    • [PATCH V2] ARM: bcm281xx: Add L2 support for Rev A2 chips   Russell King - ARM Linux
• [PATCH] ARM: imx: fix typo in gpu3d_shader_sels   Shawn Guo
  • [PATCH] ARM: imx: fix typo in gpu3d_shader_sels   Dirk Behme
• [PATCH 0/5] Add initial i.MX6 SoloLite support   Shawn Guo
  • [PATCH 4/5] ARM: dts: add device tree source for imx6sl SoC   Shawn Guo
    • [PATCH 4/5] ARM: dts: add device tree source for imx6sl SoC   Dirk Behme
      • [PATCH 4/5] ARM: dts: add device tree source for imx6sl SoC   Shawn Guo
• [PATCH 1/5] ARM: imx: add clock support for imx6sl   Shawn Guo
• [PATCH 2/5] ARM: imx: enable low-level debug support for imx6sl   Shawn Guo
• [PATCH 3/5] ARM: imx: add initial support for imx6sl   Shawn Guo
• [PATCH 5/5] ARM: dts: imx6sl: add initial imx6sl-evk support   Shawn Guo
• [PATCH v2] clk: si5351: Allow user to define disabled state for every clock output   Marek Belisko
  • [PATCH v2] clk: si5351: Allow user to define disabled state for every clock output   Sebastian Hesselbarth
  • [PATCH v2] clk: si5351: Allow user to define disabled state for every clock output   Mike Turquette
• [PATCH v2 1/2] clk: si5351: Fix clkout rate computation.   Marek Belisko
  • [PATCH v2 2/2] clk: si5351: Set initial clkout rate when defined in platform data.   Marek Belisko
    • [PATCH v2 2/2] clk: si5351: Set initial clkout rate when defined in platform data.   Sebastian Hesselbarth
  • [PATCH v2 1/2] clk: si5351: Fix clkout rate computation.   Mike Turquette
    • [PATCH v2 1/2] clk: si5351: Fix clkout rate computation.   Marek Belisko
      • [PATCH v2 1/2] clk: si5351: Fix clkout rate computation.   Mike Turquette
• [PATCH v2] ARM: dts: Add SPI support for i.MX27 Phytec PCM038 module   Alexander Shiyan
  • [PATCH v2] ARM: dts: Add SPI support for i.MX27 Phytec PCM038 module   Sascha Hauer
  • [PATCH v2] ARM: dts: Add SPI support for i.MX27 Phytec PCM038 module   Shawn Guo
• [PATCH] clk: ux500: clk-sysctrl: handle clocks with no parents   Ulf Hansson
  • [PATCH] clk: ux500: clk-sysctrl: handle clocks with no parents   Ulf Hansson
    • [PATCH] clk: ux500: clk-sysctrl: handle clocks with no parents   Fabio Baltieri
      • [PATCH] clk: ux500: clk-sysctrl: handle clocks with no parents   Mike Turquette
• [PATCH v3 -next 3/5] arm: Add support for LZ4-compressed kernel   Kyungsik Lee
• [PATCH] ARM: i.MX6: clk: add i.MX6 DualLite differences   Dirk Behme
  • [PATCH] ARM: i.MX6: clk: add i.MX6 DualLite differences   Shawn Guo
• [PATCH] ARM: DMA-mapping: mark all !DMA_TO_DEVICE pages in unmapping as clean   Ming Lei
  • [PATCH] ARM: DMA-mapping: mark all !DMA_TO_DEVICE pages in unmapping as clean   Ming Lei
  • [PATCH] ARM: DMA-mapping: mark all !DMA_TO_DEVICE pages in unmapping as clean   Nicolas Pitre
    • [PATCH] ARM: DMA-mapping: mark all !DMA_TO_DEVICE pages in unmapping as clean   Ming Lei
• [PATCH RESEND 0/5] Add I2C support for Allwinner SoCs   Maxime Ripard
  • [PATCH 1/5] i2c: sunxi: Add Allwinner A1X i2c driver   Maxime Ripard
    • [PATCH 1/5] i2c: sunxi: Add Allwinner A1X i2c driver   Tomasz Figa
      • [PATCH 1/5] i2c: sunxi: Add Allwinner A1X i2c driver   Maxime Ripard
  • [PATCH 2/5] ARM: sunxi: dt: Add i2c controller nodes to the DTSI   Maxime Ripard
  • [PATCH 3/5] ARM: sun4i: dt: Add i2c muxing options   Maxime Ripard
  • [PATCH 4/5] ARM: sun5i: dt: Add i2c muxing options   Maxime Ripard
  • [PATCH 5/5] ARM: sun5i: olinuxino: Enable the i2c controllers   Maxime Ripard
  • [PATCH RESEND 0/5] Add I2C support for Allwinner SoCs   Maxime Ripard
• [PATCH 0/6] Davinci fbdev driver and enable it for DMx platform   Sekhar Nori
  • [PATCH 0/6] Davinci fbdev driver and enable it for DMx platform   Prabhakar Lad
• [PATCH 1/2] dmaengine: imx-dma: Add device tree probe support   Alexander Shiyan
  • [PATCH 1/2] dmaengine: imx-dma: Add device tree probe support   Sascha Hauer
    • Re[2]: [PATCH 1/2] dmaengine: imx-dma: Add device tree probe support   Alexander Shiyan
• [PATCH 2/2] ARM: dts: Add DMA support to imx27 device tree   Alexander Shiyan
• [PATCH v3 00/32] Port of KVM to arm64   Catalin Marinas
• [PATCH v5] pinctrl: Add pinctrl-s3c24xx driver   Heiko Stübner
  • [PATCH v5] pinctrl: Add pinctrl-s3c24xx driver   Kukjin Kim
    • [PATCH v5] pinctrl: Add pinctrl-s3c24xx driver   Heiko Stübner
      • [PATCH v5] pinctrl: Add pinctrl-s3c24xx driver   Kukjin Kim
• [RFC PATCH 0/2] ARM: KVM: Moving GIC/timer out of arch/arm   Marc Zyngier
  • [RFC PATCH 1/2] ARM: KVM: move GIC/timer code to a common location   Marc Zyngier
    • [RFC PATCH 1/2] ARM: KVM: move GIC/timer code to a common location   Christoffer Dall
      • [RFC PATCH 1/2] ARM: KVM: move GIC/timer code to a common location   Marc Zyngier
      • [RFC PATCH 1/2] ARM: KVM: move GIC/timer code to a common location   Paolo Bonzini
      • [RFC PATCH 1/2] ARM: KVM: move GIC/timer code to a common location   Paolo Bonzini
      • [RFC PATCH 1/2] ARM: KVM: move GIC/timer code to a common location   Marc Zyngier
  • [RFC PATCH 0/2] ARM: KVM: Moving GIC/timer out of arch/arm   Anup Patel
    • [RFC PATCH 0/2] ARM: KVM: Moving GIC/timer out of arch/arm   Marc Zyngier
      • [RFC PATCH 0/2] ARM: KVM: Moving GIC/timer out of arch/arm   Gleb Natapov
      • [RFC PATCH 0/2] ARM: KVM: Moving GIC/timer out of arch/arm   Catalin Marinas
• [RFC PATCH 2/2] ARM: KVM: standalone Makefile for vgic and timers   Marc Zyngier
  • [RFC PATCH 2/2] ARM: KVM: standalone Makefile for vgic and timers   Paolo Bonzini
    • [RFC PATCH 2/2] ARM: KVM: standalone Makefile for vgic and timers   Marc Zyngier
• Fwd: Tegra 30 System hangs because of commit "pinctrl: move subsystem mutex to pinctrl_dev struct"   Linus Walleij
  • Fwd: Tegra 30 System hangs because of commit "pinctrl: move subsystem mutex to pinctrl_dev struct"   Jean-Christophe PLAGNIOL-VILLARD
    • Fwd: Tegra 30 System hangs because of commit "pinctrl: move subsystem mutex to pinctrl_dev struct"   Linus Walleij
      • Fwd: Tegra 30 System hangs because of commit "pinctrl: move subsystem mutex to pinctrl_dev struct"   Jean-Christophe PLAGNIOL-VILLARD
      • Fwd: Tegra 30 System hangs because of commit "pinctrl: move subsystem mutex to pinctrl_dev struct"   Linus Walleij
      • Fwd: Tegra 30 System hangs because of commit "pinctrl: move subsystem mutex to pinctrl_dev struct"   Jean-Christophe PLAGNIOL-VILLARD
      • Fwd: Tegra 30 System hangs because of commit "pinctrl: move subsystem mutex to pinctrl_dev struct"   Linus Walleij
      • Fwd: Tegra 30 System hangs because of commit "pinctrl: move subsystem mutex to pinctrl_dev struct"   Bryan Wu
      • Fwd: Tegra 30 System hangs because of commit "pinctrl: move subsystem mutex to pinctrl_dev struct"   Jean-Christophe PLAGNIOL-VILLARD
      • Fwd: Tegra 30 System hangs because of commit "pinctrl: move subsystem mutex to pinctrl_dev struct"   Russell King - ARM Linux
      • Fwd: Tegra 30 System hangs because of commit "pinctrl: move subsystem mutex to pinctrl_dev struct"   Linus Walleij
      • Fwd: Tegra 30 System hangs because of commit "pinctrl: move subsystem mutex to pinctrl_dev struct"   Grant Likely
      • Fwd: Tegra 30 System hangs because of commit "pinctrl: move subsystem mutex to pinctrl_dev struct"   Olof Johansson
      • Fwd: Tegra 30 System hangs because of commit "pinctrl: move subsystem mutex to pinctrl_dev struct"   Fathi Boudra
      • Fwd: Tegra 30 System hangs because of commit "pinctrl: move subsystem mutex to pinctrl_dev struct"   Jean-Christophe PLAGNIOL-VILLARD
      • Fwd: Tegra 30 System hangs because of commit "pinctrl: move subsystem mutex to pinctrl_dev struct"   Rob Herring
      • Fwd: Tegra 30 System hangs because of commit "pinctrl: move subsystem mutex to pinctrl_dev struct"   Jean-Christophe PLAGNIOL-VILLARD
      • Fwd: Tegra 30 System hangs because of commit "pinctrl: move subsystem mutex to pinctrl_dev struct"   Stephen Warren
      • Fwd: Tegra 30 System hangs because of commit "pinctrl: move subsystem mutex to pinctrl_dev struct"   Jean-Christophe PLAGNIOL-VILLARD
      • Fwd: Tegra 30 System hangs because of commit "pinctrl: move subsystem mutex to pinctrl_dev struct"   Bryan Wu
      • Fwd: Tegra 30 System hangs because of commit "pinctrl: move subsystem mutex to pinctrl_dev struct"   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/63] dmaengine: Convert to correct API & Device Tree handling   Lee Jones
  • [PATCH 01/63] ARM: ux500: Supply address location names for the DMA40 DMA controller   Lee Jones
    • [PATCH 01/63] ARM: ux500: Supply address location names for the DMA40 DMA controller   Linus Walleij
  • [PATCH 02/63] ARM: ux500: Setup the DMA40 driver's DT node using the new DMA API   Lee Jones
    • [PATCH 02/63] ARM: ux500: Setup the DMA40 driver's DT node using the new DMA API   Linus Walleij
  • [PATCH 03/63] ARM: ux500: Supply UART's DMA configuration via Device Tree   Lee Jones
    • [PATCH 03/63] ARM: ux500: Supply UART's DMA configuration via Device Tree   Linus Walleij
  • [PATCH 04/63] ARM: ux500: Supply MMC DMA configuration via Device Tree   Lee Jones
    • [PATCH 04/63] ARM: ux500: Supply MMC DMA configuration via Device Tree   Linus Walleij
  • [PATCH 05/63] ARM: ux500: Populate the ux500-musb Device Tree entry   Lee Jones
    • [PATCH 05/63] ARM: ux500: Populate the ux500-musb Device Tree entry   Linus Walleij
  • [PATCH 06/63] ARM: ux500: Pass DMA memcpy channels though Device Tree   Lee Jones
    • [PATCH 06/63] ARM: ux500: Pass DMA memcpy channels though Device Tree   Linus Walleij
  • [PATCH 07/63] dmaengine: ste_dma40: Assign memcpy channels in the driver   Lee Jones
    • [PATCH 07/63] dmaengine: ste_dma40: Assign memcpy channels in the driver   Linus Walleij
    • [PATCH 07/63] dmaengine: ste_dma40: Assign memcpy channels in the driver   Linus Walleij
  • [PATCH 08/63] dmaengine: ste_dma40: Move default memcpy configs into the driver   Lee Jones
    • [PATCH 08/63] dmaengine: ste_dma40: Move default memcpy configs into the driver   Linus Walleij
  • [PATCH 09/63] dmaengine: ste_dma40: Rectify incorrect configuration validation checking   Lee Jones
    • [PATCH 09/63] dmaengine: ste_dma40: Rectify incorrect configuration validation checking   Linus Walleij
    • [PATCH 09/63] dmaengine: ste_dma40: Rectify incorrect configuration validation checking   Linus Walleij
  • [PATCH 10/63] dmaengine: ste_dma40: Amalgamate DMA source and destination channel numbers   Lee Jones
    • [PATCH 10/63] dmaengine: ste_dma40: Amalgamate DMA source and destination channel numbers   Linus Walleij
    • [PATCH 10/63] dmaengine: ste_dma40: Amalgamate DMA source and destination channel numbers   Linus Walleij
      • [PATCH 10/63] dmaengine: ste_dma40: Amalgamate DMA source and destination channel numbers   Vinod Koul
  • [PATCH 11/63] ARM: ux500: Strip out duplicate USB DMA configuration   Lee Jones
    • [PATCH 11/63] ARM: ux500: Strip out duplicate USB DMA configuration   Linus Walleij
  • [PATCH 12/63] dmaengine: ste_dma40: Remove home-brew MAX() macro   Lee Jones
    • [PATCH 12/63] dmaengine: ste_dma40: Remove home-brew MAX() macro   Linus Walleij
    • [PATCH 12/63] dmaengine: ste_dma40: Remove home-brew MAX() macro   Linus Walleij
  • [PATCH 13/63] ARM: ux500: Remove unused 'data_width' attributes from SDI DMA configs   Lee Jones
    • [PATCH 13/63] ARM: ux500: Remove unused 'data_width' attributes from SDI DMA configs   Linus Walleij
  • [PATCH 14/63] ARM: ux500: Remove unused 'data_width' attributes from SSP DMA configs   Lee Jones
    • [PATCH 14/63] ARM: ux500: Remove unused 'data_width' attributes from SSP DMA configs   Linus Walleij
  • [PATCH 15/63] ARM: ux500: Remove unused 'data_width' attributes from UART DMA configs   Lee Jones
    • [PATCH 15/63] ARM: ux500: Remove unused 'data_width' attributes from UART DMA configs   Linus Walleij
  • [PATCH 16/63] ARM: ux500: Remove superfluous 'psize' attribute from Audio platform data   Lee Jones
    • [PATCH 16/63] ARM: ux500: Remove superfluous 'psize' attribute from Audio platform data   Linus Walleij
      • [PATCH 16/63] ARM: ux500: Remove superfluous 'psize' attribute from Audio platform data   Fabio Baltieri
      • [PATCH 16/63] ARM: ux500: Remove superfluous 'psize' attribute from Audio platform data   Linus Walleij
  • [PATCH 17/63] dmaengine: ste_dma40: Calculate number of logical channels from physical ones   Lee Jones
    • [PATCH 17/63] dmaengine: ste_dma40: Calculate number of logical channels from physical ones   Linus Walleij
  • [PATCH 18/63] dmaengine: ste_dma40: Remove 'always true' checking   Lee Jones
    • [PATCH 18/63] dmaengine: ste_dma40: Remove 'always true' checking   Linus Walleij
  • [PATCH 19/63] dmaengine: ste_dma40: Separate Logical Global Interrupt Mask (GIM) unmasking   Lee Jones
    • [PATCH 19/63] dmaengine: ste_dma40: Separate Logical Global Interrupt Mask (GIM) unmasking   Linus Walleij
      • [PATCH 19/63] dmaengine: ste_dma40: Separate Logical Global Interrupt Mask (GIM) unmasking   Lee Jones
  • [PATCH 20/63] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()   Lee Jones
    • [PATCH 20/63] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()   Linus Walleij
      • [PATCH 20/63] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()   Lee Jones
  • [PATCH 21/63] dmaengine: ste_dma40: Don't configure runtime configurable setup during allocate   Lee Jones
    • [PATCH 21/63] dmaengine: ste_dma40: Don't configure runtime configurable setup during allocate   Linus Walleij
      • [PATCH 21/63] dmaengine: ste_dma40: Don't configure runtime configurable setup during allocate   Lee Jones
  • [PATCH 22/63] dmaengine: ste_dma40: Move rev error-check up to revision acquisition   Lee Jones
    • [PATCH 22/63] dmaengine: ste_dma40: Move rev error-check up to revision acquisition   Linus Walleij
  • [PATCH 23/63] dmaengine: ste_dma40: Also report the number of logical channels   Lee Jones
    • [PATCH 23/63] dmaengine: ste_dma40: Also report the number of logical channels   Linus Walleij
    • [PATCH 23/63] dmaengine: ste_dma40: Also report the number of logical channels   Linus Walleij
    • [PATCH 23/63] dmaengine: ste_dma40: Also report the number of logical channels   Vinod Koul
  • [PATCH 24/63] dmaengine: ste_dma40: Allocate plat_data on declaration   Lee Jones
    • [PATCH 24/63] dmaengine: ste_dma40: Allocate plat_data on declaration   Linus Walleij
  • [PATCH 25/63] dmaengine: ste_dma40: Allow driver to be probe()able when DT is enabled   Lee Jones
    • [PATCH 25/63] dmaengine: ste_dma40: Allow driver to be probe()able when DT is enabled   Linus Walleij
  • [PATCH 26/63] dmaengine: ste_dma40: Supply full Device Tree parsing support   Lee Jones
    • [PATCH 26/63] dmaengine: ste_dma40: Supply full Device Tree parsing support   Linus Walleij
      • [PATCH 26/63] dmaengine: ste_dma40: Supply full Device Tree parsing support   Linus Walleij
    • [PATCH 26/63] dmaengine: ste_dma40: Supply full Device Tree parsing support   Vinod Koul
  • [PATCH 27/63] ARM: ux500: Pass remnant platform data though to DMA40 driver   Lee Jones
    • [PATCH 27/63] ARM: ux500: Pass remnant platform data though to DMA40 driver   Linus Walleij
  • [PATCH 28/63] ARM: ux500: Stop passing UART's platform data for Device Tree boots   Lee Jones
    • [PATCH 28/63] ARM: ux500: Stop passing UART's platform data for Device Tree boots   Linus Walleij
      • [PATCH 28/63] ARM: ux500: Stop passing UART's platform data for Device Tree boots   Lee Jones
      • [PATCH 28/63] ARM: ux500: Stop passing UART's platform data for Device Tree boots   Lee Jones
  • [PATCH 29/63] ARM: ux500: Stop passing MMC's platform data for Device Tree boots   Lee Jones
    • [PATCH 29/63] ARM: ux500: Stop passing MMC's platform data for Device Tree boots   Linus Walleij
  • [PATCH 30/63] ARM: ux500: Move SDI (MMC) and UART devices under more descriptive heading   Lee Jones
    • [PATCH 30/63] ARM: ux500: Move SDI (MMC) and UART devices under more descriptive heading   Linus Walleij
  • [PATCH 31/63] dmaengine: ste_dma40: Only use addresses passed as configuration information   Lee Jones
    • [PATCH 31/63] dmaengine: ste_dma40: Only use addresses passed as configuration information   Linus Walleij
  • [PATCH 32/63] dmaengine: ste_dma40: Remove redundant address fetching function   Lee Jones
  • [PATCH 33/63] ARM: ux500: Remove DMA address look-up table   Lee Jones
  • [PATCH 34/63] dmaengine: ste_dma40: Correct copy/paste error   Lee Jones
  • [PATCH 35/63] ARM: ux500: Remove unnecessary attributes from DMA channel request pdata   Lee Jones
  • [PATCH 36/63] crypto: ux500/hash - Prepare clock before enabling it   Lee Jones
    • [PATCH 36/63] crypto: ux500/hash - Prepare clock before enabling it   Ulf Hansson
  • [PATCH 37/63] crypto: ux500/hash - Set DMA configuration though dma_slave_config()   Lee Jones
  • [PATCH 38/63] ARM: ux500: Stop passing Hash DMA channel config information though pdata   Lee Jones
  • [PATCH 39/63] crypto: ux500/cryp - Prepare clock before enabling it   Lee Jones
    • [PATCH 39/63] crypto: ux500/cryp - Prepare clock before enabling it   Ulf Hansson
  • [PATCH 40/63] crypto: ux500/cryp - Set DMA configuration though dma_slave_config()   Lee Jones
  • [PATCH 41/63] ARM: ux500: Stop passing Cryp DMA channel config information though pdata   Lee Jones
  • [PATCH 42/63] crypto: ux500/[cryp|hash] - Show successful start-up in the bootlog   Lee Jones
  • [PATCH 43/63] ARM: ux500: Register Cyrp and Hash platform drivers on Snowball   Lee Jones
  • [PATCH 44/63] usb: musb: ux500: move channel number knowledge into the driver   Lee Jones
  • [PATCH 45/63] usb: musb: ux500: move the MUSB HDRC configuration into the driver   Lee Jones
  • [PATCH 46/63] usb: musb: ux500: take the dma_mask from coherent_dma_mask   Lee Jones
  • [PATCH 47/63] usb: musb: ux500: harden checks for platform data   Lee Jones
  • [PATCH 48/63] usb: musb: ux500: attempt to find channels by name before using pdata   Lee Jones
  • [PATCH 49/63] usb: musb: ux500: add device tree probing support   Lee Jones
  • [PATCH 50/63] ARM: ux500: Add an auxdata entry for MUSB for clock-name look-up   Lee Jones
  • [PATCH 51/63] ARM: ux500: Remove ux500-musb platform registation when booting with DT   Lee Jones
  • [PATCH 52/63] ARM: ux500: Remove empty function u8500_of_init_devices()   Lee Jones
  • [PATCH 53/63] dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s   Lee Jones
  • [PATCH 54/63] ARM: ux500: Replace ST-E's home-brew DMA direction definition with the generic one   Lee Jones
    • [PATCH 54/63] ARM: ux500: Replace ST-E's home-brew DMA direction definition with the generic one   Srinidhi Kasagar
      • [PATCH 54/63] ARM: ux500: Replace ST-E's home-brew DMA direction definition with the generic one   Lee Jones
      • [PATCH 54/63] ARM: ux500: Replace ST-E's home-brew DMA direction definition with the generic one   Srinidhi Kasagar
      • [PATCH 54/63] ARM: ux500: Replace ST-E's home-brew DMA direction definition with the generic one   Lee Jones
  • [PATCH 55/63] dmaengine: ste_dma40: Replace ST-E's home-brew DMA direction defs with generic ones   Lee Jones
  • [PATCH 56/63] ARM: ux500: Remove recently unused stedma40_xfer_dir enums   Lee Jones
    • [PATCH 56/63] ARM: ux500: Remove recently unused stedma40_xfer_dir enums   Srinidhi Kasagar
  • [PATCH 57/63] dmaengine: ste_dma40_ll: Use the BIT macro to replace ugly '(1 << x)'s   Lee Jones
  • [PATCH 58/63] dmaengine: ste_dma40: Convert data_width from register bit format to value   Lee Jones
  • [PATCH 59/63] dmaengine: ste_dma40_ll: Replace meaningless register set with comment   Lee Jones
  • [PATCH 60/63] dmaengine: ste_dma40: Allow memcpy channels to be configured from DT   Lee Jones
  • [PATCH 61/63] ARM: ux500: Stop passing DMA platform data though AUXDATA   Lee Jones
    • [PATCH 61/63] ARM: ux500: Stop passing DMA platform data though AUXDATA   Srinidhi Kasagar
  • [PATCH 62/63] dmaengine: ste_dma40: Fetch the number of physical channels from DT   Lee Jones
  • [PATCH 63/63] dmaengine: ste_dma40: Fetch disabled channels from DT   Lee Jones
• [PATCH 3/5] gpio/omap: Add DT support to GPIO driver   Linus Walleij
• [RFC PATCH 0/2] ARM: Remove any correlation between IPC and BogoMips value   Will Deacon
  • [RFC PATCH 2/2] init: calibrate: don't print out bogomips value on boot   Will Deacon
  • [RFC PATCH 0/2] ARM: Remove any correlation between IPC and BogoMips value   Christopher Covington
    • [RFC PATCH 0/2] ARM: Remove any correlation between IPC and BogoMips value   Will Deacon
      • [RFC PATCH 0/2] ARM: Remove any correlation between IPC and BogoMips value   Christopher Covington
      • [RFC PATCH 0/2] ARM: Remove any correlation between IPC and BogoMips value   Will Deacon
      • [RFC PATCH 0/2] ARM: Remove any correlation between IPC and BogoMips value   Christopher Covington
• [RFC PATCH 1/2] ARM: delay: print dummy values for bogomips   Will Deacon
  • [RFC PATCH 1/2] ARM: delay: print dummy values for bogomips   Pavel Machek
    • [RFC PATCH 1/2] ARM: delay: print dummy values for bogomips   Marc Zyngier
      • [RFC PATCH 1/2] ARM: delay: print dummy values for bogomips   Nicolas Pitre
      • [RFC PATCH 1/2] ARM: delay: print dummy values for bogomips   Rob Herring
      • [RFC PATCH 1/2] ARM: delay: print dummy values for bogomips   Nicolas Pitre
      • [RFC PATCH 1/2] ARM: delay: print dummy values for bogomips   Will Deacon
      • [RFC PATCH 1/2] ARM: delay: print dummy values for bogomips   Pavel Machek
      • [RFC PATCH 1/2] ARM: delay: print dummy values for bogomips   Nicolas Pitre
      • [RFC PATCH 1/2] ARM: delay: print dummy values for bogomips   Pavel Machek
• MVEBU PCI Express support   Greg
  • MVEBU PCI Express support   Marc Zyngier
  • MVEBU PCI Express support   Willy Tarreau
  • MVEBU PCI Express support   Thomas Petazzoni
    • MVEBU PCI Express support   Greg
• [GIT PULL] Two ux500 fixes for the v3.10 series   Linus Walleij
  • [GIT PULL] Two ux500 fixes for the v3.10 series   Arnd Bergmann
    • [GIT PULL] Two ux500 fixes for the v3.10 series   Linus Walleij
      • [GIT PULL] Two ux500 fixes for the v3.10 series   Arnd Bergmann
      • [GIT PULL] Two ux500 fixes for the v3.10 series   Olof Johansson
• [RFC 2/3] mailbox: Introduce a new common API   Suman Anna
  • [RFC 2/3] mailbox: Introduce a new common API   Jassi Brar
    • [RFC 2/3] mailbox: Introduce a new common API   Suman Anna
      • [RFC 2/3] mailbox: Introduce a new common API   Jassi Brar
      • [RFC 2/3] mailbox: Introduce a new common API   Suman Anna
      • [RFC 2/3] mailbox: Introduce a new common API   Jassi Brar
      • [RFC 2/3] mailbox: Introduce a new common API   Suman Anna
      • [RFC 2/3] mailbox: Introduce a new common API   Jassi Brar
      • [RFC 2/3] mailbox: Introduce a new common API   Suman Anna
      • [RFC 2/3] mailbox: Introduce a new common API   Jassi Brar
      • [RFC 2/3] mailbox: Introduce a new common API   Suman Anna
• [GIT PULL 0/4] ARM: Second batch of arm-soc changes for 3.10   Olof Johansson
  • [GIT PULL 1/4] ARM: arm-soc driver changes for 3.10   Olof Johansson
  • [GIT PULL 2/4] ARM: arm-soc pinctrl changes for Renesas for 3.10   Olof Johansson
  • [GIT PULL 3/4] ARM: platform specific firmware interfaces for 3.10   Olof Johansson
  • [GIT PULL 4/4] ARM: arm-soc board specific changes for 3.10, part 1   Olof Johansson
• [PATCH 2/2] staging/iio/mxs-lradc: fix preenable for multiple buffers   Michał Mirosław
  • [PATCH 2/2] staging/iio/mxs-lradc: fix preenable for multiple buffers   Jonathan Cameron
• [PATCH 1/2] staging/iio/mxs-lradc: cleanup masklength   Michał Mirosław
  • [PATCH 1/2] staging/iio/mxs-lradc: cleanup masklength   Jonathan Cameron
• [PATCH] ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 Si   Vaibhav Hiremath
  • [PATCH] ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 Si   Tony Lindgren
• [PATCH] ARM: OMAP2+: AM33xx: Add missing reset status info to GFX hwmod   Vaibhav Hiremath
  • [PATCH] ARM: OMAP2+: AM33xx: Add missing reset status info to GFX hwmod   Hiremath, Vaibhav
    • [PATCH] ARM: OMAP2+: AM33xx: Add missing reset status info to GFX hwmod   Tony Lindgren
      • [PATCH] ARM: OMAP2+: AM33xx: Add missing reset status info to GFX hwmod   Hiremath, Vaibhav
• DMA mapping API abuse in exynos-drm   Tomasz Figa
  • DMA mapping API abuse in exynos-drm   Marek Szyprowski
• [PATCH v8 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Benjamin Herrenschmidt
  • [PATCH v8 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Andrew Murray
    • [PATCH v8 1/3] of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and PowerPC   Benjamin Herrenschmidt
• [PATCH] Cpufreq: Fix incorrect dependecies for ARM SA11xx drivers   Alexander Shiyan
  • [PATCH] Cpufreq: Fix incorrect dependecies for ARM SA11xx drivers   Viresh Kumar
• [PATCH v4 0/7] enable support for AMBA drivers under x86   Borislav Petkov
  • [PATCH v4 0/7] enable support for AMBA drivers under x86   Alessandro Rubini
    • [PATCH v4 0/7] enable support for AMBA drivers under x86   Borislav Petkov
      • [PATCH v4 0/7] enable support for AMBA drivers under x86   Ingo Molnar
      • [PATCH v4 0/7] enable support for AMBA drivers under x86   Borislav Petkov
      • [PATCH v4 0/7] enable support for AMBA drivers under x86   Alessandro Rubini
• [PATCH 0/2] ARM: dts: OMAP36xx/OMAP4460 Fix CPU OPP voltages   Nishanth Menon
  • [PATCH 0/2] ARM: dts: OMAP36xx/OMAP4460 Fix CPU OPP voltages   Tony Lindgren
• [PATCH v2 1/3] GPIO: clps711x: Rewrite driver for using generic GPIO code   Linus Walleij
• [PATCH 1/1] ARM: at91: rm9200 fix time support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/1] ARM: at91: rm9200 fix time support   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 1/1] ARM: at91: rm9200 fix time support   Greg KH
    • [PATCH 1/1] ARM: at91: rm9200 fix time support   Nicolas Ferre
  • [PATCH 1/1] ARM: at91: rm9200 fix time support   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 1/1] ARM: at91: rm9200 fix time support   Nicolas Ferre
• mach-omap2/timer.c: Bug introduced while merging patch - ff931c82   Hiremath, Vaibhav
  • mach-omap2/timer.c: Bug introduced while merging patch - ff931c82   Tony Lindgren
    • mach-omap2/timer.c: Bug introduced while merging patch - ff931c82   Hiremath, Vaibhav
      • mach-omap2/timer.c: Bug introduced while merging patch - ff931c82   Tony Lindgren
      • mach-omap2/timer.c: Bug introduced while merging patch - ff931c82   Hiremath, Vaibhav
• [PATCH] ARM: U300: Add proper ifdef guard to fix build error when CONFIG_I2C_STU300=m   Axel Lin
  • [PATCH] ARM: U300: Add proper ifdef guard to fix build error when CONFIG_I2C_STU300=m   Linus Walleij
• [PATCHv2 0/4] mailbox: Common API   Jassi Brar
  • [PATCHv2 1/4] mailbox: rename pl320-ipc specific mailbox.h   Jassi Brar
  • [PATCHv2 2/4] mailbox: Introduce a new common API   Jassi Brar
    • [PATCHv2 2/4] mailbox: Introduce a new common API   Suman Anna
      • [PATCHv2 2/4] mailbox: Introduce a new common API   Jassi Brar
      • [PATCHv2 2/4] mailbox: Introduce a new common API   Suman Anna
      • [PATCHv2 2/4] mailbox: Introduce a new common API   Jassi Brar
      • [PATCHv2 2/4] mailbox: Introduce a new common API   Suman Anna
      • [PATCHv2 2/4] mailbox: Introduce a new common API   Jassi Brar
      • [PATCHv2 2/4] mailbox: Introduce a new common API   Suman Anna
    • [PATCHv2 2/4] mailbox: Introduce a new common API   Loic PALLARDY
  • [PATCHv2 3/4] mailbox: pl320: Introduce common API driver   Jassi Brar
    • [PATCHv2 3/4] mailbox: pl320: Introduce common API driver   Rob Herring
      • [PATCHv2 3/4] mailbox: pl320: Introduce common API driver   Jassi Brar
  • [PATCHv2 4/4] mailbox: omap2: Introduce common API driver   Jassi Brar
  • [PATCHv2 0/4] mailbox: Common API   Suman Anna
• [V9 PATCH 01/12] usb: phy: protect phy init and shutdown for mutiple deivces   Chao Xie
• [PATCH -next 1/2] arm: Remove enforced Os flag for LZ4 decompressor   Kyungsik Lee
  • [PATCH -next 2/2] kbuild: fix for updated LZ4 tool with the new streaming format   Kyungsik Lee
    • [PATCH -next 2/2] kbuild: fix for updated LZ4 tool with the new streaming format   Borislav Petkov
• [RFC PATCH] implement read_cpuid_ext for v7-M (Was: Re: [PATCHv2 2/3] ARM: Detect support for SDIV/UDIV from ISAR0) register   Uwe Kleine-König
  • [RFC PATCH] implement read_cpuid_ext for v7-M (Was: Re: [PATCHv2 2/3] ARM: Detect support for SDIV/UDIV from ISAR0) register   Stephen Boyd
  • [RFC PATCH] implement read_cpuid_ext for v7-M (Was: Re: [PATCHv2 2/3] ARM: Detect support for SDIV/UDIV from ISAR0) register   Will Deacon
    • [RFC PATCH] implement read_cpuid_ext for v7-M (Was: Re: [PATCHv2 2/3] ARM: Detect support for SDIV/UDIV from ISAR0) register   Uwe Kleine-König
      • [RFC PATCH] implement read_cpuid_ext for v7-M (Was: Re: [PATCHv2 2/3] ARM: Detect support for SDIV/UDIV from ISAR0) register   Will Deacon
    • [RFC PATCH] implement read_cpuid_ext for v7-M (Was: Re: [PATCHv2 2/3] ARM: Detect support for SDIV/UDIV from ISAR0) register   Jonathan Austin
      • [RFC PATCH] implement read_cpuid_ext for v7-M (Was: Re: [PATCHv2 2/3] ARM: Detect support for SDIV/UDIV from ISAR0) register   Uwe Kleine-König
      • [RFC PATCH] implement read_cpuid_ext for v7-M (Was: Re: [PATCHv2 2/3] ARM: Detect support for SDIV/UDIV from ISAR0) register   Will Deacon
  • [RFC PATCH] implement read_cpuid_ext for v7-M (Was: Re: [PATCHv2 2/3] ARM: Detect support for SDIV/UDIV from ISAR0) register   Jonathan Austin
• [PATCH V2 0/3] Emergency write support for virtio console devices.   Pranavkumar Sawargaonkar
  • [PATCH V2 1/3] virtio: console: Add emergency writeonly register to config space   Pranavkumar Sawargaonkar
    • [PATCH V2 1/3] virtio: console: Add emergency writeonly register to config space   Amit Shah
      • [PATCH V2 1/3] virtio: console: Add emergency writeonly register to config space   Rusty Russell
      • [PATCH V2 1/3] virtio: console: Add emergency writeonly register to config space   Pranavkumar Sawargaonkar
  • [PATCH V2 2/3] Documentation: virtio: Add emergency write (emerg_wr) config register in virtio console.   Pranavkumar Sawargaonkar
    • [PATCH V2 2/3] Documentation: virtio: Add emergency write (emerg_wr) config register in virtio console.   Rob Landley
      • [PATCH V2 2/3] Documentation: virtio: Add emergency write (emerg_wr) config register in virtio console.   Rusty Russell
    • [PATCH V2 2/3] Documentation: virtio: Add emergency write (emerg_wr) config register in virtio console.   Rusty Russell
      • [PATCH V2 2/3] Documentation: virtio: Add emergency write (emerg_wr) config register in virtio console.   Pranavkumar Sawargaonkar
      • [PATCH V2 2/3] Documentation: virtio: Add emergency write (emerg_wr) config register in virtio console.   Christopher Covington
      • [PATCH V2 2/3] Documentation: virtio: Add emergency write (emerg_wr) config register in virtio console.   Rusty Russell
      • [PATCH V2 2/3] Documentation: virtio: Add emergency write (emerg_wr) config register in virtio console.   Amit Shah
  • [PATCH V2 3/3] arm64: earlyprintk support for virtio-mmio console.   Pranavkumar Sawargaonkar
• dw_apb_timer_of.c: remove parts that were picoxcell-specific   Pavel Machek
  • dw_apb_timer_of.c: remove parts that were picoxcell-specific   Arnd Bergmann
    • dw_apb_timer_of.c: remove parts that were picoxcell-specific   Pavel Machek
      • dw_apb_timer_of.c: remove parts that were picoxcell-specific   Arnd Bergmann
      • dw_apb_timer_of.c: remove parts that were picoxcell-specific   Pavel Machek
      • dw_apb_timer_of.c: remove parts that were picoxcell-specific   John Stultz
      • dw_apb_timer_of.c: remove parts that were picoxcell-specific   Pavel Machek
      • dw_apb_timer_of.c: remove parts that were picoxcell-specific   John Stultz
      • dw_apb_timer_of.c: remove parts that were picoxcell-specific   Pavel Machek
      • dw_apb_timer_of.c: remove parts that were picoxcell-specific   Pavel Machek
  • dw_apb_timer_of.c: remove parts that were picoxcell-specific   Jamie Iles
• [PATCH RFC v2 0/4] xen/arm: CONFIG_PARAVIRT and stolen ticks accounting   Stefano Stabellini
  • [PATCH RFC v2 1/4] xen: move xen_setup_runstate_info and get_runstate_snapshot to drivers/xen/time.c   Stefano Stabellini
  • [PATCH RFC v2 2/4] arm: introduce CONFIG_PARAVIRT and pv_time_ops   Stefano Stabellini
    • [Xen-devel] [PATCH RFC v2 2/4] arm: introduce CONFIG_PARAVIRT and pv_time_ops   Ian Campbell
      • [Xen-devel] [PATCH RFC v2 2/4] arm: introduce CONFIG_PARAVIRT and pv_time_ops   Stefano Stabellini
      • [Xen-devel] [PATCH RFC v2 2/4] arm: introduce CONFIG_PARAVIRT and pv_time_ops   Ian Campbell
      • [Xen-devel] [PATCH RFC v2 2/4] arm: introduce CONFIG_PARAVIRT and pv_time_ops   Stefano Stabellini
  • [PATCH RFC v2 3/4] kernel: missing include in cputime.c   Stefano Stabellini
  • [PATCH RFC v2 4/4] xen/arm: account for stolen ticks   Stefano Stabellini
    • [Xen-devel] [PATCH RFC v2 4/4] xen/arm: account for stolen ticks   Ian Campbell
      • [Xen-devel] [PATCH RFC v2 4/4] xen/arm: account for stolen ticks   Stefano Stabellini
      • [Xen-devel] [PATCH RFC v2 4/4] xen/arm: account for stolen ticks   Ian Campbell
      • [Xen-devel] [PATCH RFC v2 4/4] xen/arm: account for stolen ticks   Stefano Stabellini
      • [Xen-devel] [PATCH RFC v2 4/4] xen/arm: account for stolen ticks   Konrad Rzeszutek Wilk
• [PATCH 0/7] mv643xx_eth: device tree bindings   Sebastian Hesselbarth
  • [PATCH v3 1/7] net: mv643xx_eth: add Device Tree bindings   Sebastian Hesselbarth
    • [PATCH v3 1/7] net: mv643xx_eth: add Device Tree bindings   Simon Baatz
      • [PATCH v3 1/7] net: mv643xx_eth: add Device Tree bindings   Sebastian Hesselbarth
  • [PATCH v3 2/7] net: mv643xx_eth: update Device Tree bindings documentation   Sebastian Hesselbarth
  • [PATCH v3 3/7] ARM: dove: remove legacy mv643xx_eth setup   Sebastian Hesselbarth
  • [PATCH v3 4/7] ARM: dove: add gigabit ethernet and mvmdio device tree nodes   Sebastian Hesselbarth
  • [PATCH v3 5/7] ARM: kirkwood: remove legacy mv643xx_eth board setup   Sebastian Hesselbarth
    • [PATCH v3 5/7] ARM: kirkwood: remove legacy mv643xx_eth board setup   Thomas Petazzoni
  • [PATCH v3 6/7] ARM: kirkwood: add gigabit ethernet and mvmdio device tree nodes   Sebastian Hesselbarth
    • [PATCH v3 6/7] ARM: kirkwood: add gigabit ethernet and mvmdio device tree nodes   Simon Baatz
      • [PATCH v3 6/7] ARM: kirkwood: add gigabit ethernet and mvmdio device tree nodes   Sebastian Hesselbarth
  • [PATCH v3 7/7] ARM: kirkwood: remove legacy clk alias for mv643xx_eth   Sebastian Hesselbarth
  • [PATCH 0/7] mv643xx_eth: device tree bindings   David Miller
  • [PATCH 0/7] mv643xx_eth: device tree bindings   Jason Cooper
    • [PATCH 0/7] mv643xx_eth: device tree bindings   Sebastian Hesselbarth
  • [PATCH 0/7] mv643xx_eth: device tree bindings   Valentin Longchamp
  • [PATCH v4 00/12] net: mv643xx_eth DT support and fixes   Sebastian Hesselbarth
    • [PATCH v4 01/12] net: mv643xx_eth: use phy_disconnect instead of phy_detach   Sebastian Hesselbarth
    • [PATCH v4 02/12] net: mv643xx_eth: use managed devm_ioremap for port registers   Sebastian Hesselbarth
    • [PATCH v4 03/12] net: mv643xx_eth: add phy_node to platform_data struct   Sebastian Hesselbarth
    • [PATCH v4 04/12] net: mv643xx_eth: use of_phy_connect if phy_node present   Sebastian Hesselbarth
    • [PATCH v4 05/12] net: mv643xx_eth: add DT parsing support   Sebastian Hesselbarth
    • [PATCH v4 06/12] ARM: dove: add gigabit ethernet and mvmdio device tree nodes   Sebastian Hesselbarth
      • [PATCH v4 06/12] ARM: dove: add gigabit ethernet and mvmdio device tree nodes   Andrew Lunn
      • [PATCH v4 06/12] ARM: dove: add gigabit ethernet and mvmdio device tree nodes   Sebastian Hesselbarth
      • [PATCH v4 06/12] ARM: dove: add gigabit ethernet and mvmdio device tree nodes   tiejun.chen
      • [PATCH v4 06/12] ARM: dove: add gigabit ethernet and mvmdio device tree nodes   Sebastian Hesselbarth
      • [PATCH v4 06/12] ARM: dove: add gigabit ethernet and mvmdio device tree nodes   Jason Cooper
      • [PATCH v4 06/12] ARM: dove: add gigabit ethernet and mvmdio device tree nodes   Jason Gunthorpe
      • [PATCH v4 06/12] ARM: dove: add gigabit ethernet and mvmdio device tree nodes   Jason Cooper
      • [PATCH v4 06/12] ARM: dove: add gigabit ethernet and mvmdio device tree nodes   Sebastian Hesselbarth
      • [PATCH v4 06/12] ARM: dove: add gigabit ethernet and mvmdio device tree nodes   Jason Cooper
      • [PATCH v4 06/12] ARM: dove: add gigabit ethernet and mvmdio device tree nodes   Sebastian Hesselbarth
      • [PATCH v4 06/12] ARM: dove: add gigabit ethernet and mvmdio device tree nodes   Jason Cooper
      • [PATCH v4 06/12] ARM: dove: add gigabit ethernet and mvmdio device tree nodes   Sebastian Hesselbarth
      • [PATCH v4 06/12] ARM: dove: add gigabit ethernet and mvmdio device tree nodes   Jason Cooper
      • [PATCH v4 06/12] ARM: dove: add gigabit ethernet and mvmdio device tree nodes   Sebastian Hesselbarth
      • [PATCH v4 06/12] ARM: dove: add gigabit ethernet and mvmdio device tree nodes   Jason Cooper
      • [PATCH v4 06/12] ARM: dove: add gigabit ethernet and mvmdio device tree nodes   Sebastian Hesselbarth
      • [PATCH v4 06/12] ARM: dove: add gigabit ethernet and mvmdio device tree nodes   Jason Gunthorpe
      • [PATCH v4 06/12] ARM: dove: add gigabit ethernet and mvmdio device tree nodes   Sebastian Hesselbarth
    • [PATCH v4 07/12] ARM: kirkwood: add gigabit ethernet and mvmdio device tree nodes   Sebastian Hesselbarth
    • [PATCH v4 08/12] ARM: orion5x: add gigabit ethernet and mvmdio device tree nodes   Sebastian Hesselbarth
    • [PATCH v4 09/12] ARM: dove: remove legacy mv643xx_eth setup   Sebastian Hesselbarth
    • [PATCH v4 10/12] ARM: kirkwood: remove legacy clk alias for mv643xx_eth   Sebastian Hesselbarth
    • [PATCH v4 11/12] ARM: kirkwood: remove redundant DT board files   Sebastian Hesselbarth
      • [PATCH v4 11/12] ARM: kirkwood: remove redundant DT board files   Simon Baatz
      • [PATCH v4 11/12] ARM: kirkwood: remove redundant DT board files   Sebastian Hesselbarth
      • [PATCH v4 11/12] ARM: kirkwood: remove redundant DT board files   Jason Cooper
      • [PATCH v4 11/12] ARM: kirkwood: remove redundant DT board files   Sebastian Hesselbarth
    • [PATCH v4 12/12] ARM: orion5x: remove legacy mv643xx_eth board setup   Sebastian Hesselbarth
    • [PATCH v4 00/12] net: mv643xx_eth DT support and fixes   Andrew Lunn
    • [PATCH 1/2] ARM: kirkwood: proper retain MAC address workaround on DT ethernet   Sebastian Hesselbarth
      • [PATCH 2/2] net: mv643xx_eth: proper initialization for Kirkwood SoCs   Sebastian Hesselbarth
      • [PATCH 2/2] net: mv643xx_eth: proper initialization for Kirkwood SoCs   Jason Gunthorpe
      • [PATCH 2/2] net: mv643xx_eth: proper initialization for Kirkwood SoCs   Sebastian Hesselbarth
      • [PATCH 2/2] net: mv643xx_eth: proper initialization for Kirkwood SoCs   Jason Cooper
      • [PATCH 2/2] net: mv643xx_eth: proper initialization for Kirkwood SoCs   Jason Gunthorpe
      • [PATCH 2/2] net: mv643xx_eth: proper initialization for Kirkwood SoCs   Jason Cooper
      • [PATCH 2/2] net: mv643xx_eth: proper initialization for Kirkwood SoCs   Jason Gunthorpe
      • [PATCH 2/2] net: mv643xx_eth: proper initialization for Kirkwood SoCs   Jason Cooper
      • [PATCH 2/2] net: mv643xx_eth: proper initialization for Kirkwood SoCs   Jason Gunthorpe
      • [PATCH 2/2] net: mv643xx_eth: proper initialization for Kirkwood SoCs   Jason Cooper
      • [PATCH 2/2] net: mv643xx_eth: proper initialization for Kirkwood SoCs   Andrew Lunn
      • [PATCH 2/2] net: mv643xx_eth: proper initialization for Kirkwood SoCs   Jason Cooper
      • [PATCH 2/2] net: mv643xx_eth: proper initialization for Kirkwood SoCs   Jason Gunthorpe
      • [PATCH 2/2] net: mv643xx_eth: proper initialization for Kirkwood SoCs   Jason Cooper
      • [PATCH 2/2] net: mv643xx_eth: proper initialization for Kirkwood SoCs   Sebastian Hesselbarth
      • [PATCH 2/2] net: mv643xx_eth: proper initialization for Kirkwood SoCs   Linus Walleij
      • [PATCH 2/2] net: mv643xx_eth: proper initialization for Kirkwood SoCs   Jason Cooper
      • [PATCH 2/2] net: mv643xx_eth: proper initialization for Kirkwood SoCs   Russell King - ARM Linux
      • [PATCH 2/2] net: mv643xx_eth: proper initialization for Kirkwood SoCs   Sebastian Hesselbarth
      • [PATCH 2/2] net: mv643xx_eth: proper initialization for Kirkwood SoCs   Jason Cooper
      • [PATCH 1/2] ARM: kirkwood: proper retain MAC address workaround on DT ethernet   David Miller
      • [PATCH 1/2] ARM: kirkwood: proper retain MAC address workaround on DT ethernet   Sebastian Hesselbarth
      • [PATCH 1/2] ARM: kirkwood: proper retain MAC address workaround on DT ethernet   David Miller
      • [PATCH 1/2] ARM: kirkwood: proper retain MAC address workaround on DT ethernet   Benjamin Herrenschmidt
      • [PATCH 1/2] ARM: kirkwood: proper retain MAC address workaround on DT ethernet   Sebastian Hesselbarth
      • [PATCH 1/2] ARM: kirkwood: proper retain MAC address workaround on DT ethernet   Benjamin Herrenschmidt
      • [PATCH 1/2] ARM: kirkwood: proper retain MAC address workaround on DT ethernet   Arnd Bergmann
      • [PATCH 1/2] ARM: kirkwood: proper retain MAC address workaround on DT ethernet   Benjamin Herrenschmidt
      • [PATCH 1/2] ARM: kirkwood: proper retain MAC address workaround on DT ethernet   Sebastian Hesselbarth
      • [PATCH 1/2] ARM: kirkwood: proper retain MAC address workaround on DT ethernet   David Miller
      • [PATCH 1/2] ARM: kirkwood: proper retain MAC address workaround on DT ethernet   David Miller
      • [PATCH 1/2] ARM: kirkwood: proper retain MAC address workaround on DT ethernet   Benjamin Herrenschmidt
      • [PATCH 1/2] ARM: kirkwood: proper retain MAC address workaround on DT ethernet   Benjamin Herrenschmidt
    • [PATCH v5 00/13] net: mv643xx_eth DT support and fixes   Sebastian Hesselbarth
      • [PATCH v5 02/13] net: mv643xx_eth: use managed devm_ioremap for port registers   Sebastian Hesselbarth
      • [PATCH v5 03/13] net: mv643xx_eth: add phy_node to platform_data struct   Sebastian Hesselbarth
      • [PATCH v5 04/13] net: mv643xx_eth: use of_phy_connect if phy_node present   Sebastian Hesselbarth
      • [PATCH v5 05/13] net: mv643xx_eth: proper initialization for Kirkwood SoCs   Sebastian Hesselbarth
      • [PATCH v5 06/13] net: mv643xx_eth: add DT parsing support   Sebastian Hesselbarth
      • [PATCH v5 07/13] ARM: dove: add gigabit ethernet and mvmdio device tree nodes   Sebastian Hesselbarth
      • [PATCH v5 08/13] ARM: kirkwood: add gigabit ethernet and mvmdio device tree nodes   Sebastian Hesselbarth
      • [PATCH v5 09/13] ARM: orion5x: add gigabit ethernet and mvmdio device tree nodes   Sebastian Hesselbarth
      • [PATCH v5 10/13] ARM: dove: remove legacy mv643xx_eth setup   Sebastian Hesselbarth
      • [PATCH v5 11/13] ARM: kirkwood: remove legacy clk alias for mv643xx_eth   Sebastian Hesselbarth
      • [PATCH v5 12/13] ARM: kirkwood: remove redundant DT board files   Sebastian Hesselbarth
      • [PATCH v5 12/13] ARM: kirkwood: remove redundant DT board files   Arnaud Ebalard
      • [PATCH v5 12/13] ARM: kirkwood: remove redundant DT board files   Sebastian Hesselbarth
      • [PATCH v5 12/13] ARM: kirkwood: remove redundant DT board files   Jason Cooper
      • [PATCH v5 12/13] ARM: kirkwood: remove redundant DT board files   Arnaud Ebalard
      • [PATCH v5 12/13] ARM: kirkwood: remove redundant DT board files   Jason Cooper
      • [PATCH v5 13/13] ARM: orion5x: remove legacy mv643xx_eth board setup   Sebastian Hesselbarth
      • [PATCH v5 00/13] net: mv643xx_eth DT support and fixes   David Miller
      • [PATCH v5 00/13] net: mv643xx_eth DT support and fixes   Sebastian Hesselbarth
      • [PATCH v5 00/13] net: mv643xx_eth DT support and fixes   David Miller
    • [PATCH v5 01/13] net: mv643xx_eth: use phy_disconnect instead of phy_detach   Sebastian Hesselbarth
      • [PATCH v5 01/13] net: mv643xx_eth: use phy_disconnect instead of phy_detach   Jason Cooper
• [PATCH 1/3] ARM: tegra: pcie: Add tegra3 support   Stephen Warren
• [PATCH] ARM: tegra: disable LP2 cpuidle state if PCIe is enabled   Stephen Warren
  • [PATCH] ARM: tegra: disable LP2 cpuidle state if PCIe is enabled   Thierry Reding
  • [PATCH] ARM: tegra: disable LP2 cpuidle state if PCIe is enabled   Peter De Schrijver
    • [PATCH] ARM: tegra: disable LP2 cpuidle state if PCIe is enabled   Thierry Reding
      • [PATCH] ARM: tegra: disable LP2 cpuidle state if PCIe is enabled   Stephen Warren
      • [PATCH] ARM: tegra: disable LP2 cpuidle state if PCIe is enabled   Peter De Schrijver
      • [PATCH] ARM: tegra: disable LP2 cpuidle state if PCIe is enabled   Thierry Reding
      • [PATCH] ARM: tegra: disable LP2 cpuidle state if PCIe is enabled   Stephen Warren
  • [PATCH] ARM: tegra: disable LP2 cpuidle state if PCIe is enabled   Daniel Lezcano
    • [PATCH] ARM: tegra: disable LP2 cpuidle state if PCIe is enabled   Stephen Warren
• [RESEND][PATCH 1/3] arm: dts: introduce config HAS_BANDGAP   Eduardo Valentin
  • [RESEND][PATCH 1/3] arm: dts: introduce config HAS_BANDGAP   Stephen Warren
    • [RESEND][PATCH 1/3] arm: dts: introduce config HAS_BANDGAP   Eduardo Valentin
  • [RESEND][PATCH 1/3] arm: dts: introduce config HAS_BANDGAP   Aaro Koskinen
    • [RESEND][PATCH 1/3] arm: dts: introduce config HAS_BANDGAP   Jason Gunthorpe
      • [RESEND][PATCH 1/3] arm: dts: introduce config HAS_BANDGAP   Eduardo Valentin
      • [RESEND][PATCH 1/3] arm: dts: introduce config HAS_BANDGAP   Jason Gunthorpe
      • [RESEND][PATCH 1/3] arm: dts: introduce config HAS_BANDGAP   Eduardo Valentin
      • [RESEND][PATCH 1/3] arm: dts: introduce config HAS_BANDGAP   Jason Gunthorpe
      • [RESEND][PATCH 1/3] arm: dts: introduce config HAS_BANDGAP   Aaro Koskinen
      • [RESEND][PATCH 1/3] arm: dts: introduce config HAS_BANDGAP   Tomi Valkeinen
    • [RESEND][PATCH 1/3] arm: dts: introduce config HAS_BANDGAP   Eduardo Valentin
• [RESEND][PATCH 2/3] arm: dts: add bandgap entry for OMAP443x devices   Eduardo Valentin
• [RESEND][PATCH 3/3] arm: add bandgap entry for OMAP4460 devices   Eduardo Valentin
• [PATCH 0/2] ARM: tegra: a couple clock bug-fixes   Stephen Warren
  • [PATCH 1/2] clk: tegra: remove USB from clk init table   Stephen Warren
  • [PATCH 2/2] clk: tegra: add ac97 controller clock   Stephen Warren
  • [PATCH 0/2] ARM: tegra: a couple clock bug-fixes   Olof Johansson
    • [PATCH 0/2] ARM: tegra: a couple clock bug-fixes   Stephen Warren
• [PATCH] clk: remove clock notifier at unregister   Mike Turquette
• [PATCH] pinctrl: dove: add PMU functions to pinctrl   Sebastian Hesselbarth
  • [PATCH] pinctrl: dove: add PMU functions to pinctrl   Jason Cooper
    • [PATCH] pinctrl: dove: add PMU functions to pinctrl   Sebastian Hesselbarth
      • [PATCH] pinctrl: dove: add PMU functions to pinctrl   Jason Cooper
  • [PATCH] pinctrl: dove: add PMU functions to pinctrl   Linus Walleij
• [GIT PULL] Urgent omap timer fix for current merge window   Tony Lindgren
  • [GIT PULL] Urgent omap timer fix for current merge window   Russell King - ARM Linux
    • [GIT PULL] Urgent omap timer fix for current merge window   Tony Lindgren
  • [GIT PULL] Urgent omap timer fix for current merge window   Arnd Bergmann
    • [GIT PULL] Urgent omap timer fix for current merge window   Tony Lindgren
• [PATCH 2/2] rtc: pxa: add pxa95x rtc support   Haojian Zhuang
• [PATCH v2 2/2] dma: imx-sdma: move to generic device tree bindings   Shawn Guo
• [PATCH] ARM: dts: Correct the base address of pinctrl_3   Padmavathi Venna
  • [PATCH] ARM: dts: Correct the base address of pinctrl_3   Sascha Hauer
    • [PATCH] ARM: dts: Correct the base address of pinctrl_3   Padma Venkat
• [PATCH] ASoC: Samsung: i2s: Fix crash in i2s driver   Padmavathi Venna
  • [PATCH] ASoC: Samsung: i2s: Fix crash in i2s driver   Mark Brown
  • [PATCH] ASoC: Samsung: i2s: Fix crash in i2s driver   Tomasz Figa
    • [PATCH] ASoC: Samsung: i2s: Fix crash in i2s driver   Padma Venkat
• [RFC PATCH V2] ARM: EXYNOS: Fix hotplug when CPUs boot in HYP mode   giridhar.maruthy at linaro.org
  • [RFC PATCH V2] ARM: EXYNOS: Fix hotplug when CPUs boot in HYP mode   Giridhar Maruthy
    • [RFC PATCH V2] ARM: EXYNOS: Fix hotplug when CPUs boot in HYP mode   Marc Zyngier
      • [RFC PATCH V2] ARM: EXYNOS: Fix hotplug when CPUs boot in HYP mode   Giridhar Maruthy
      • [RFC PATCH V2] ARM: EXYNOS: Fix hotplug when CPUs boot in HYP mode   Marc Zyngier
• [PATCH] ARM: samsung: use #include for all device trees   Padmavathi Venna
• [PATCH V2 0/3] clk: Samsung: audss: Register audio subsytem clocks using common clk framework   Padmavathi Venna
  • [PATCH V2 1/3] clk: samsung: register audio subsystem clocks using common clock framework   Padmavathi Venna
    • [PATCH V2 1/3] clk: samsung: register audio subsystem clocks using common clock framework   Tomasz Figa
      • [PATCH V2 1/3] clk: samsung: register audio subsystem clocks using common clock framework   Padma Venkat
      • [PATCH V2 1/3] clk: samsung: register audio subsystem clocks using common clock framework   Sylwester Nawrocki
  • [PATCH V2 2/3] ARM: dts: add Exynos audio subsystem clock controller node   Padmavathi Venna
    • [PATCH V2 2/3] ARM: dts: add Exynos audio subsystem clock controller node   Tomasz Figa
      • [PATCH V2 2/3] ARM: dts: add Exynos audio subsystem clock controller node   Padma Venkat
  • [PATCH V2 3/3] ARM: dts: add clock provider information for i2s controllers in Exynos5250   Padmavathi Venna
  • [PATCH V2 0/3] clk: Samsung: audss: Register audio subsytem clocks using common clk framework   Tomasz Figa
• [PATCH 1/3] ARM: dts: imx6q: remove the unused pins for gpmi-nand   Huang Shijie
  • [PATCH 1/3] ARM: dts: imx6q: remove the unused pins for gpmi-nand   Shawn Guo
• [PATCH 2/3] ARM: dts: imx6dl: add pinctrl for gpmi-nand   Huang Shijie
• [PATCH 3/3] ARM: dts: enable the gpmi-nand for imx6q{dl}-sabreauto boards   Huang Shijie
• [PATCH 1/2] clk: si5351: Fix msynth_recalc_rate return value when fOUT is 0.   Marek Belisko
  • [PATCH 2/2] clk: si5351: Powerdown output when clock rate is 0.   Marek Belisko
    • [PATCH 2/2] clk: si5351: Powerdown output when clock rate is 0.   Sebastian Hesselbarth
      • [PATCH 2/2] clk: si5351: Powerdown output when clock rate is 0.   Marek Belisko
  • [PATCH 1/2] clk: si5351: Fix msynth_recalc_rate return value when fOUT is 0.   Sebastian Hesselbarth
    • [PATCH 1/2] clk: si5351: Fix msynth_recalc_rate return value when fOUT is 0.   Marek Belisko
• How does commit 47ec340c not introduce a bug?   Robin Holt
  • How does commit 47ec340c not introduce a bug?   Uwe Kleine-König
    • How does commit 47ec340c not introduce a bug?   Haojian Zhuang
      • How does commit 47ec340c not introduce a bug?   Robin Holt
      • How does commit 47ec340c not introduce a bug?   Samuel Ortiz
• [PATCH] proc: Use PDE attribute setting accessor functions   Geert Uytterhoeven
  • [PATCH] proc: Use PDE attribute setting accessor functions   David Howells
  • [PATCH] proc: Use PDE attribute setting accessor functions   Jesper Nilsson
• [PATCH 0/2] ARM: OMAP AM33XX: clock data: Enable clkout2 output on SoC pad   Vaibhav Hiremath
  • [PATCH 1/2] ARM: OMAP AM33XX: clock data: Enable clkout2 as part of init   Vaibhav Hiremath
    • [PATCH 1/2] ARM: OMAP AM33XX: clock data: Enable clkout2 as part of init   Paul Walmsley
      • [PATCH 1/2] ARM: OMAP AM33XX: clock data: Enable clkout2 as part of init   Hiremath, Vaibhav
  • [PATCH 2/2] ARM: dts: AM33XX: Set pinmux for clkout2 pad used for clock output   Vaibhav Hiremath
    • [PATCH 2/2] ARM: dts: AM33XX: Set pinmux for clkout2 pad used for clock output   Paul Walmsley
      • [PATCH 2/2] ARM: dts: AM33XX: Set pinmux for clkout2 pad used for clock output   Hiremath, Vaibhav
  • [PATCH 0/2] ARM: OMAP AM33XX: clock data: Enable clkout2 output on SoC pad   Hiremath, Vaibhav
    • [PATCH 0/2] ARM: OMAP AM33XX: clock data: Enable clkout2 output on SoC pad   Paul Walmsley
      • [PATCH 0/2] ARM: OMAP AM33XX: clock data: Enable clkout2 output on SoC pad   Hiremath, Vaibhav
      • [PATCH 0/2] ARM: OMAP AM33XX: clock data: Enable clkout2 output on SoC pad   Benoit Cousson
      • [PATCH 0/2] ARM: OMAP AM33XX: clock data: Enable clkout2 output on SoC pad   Paul Walmsley
• [RFC PATCH 0/2] USB: OHCI: Start splitting up the driver   Manjunath Goudar
  • [RFC PATCH 1/2] USB: OHCI: prepare to make ohci-hcd a library module   Manjunath Goudar
    • [RFC PATCH 1/2] USB: OHCI: prepare to make ohci-hcd a library module   Alan Stern
      • [RFC PATCH 1/2] USB: OHCI: prepare to make ohci-hcd a library module   Arnd Bergmann
      • [RFC PATCH 1/2] USB: OHCI: prepare to make ohci-hcd a library module   Alan Stern
  • [RFC PATCH 2/2] USB: OHCI: make ohci-pci a separate driver   Manjunath Goudar
  • [RFC PATCH 0/2] USB: OHCI: Start splitting up the driver   Manjunath Goudar
    • [RFC PATCH 1/2] USB: OHCI: prepare to make ohci-hcd a library module   Manjunath Goudar
      • [RFC PATCH 1/2] USB: OHCI: prepare to make ohci-hcd a library module   Alan Stern
    • [RFC PATCH 2/2] USB: OHCI: make ohci-pci a separate driver   Manjunath Goudar
• [PATCH] usb: gadget: s3c2410_udc: fix error return code in s3c2410_udc_probe()   Wei Yongjun
  • [PATCH] usb: gadget: s3c2410_udc: fix error return code in s3c2410_udc_probe()   Jingoo Han
• [PATCH] [ARM] rpc: acornscsi: fix error return code in acornscsi_probe()   Wei Yongjun
• [GIT PULL] hwspinlock for 3.10   Ohad Ben-Cohen
• [GIT PULL] rpmsg for 3.10   Ohad Ben-Cohen
• [GIT PULL] remoteproc for 3.10   Ohad Ben-Cohen
• [PATCH] ARM: KVM: prevent NULL pointer dereference with KVM ioctl   Andre Przywara
  • [PATCH] ARM: KVM: prevent NULL pointer dereference with KVM ioctl   Marc Zyngier
    • [PATCH] ARM: KVM: prevent NULL pointer dereference with KVM ioctl   Christoffer Dall
      • [PATCH] ARM: KVM: prevent NULL pointer dereference with KVM ioctl   Christoffer Dall
• MVNETA irq with backport-3.8   Greg
  • MVNETA irq with backport-3.8   Maxime Ripard
    • MVNETA irq with backport-3.8   Greg
  • MVNETA irq with backport-3.8   Thomas Petazzoni
    • MVNETA irq with backport-3.8   Greg
    • MVNETA irq with backport-3.8   Greg
      • MVNETA irq with backport-3.8   Gregory CLEMENT
      • MVNETA irq with backport-3.8   Willy Tarreau
      • MVNETA irq with backport-3.8   Gregory CLEMENT
      • MVNETA irq with backport-3.8   Willy Tarreau
      • MVNETA irq with backport-3.8   Greg
      • MVNETA irq with backport-3.8   Willy Tarreau
• [PATCH -v8 00/11] Shutdown from reboot_cpuid without stopping other cpus.   Robin Holt
  • [PATCH -v8 01/11] CPU hotplug: Provide a generic helper to disable/enable CPU hotplug   Robin Holt
    • [PATCH -v8 01/11] CPU hotplug: Provide a generic helper to disable/enable CPU hotplug   Andrew Morton
      • [PATCH -v8 01/11] CPU hotplug: Provide a generic helper to disable/enable CPU hotplug   Rafael J. Wysocki
      • [PATCH -v8 01/11] CPU hotplug: Provide a generic helper to disable/enable CPU hotplug   Andrew Morton
      • [PATCH -v8 01/11] CPU hotplug: Provide a generic helper to disable/enable CPU hotplug   Robin Holt
      • [PATCH -v8 01/11] CPU hotplug: Provide a generic helper to disable/enable CPU hotplug   Srivatsa S. Bhat
      • [PATCH -v8 01/11] CPU hotplug: Provide a generic helper to disable/enable CPU hotplug   Robin Holt
  • [PATCH -v8 02/11] Migrate shutdown/reboot to boot cpu.   Robin Holt
  • [PATCH -v8 03/11] Remove -stable friendly PF_THREAD_BOUND define   Robin Holt
  • [PATCH -v8 04/11] Move shutdown/reboot related functions to kernel/reboot.c   Robin Holt
  • [PATCH -v8 05/11] checkpatch.pl the new kernel/reboot.c file.   Robin Holt
  • [PATCH -v8 06/11] x86, prepare reboot_mode for moving to generic kernel code.   Robin Holt
  • [PATCH -v8 07/11] unicore32, prepare reboot_mode for moving to generic kernel code.   Robin Holt
  • [PATCH -v8 08/11] arm, Remove unused restart_mode fields from some arm subarchs   Robin Holt
  • [PATCH -v8 09/11] arm, prepare reboot_mode for moving to generic kernel code.   Robin Holt
  • [PATCH -v8 10/11] arm, change reboot_mode to use enum reboot_mode   Robin Holt
  • [PATCH -v8 11/11] Move arch/x86 reboot= handling to generic kernel.   Robin Holt
    • [PATCH -v8 11/11] Move arch/x86 reboot= handling to generic kernel.   Ingo Molnar
      • [PATCH -v8 11/11] Move arch/x86 reboot= handling to generic kernel.   Russell King - ARM Linux
      • [PATCH -v8 11/11] Move arch/x86 reboot= handling to generic kernel.   H. Peter Anvin
      • [PATCH -v8 11/11] Move arch/x86 reboot= handling to generic kernel.   Robin Holt
      • [PATCH -v8 11/11] Move arch/x86 reboot= handling to generic kernel.   Robin Holt
      • [PATCH -v8 11/11] Move arch/x86 reboot= handling to generic kernel.   Russell King - ARM Linux
      • [PATCH -v8 11/11] Move arch/x86 reboot= handling to generic kernel.   Robin Holt
    • [PATCH -v8 11/11] Move arch/x86 reboot= handling to generic kernel.   Russell King - ARM Linux
      • [PATCH -v8 11/11] Move arch/x86 reboot= handling to generic kernel.   Robin Holt
    • [PATCH -v8 11/11] Move arch/x86 reboot= handling to generic kernel.   Andrew Morton
      • [PATCH -v8 11/11] Move arch/x86 reboot= handling to generic kernel.   Robin Holt
  • [PATCH -v8 00/11] Shutdown from reboot_cpuid without stopping other cpus.   Robin Holt
    • [PATCH -v9 01/11] CPU hotplug: Provide a generic helper to disable/enable CPU hotplug   Robin Holt
    • [PATCH -v9 02/11] Migrate shutdown/reboot to boot cpu.   Robin Holt
    • [PATCH -v9 03/11] Remove -stable friendly PF_THREAD_BOUND define   Robin Holt
    • [PATCH -v9 04/11] Move shutdown/reboot related functions to kernel/reboot.c   Robin Holt
      • [PATCH -v9 04/11] Move shutdown/reboot related functions to kernel/reboot.c   Andrew Morton
      • [PATCH -v9 04/11] Move shutdown/reboot related functions to kernel/reboot.c   Robin Holt
      • [PATCH -v9 04/11] Move shutdown/reboot related functions to kernel/reboot.c   Robin Holt
    • [PATCH -v9 05/11] checkpatch.pl the new kernel/reboot.c file.   Robin Holt
    • [PATCH -v9 06/11] x86, prepare reboot_mode for moving to generic kernel code.   Robin Holt
    • [PATCH -v9 07/11] unicore32, prepare reboot_mode for moving to generic kernel code.   Robin Holt
      • [PATCH -v9 07/11] unicore32, prepare reboot_mode for moving to generic kernel code.   Xuetao Guan
    • [PATCH -v9 08/11] arm, Remove unused restart_mode fields from some arm subarchs   Robin Holt
    • [PATCH -v9 09/11] arm, prepare reboot_mode for moving to generic kernel code.   Robin Holt
    • [PATCH -v9 10/11] arm, change reboot_mode to use enum reboot_mode   Robin Holt
    • [PATCH -v9 11/11] Move arch/x86 reboot= handling to generic kernel.   Robin Holt
    • [PATCH -v8 00/11] Shutdown from reboot_cpuid without stopping other cpus.   Ingo Molnar
• [PATCH v9 0/3] of/pci: Provide common support for PCI DT parsing   Andrew Murray
  • [PATCH v9 1/3] of/pci: Provide support for parsing PCI DT ranges property   Andrew Murray
  • [PATCH v9 2/3] of/pci: mips: convert to common of_pci_range_parser   Andrew Murray
  • [PATCH v9 3/3] of/pci: microblaze: convert to common of_pci_range_parser   Andrew Murray
• [RFC PATCH] Alternative clk gate ctrl for Kirkwood variants   Valentin Longchamp
  • [PATCH 1/3] clk: mvebu: add gate ctrl for Prestera kirkwood variants   Valentin Longchamp
    • [PATCH 1/3] clk: mvebu: add gate ctrl for Prestera kirkwood variants   Gregory CLEMENT
      • [PATCH 1/3] clk: mvebu: add gate ctrl for Prestera kirkwood variants   Andrew Lunn
      • [PATCH 1/3] clk: mvebu: add gate ctrl for Prestera kirkwood variants   Sebastian Hesselbarth
      • [PATCH 1/3] clk: mvebu: add gate ctrl for Prestera kirkwood variants   Valentin Longchamp
      • [PATCH 1/3] clk: mvebu: add gate ctrl for Prestera kirkwood variants   Sebastian Hesselbarth
      • [PATCH 1/3] clk: mvebu: add gate ctrl for Prestera kirkwood variants   Jason Cooper
  • [PATCH 2/3] ARM: kirkwood: look for alternative gate ctrl of node   Valentin Longchamp
  • [PATCH 3/3] ARM: kirkwood: remove clock gating disabling for km_kirkwood   Valentin Longchamp
    • [PATCH 3/3] ARM: kirkwood: remove clock gating disabling for km_kirkwood   Jason Cooper
• [GIT PULL] ARM: Third batch of arm-soc changes for 3.10   Arnd Bergmann
  • [GIT PULL] ARM: arm-soc device tree changes, part 2   Arnd Bergmann
  • [GIT PULL] ARM: arm-soc: late cleanups   Arnd Bergmann
  • [GIT PULL] ARM: arm-soc: late Exynos multiplatform changes   Arnd Bergmann
  • [GIT PULL] ARM: Third batch of arm-soc changes for 3.10   Linus Torvalds
    • [GIT PULL] ARM: Third batch of arm-soc changes for 3.10   Arnd Bergmann
    • [GIT PULL] ARM: Third batch of arm-soc changes for 3.10   Russell King - ARM Linux
      • [GIT PULL] ARM: Third batch of arm-soc changes for 3.10   Arnd Bergmann
      • [GIT PULL] ARM: Third batch of arm-soc changes for 3.10   Linus Torvalds
• [GIT PULL] ARM: arm-soc platform updates for 3.10, part 2   Arnd Bergmann
• [GIT PULL] ARM: arm-soc platform updates for 3.10, part 3   Arnd Bergmann
• [PATCH v3 07/32] arm64: KVM: fault injection into a guest   Marc Zyngier
• [PATCH v3 30/32] arm64: KVM: enable initialization of a 32bit vcpu   Marc Zyngier
  • [PATCH v3 30/32] arm64: KVM: enable initialization of a 32bit vcpu   Christoffer Dall
    • [PATCH v3 30/32] arm64: KVM: enable initialization of a 32bit vcpu   Peter Maydell
      • [PATCH v3 30/32] arm64: KVM: enable initialization of a 32bit vcpu   Christoffer Dall
      • [PATCH v3 30/32] arm64: KVM: enable initialization of a 32bit vcpu   Peter Maydell
    • [PATCH v3 30/32] arm64: KVM: enable initialization of a 32bit vcpu   Marc Zyngier
      • [PATCH v3 30/32] arm64: KVM: enable initialization of a 32bit vcpu   Christoffer Dall
• [GIT PULL 0/5] ARM: Third batch of arm-soc changes for 3.10, again   Arnd Bergmann
  • [GIT PULL 1/5] ARM: arm-soc platform updates for 3.10, part 2   Arnd Bergmann
  • [GIT PULL 2/5] ARM: arm-soc platform updates for 3.10, part 3   Arnd Bergmann
  • [GIT PULL 3/5] ARM: arm-soc device tree changes, part 2   Arnd Bergmann
  • [GIT PULL 4/5] ARM: arm-soc: late cleanups   Arnd Bergmann
    • [GIT PULL 4/5] ARM: arm-soc: late cleanups   Tony Lindgren
      • [GIT PULL 4/5] ARM: arm-soc: late cleanups   Linus Torvalds
      • [GIT PULL 4/5] ARM: arm-soc: late cleanups   Tony Lindgren
      • [GIT PULL 4/5] ARM: arm-soc: late cleanups   Linus Torvalds
      • [GIT PULL 4/5] ARM: arm-soc: late cleanups   Olof Johansson
  • [GIT PULL 5/5] ARM: arm-soc: late Exynos multiplatform changes   Arnd Bergmann
  • [GIT PULL 0/5] ARM: Third batch of arm-soc changes for 3.10, again   Linus Torvalds
    • [GIT PULL 0/5] ARM: Third batch of arm-soc changes for 3.10, again   Arnd Bergmann
• [PATCH v6 3/3] ARM: shmobile: BOCK-W: add USB support   Sergei Shtylyov
• [PATCH 1/1] ARM: at91: at91sam9x25ek: fix model name   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/1] ARM: at91: at91sam9x25ek: fix model name   Nicolas Ferre
• [PATCH] documentation: iommu: add description of ARM System MMU binding   Olav Haugan
  • [PATCH] documentation: iommu: add description of ARM System MMU binding   Andreas Herrmann
    • [PATCH] documentation: iommu: add description of ARM System MMU binding   Will Deacon
• [PATCHv3] arm: Preserve the user r/w register TPIDRURW on context switch and fork   André Hentschel
  • [PATCHv3] arm: Preserve the user r/w register TPIDRURW on context switch and fork   Will Deacon
    • [PATCHv3] arm: Preserve the user r/w register TPIDRURW on context switch and fork   André Hentschel
• [PATCH] clk: Always notify whole subtree when reparenting   Mike Turquette
  • [PATCH] clk: Always notify whole subtree when reparenting   Sören Brinkmann
• [PATCH] ARM: OMAP2+: omap_device: use late_initcall_sync   Kevin Hilman
  • [PATCH] ARM: OMAP2+: omap_device: use late_initcall_sync   Tony Lindgren
• [PATCH] USB: set device dma_mask without reference to global data   Stephen Warren
  • [PATCH] USB: set device dma_mask without reference to global data   Greg Kroah-Hartman
    • [PATCH] USB: set device dma_mask without reference to global data   Arnd Bergmann
      • [PATCH] USB: set device dma_mask without reference to global data   Alan Stern
      • [PATCH] USB: set device dma_mask without reference to global data   Arnd Bergmann
      • [PATCH] USB: set device dma_mask without reference to global data   Russell King - ARM Linux
  • [PATCH] USB: set device dma_mask without reference to global data   Peter Chen
    • [PATCH] USB: set device dma_mask without reference to global data   Stephen Warren
      • [PATCH] USB: set device dma_mask without reference to global data   Peter Chen
      • [PATCH] USB: set device dma_mask without reference to global data   Matthijs Kooijman
      • [PATCH] USB: set device dma_mask without reference to global data   Matthijs Kooijman
      • [PATCH] USB: set device dma_mask without reference to global data   Rob Herring
      • [PATCH] USB: set device dma_mask without reference to global data   Arnd Bergmann
      • [PATCH] USB: set device dma_mask without reference to global data   Arnd Bergmann
      • [PATCH] USB: set device dma_mask without reference to global data   Russell King - ARM Linux
      • [PATCH] USB: set device dma_mask without reference to global data   Stephen Warren
      • [PATCH] USB: set device dma_mask without reference to global data   Russell King - ARM Linux
  • [PATCH] USB: set device dma_mask without reference to global data   Tony Prisk
• надобны наличности   Олег Владимирович
• [PATCHv2 0/2] Add support for the Solomon SSD1306 OLED Controller   Tomi Valkeinen
• [PATCH 0/4] drivers: video: Optimisations for the ssd1307fb driver   Tomi Valkeinen
• [PATCH] ARM: OMAP3+: am33xx id: Add new am33xx specific function to check dev_feature   Vaibhav Hiremath
  • [PATCH] ARM: OMAP3+: am33xx id: Add new am33xx specific function to check dev_feature   Kevin Hilman
    • [PATCH] ARM: OMAP3+: am33xx id: Add new am33xx specific function to check dev_feature   Hiremath, Vaibhav
• [PATCH] ARM: imx: fix build breakage in hotplug.c   Uwe Kleine-König
  • [PATCH] ARM: imx: fix build breakage in hotplug.c   Uwe Kleine-König
• [PATCH] ARM: ux500: update MSP1 pinctrl defintions   Fabio Baltieri
  • [PATCH] ARM: ux500: update MSP1 pinctrl defintions   Mark Brown
  • [PATCH] ARM: ux500: update MSP1 pinctrl defintions   Linus Walleij
    • [PATCH] ARM: ux500: update MSP1 pinctrl defintions   Fabio Baltieri
• [RFC PATCH v2 00/11] HugeTLB and THP support for ARM64.   Steve Capper
  • [RFC PATCH v2 01/11] mm: hugetlb: Copy huge_pmd_share from x86 to mm.   Steve Capper
  • [RFC PATCH v2 02/11] x86: mm: Remove x86 version of huge_pmd_share.   Steve Capper
  • [RFC PATCH v2 03/11] mm: hugetlb: Copy general hugetlb code from x86 to mm.   Steve Capper
  • [RFC PATCH v2 04/11] x86: mm: Remove general hugetlb code from x86.   Steve Capper
  • [RFC PATCH v2 05/11] mm: thp: Correct the HPAGE_PMD_ORDER check.   Steve Capper
    • [RFC PATCH v2 05/11] mm: thp: Correct the HPAGE_PMD_ORDER check.   Kirill A. Shutemov
      • [RFC PATCH v2 05/11] mm: thp: Correct the HPAGE_PMD_ORDER check.   Steve Capper
  • [RFC PATCH v2 06/11] ARM64: mm: Restore memblock limit when map_mem finished.   Steve Capper
    • [RFC PATCH v2 06/11] ARM64: mm: Restore memblock limit when map_mem finished.   Catalin Marinas
  • [RFC PATCH v2 07/11] ARM64: mm: Make PAGE_NONE pages read only and no-execute.   Steve Capper
    • [RFC PATCH v2 07/11] ARM64: mm: Make PAGE_NONE pages read only and no-execute.   Will Deacon
      • [RFC PATCH v2 07/11] ARM64: mm: Make PAGE_NONE pages read only and no-execute.   Steve Capper
  • [RFC PATCH v2 08/11] ARM64: mm: Swap PTE_FILE and PTE_PROT_NONE bits.   Steve Capper
    • [RFC PATCH v2 08/11] ARM64: mm: Swap PTE_FILE and PTE_PROT_NONE bits.   Christopher Covington
      • [RFC PATCH v2 08/11] ARM64: mm: Swap PTE_FILE and PTE_PROT_NONE bits.   Steve Capper
    • [RFC PATCH v2 08/11] ARM64: mm: Swap PTE_FILE and PTE_PROT_NONE bits.   Will Deacon
      • [RFC PATCH v2 08/11] ARM64: mm: Swap PTE_FILE and PTE_PROT_NONE bits.   Steve Capper
    • [RFC PATCH v2 08/11] ARM64: mm: Swap PTE_FILE and PTE_PROT_NONE bits.   Catalin Marinas
  • [RFC PATCH v2 09/11] ARM64: mm: HugeTLB support.   Steve Capper
    • [RFC PATCH v2 09/11] ARM64: mm: HugeTLB support.   Catalin Marinas
      • [RFC PATCH v2 09/11] ARM64: mm: HugeTLB support.   Steve Capper
  • [RFC PATCH v2 10/11] ARM64: mm: Raise MAX_ORDER for 64KB pages and THP.   Steve Capper
    • [RFC PATCH v2 10/11] ARM64: mm: Raise MAX_ORDER for 64KB pages and THP.   Catalin Marinas
  • [RFC PATCH v2 11/11] ARM64: mm: THP support.   Steve Capper
    • [RFC PATCH v2 11/11] ARM64: mm: THP support.   Catalin Marinas
• [PATCH 1/4] ARM: tegra30: clocks: Fix pciex clock registration   Jay Agarwal
  • [PATCH 2/4] ARM: tegra: pcie: Add tegra3 support   Jay Agarwal
    • [PATCH 2/4] ARM: tegra: pcie: Add tegra3 support   Stephen Warren
  • [PATCH 3/4] ARM: dts: tegra: Correct PCIe entry   Jay Agarwal
    • [PATCH 3/4] ARM: dts: tegra: Correct PCIe entry   Stephen Warren
  • [PATCH 4/4] ARM: tegra: pcie: Enable PCIe controller on Cardhu   Jay Agarwal
    • [PATCH 4/4] ARM: tegra: pcie: Enable PCIe controller on Cardhu   Stephen Warren
      • [PATCH 4/4] ARM: tegra: pcie: Enable PCIe controller on Cardhu   Stephen Warren
      • [PATCH 4/4] ARM: tegra: pcie: Enable PCIe controller on Cardhu   Jay Agarwal
      • [PATCH 4/4] ARM: tegra: pcie: Enable PCIe controller on Cardhu   Jay Agarwal
      • [PATCH 4/4] ARM: tegra: pcie: Enable PCIe controller on Cardhu   Stephen Warren
      • [PATCH 4/4] ARM: tegra: pcie: Enable PCIe controller on Cardhu   Jay Agarwal
      • [PATCH 4/4] ARM: tegra: pcie: Enable PCIe controller on Cardhu   Stephen Warren
      • [PATCH 4/4] ARM: tegra: pcie: Enable PCIe controller on Cardhu   Jay Agarwal
      • [PATCH 4/4] ARM: tegra: pcie: Enable PCIe controller on Cardhu   Stephen Warren
  • [PATCH 1/4] ARM: tegra30: clocks: Fix pciex clock registration   Stephen Warren
• Problem in mounting flat filesystem with Kernel v3.9   Amit Virdi
• [PATCH 0/3] Xen ARM fixes for 3.10-RC1   Stefano Stabellini
  • [PATCH 1/3] xen/arm: initialize pm functions later   Stefano Stabellini
  • [PATCH 2/3] xen/arm: do not handle VCPUOP_register_vcpu_info failures   Stefano Stabellini
    • [PATCH 2/3] xen/arm: do not handle VCPUOP_register_vcpu_info failures   Ian Campbell
  • [PATCH 3/3] xen: rename xen_secondary_init and run it on every online cpu   Stefano Stabellini
• [RFC] Bug in ARM v6+ implementation of cmpxchg64() ?   Jaccon Bastiaansen
  • [RFC] Bug in ARM v6+ implementation of cmpxchg64() ?   Will Deacon
• [PATCH] ARM: shmobile: fix sleep-r8a7740.S miscompiles   Arnd Bergmann
  • [PATCH] ARM: shmobile: fix sleep-r8a7740.S miscompiles   Simon Horman
    • [PATCH] ARM: shmobile: fix sleep-r8a7740.S miscompiles   Simon Horman
• [PATCH 0/3] ARM: imx/mxs: fixes for 3.10-rc1   Shawn Guo
  • [PATCH 1/3] ARM: imx: compile fix for hotplug.c   Shawn Guo
  • [PATCH 2/3] ARM: imx: Select GENERIC_ALLOCATOR   Shawn Guo
  • [PATCH 3/3] video: mxsfb: Adapt to new videomode API   Shawn Guo
  • [PATCH 0/3] ARM: imx/mxs: fixes for 3.10-rc1   Olof Johansson
• [PATCH] irqchip: Add irqchip_init dummy function   Bastian Hecht
  • [PATCH] irqchip: Add irqchip_init dummy function   Sergei Shtylyov
    • [PATCH] irqchip: Add irqchip_init dummy function   Arnd Bergmann
      • [PATCH] irqchip: Add irqchip_init dummy function   Sergei Shtylyov
      • [PATCH] irqchip: Add irqchip_init dummy function   Simon Horman
• [PATCH 0/9] Important ux500 fixups due for the v3.10 -rc:s   Lee Jones
  • [PATCH 1/9] ARM: ux500: Remove duplicated assignment of ab8500_platdata   Lee Jones
    • [PATCH 1/9] ARM: ux500: Remove duplicated assignment of ab8500_platdata   Linus Walleij
  • [PATCH 2/9] mfd: ab8500-core: Use the correct driver name when enabling gpio/pinctrl   Lee Jones
    • [PATCH 2/9] mfd: ab8500-core: Use the correct driver name when enabling gpio/pinctrl   Linus Walleij
  • [PATCH 3/9] clk: ux500: Provide device enumeration number suffix for SMSC911x   Lee Jones
    • [PATCH 3/9] clk: ux500: Provide device enumeration number suffix for SMSC911x   Ulf Hansson
    • [PATCH 3/9] clk: ux500: Provide device enumeration number suffix for SMSC911x   Linus Walleij
      • [PATCH 3/9] clk: ux500: Provide device enumeration number suffix for SMSC911x   Lee Jones
    • [PATCH 3/9] clk: ux500: Provide device enumeration number suffix for SMSC911x   Mike Turquette
      • [PATCH 3/9] clk: ux500: Provide device enumeration number suffix for SMSC911x   Linus Walleij
      • [PATCH 3/9] clk: ux500: Provide device enumeration number suffix for SMSC911x   Lee Jones
  • [PATCH 4/9] mfd: db8500-prcmu: Supply the pdata_size attribute for db8500-thermal   Lee Jones
    • [PATCH 4/9] mfd: db8500-prcmu: Supply the pdata_size attribute for db8500-thermal   Linus Walleij
  • [PATCH 5/9] ARM: ux500: Fix incorrect DEBUG UART virtual addresses   Lee Jones
    • [PATCH 5/9] ARM: ux500: Fix incorrect DEBUG UART virtual addresses   Linus Walleij
  • [PATCH 6/9] ARM: ux500: Provide device enumeration number suffix for SMSC911x   Lee Jones
    • [PATCH 6/9] ARM: ux500: Provide device enumeration number suffix for SMSC911x   Linus Walleij
      • [PATCH 6/9] ARM: ux500: Provide device enumeration number suffix for SMSC911x   Lee Jones
  • [PATCH 7/9] pinctrl: abx500: Specify failed sub-driver by ID instead of driver_data   Lee Jones
    • [PATCH 7/9] pinctrl: abx500: Specify failed sub-driver by ID instead of driver_data   Linus Walleij
  • [PATCH 8/9] pinctrl: abx500: Rejiggle platform data and DT initialisation   Lee Jones
    • [PATCH 8/9] pinctrl: abx500: Rejiggle platform data and DT initialisation   Linus Walleij
      • [PATCH 8/9] pinctrl: abx500: Rejiggle platform data and DT initialisation   Lee Jones
      • [PATCH 8/9] pinctrl: abx500: Rejiggle platform data and DT initialisation   Linus Walleij
      • [PATCH 8/9] pinctrl: abx500: Rejiggle platform data and DT initialisation   Lee Jones
      • [PATCH 8/9] pinctrl: abx500: Rejiggle platform data and DT initialisation   Linus Walleij
  • [PATCH 9/9] mfd: ab8500-core: Pass GPADC compatible string to MFD core   Lee Jones
    • [PATCH 9/9] mfd: ab8500-core: Pass GPADC compatible string to MFD core   Linus Walleij
      • [PATCH 9/9] mfd: ab8500-core: Pass GPADC compatible string to MFD core   Lee Jones
      • [PATCH 9/9] mfd: ab8500-core: Pass GPADC compatible string to MFD core   Linus Walleij
      • [PATCH 9/9] mfd: ab8500-core: Pass GPADC compatible string to MFD core   Lee Jones
  • [PATCH 0/9] Important ux500 fixups due for the v3.10 -rc:s   Lee Jones
• [PATCH v3 0/4] xen/arm: CONFIG_PARAVIRT and stolen ticks accounting   Stefano Stabellini
  • [PATCH v3 1/4] xen: move xen_setup_runstate_info and get_runstate_snapshot to drivers/xen/time.c   Stefano Stabellini
    • [PATCH v3 1/4] xen: move xen_setup_runstate_info and get_runstate_snapshot to drivers/xen/time.c   Konrad Rzeszutek Wilk
      • [PATCH v3 1/4] xen: move xen_setup_runstate_info and get_runstate_snapshot to drivers/xen/time.c   Stefano Stabellini
      • [Xen-devel] [PATCH v3 1/4] xen: move xen_setup_runstate_info and get_runstate_snapshot to drivers/xen/time.c   Ian Campbell
  • [PATCH v3 2/4] kernel: missing include in cputime.c   Stefano Stabellini
  • [PATCH v3 3/4] arm: introduce CONFIG_PARAVIRT, PARAVIRT_TIME_ACCOUNTING and pv_time_ops   Stefano Stabellini
    • [PATCH v3 3/4] arm: introduce CONFIG_PARAVIRT, PARAVIRT_TIME_ACCOUNTING and pv_time_ops   Marc Zyngier
      • [PATCH v3 3/4] arm: introduce CONFIG_PARAVIRT, PARAVIRT_TIME_ACCOUNTING and pv_time_ops   Stefano Stabellini
  • [PATCH v3 4/4] xen/arm: account for stolen ticks   Stefano Stabellini
    • [PATCH v3 4/4] xen/arm: account for stolen ticks   Marc Zyngier
      • [PATCH v3 4/4] xen/arm: account for stolen ticks   Stefano Stabellini
      • [Xen-devel] [PATCH v3 4/4] xen/arm: account for stolen ticks   Ian Campbell
• [PATCH 2/2] ARM: dts: cfa10036: Change the OLED display to SSD1306   Shawn Guo
• [PATCH 1/4] ARM: cfa10036: dt: Change i2c0 clock frequency   Shawn Guo
• [RFC 0/8] ARM:STiH41x: Add STiH41x platform and board support   Srinivas KANDAGATLA
  • [RFC 2/8] ARM:global_timer: Add ARM global timer support.   Rob Herring
    • [RFC 2/8] ARM:global_timer: Add ARM global timer support.   Stuart MENEFY
  • [RFC 1/8] serial:st-asc: Add ST ASC driver.   Arnd Bergmann
    • [RFC 1/8] serial:st-asc: Add ST ASC driver.   Jean-Christophe PLAGNIOL-VILLARD
      • [RFC 1/8] serial:st-asc: Add ST ASC driver.   Srinivas KANDAGATLA
      • [RFC 1/8] serial:st-asc: Add ST ASC driver.   Arnd Bergmann
    • [RFC 1/8] serial:st-asc: Add ST ASC driver.   Greg KH
      • [RFC 1/8] serial:st-asc: Add ST ASC driver.   Jean-Christophe PLAGNIOL-VILLARD
      • [RFC 1/8] serial:st-asc: Add ST ASC driver.   Greg KH
      • [RFC 1/8] serial:st-asc: Add ST ASC driver.   Jean-Christophe PLAGNIOL-VILLARD
      • [RFC 1/8] serial:st-asc: Add ST ASC driver.   Greg KH
      • [RFC 1/8] serial:st-asc: Add ST ASC driver.   Arnd Bergmann
      • [RFC 1/8] serial:st-asc: Add ST ASC driver.   Greg KH
      • [RFC 1/8] serial:st-asc: Add ST ASC driver.   Russell King - ARM Linux
      • [RFC 1/8] serial:st-asc: Add ST ASC driver.   Jean-Christophe PLAGNIOL-VILLARD
      • [RFC 1/8] serial:st-asc: Add ST ASC driver.   Nicolas Pitre
      • [RFC 1/8] serial:st-asc: Add ST ASC driver.   Arnd Bergmann
      • [RFC 1/8] serial:st-asc: Add ST ASC driver.   Jean-Christophe PLAGNIOL-VILLARD
      • [RFC 1/8] serial:st-asc: Add ST ASC driver.   Stephen GALLIMORE
      • [RFC 1/8] serial:st-asc: Add ST ASC driver.   Ben Dooks
      • [RFC 1/8] serial:st-asc: Add ST ASC driver.   Greg KH
      • [RFC 1/8] serial:st-asc: Add ST ASC driver.   Ben Dooks
      • [RFC 1/8] serial:st-asc: Add ST ASC driver.   Stuart MENEFY
    • [RFC 1/8] serial:st-asc: Add ST ASC driver.   Srinivas KANDAGATLA
  • [RFC 2/8] ARM:global_timer: Add ARM global timer support.   Arnd Bergmann
    • [RFC 2/8] ARM:global_timer: Add ARM global timer support.   Will Deacon
      • [RFC 2/8] ARM:global_timer: Add ARM global timer support.   Stuart MENEFY
      • [RFC 2/8] ARM:global_timer: Add ARM global timer support.   Arnd Bergmann
    • [RFC 2/8] ARM:global_timer: Add ARM global timer support.   Steffen Trumtrar
    • [RFC 2/8] ARM:global_timer: Add ARM global timer support.   Srinivas KANDAGATLA
      • [RFC 2/8] ARM:global_timer: Add ARM global timer support.   Arnd Bergmann
      • [RFC 2/8] ARM:global_timer: Add ARM global timer support.   Srinivas KANDAGATLA
  • [RFC 3/8] mfd:syscon: Introduce claim/read/write/release APIs   Arnd Bergmann
    • [RFC 3/8] mfd:syscon: Introduce claim/read/write/release APIs   Mark Brown
      • [RFC 3/8] mfd:syscon: Introduce claim/read/write/release APIs   Srinivas KANDAGATLA
      • [RFC 3/8] mfd:syscon: Introduce claim/read/write/release APIs   Mark Brown
      • [RFC 3/8] mfd:syscon: Introduce claim/read/write/release APIs   Srinivas KANDAGATLA
      • [RFC 3/8] mfd:syscon: Introduce claim/read/write/release APIs   Mark Brown
      • [RFC 3/8] mfd:syscon: Introduce claim/read/write/release APIs   Srinivas KANDAGATLA
      • [RFC 3/8] mfd:syscon: Introduce claim/read/write/release APIs   Mark Brown
      • [RFC 3/8] mfd:syscon: Introduce claim/read/write/release APIs   Srinivas KANDAGATLA
      • [RFC 3/8] mfd:syscon: Introduce claim/read/write/release APIs   Srinivas KANDAGATLA
    • [RFC 3/8] mfd:syscon: Introduce claim/read/write/release APIs   Srinivas KANDAGATLA
      • [RFC 3/8] mfd:syscon: Introduce claim/read/write/release APIs   Arnd Bergmann
      • [RFC 3/8] mfd:syscon: Introduce claim/read/write/release APIs   Srinivas KANDAGATLA
      • [RFC 3/8] mfd:syscon: Introduce claim/read/write/release APIs   Arnd Bergmann
      • [RFC 3/8] mfd:syscon: Introduce claim/read/write/release APIs   Srinivas KANDAGATLA
      • [RFC 3/8] mfd:syscon: Introduce claim/read/write/release APIs   Arnd Bergmann
      • [RFC 3/8] mfd:syscon: Introduce claim/read/write/release APIs   Srinivas KANDAGATLA
  • [RFC 4/8] pinctrl:stixxxx: Add pinctrl and pinconf support.   Jean-Christophe PLAGNIOL-VILLARD
    • [RFC 4/8] pinctrl:stixxxx: Add pinctrl and pinconf support.   Srinivas KANDAGATLA
      • [RFC 4/8] pinctrl:stixxxx: Add pinctrl and pinconf support.   Jean-Christophe PLAGNIOL-VILLARD
  • [RFC 5/8] ARM:stih41x: Add STiH415 SOC support   Arnd Bergmann
    • [RFC 5/8] ARM:stih41x: Add STiH415 SOC support   Jean-Christophe PLAGNIOL-VILLARD
    • [RFC 5/8] ARM:stih41x: Add STiH415 SOC support   Stephen GALLIMORE
      • [RFC 5/8] ARM:stih41x: Add STiH415 SOC support   Arnd Bergmann
      • [RFC 5/8] ARM:stih41x: Add STiH415 SOC support   Stephen GALLIMORE
    • [RFC 5/8] ARM:stih41x: Add STiH415 SOC support   Srinivas KANDAGATLA
  • [RFC 7/8] ARM:stih41x: Add B2000 board support   Arnd Bergmann
    • [RFC 7/8] ARM:stih41x: Add B2000 board support   Jean-Christophe PLAGNIOL-VILLARD
    • [RFC 7/8] ARM:stih41x: Add B2000 board support   Srinivas KANDAGATLA
  • [RFC 2/8] ARM:global_timer: Add ARM global timer support.   Linus Walleij
    • [RFC 2/8] ARM:global_timer: Add ARM global timer support.   Thomas Gleixner
    • [RFC 2/8] ARM:global_timer: Add ARM global timer support.   Srinivas KANDAGATLA
      • [RFC 2/8] ARM:global_timer: Add ARM global timer support.   Linus Walleij
      • [RFC 2/8] ARM:global_timer: Add ARM global timer support.   Srinivas KANDAGATLA
  • [RFC 6/8] ARM:stih41x: Add STiH416 SOC support   Linus Walleij
• [PATCH] ARM v6/v7 cmpxchg64 shouldn't clear upper 32 bits of the old/new value   Will Deacon
  • [PATCH v2] ARM v6/v7 cmpxchg64 shouldn't clear upper 32 bits of the old/new value   Will Deacon
    • [PATCH v2] ARM v6/v7 cmpxchg64 shouldn't clear upper 32 bits of the old/new value   Will Deacon
• [GIT PULL] arm64 patches for 3.10-rc1   Catalin Marinas
• [PATCH v5, part3 01/15] mm: fix build warnings caused by free_reserved_area()   Jiang Liu
  • [PATCH v5, part3 01/15] mm: fix build warnings caused by free_reserved_area()   Russell King - ARM Linux
    • [PATCH] mm: change signature of free_reserved_area() to fix building warnings   Jiang Liu
• [PATCH v5, part3 03/15] mm/ARM64: kill poison_init_mem()   Jiang Liu
• [PATCH v5, part4 13/41] mm/ARM: prepare for removing num_physpages and simplify mem_init()   Jiang Liu
• [PATCH v5, part4 14/41] mm/ARM64: prepare for removing num_physpages and simplify mem_init()   Jiang Liu
• [PATCH] ARM: exynos: Select PINCTRL_EXYNOS for exynos5   Doug Anderson
  • [PATCH] ARM: exynos: Select PINCTRL_EXYNOS for exynos5   Olof Johansson
    • [PATCH] ARM: exynos: Select PINCTRL_EXYNOS for exynos5   Doug Anderson
      • [PATCH] ARM: exynos: Select PINCTRL_EXYNOS for exynos5   Olof Johansson
      • [PATCH] ARM: exynos: Select PINCTRL_EXYNOS for exynos5   Tomasz Figa
      • [PATCH] ARM: exynos: Select PINCTRL_EXYNOS for exynos5   Doug Anderson
      • [PATCH] ARM: exynos: Select PINCTRL_EXYNOS for exynos5   Kukjin Kim
  • [PATCH v2] ARM: exynos: Select PINCTRL_EXYNOS for exynos4/5 at arch level   Doug Anderson
    • [PATCH v3] ARM: exynos: Select PINCTRL_EXYNOS for exynos4/5 at chip level   Doug Anderson
      • [PATCH v3] ARM: exynos: Select PINCTRL_EXYNOS for exynos4/5 at chip level   Linus Walleij
      • [PATCH v3] ARM: exynos: Select PINCTRL_EXYNOS for exynos4/5 at chip level   Kukjin Kim
• [PATCH] ARM: exynos: dts: Fixed vbus-gpios   Doug Anderson
  • [PATCH] ARM: exynos: dts: Fixed vbus-gpios   Olof Johansson
  • [PATCH] ARM: exynos: dts: Fixed vbus-gpios   Jingoo Han
• [PATCHv4] arm: Preserve the user r/w register TPIDRURW on context switch and fork   André Hentschel
  • [PATCHv4] arm: Preserve the user r/w register TPIDRURW on context switch and fork   André Hentschel
    • [PATCHv4] arm: Preserve the user r/w register TPIDRURW on context switch and fork   Jonathan Austin
      • [PATCHv4] arm: Preserve the user r/w register TPIDRURW on context switch and fork   André Hentschel
• [PATCH V5 0/6] ARM: OMAP3+: support cpufreq-cpu0 for device tree boot   Nishanth Menon
  • [PATCH V5 1/6] clk: OMAP: introduce device tree binding to kernel clock data   Nishanth Menon
    • [PATCH V5 1/6] clk: OMAP: introduce device tree binding to kernel clock data   Mike Turquette
      • [PATCH V5 1/6] clk: OMAP: introduce device tree binding to kernel clock data   Tony Lindgren
      • [PATCH V5 1/6] clk: OMAP: introduce device tree binding to kernel clock data   Mike Turquette
      • [PATCH V5 1/6] clk: OMAP: introduce device tree binding to kernel clock data   Tony Lindgren
  • [PATCH V5 2/6] ARM: dts: OMAP3: add clock nodes for CPU   Nishanth Menon
  • [PATCH V5 3/6] ARM: dts: OMAP4: add clock nodes for CPU   Nishanth Menon
  • [PATCH V5 4/6] ARM: dts: AM33XX: add clock nodes for CPU   Nishanth Menon
  • [PATCH V5 6/6] ARM: OMAP3+: use cpu0-cpufreq driver in device tree supported boot   Nishanth Menon
• [PATCH V5 5/6] ARM: OMAP2+: AM33XX: add lateinit hook for calling pm late init   Nishanth Menon
• [REGRESSION] SLAB allocator (on Zynq)   Sören Brinkmann
  • [REGRESSION] SLAB allocator (on Zynq)   Tony Lindgren
    • [REGRESSION] SLAB allocator (on Zynq)   Sören Brinkmann
• [RFC PATCH 0/3] ARM: omap3: add Seagate Wireless Plus board   Jason Cooper
  • [RFC PATCH 2/3] ARM: omap3: Seagate Wireless Plus DT entry   Jason Cooper
  • [RFC PATCH 3/3] ARM: omap3: wireless plus gpmc wip   Jason Cooper
  • [RFC PATCH 0/3] ARM: omap3: add Seagate Wireless Plus board   Tony Lindgren
    • [RFC PATCH 0/3] ARM: omap3: add Seagate Wireless Plus board   Jason Cooper
      • [RFC PATCH 0/3] ARM: omap3: add Seagate Wireless Plus board   Tony Lindgren
      • [RFC PATCH 0/3] ARM: omap3: add Seagate Wireless Plus board   Tony Lindgren
  • [RFC PATCH 0/3] ARM: omap3: add Seagate Wireless Plus board   Tony Lindgren
    • [RFC PATCH 0/3] ARM: omap3: add Seagate Wireless Plus board   Jason Cooper
      • [RFC PATCH 0/3] ARM: omap3: add Seagate Wireless Plus board   Tony Lindgren
• [RFC PATCH 1/3] ARM: omap3: Seagate Wireless Plus board   Jason Cooper
• OMAP baseline test results for v3.9-rc8   Paul Walmsley
• OMAP baseline test results for v3.9   Paul Walmsley
  • OMAP baseline test results for v3.9   Tony Lindgren
    • OMAP baseline test results for v3.9   Paul Walmsley
      • OMAP baseline test results for v3.9   Tony Lindgren
      • OMAP baseline test results for v3.9   Paul Walmsley
• [PATCH] ARM: avoid mis-detecting some V7 cores in the decompressor   Stephen Boyd
  • [PATCH] ARM: avoid mis-detecting some V7 cores in the decompressor   Stephen Boyd
  • [PATCH] ARM: avoid mis-detecting some V7 cores in the decompressor   Stephen Boyd
    • [PATCH] ARM: avoid mis-detecting some V7 cores in the decompressor   Stephen Boyd
      • [PATCH] ARM: avoid mis-detecting some V7 cores in the decompressor   Russell King - ARM Linux
      • [PATCH] ARM: avoid mis-detecting some V7 cores in the decompressor   Stephen Boyd
• [PATCH] ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module   Tony Lindgren
• [PATCH] ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx   Tony Lindgren
• [PATCH v2] ARM: KVM: prevent NULL pointer dereferences with KVM VCPU ioctl   Andre Przywara
  • [PATCH v2] ARM: KVM: prevent NULL pointer dereferences with KVM VCPU ioctl   Christoffer Dall
    • [PATCH v2] ARM: KVM: prevent NULL pointer dereferences with KVM VCPU ioctl   Andre Przywara
      • [PATCH v2] ARM: KVM: prevent NULL pointer dereferences with KVM VCPU ioctl   Christoffer Dall
      • [PATCH v2] ARM: KVM: prevent NULL pointer dereferences with KVM VCPU ioctl   Andre Przywara
      • [PATCH v2] ARM: KVM: prevent NULL pointer dereferences with KVM VCPU ioctl   Rob Herring
      • [PATCH v2] ARM: KVM: prevent NULL pointer dereferences with KVM VCPU ioctl   Christoffer Dall
• Problems while booting a linux system on fast models based CortexA15   Christoffer Dall
  • Problems while booting a linux system on fast models based CortexA15   Alexander Spyridakis
• [PATCH] ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init()   Tony Lindgren
• [PATCH v7 0/3] Add USB support to R8A7778/BOCK-W   Sergei Shtylyov
  • [PATCH v7 2/3] ARM: shmobile: r8a7778: add USB support   Sergei Shtylyov
  • [PATCH v7 3/3] ARM: shmobile: BOCK-W: add USB support   Sergei Shtylyov
• [PATCH v2 0/3] clk: implement remuxing during set_rate   Stephen Boyd
  • [PATCH v2 0/3] clk: implement remuxing during set_rate   Saravana Kannan
  • [PATCH v2 0/3] clk: implement remuxing during set_rate   James Hogan
    • [PATCH v2 0/3] clk: implement remuxing during set_rate   Stephen Boyd
      • [PATCH v2 0/3] clk: implement remuxing during set_rate   James Hogan
  • [PATCH v2 0/3] clk: implement remuxing during set_rate   Mike Turquette
    • [PATCH v2 0/3] clk: implement remuxing during set_rate   James Hogan
      • [PATCH v2 0/3] clk: implement remuxing during set_rate   Mike Turquette
      • [PATCH v2 0/3] clk: implement remuxing during set_rate   James Hogan
      • [PATCH v2 0/3] clk: implement remuxing during set_rate   Mike Turquette
  • [PATCH v2 0/3] clk: implement remuxing during set_rate   Saravana Kannan
    • [PATCH v2 0/3] clk: implement remuxing during set_rate   James Hogan
• [PATCHv2] ARM:dts:omap4-panda:Update the LED support for the panda DTS   Tony Lindgren
  • [PATCHv2] ARM:dts:omap4-panda:Update the LED support for the panda DTS   Dan Murphy
    • [PATCHv2] ARM:dts:omap4-panda:Update the LED support for the panda DTS   Tony Lindgren
• [PATCH] ARM: OMAP2+: omap-usb-host: clean up pin mux setup code   Tony Lindgren
  • [PATCH] ARM: OMAP2+: omap-usb-host: clean up pin mux setup code   Roger Quadros
• [v2, 3/3] ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm   Tony Lindgren
  • [v2, 3/3] ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm   Gupta, Pekon
    • [v2, 3/3] ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm   Gupta, Pekon
      • [v2, 3/3] ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm   Benoit Cousson
      • [v2, 3/3] ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm   Gupta, Pekon
      • [v2, 3/3] ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm   Gupta, Pekon
      • [v2, 3/3] ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm   Benoit Cousson
• [PATCH] ARM: shmobile: r8a7778: correct model name in Kconfig   Sergei Shtylyov
  • [PATCH] ARM: shmobile: r8a7778: correct model name in Kconfig   Simon Horman
    • [PATCH] ARM: shmobile: r8a7778: correct model name in Kconfig   Sergei Shtylyov
      • [PATCH] ARM: shmobile: r8a7778: correct model name in Kconfig   Kuninori Morimoto
      • [PATCH] ARM: shmobile: r8a7778: correct model name in Kconfig   Simon Horman
      • [PATCH] ARM: shmobile: r8a7778: correct model name in Kconfig   Sergei Shtylyov
• [GIT PULL] ARM: OMAP2+: GPMC fixes for v3.10   Tony Lindgren
• [PATCH 0/5] add SPI/NOR for imx6q{dl}-sabreauto boards   Huang Shijie
  • [PATCH 1/5] ARM: dts: imx6q: add a new device node for ecspi1   Huang Shijie
    • [PATCH 1/5] ARM: dts: imx6q: add a new device node for ecspi1   Huang Shijie
  • [PATCH 2/5] ARM: dts: imx6dl: add a pinctrl for eCSPI1   Huang Shijie
  • [PATCH 3/5] ARM: dts: imx6dl: add a gpio for hog   Huang Shijie
  • [PATCH 4/5] ARM: dts: imx6q: add a gpio for hog   Huang Shijie
  • [PATCH 5/5] ARM: dts: add SPI/NOR for mx6q{dl}-sabreauto boards   Huang Shijie
    • [PATCH 5/5] ARM: dts: add SPI/NOR for mx6q{dl}-sabreauto boards   Shawn Guo
    • [PATCH 5/5] ARM: dts: add SPI/NOR for mx6q{dl}-sabreauto boards   Sascha Hauer
      • [PATCH 5/5] ARM: dts: add SPI/NOR for mx6q{dl}-sabreauto boards   Shawn Guo
• [PATCH 0/3] Fix disable of unused clk/regulator with deferred probe   Saravana Kannan
  • [PATCH 1/3] driver core: Add API to wait for deferred probe to complete during init   Saravana Kannan
    • [PATCH 1/3] driver core: Add API to wait for deferred probe to complete during init   Ming Lei
      • [PATCH 1/3] driver core: Add API to wait for deferred probe to complete during init   Grant Likely
      • [PATCH 1/3] driver core: Add API to wait for deferred probe to complete during init   Mark Brown
      • [PATCH 1/3] driver core: Add API to wait for deferred probe to complete during init   Russell King - ARM Linux
      • [PATCH 1/3] driver core: Add API to wait for deferred probe to complete during init   Mark Brown
      • [PATCH 1/3] driver core: Add API to wait for deferred probe to complete during init   Russell King - ARM Linux
      • [PATCH 1/3] driver core: Add API to wait for deferred probe to complete during init   Mark Brown
      • [PATCH 1/3] driver core: Add API to wait for deferred probe to complete during init   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/3] driver core: Add API to wait for deferred probe to complete during init   Grant Likely
      • [PATCH 1/3] driver core: Add API to wait for deferred probe to complete during init   Mark Brown
      • [PATCH 1/3] driver core: Add API to wait for deferred probe to complete during init   Saravana Kannan
      • [PATCH 1/3] driver core: Add API to wait for deferred probe to complete during init   Grant Likely
      • [PATCH 1/3] driver core: Add API to wait for deferred probe to complete during init   Saravana Kannan
    • [PATCH 1/3] driver core: Add API to wait for deferred probe to complete during init   Ming Lei
  • [PATCH 3/3] regulator: core: Disable unused regulators after deferred probing is done   Saravana Kannan
  • [PATCH v2 1/2] clk: Disable unused clocks after deferred probing is done   Saravana Kannan
    • [PATCH 2/2] regulator: core: Disable unused regulators after deferred probing is done   Saravana Kannan
    • [PATCH v2 1/2] clk: Disable unused clocks after deferred probing is done   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH v2 1/2] clk: Disable unused clocks after deferred probing is done   Saravana Kannan
      • [PATCH v2 1/2] clk: Disable unused clocks after deferred probing is done   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH v2 1/2] clk: Disable unused clocks after deferred probing is done   Saravana Kannan
      • [PATCH v2 1/2] clk: Disable unused clocks after deferred probing is done   Ulf Hansson
      • [PATCH v2 1/2] clk: Disable unused clocks after deferred probing is done   Saravana Kannan
      • [PATCH v2 1/2] clk: Disable unused clocks after deferred probing is done   Mike Turquette
      • [PATCH v2 1/2] clk: Disable unused clocks after deferred probing is done   Saravana Kannan
• [PATCH 2/3] clk: Disable unused clocks after deferred probing is done   Saravana Kannan
• [PATCH] arm64: KVM: Add bits for specifying memory type in stage2 PTE   Anup Patel
  • [PATCH] arm64: KVM: Add bits for specifying memory type in stage2 PTE   Marc Zyngier
    • [PATCH] arm64: KVM: Add bits for specifying memory type in stage2 PTE   Anup Patel
      • [PATCH] arm64: KVM: Add bits for specifying memory type in stage2 PTE   Marc Zyngier
• [PATCH] ARM: mmc: bcm281xx SDHCI driver   Christian Daudt
  • [PATCH] ARM: mmc: bcm281xx SDHCI driver   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH] ARM: mmc: bcm281xx SDHCI driver   Christian Daudt
    • [PATCH] ARM: mmc: bcm281xx SDHCI driver   Christian Daudt
      • [PATCH] ARM: mmc: bcm281xx SDHCI driver   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH] ARM: mmc: bcm281xx SDHCI driver   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH] ARM: mmc: bcm281xx SDHCI driver   Christian Daudt
  • [PATCH] ARM: mmc: bcm281xx SDHCI driver   Stephen Warren
• безукоризненное решение для любых ваших вопросов   laykoni
• [PATCH] net: fec: enable hardware checksum only on imx6q-fec   Shawn Guo
  • [PATCH] net: fec: enable hardware checksum only on imx6q-fec   Jim Baxter
  • [PATCH] net: fec: enable hardware checksum only on imx6q-fec   David Miller
• [PATCH 1/3] irqchip: move mmp irq driver   Haojian Zhuang
• [PATCH 0/2] atmel_nand: remove cpu_is_xxx() in nand driver   Josh Wu
  • [PATCH 1/2] atmel_nand: at91/avr32/: Replace cpu_is_at32ap7000() with a nand platform data   Josh Wu
    • [PATCH 1/2] atmel_nand: at91/avr32/: Replace cpu_is_at32ap7000() with a nand platform data   Hans-Christian Egtvedt
  • [PATCH 2/2] mtd: atmel_nand: add a new dt binding item for nand dma support   Josh Wu
• omap3430 fails to boot   Russell King - ARM Linux
  • omap3430 fails to boot   Tony Lindgren
• arch/arm/mach-omap2/id.c - IS_ERR_OR_NULL()   Russell King - ARM Linux
  • arch/arm/mach-omap2/id.c - IS_ERR_OR_NULL()   Tony Lindgren
  • arch/arm/mach-omap2/id.c - IS_ERR_OR_NULL()   Ruslan Bilovol
    • arch/arm/mach-omap2/id.c - IS_ERR_OR_NULL()   Russell King - ARM Linux
• [PATCHv2] net: smsc911x: don't artificially limit build   Mark Rutland
  • [PATCHv2] net: smsc911x: don't artificially limit build   Mark Rutland
    • [PATCHv2] net: smsc911x: don't artificially limit build   David Miller
• [RFC PATCH v3] ARM CCI support   Lorenzo Pieralisi
  • [RFC PATCH v3] drivers: bus: add ARM CCI support   Lorenzo Pieralisi
    • [RFC PATCH v3] drivers: bus: add ARM CCI support   Javi Merino
      • [RFC PATCH v3] drivers: bus: add ARM CCI support   Nicolas Pitre
      • [RFC PATCH v3] drivers: bus: add ARM CCI support   Lorenzo Pieralisi
      • [RFC PATCH v3] drivers: bus: add ARM CCI support   Nicolas Pitre
      • [RFC PATCH v3] drivers: bus: add ARM CCI support   Lorenzo Pieralisi
    • [RFC PATCH v3] drivers: bus: add ARM CCI support   Jon Medhurst (Tixy)
      • [RFC PATCH v3] drivers: bus: add ARM CCI support   Lorenzo Pieralisi
      • [RFC PATCH v3] drivers: bus: add ARM CCI support   Benjamin Herrenschmidt
• [PATCH 14/21] arm64: delay: remove inline marking of EXPORT_SYMBOL functions   Denis Efremov
  • [PATCH 14/21] arm64: delay: remove inline marking of EXPORT_SYMBOL functions   Catalin Marinas
• [PATCH 21/21] ARM: remove inline marking of EXPORT_SYMBOL functions   Denis Efremov
• [PATCH] mfd: ab8500-sysctrl: Always enable pm_power_off handler   Fabio Baltieri
  • [PATCH] mfd: ab8500-sysctrl: Always enable pm_power_off handler   Lee Jones
  • [PATCH] mfd: ab8500-sysctrl: Always enable pm_power_off handler   Linus Walleij
• [PATCH] arm64: KVM: Fix HCR_EL2 and VTCR_EL2 configuration bits   Pranavkumar Sawargaonkar
  • [PATCH] arm64: KVM: Fix HCR_EL2 and VTCR_EL2 configuration bits   Marc Zyngier
    • [PATCH] arm64: KVM: Fix HCR_EL2 and VTCR_EL2 configuration bits   Pranavkumar Sawargaonkar
• [PATCH] serial: pl011: protect attribute read from NULL platform data struct   Lee Jones
  • [PATCH] serial: pl011: protect attribute read from NULL platform data struct   Linus Walleij
    • [PATCH] serial: pl011: protect attribute read from NULL platform data struct   Lee Jones
• GPIO sysfs : set a wake source   Robert Jarzmik
  • GPIO sysfs : set a wake source   Linus Walleij
    • GPIO sysfs : set a wake source   Stephen Warren
      • GPIO sysfs : set a wake source   Robert Jarzmik
      • GPIO sysfs : set a wake source   Stephen Warren
      • GPIO sysfs : set a wake source   Robert Jarzmik
      • GPIO sysfs : set a wake source   Linus Walleij
      • GPIO sysfs : set a wake source   Robert Jarzmik
      • GPIO sysfs : set a wake source   Linus Walleij
• [PATCH 1/2] Revert "drivers/rtc/rtc-pxa.c: fix set time sync time issue"   Robert Jarzmik
• [GIT PULL 1/2] omap fixes for v3.10 merge window part2   Tony Lindgren
  • [GIT PULL 2/2] omap device tree fixes for v3.10 merge window   Tony Lindgren
  • [GIT PULL 1/2] omap fixes for v3.10 merge window part2   Olof Johansson
    • [GIT PULL 1/2] omap fixes for v3.10 merge window part2   Tony Lindgren
  • [GIT PULL 2/2] omap device tree fixes for v3.10 merge window   Olof Johansson
• [PATCH v2 2/3] clk: add support for clock reparent on set_rate   Stephen Boyd
  • [PATCH v2 2/3] clk: add support for clock reparent on set_rate   James Hogan
  • [PATCH v2 2/3] clk: add support for clock reparent on set_rate   Mike Turquette
    • [PATCH v2 2/3] clk: add support for clock reparent on set_rate   James Hogan
• [PATCH] ARM: EXYNOS5: Fix kernel dump in AFTR idle mode   Olof Johansson
  • [PATCH] ARM: EXYNOS5: Fix kernel dump in AFTR idle mode   Kukjin Kim
    • [PATCH] ARM: EXYNOS5: Fix kernel dump in AFTR idle mode   Olof Johansson
• [GIT PULL] ARM: arm-soc fixes and a few straggler patches for 3.10   Olof Johansson
• [PATCH] ARM: exynos: defconfig update   Olof Johansson
  • [PATCH] ARM: exynos: defconfig update   Doug Anderson
  • [PATCH] ARM: exynos: defconfig update   Tushar Behera
• [GIT PULL] Late Exynos stuff for v3.10   Olof Johansson
  • [GIT PULL] Late Exynos stuff for v3.10   Kukjin Kim
    • [GIT PULL] Late Exynos stuff for v3.10   Tushar Behera
      • [GIT PULL] Late Exynos stuff for v3.10   Kukjin Kim
• [PATCH 0/3] ARM: KDB FIQ debugger   John Stultz
  • [PATCH 1/3] ARM: Move some macros from entry-armv to entry-header   John Stultz
  • [PATCH 2/3] ARM: Add KGDB/KDB FIQ debugger generic code   John Stultz
  • [PATCH 3/3] ARM: versatile: Make able to use UART ports for KGDB FIQ debugger   John Stultz
    • [PATCH 3/3] ARM: versatile: Make able to use UART ports for KGDB FIQ debugger   Thomas Petazzoni
      • [PATCH 3/3] ARM: versatile: Make able to use UART ports for KGDB FIQ debugger   Anton Vorontsov
• [PATCH 0/2 V4] DMA: AT91: Fix get residue function in at_hdmac.c   Elen Song
  • [PATCH 0/2 V4] DMA: AT91: Fix get residue function in at_hdmac.c   Vinod Koul
• [PATCH 1/2 V4] DMA: AT91: Get transfer width   Elen Song
• [PATCH 2/2 V4] DMA: AT91: Get residual bytes in dma buffer   Elen Song
• [PATCH 1/1] ARM: mcpm: Fix build error with gic_secondary_init call   Sachin Kamat
  • [PATCH 1/1] ARM: mcpm: Fix build error with gic_secondary_init call   Nicolas Pitre
• [PATCH] ARM: dts: add max8997 device node for exynos4210-origen board   Tushar Behera
  • [PATCH] ARM: dts: add max8997 device node for exynos4210-origen board   Tushar Behera
  • [PATCH] ARM: dts: add max8997 device node for exynos4210-origen board   Kukjin Kim
• [PATCH] ARM: EXYNOS: Update defconfig for Arndale and Origen board   Tushar Behera
  • [PATCH] ARM: EXYNOS: Update defconfig for Arndale and Origen board   Doug Anderson
  • [PATCH] ARM: EXYNOS: Update defconfig for Arndale and Origen board   Kevin Hilman
    • [PATCH] ARM: EXYNOS: Update defconfig for Arndale and Origen board   Tushar Behera
      • [PATCH] ARM: EXYNOS: Update defconfig for Arndale and Origen board   Olof Johansson
      • [PATCH] ARM: EXYNOS: Update defconfig for Arndale and Origen board   Tushar Behera
      • [PATCH] ARM: EXYNOS: Update defconfig for Arndale and Origen board   Olof Johansson
      • [PATCH] ARM: EXYNOS: Update defconfig for Arndale and Origen board   Tushar Behera
      • [PATCH] ARM: EXYNOS: Update defconfig for Arndale and Origen board   Jingoo Han
      • [PATCH] ARM: EXYNOS: Update defconfig for Arndale and Origen board   Olof Johansson
      • [PATCH] ARM: EXYNOS: Update defconfig for Arndale and Origen board   Tushar Behera
      • [PATCH] ARM: EXYNOS: Update defconfig for Arndale and Origen board   Jingoo Han
      • [PATCH] ARM: EXYNOS: Update defconfig for Arndale and Origen board   Vivek Gautam
      • [PATCH] ARM: EXYNOS: Update defconfig for Arndale and Origen board   Tushar Behera
      • [PATCH] ARM: EXYNOS: Update defconfig for Arndale and Origen board   Tushar Behera
      • [PATCH] ARM: EXYNOS: Update defconfig for Arndale and Origen board   Kevin Hilman
      • [PATCH] ARM: EXYNOS: Update defconfig for Arndale and Origen board   Kevin Hilman
  • [PATCH] ARM: EXYNOS: Update defconfig for Arndale and Origen board   Olof Johansson
    • [PATCH] ARM: EXYNOS: Update defconfig for Arndale and Origen board   Kukjin Kim
• [PATCH V2] arm64: KVM: Fix HCR_EL2 and VTCR_EL2 configuration bits   Pranavkumar Sawargaonkar
  • [PATCH V2] arm64: KVM: Fix HCR_EL2 and VTCR_EL2 configuration bits   Christopher Covington
    • [PATCH V2] arm64: KVM: Fix HCR_EL2 and VTCR_EL2 configuration bits   Marc Zyngier
      • [PATCH V2] arm64: KVM: Fix HCR_EL2 and VTCR_EL2 configuration bits   Christopher Covington
      • [PATCH V2] arm64: KVM: Fix HCR_EL2 and VTCR_EL2 configuration bits   Pranavkumar Sawargaonkar
• [PATCH 0/2] ARM: shmobile: lager: enable Ether   Simon Horman
  • [PATCH 1/2] ARM: shmobile: r8a7790: add Ether support   Simon Horman
    • [PATCH 1/2] ARM: shmobile: r8a7790: add Ether support   Sergei Shtylyov
      • [PATCH 1/2] ARM: shmobile: r8a7790: add Ether support   Simon Horman
      • [PATCH 1/2] ARM: shmobile: r8a7790: add Ether support   Sergei Shtylyov
      • [PATCH 1/2] ARM: shmobile: r8a7790: add Ether support   Simon Horman
  • [PATCH 2/2] ARM: shmobile: lager: enable Ether   Simon Horman
    • [PATCH 2/2] ARM: shmobile: lager: enable Ether   Sergei Shtylyov
      • [PATCH 2/2] ARM: shmobile: lager: enable Ether   Simon Horman
      • [PATCH 2/2] ARM: shmobile: lager: enable Ether   Sergei Shtylyov
      • [PATCH 2/2] ARM: shmobile: lager: enable Ether   Laurent Pinchart
    • [PATCH 2/2] ARM: shmobile: lager: enable Ether   Laurent Pinchart
• [PATCH] mmc: atmel-mci: convert to dma_request_slave_channel_compat()   Nicolas Ferre
  • [PATCH] mmc: atmel-mci: convert to dma_request_slave_channel_compat()   Chris Ball
• [PATCH] ARM: at91: dts: request only spi cs-gpios used on sama5d3x cpu module   Nicolas Ferre
  • [PATCH] ARM: at91: dts: request only spi cs-gpios used on sama5d3x cpu module   Nicolas Ferre
  • [PATCH] ARM: at91: dts: request only spi cs-gpios used on sama5d3x cpu module   Jean-Christophe PLAGNIOL-VILLARD
• [RFC 23/42] drivers/spi: don't check resource with devm_ioremap_resource   Mark Brown
  • [RFC 23/42] drivers/spi: don't check resource with devm_ioremap_resource   Stephen Warren
  • [RFC 23/42] drivers/spi: don't check resource with devm_ioremap_resource   Jingoo Han
• [PATCH 1/2] ARM: mxs: Add default AUART2 pinmux   Marek Vasut
  • [PATCH 2/2] ARM: mxs: Fix UARTs on M28EVK   Marek Vasut
    • [PATCH 2/2] ARM: mxs: Fix UARTs on M28EVK   Shawn Guo
  • [PATCH 1/2] ARM: mxs: Add default AUART2 pinmux   Shawn Guo
    • [PATCH 1/2] ARM: mxs: Add default AUART2 pinmux   Marek Vasut
• [PATCH] clk: add specified-rate clock   James Hogan
  • [PATCH] clk: add specified-rate clock   Mike Turquette
• [PATCH 1/3] dmaengine: at_hdmac/trivial: correct typo in comment   Nicolas Ferre
  • [PATCH 2/3] dmaengine: at_hdmac: extend hardware handshaking interface identification   Nicolas Ferre
  • [PATCH 3/3] dmaengine: at_hdmac/trivial: rearrange CFG register bits assignment   Nicolas Ferre
  • [PATCH 1/3] dmaengine: at_hdmac/trivial: correct typo in comment   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 0/6] ARM; OMAP2+: hwmod and SERIAL: Remove sysc handling from driver   Nishanth Menon
  • [PATCH v2 0/6] ARM; OMAP2+: hwmod and SERIAL: Remove sysc handling from driver   Rajendra Nayak
• [RFC 18/42] drivers/pinctrl: don't check resource with devm_ioremap_resource   Jean-Christophe PLAGNIOL-VILLARD
  • [RFC 18/42] drivers/pinctrl: don't check resource with devm_ioremap_resource   Linus Walleij
• [PATCH RFC 0/2] clk: add metag specific gate/mux clocks   James Hogan
  • [PATCH RFC 1/2] clk: metag/clk-gate: add metag specific clock gate   James Hogan
  • [PATCH RFC 2/2] clk: metag/clk-mux: add metag specific clk-mux   James Hogan
  • [PATCH RFC 0/2] clk: add metag specific gate/mux clocks   James Hogan
    • [PATCH RFC 0/2] clk: add metag specific gate/mux clocks   James Hogan
  • [PATCH RFC 1/2] clk: metag/clk-gate: add metag specific clock gate   James Hogan
  • [PATCH RFC 2/2] clk: metag/clk-mux: add metag specific clk-mux   James Hogan
  • [PATCH RFC 0/2] clk: add metag specific gate/mux clocks   Stephen Boyd
    • [PATCH RFC 0/2] clk: add metag specific gate/mux clocks   James Hogan
      • [PATCH RFC 0/2] clk: add metag specific gate/mux clocks   Stephen Boyd
      • [PATCH RFC 0/2] clk: add metag specific gate/mux clocks   James Hogan
    • [PATCH RFC 0/2] clk: add metag specific gate/mux clocks   Mike Turquette
  • [PATCH RFC 0/2] clk: add metag specific gate/mux clocks   Mike Turquette
• [PATCH V2 1/2] ARM: mmc: bcm281xx SDHCI driver   Christian Daudt
  • [PATCH V2 1/2] ARM: mmc: bcm281xx SDHCI driver   Arnd Bergmann
    • [PATCH V2 1/2] ARM: mmc: bcm281xx SDHCI driver   Christian Daudt
      • [PATCH V2 1/2] ARM: mmc: bcm281xx SDHCI driver   Arnd Bergmann
• [PATCH V2 2/2] ARM: mmc: bcm281xx SDHCI driver (dt mods)   Christian Daudt
  • [PATCH V2 2/2] ARM: mmc: bcm281xx SDHCI driver (dt mods)   Matt Porter
• [RFC 38/42] arch/arm/plat-omap: don't check resource with devm_ioremap_resource   Tony Lindgren
• [PATCH RFC] User space clock driver   Soren Brinkmann
  • [PATCH RFC] clk: Introduce userspace clock driver   Soren Brinkmann
    • [PATCH RFC] clk: Introduce userspace clock driver   Emilio López
      • [PATCH RFC] clk: Introduce userspace clock driver   Sören Brinkmann
      • [PATCH RFC] clk: Introduce userspace clock driver   Emilio López
      • [PATCH RFC] clk: Introduce userspace clock driver   Mike Turquette
      • [PATCH RFC] clk: Introduce userspace clock driver   Saravana Kannan
      • [PATCH RFC] clk: Introduce userspace clock driver   Sören Brinkmann
      • [PATCH RFC] clk: Introduce userspace clock driver   Saravana Kannan
      • [PATCH RFC] clk: Introduce userspace clock driver   Sören Brinkmann
      • [PATCH RFC] clk: Introduce userspace clock driver   Mark Brown
      • [PATCH RFC] clk: Introduce userspace clock driver   Saravana Kannan
      • [PATCH RFC] clk: Introduce userspace clock driver   Mark Brown
      • [PATCH RFC] clk: Introduce userspace clock driver   Sören Brinkmann
      • [PATCH RFC] clk: Introduce userspace clock driver   Peter De Schrijver
    • [PATCH RFC] clk: Introduce userspace clock driver   Sören Brinkmann
    • [PATCH RFC] clk: Introduce userspace clock driver   Mark Brown
      • [PATCH RFC] clk: Introduce userspace clock driver   Sören Brinkmann
      • [PATCH RFC] clk: Introduce userspace clock driver   Mark Brown
      • [PATCH RFC] clk: Introduce userspace clock driver   Sören Brinkmann
      • [PATCH RFC] clk: Introduce userspace clock driver   Mark Brown
      • [PATCH RFC] clk: Introduce userspace clock driver   Sören Brinkmann
      • [PATCH RFC] clk: Introduce userspace clock driver   Sebastian Hesselbarth
      • [PATCH RFC] clk: Introduce userspace clock driver   Sören Brinkmann
      • [PATCH RFC] clk: Introduce userspace clock driver   Sebastian Hesselbarth
      • [PATCH RFC] clk: Introduce userspace clock driver   Sören Brinkmann
      • [PATCH RFC] clk: Introduce userspace clock driver   Sebastian Hesselbarth
      • [PATCH RFC] clk: Introduce userspace clock driver   Mike Turquette
      • [PATCH RFC] clk: Introduce userspace clock driver   Philip Balister
      • [PATCH RFC] clk: Introduce userspace clock driver   Mark Brown
      • [PATCH RFC] clk: Introduce userspace clock driver   Saravana Kannan
      • [PATCH RFC] clk: Introduce userspace clock driver   Philip Balister
      • [PATCH RFC] clk: Introduce userspace clock driver   Mark Brown
      • [PATCH RFC] clk: Introduce userspace clock driver   Sören Brinkmann
      • [PATCH RFC] clk: Introduce userspace clock driver   Mark Brown
      • [PATCH RFC] clk: Introduce userspace clock driver   Mark Brown
      • [PATCH RFC] clk: Introduce userspace clock driver   Sebastian Hesselbarth
      • [PATCH RFC] clk: Introduce userspace clock driver   Mark Brown
• [PATCH] pinctrl: vt8500: Fix incorrect data in WM8750 pinctrl table   Tony Prisk
  • [PATCH] pinctrl: vt8500: Fix incorrect data in WM8750 pinctrl table   Linus Walleij
• [PATCH] ARM: plat-orion: add missing ehci include to common.h   Sebastian Hesselbarth
  • [PATCH] ARM: plat-orion: add missing ehci include to common.h   Jason Cooper
• [PATCH 1/1] ARM: DT: tegra: Add gpio-leds to Tegra30 Beaver   Eric Brower
  • [PATCH 1/1] ARM: DT: tegra: Add gpio-leds to Tegra30 Beaver   Stephen Warren
• [PATCH 00/10] clk: mvebu: restructure SoC clock drivers   Sebastian Hesselbarth
  • [PATCH 01/10] clk: mvebu: introduce per-clock-gate flags   Sebastian Hesselbarth
    • [PATCH 01/10] clk: mvebu: introduce per-clock-gate flags   Jason Cooper
  • [PATCH 02/10] clk: mvebu: add common clock functions for core clk and clk gating   Sebastian Hesselbarth
  • [PATCH 04/10] clk: mvebu: add Kirkwood SoC-centric clock init   Sebastian Hesselbarth
  • [PATCH 05/10] clk: mvebu: add Armada 370 SoC-centric clock init   Sebastian Hesselbarth
    • [PATCH 05/10] clk: mvebu: add Armada 370 SoC-centric clock init   Jason Cooper
  • [PATCH 06/10] clk: mvebu: add Armada XP SoC-centric clock init   Sebastian Hesselbarth
    • [PATCH 06/10] clk: mvebu: add Armada XP SoC-centric clock init   Jason Cooper
  • [PATCH 07/10] ARM: dove: move DT boards to SoC-centric clock init   Sebastian Hesselbarth
  • [PATCH 08/10] ARM: kirkwood: move DT boards to SoC-centric clock init   Sebastian Hesselbarth
  • [PATCH 10/10] clk: mvebu: desintegrate obsolete file   Sebastian Hesselbarth
  • [PATCH 00/10] clk: mvebu: restructure SoC clock drivers   Thomas Petazzoni
    • [PATCH 00/10] clk: mvebu: restructure SoC clock drivers   Jason Cooper
      • [PATCH 00/10] clk: mvebu: restructure SoC clock drivers   Thomas Petazzoni
      • [PATCH 00/10] clk: mvebu: restructure SoC clock drivers   Gregory CLEMENT
  • [PATCH 00/10] clk: mvebu: restructure SoC clock drivers   Jason Cooper
  • [PATCH 00/10] clk: mvebu: restructure SoC clock drivers   Jason Cooper
    • [PATCH 00/10] clk: mvebu: restructure SoC clock drivers   Thomas Petazzoni
      • [PATCH 00/10] clk: mvebu: restructure SoC clock drivers   Sebastian Hesselbarth
      • [PATCH 00/10] clk: mvebu: restructure SoC clock drivers   Jason Cooper
      • [PATCH 00/10] clk: mvebu: restructure SoC clock drivers   Sebastian Hesselbarth
      • [PATCH 00/10] clk: mvebu: restructure SoC clock drivers   Jason Cooper
  • [PATCH 00/10] clk: mvebu: restructure SoC clock drivers   Mike Turquette
    • [PATCH 00/10] clk: mvebu: restructure SoC clock drivers   Sebastian Hesselbarth
      • [PATCH 00/10] clk: mvebu: restructure SoC clock drivers   Jason Cooper
• [PATCH 03/10] clk: mvebu: add Dove SoC-centric clock init   Sebastian Hesselbarth
• [PATCH 09/10] ARM: mvebu: move DT boards to SoC-centric clock init   Sebastian Hesselbarth
• [PATCH -v10 00/11] Shutdown from reboot_cpuid without stopping other cpus.   Robin Holt
  • [PATCH -v10 00/11] Shutdown from reboot_cpuid without stopping other cpus.   Robin Holt
    • [PATCH -v10 01/11] CPU hotplug: Provide a generic helper to disable/enable CPU hotplug   Robin Holt
    • [PATCH -v10 02/11] Migrate shutdown/reboot to boot cpu.   Robin Holt
    • [PATCH -v10 04/11] Move shutdown/reboot related functions to kernel/reboot.c   Robin Holt
    • [PATCH -v10 05/11] checkpatch.pl the new kernel/reboot.c file.   Robin Holt
    • [PATCH -v10 06/11] x86, prepare reboot_mode for moving to generic kernel code.   Robin Holt
    • [PATCH -v10 07/11] unicore32, prepare reboot_mode for moving to generic kernel code.   Robin Holt
    • [PATCH -v10 08/11] arm, Remove unused restart_mode fields from some arm subarchs   Robin Holt
      • [PATCH -v10 08/11] arm, Remove unused restart_mode fields from some arm subarchs   Russell King - ARM Linux
    • [PATCH -v10 09/11] arm, prepare reboot_mode for moving to generic kernel code.   Robin Holt
      • [PATCH -v10 09/11] arm, prepare reboot_mode for moving to generic kernel code.   Russell King - ARM Linux
      • [PATCH -v10 09/11] arm, prepare reboot_mode for moving to generic kernel code.   H. Peter Anvin
      • [PATCH -v10 09/11] arm, prepare reboot_mode for moving to generic kernel code.   Russell King - ARM Linux
      • [PATCH -v10 09/11] arm, prepare reboot_mode for moving to generic kernel code.   H. Peter Anvin
    • [PATCH -v10 10/11] arm, change reboot_mode to use enum reboot_mode   Robin Holt
      • [PATCH -v10 10/11] arm, change reboot_mode to use enum reboot_mode   Russell King - ARM Linux
    • [PATCH -v10 11/11] Move arch/x86 reboot= handling to generic kernel.   Robin Holt
      • [PATCH -v10 11/11] Move arch/x86 reboot= handling to generic kernel.   Russell King - ARM Linux
    • [PATCH -v10 00/11] Shutdown from reboot_cpuid without stopping other cpus.   Russell King - ARM Linux
    • [PATCH -v10 00/11] Shutdown from reboot_cpuid without stopping other cpus.   Robin Holt
• [PATCH] ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards   Tony Lindgren
  • [PATCH] ARM: dts: Fix musb interrupt for device tree booting   Tony Lindgren
  • [PATCH] ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards   Kishon Vijay Abraham I
    • [PATCH] ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards   Tony Lindgren
• [RFC 39/42] arch/arm/plat-samsung: don't check resource with devm_ioremap_resource   Jingoo Han
• [RFC 09/42] drivers/i2c/busses: don't check resource with devm_ioremap_resource   Jingoo Han
• [PATCH] usb: gadget: s3c2410: fix clk resource leak and update   Libo Chen
  • [PATCH] usb: gadget: s3c2410: fix clk resource leak and update   Tomasz Figa
    • [PATCH] usb: gadget: s3c2410: fix clk resource leak and update   Libo Chen
• [PATCH 1/2] ARM: dts: add DP clock reference to exynos5250 device tree   Jingoo Han
  • [PATCH 1/2] ARM: dts: add DP clock reference to exynos5250 device tree   Doug Anderson
• [PATCH 2/2] ARM: dts: Document DP clock in samsung, exynos5-dp binding   Jingoo Han
  • [PATCH 2/2] ARM: dts: Document DP clock in samsung, exynos5-dp binding   Doug Anderson
• [PATCH] ARM: dts: add pin state information for DP HPD support to Exynos5250   Jingoo Han
  • [PATCH] ARM: dts: add pin state information for DP HPD support to Exynos5250   Doug Anderson
• [RFC 0/4] ARM: S3C24XX: add dmaengine based dma-driver   Heiko Stübner
  • [RFC 2/4] dma: add dmaengine driver for Samsung s3c24xx SoCs   Linus Walleij
    • [RFC 2/4] dma: add dmaengine driver for Samsung s3c24xx SoCs   Heiko Stübner
      • [RFC 2/4] dma: add dmaengine driver for Samsung s3c24xx SoCs   Linus Walleij
    • [RFC 2/4] dma: add dmaengine driver for Samsung s3c24xx SoCs   Tomasz Figa
  • [RFC 2/4] dma: add dmaengine driver for Samsung s3c24xx SoCs   Linus Walleij
    • [RFC 2/4] dma: add dmaengine driver for Samsung s3c24xx SoCs   Heiko Stübner
      • [RFC 2/4] dma: add dmaengine driver for Samsung s3c24xx SoCs   Sylwester Nawrocki
      • [RFC 2/4] dma: add dmaengine driver for Samsung s3c24xx SoCs   Heiko Stübner
      • [RFC 2/4] dma: add dmaengine driver for Samsung s3c24xx SoCs   Tomasz Figa
      • [RFC 2/4] dma: add dmaengine driver for Samsung s3c24xx SoCs   Heiko Stübner
      • [RFC 2/4] dma: add dmaengine driver for Samsung s3c24xx SoCs   Tomasz Figa
      • [RFC 2/4] dma: add dmaengine driver for Samsung s3c24xx SoCs   Linus Walleij
• [PATCH -v10 03/11] Remove -stable friendly PF_THREAD_BOUND define   Robin Holt
• [PATCH -v11 00/11] Shutdown from reboot_cpuid without stopping other cpus.   Robin Holt
  • [PATCH -v11 01/11] CPU hotplug: Provide a generic helper to disable/enable CPU hotplug   Robin Holt
  • [PATCH -v11 03/11] Remove -stable friendly PF_THREAD_BOUND define   Robin Holt
  • [PATCH -v11 04/11] Move shutdown/reboot related functions to kernel/reboot.c   Robin Holt
  • [PATCH -v11 05/11] checkpatch.pl the new kernel/reboot.c file.   Robin Holt
  • [PATCH -v11 06/11] x86, prepare reboot_mode for moving to generic kernel code.   Robin Holt
  • [PATCH -v11 07/11] unicore32, prepare reboot_mode for moving to generic kernel code.   Robin Holt
  • [PATCH -v11 08/11] arm, Remove unused restart_mode fields from some arm subarchs   Robin Holt
  • [PATCH -v11 09/11] arm, prepare reboot_mode for moving to generic kernel code.   Robin Holt
  • [PATCH -v11 10/11] arm, change reboot_mode to use enum reboot_mode   Robin Holt
  • [PATCH -v11 11/11] Move arch/x86 reboot= handling to generic kernel.   Robin Holt
• [PATCH -v11 02/11] Migrate shutdown/reboot to boot cpu.   Robin Holt
• [PATCH v6, part3 01/16] mm: change signature of free_reserved_area() to fix building warnings   Jiang Liu
• [PATCH v6, part3 03/16] mm/ARM64: kill poison_init_mem()   Jiang Liu
• [RFC PATCHv3 0/6] arm: Initial TI-Nspire support   Daniel Tang
  • [RFC PATCHv3 1/6] arm: Initial TI-Nspire support   Daniel Tang
    • [RFC PATCHv3 1/6] arm: Initial TI-Nspire support   Russell King - ARM Linux
      • [RFC PATCHv3 1/6] arm: Initial TI-Nspire support   Daniel Tang
  • [RFC PATCHv3 2/6] arm: Add device trees for TI-Nspire   Daniel Tang
    • [RFC PATCHv3 2/6] arm: Add device trees for TI-Nspire   Arnd Bergmann
  • [RFC PATCHv3 3/6] clk: Add TI-Nspire clock drivers   Daniel Tang
    • [RFC PATCHv3 3/6] clk: Add TI-Nspire clock drivers   Arnd Bergmann
      • [RFC PATCHv3 3/6] clk: Add TI-Nspire clock drivers   Daniel Tang
      • [RFC PATCHv3 3/6] clk: Add TI-Nspire clock drivers   Arnd Bergmann
      • [RFC PATCHv3 3/6] clk: Add TI-Nspire clock drivers   Daniel Tang
      • [RFC PATCHv3 3/6] clk: Add TI-Nspire clock drivers   Arnd Bergmann
      • [RFC PATCHv3 3/6] clk: Add TI-Nspire clock drivers   Daniel Tang
      • [RFC PATCHv3 3/6] clk: Add TI-Nspire clock drivers   Arnd Bergmann
  • [RFC PATCHv3 4/6] clocksource: Add TI-Nspire timer drivers   Daniel Tang
    • [RFC PATCHv3 4/6] clocksource: Add TI-Nspire timer drivers   Linus Walleij
      • [RFC PATCHv3 4/6] clocksource: Add TI-Nspire timer drivers   Daniel Tang
      • [RFC PATCHv3 4/6] clocksource: Add TI-Nspire timer drivers   Linus Walleij
      • [RFC PATCHv3 4/6] clocksource: Add TI-Nspire timer drivers   Daniel Tang
      • [RFC PATCHv3 4/6] clocksource: Add TI-Nspire timer drivers   Linus Walleij
  • [RFC PATCHv3 5/6] input: Add TI-Nspire keypad driver   Daniel Tang
  • [RFC PATCHv3 6/6] irqchip: Add TI-Nspire irqchip   Daniel Tang
• [PATCH V4] ARM: handle user space mapped pages in flush_kernel_dcache_page   Simon Baatz
  • [PATCH V4] ARM: handle user space mapped pages in flush_kernel_dcache_page   Catalin Marinas
    • [PATCH V4] ARM: handle user space mapped pages in flush_kernel_dcache_page   Nicolas Pitre
      • [PATCH V4] ARM: handle user space mapped pages in flush_kernel_dcache_page   Catalin Marinas
      • [PATCH V4] ARM: handle user space mapped pages in flush_kernel_dcache_page   Nicolas Pitre
      • [PATCH V4] ARM: handle user space mapped pages in flush_kernel_dcache_page   Catalin Marinas
      • [PATCH V4] ARM: handle user space mapped pages in flush_kernel_dcache_page   Nicolas Pitre
      • [PATCH V4] ARM: handle user space mapped pages in flush_kernel_dcache_page   Nicolas Pitre
      • [PATCH V4] ARM: handle user space mapped pages in flush_kernel_dcache_page   Catalin Marinas
    • [PATCH V4] ARM: handle user space mapped pages in flush_kernel_dcache_page   Simon Baatz
      • [PATCH V4] ARM: handle user space mapped pages in flush_kernel_dcache_page   Catalin Marinas
      • [PATCH V4] ARM: handle user space mapped pages in flush_kernel_dcache_page   Nicolas Pitre
  • [PATCH V4] ARM: handle user space mapped pages in flush_kernel_dcache_page   Catalin Marinas
    • [PATCH V4] ARM: handle user space mapped pages in flush_kernel_dcache_page   Simon Baatz
      • [PATCH V4] ARM: handle user space mapped pages in flush_kernel_dcache_page   Catalin Marinas
      • [PATCH V4] ARM: handle user space mapped pages in flush_kernel_dcache_page   Jason Cooper
      • [PATCH V4] ARM: handle user space mapped pages in flush_kernel_dcache_page   Catalin Marinas
      • [PATCH V4] ARM: handle user space mapped pages in flush_kernel_dcache_page   Jason Cooper
  • [PATCH V4] ARM: handle user space mapped pages in flush_kernel_dcache_page   Ming Lei
    • [PATCH V4] ARM: handle user space mapped pages in flush_kernel_dcache_page   Simon Baatz
• [PATCH] i2c: vt8500: Add support for I2C bus on Wondermedia SoCs   Tony Prisk
  • [PATCH] i2c: vt8500: Add support for I2C bus on Wondermedia SoCs   Tony Prisk
• [RFC 19/42] drivers/pinctrl/spear: don't check resource with devm_ioremap_resource   Viresh Kumar
  • [RFC 19/42] drivers/pinctrl/spear: don't check resource with devm_ioremap_resource   Linus Walleij
• [RFC 22/42] drivers/rtc: don't check resource with devm_ioremap_resource   Viresh Kumar
• [RFC 20/42] drivers/pwm: don't check resource with devm_ioremap_resource   Viresh Kumar
• [PATCH] ARM: KVM: Handle loads from I/O addresses to PC   Christoffer Dall
  • [PATCH] ARM: KVM: Handle loads from I/O addresses to PC   Marc Zyngier
  • [PATCH] ARM: KVM: Handle loads from I/O addresses to PC   Catalin Marinas
• [PATCH] ARM: sunxi: New watchdog driver for Allwinner A10/A13   Carlo Caione
  • [PATCH] ARM: sunxi: New watchdog driver for Allwinner A10/A13   Maxime Ripard
    • [PATCH] ARM: sunxi: New watchdog driver for Allwinner A10/A13   Guenter Roeck
      • [PATCH] ARM: sunxi: New watchdog driver for Allwinner A10/A13   Maxime Ripard
  • [PATCH] ARM: sunxi: New watchdog driver for Allwinner A10/A13   Maxime Ripard
• Освоить поразительно скоро   Надежда Антоновна
• [PATCH] pinctrl: document the "GPIO mode" pitfall   Linus Walleij
• [PATCH] pinctrl: enable build of pinctrl-imx6sl driver   Shawn Guo
  • [PATCH] pinctrl: enable build of pinctrl-imx6sl driver   Linus Walleij
    • [PATCH] pinctrl: enable build of pinctrl-imx6sl driver   Shawn Guo
• [PATCH 1/2] ARM: dts: imx6qdl: remove redundant usbmisc label   Shawn Guo
  • [PATCH 2/2] ARM: dts: imx6qdl: remove redundant ocotp node   Shawn Guo
• [PATCH 0/3] ARM: imx: make mxs_restart() work for DT boot   Shawn Guo
  • [PATCH 1/3] ARM: imx: include <asm/io.h> in hardware.h   Shawn Guo
  • [PATCH 2/3] ARM: imx: move clk_prepare() out from mxs_restart()   Shawn Guo
    • [PATCH 2/3] ARM: imx: move clk_prepare() out from mxs_restart()   Sascha Hauer
      • [PATCH 2/3] ARM: imx: move clk_prepare() out from mxs_restart()   Shawn Guo
  • [PATCH 3/3] ARM: imx: create imx_arch_reset_init() for DT boot   Shawn Guo
    • [PATCH 3/3] ARM: imx: create imx_arch_reset_init() for DT boot   Sascha Hauer
      • [PATCH 3/3] ARM: imx: create imx_arch_reset_init() for DT boot   Shawn Guo
      • [PATCH 3/3] ARM: imx: create imx_arch_reset_init() for DT boot   Sascha Hauer
    • [PATCH v2 3/3] ARM: imx: create mxc_arch_reset_init_dt() for DT boot   Shawn Guo
      • [PATCH v2 3/3] ARM: imx: create mxc_arch_reset_init_dt() for DT boot   Sascha Hauer
• [PATCH] ARM: OMAP: fix error return code in omap1_system_dma_init()   Wei Yongjun
  • [PATCH] ARM: OMAP: fix error return code in omap1_system_dma_init()   Tony Lindgren
• [PATCHv6 0/3] Add support for velocity network driver on platform devices   Tony Prisk
  • [PATCHv6 1/3] net: velocity: Rename vptr->dev to vptr->netdev   Tony Prisk
  • [PATCHv6 2/3] net: velocity: Convert to generic dma functions   Tony Prisk
  • [PATCHv6 3/3] net: velocity: Add platform device support to VIA velocity driver   Tony Prisk
  • [PATCHv6 0/3] Add support for velocity network driver on platform devices   Tony Prisk
    • [PATCHv6 1/3] net: velocity: Rename vptr->dev to vptr->netdev   Tony Prisk
    • [PATCHv6 2/3] net: velocity: Convert to generic dma functions   Tony Prisk
    • [PATCHv6 3/3] net: velocity: Add platform device support to VIA velocity driver   Tony Prisk
    • [PATCHv6 0/3] Add support for velocity network driver on platform devices   David Miller
      • [PATCHv6 0/3] Add support for velocity network driver on platform devices   David Miller
      • [PATCHv6 0/3] Add support for velocity network driver on platform devices   Tony Prisk
• [PATCH] [media] s5p-tv: fix error return code in mxr_acquire_video()   Wei Yongjun
• [V9 PATCH 00/12] mv-usb phy driver   Chao Xie
  • [V9 PATCH 00/12] mv-usb phy driver   Chao Xie
    • [PATCh V10 05/12] usb: phy: phy-mv-usb: use USB2 PHY driver for otg   Chao Xie
    • [PATCh V10 06/12] usb: mv_u3d: usb phy drivers for phy operation   Chao Xie
    • [PATCh V10 07/12] arm: mmp2: change the defintion of usb devices   Chao Xie
    • [PATCh V10 09/12] arm: ttc_dkb: modify usb support   Chao Xie
    • [PATCh V10 10/12] arm: mmp: remove unused usb devices   Chao Xie
    • [PATCh V10 12/12] usb: mv_usb: remove the phy callbacks in pdata   Chao Xie
  • [V9 PATCH 00/12] mv-usb phy driver   Felipe Balbi
• [PATCh V10 01/12] usb: phy: protect phy init and shutdown for mutiple deivces   Chao Xie
• [PATCh V10 02/12] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller   Chao Xie
• [PATCh V10 03/12] usb: gadget: mv_udc: use PHY driver for udc   Chao Xie
• [PATCh V10 04/12] usb: ehci: ehci-mv: use PHY driver for ehci   Chao Xie
  • [PATCh V10 04/12] usb: ehci: ehci-mv: use PHY driver for ehci   Alan Stern
    • [PATCh V10 04/12] usb: ehci: ehci-mv: use PHY driver for ehci   Felipe Balbi
      • [PATCh V10 04/12] usb: ehci: ehci-mv: use PHY driver for ehci   Chao Xie
      • [PATCh V10 04/12] usb: ehci: ehci-mv: use PHY driver for ehci   Felipe Balbi
      • [PATCh V10 04/12] usb: ehci: ehci-mv: use PHY driver for ehci   Roger Quadros
      • [PATCh V10 04/12] usb: ehci: ehci-mv: use PHY driver for ehci   Alan Stern
• [PATCh V10 08/12] arm: pxa910: change the defintion of usb devices   Chao Xie
• [PATCh V10 11/12] arm: brownstone: add usb support for the board   Chao Xie
• [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq   Viresh Kumar
  • [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq   Rafael J. Wysocki
    • [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq   Viresh Kumar
      • [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq   Kukjin Kim
      • [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq   Rafael J. Wysocki
      • [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq   Viresh Kumar
      • [PATCH 07/18] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq   Kukjin Kim
• [RFC] device-tree.git automatic sync from linux.git   Michal Simek
  • [RFC] device-tree.git automatic sync from linux.git   Ian Campbell
    • [RFC] device-tree.git automatic sync from linux.git   Michal Simek
• [PATCH] mtd: devices: added the 16mb winbond device   Artem Bityutskiy
• Introduce a new helper framework for buffer synchronization   Maarten Lankhorst
  • Introduce a new helper framework for buffer synchronization   Inki Dae
    • Introduce a new helper framework for buffer synchronization   Maarten Lankhorst
      • Introduce a new helper framework for buffer synchronization   Inki Dae
      • Introduce a new helper framework for buffer synchronization   Maarten Lankhorst
      • Introduce a new helper framework for buffer synchronization   Inki Dae
      • Introduce a new helper framework for buffer synchronization   Rob Clark
      • Introduce a new helper framework for buffer synchronization   Rob Clark
      • Introduce a new helper framework for buffer synchronization   Inki Dae
      • Introduce a new helper framework for buffer synchronization   Rob Clark
      • Introduce a new helper framework for buffer synchronization   Inki Dae
      • Introduce a new helper framework for buffer synchronization   Rob Clark
      • Introduce a new helper framework for buffer synchronization   Daniel Vetter
      • Introduce a new helper framework for buffer synchronization   Daniel Vetter
      • Introduce a new helper framework for buffer synchronization   Daniel Vetter
      • Introduce a new helper framework for buffer synchronization   Inki Dae
      • Introduce a new helper framework for buffer synchronization   Daniel Vetter
      • Introduce a new helper framework for buffer synchronization   Inki Dae
      • Introduce a new helper framework for buffer synchronization   Daniel Vetter
      • Introduce a new helper framework for buffer synchronization   Inki Dae
      • Introduce a new helper framework for buffer synchronization   Inki Dae
      • Introduce a new helper framework for buffer synchronization   Maarten Lankhorst
      • Introduce a new helper framework for buffer synchronization   Inki Dae
      • Introduce a new helper framework for buffer synchronization   Maarten Lankhorst
      • Introduce a new helper framework for buffer synchronization   Rob Clark
      • Introduce a new helper framework for buffer synchronization   Daniel Vetter
      • Introduce a new helper framework for buffer synchronization   Inki Dae
      • Introduce a new helper framework for buffer synchronization   Inki Dae
      • Introduce a new helper framework for buffer synchronization   Daniel Vetter
      • Introduce a new helper framework for buffer synchronization   Inki Dae
      • Introduce a new helper framework for buffer synchronization   Rob Clark
      • Introduce a new helper framework for buffer synchronization   Inki Dae
      • Introduce a new helper framework for buffer synchronization   Daniel Vetter
      • Introduce a new helper framework for buffer synchronization   Inki Dae
      • Introduce a new helper framework for buffer synchronization   Tomasz Figa
• [PATCH 0/2] clk: vt8500: updates for 3.11   Tony Prisk
  • [PATCH 1/2] clk: vt8500: Add support for clocks on the WM8850 SoCs   Tony Prisk
  • [PATCH 2/2] clk: vt8500: Remove unnecessary divisor adjustment in vtwm_dclk_set_rate()   Tony Prisk
  • [PATCH 0/2] clk: vt8500: updates for 3.11   Mike Turquette
• [PATCH] ARM: sunxi: select ARCH_REQUIRE_GPIOLIB   Maxime Ripard
  • [PATCH] ARM: sunxi: select ARCH_REQUIRE_GPIOLIB   Emilio López
• [PATCH 0/3] ARM: mach-shmobile: lager: support GPIO switche   Simon Horman
  • [PATCH 1/3] gpio-rcar: Add support for IRQ_TYPE_EDGE_BOTH   Simon Horman
    • [PATCH 1/3] gpio-rcar: Add support for IRQ_TYPE_EDGE_BOTH   Magnus Damm
      • [PATCH 1/3] gpio-rcar: Add support for IRQ_TYPE_EDGE_BOTH   Simon Horman
• [PATCH 2/3] ARM: shmobile: r8a7790: Configure R-Car GPIO for IRQ_TYPE_EDGE_BOTH   Simon Horman
  • [PATCH 2/3] ARM: shmobile: r8a7790: Configure R-Car GPIO for IRQ_TYPE_EDGE_BOTH   Laurent Pinchart
    • [PATCH 2/3] ARM: shmobile: r8a7790: Configure R-Car GPIO for IRQ_TYPE_EDGE_BOTH   Simon Horman
      • [PATCH 2/3] ARM: shmobile: r8a7790: Configure R-Car GPIO for IRQ_TYPE_EDGE_BOTH   Magnus Damm
      • [PATCH 2/3] ARM: shmobile: r8a7790: Configure R-Car GPIO for IRQ_TYPE_EDGE_BOTH   Laurent Pinchart
• [PATCH 3/3] ARM: mach-shmobile: lager: support GPIO switches   Simon Horman
  • [PATCH 3/3] ARM: mach-shmobile: lager: support GPIO switches   Sergei Shtylyov
  • [PATCH 3/3] ARM: mach-shmobile: lager: support GPIO switches   Laurent Pinchart
    • [PATCH 3/3] ARM: mach-shmobile: lager: support GPIO switches   Simon Horman
      • [PATCH 3/3] ARM: mach-shmobile: lager: support GPIO switches   Magnus Damm
      • [PATCH 3/3] ARM: mach-shmobile: lager: support GPIO switches   Simon Horman
      • [PATCH 3/3] ARM: mach-shmobile: lager: support GPIO switches   Laurent Pinchart
• [PATCH] ARM: OMAP: fix __init section mismatch for _enable_preprogram   jean-philippe francois
  • [PATCH] ARM: OMAP: fix __init section mismatch for _enable_preprogram   Tony Lindgren
• [PATCH 00/14] Cleanup irqchip_init calls   Maxime Ripard
  • [PATCH 05/14] ARM: shmobile: Remove init_irq declaration in machine description   Maxime Ripard
    • [PATCH 05/14] ARM: shmobile: Remove init_irq declaration in machine description   Simon Horman
      • [PATCH 05/14] ARM: shmobile: Remove init_irq declaration in machine description   Maxime Ripard
  • [PATCH 06/14] ARM: bcm281xx: Remove init_irq declaration in machine description   Maxime Ripard
    • [PATCH 06/14] ARM: bcm281xx: Remove init_irq declaration in machine description   Christian Daudt
      • [PATCH 06/14] ARM: bcm281xx: Remove init_irq declaration in machine description   Maxime Ripard
      • [PATCH 06/14] ARM: bcm281xx: Remove init_irq declaration in machine description   Christian Daudt
  • [PATCH 07/14] ARM: spear: Remove init_irq declaration in machine description   Maxime Ripard
    • [PATCH 07/14] ARM: spear: Remove init_irq declaration in machine description   Viresh Kumar
  • [PATCH 08/14] ARM: msm: Remove init_irq declaration in machine description   Maxime Ripard
    • [PATCH 08/14] ARM: msm: Remove init_irq declaration in machine description   David Brown
      • [PATCH 08/14] ARM: msm: Remove init_irq declaration in machine description   Maxime Ripard
  • [PATCH 09/14] ARM: mvebu: Remove init_irq declaration in machine description   Maxime Ripard
    • [PATCH 09/14] ARM: mvebu: Remove init_irq declaration in machine description   Jason Cooper
      • [PATCH 09/14] ARM: mvebu: Remove init_irq declaration in machine description   Maxime Ripard
      • [PATCH 09/14] ARM: mvebu: Remove init_irq declaration in machine description   Olof Johansson
  • [PATCH 10/14] ARM: mxs: Remove init_irq declaration in machine description   Maxime Ripard
  • [PATCH 11/14] ARM: sirf: Remove init_irq declaration in machine description   Maxime Ripard
    • [PATCH 11/14] ARM: sirf: Remove init_irq declaration in machine description   Barry Song
  • [PATCH 12/14] ARM: vexpress: Remove init_irq declaration in machine description   Maxime Ripard
    • [PATCH 12/14] ARM: vexpress: Remove init_irq declaration in machine description   Pawel Moll
  • [PATCH 13/14] ARM: virt: Remove init_irq declaration in machine description   Maxime Ripard
  • [PATCH 14/14] ARM: vt8500: Remove init_irq declaration in machine description   Maxime Ripard
• [PATCH 01/14] ARM: sunxi: Remove init_irq declaration in machine description   Maxime Ripard
• [PATCH 02/14] ARM: zynq: Remove init_irq declaration in machine description   Maxime Ripard
• [PATCH 03/14] ARM: nomadik: Remove init_irq declaration in machine description   Maxime Ripard
• [PATCH 04/14] ARM: picoxcell: Remove init_irq declaration in machine description   Maxime Ripard
• Board file to device tree migration   jean-philippe francois
  • Board file to device tree migration   Thomas Petazzoni
• [PATCH v2] documentation: iommu: add description of ARM System MMU binding   Andreas Herrmann
  • [PATCH v2] documentation: iommu: add description of ARM System MMU binding   Will Deacon
    • [PATCH v2] documentation: iommu: add description of ARM System MMU binding   Andreas Herrmann
      • [PATCH v2] documentation: iommu: add description of ARM System MMU binding   Andreas Herrmann
      • [PATCH v2] documentation: iommu: add description of ARM System MMU binding   Will Deacon
      • [PATCH v2] documentation: iommu: add description of ARM System MMU binding   Andreas Herrmann
      • [PATCH v2] documentation: iommu: add description of ARM System MMU binding   Will Deacon
      • [PATCH v2] documentation: iommu: add description of ARM System MMU binding   Andreas Herrmann
• [PATCH 0/4] ARM: Remove boilerplate debug_ll_io_init code   Maxime Ripard
  • [PATCH 2/4] ARM: highbank: remove the .map_io declaration   Maxime Ripard
    • [PATCH 2/4] ARM: highbank: remove the .map_io declaration   Rob Herring
  • [PATCH 4/4] ARM: sunxi: Remove the .map_io function declaration   Maxime Ripard
  • [PATCH 0/4] ARM: Remove boilerplate debug_ll_io_init code   Arnd Bergmann
    • [PATCH 0/4] ARM: Remove boilerplate debug_ll_io_init code   Maxime Ripard
      • [PATCH 0/4] ARM: Remove boilerplate debug_ll_io_init code   Arnd Bergmann
      • [PATCH 0/4] ARM: Remove boilerplate debug_ll_io_init code   Maxime Ripard
• [PATCH 1/4] ARM: mmu: Call debug_ll_io_init if no map_io function is specified   Maxime Ripard
  • [PATCH 1/4] ARM: mmu: Call debug_ll_io_init if no map_io function is specified   Rob Herring
• [PATCH 3/4] ARM: mxs: remove the .map_io declaration   Maxime Ripard
  • [PATCH 3/4] ARM: mxs: remove the .map_io declaration   Shawn Guo
• [PATCH 0/6] CLK: tegra: convert device tree files to use CLK defines   Hiroshi Doyu
  • [PATCH 1/6] ARM: tegra20: create a DT header defining CLK IDs   Hiroshi Doyu
    • [PATCH 1/6] ARM: tegra20: create a DT header defining CLK IDs   Stephen Warren
      • [PATCH 1/6] ARM: tegra20: create a DT header defining CLK IDs   Hiroshi Doyu
    • [PATCH 1/6] ARM: tegra20: create a DT header defining CLK IDs   Stephen Warren
  • [PATCH 2/6] ARM: tegra20: convert device tree files to use CLK defines   Hiroshi Doyu
    • [PATCH 2/6] ARM: tegra20: convert device tree files to use CLK defines   Stephen Warren
  • [PATCH 3/6] ARM: tegra30: create a DT header defining CLK IDs   Hiroshi Doyu
  • [PATCH 4/6] ARM: tegra30: convert device tree files to use CLK defines   Hiroshi Doyu
  • [PATCH 5/6] ARM: tegra114: create a DT header defining CLK IDs   Hiroshi Doyu
  • [PATCH 6/6] ARM: tegra114: convert device tree files to use CLK defines   Hiroshi Doyu
• [PATCH 1/3] ARM: dts: imx28-evk: Enable touchscreen support   Fabio Estevam
  • [PATCH 1/3] ARM: dts: imx28-evk: Enable touchscreen support   Shawn Guo
    • [PATCH 1/3] ARM: dts: imx28-evk: Enable touchscreen support   Marek Vasut
    • [PATCH 1/3] ARM: dts: imx28-evk: Enable touchscreen support   Fabio Estevam
      • [PATCH 1/3] ARM: dts: imx28-evk: Enable touchscreen support   Shawn Guo
      • [PATCH 1/3] ARM: dts: imx28-evk: Enable touchscreen support   Marek Vasut
      • [PATCH 1/3] ARM: dts: imx28-evk: Enable touchscreen support   Shawn Guo
      • [PATCH 1/3] ARM: dts: imx28-evk: Enable touchscreen support   Marek Vasut
      • [PATCH 1/3] ARM: dts: imx28-evk: Enable touchscreen support   Shawn Guo
• [PATCH 0/3] mmc: mmci: Support ap_sleep in cpuidle for ux500   Ulf Hansson
• [PATCH 1/3] mmc: mmci: Use optional sleep pinctrl state   Ulf Hansson
  • [PATCH 1/3] mmc: mmci: Use optional sleep pinctrl state   Linus Walleij
• [PATCH 2/3] mmc: mmci: Adapt to register write restrictions   Ulf Hansson
• [PATCH 3/3] mmc: mmci: Save and restore register context   Ulf Hansson
• [PATCH] mmc: mmci: Use devm_clk_get API   Ulf Hansson
• [PATCH] mmc: mmci: Set actual clock for debug purpose   Ulf Hansson
• [PATCH] mmc: mmci: Support for CMD23   Ulf Hansson
• [PATCH] ARM: mvebu: Add a ranges entry to translate devbus childs   Ezequiel Garcia
  • [PATCH] ARM: mvebu: Add a ranges entry to translate devbus childs   Jason Cooper
• [PATCHv1 0/5] Marvell EBU irqchip improvements   Jason Cooper
• [PATCH] Kirkwood: Enable PCIe port 1 on QNAP TS-11x/TS-21x   Jason Cooper
  • [PATCH] Kirkwood: Enable PCIe port 1 on QNAP TS-11x/TS-21x   Jason Cooper
• [PATCH] net/macb: fix ISR clear-on-write behavior only for some SoC   Nicolas Ferre
  • [PATCH] net/macb: fix ISR clear-on-write behavior only for some SoC   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH] net/macb: fix ISR clear-on-write behavior only for some SoC   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH] net/macb: fix ISR clear-on-write behavior only for some SoC   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH] net/macb: fix ISR clear-on-write behavior only for some SoC   Michal Simek
    • [PATCH] net/macb: fix ISR clear-on-write behavior only for some SoC   Nicolas Ferre
      • [PATCH] net/macb: fix ISR clear-on-write behavior only for some SoC   Michal Simek
      • [PATCH] net/macb: fix ISR clear-on-write behavior only for some SoC   Nicolas Ferre
  • [PATCH] net/macb: fix ISR clear-on-write behavior only for some SoC   Steffen Trumtrar
  • [PATCH v2] net/macb: fix ISR clear-on-write behavior only for some SoC   Nicolas Ferre
    • [PATCH v2] net/macb: fix ISR clear-on-write behavior only for some SoC   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH v2] net/macb: fix ISR clear-on-write behavior only for some SoC   David Miller
• arm64: Platform devices populated from a device_initcall   Benoit Lecardonnel
  • arm64: Platform devices populated from a device_initcall   Catalin Marinas
    • arm64: Platform devices populated from a device_initcall   Benoit Lecardonnel
• [PATCH] ARM: defconfigs: OMAP: omap2plus_defconfig missing CONFIG_ARCH_MULTI_V6=y   Paul Walmsley
  • [PATCH] ARM: defconfigs: OMAP: omap2plus_defconfig missing CONFIG_ARCH_MULTI_V6=y   Paul Walmsley
    • [PATCH] ARM: defconfigs: OMAP: omap2plus_defconfig missing CONFIG_ARCH_MULTI_V6=y   Tony Lindgren
• [GIT PULL] ARM: mvebu: fixes for v3.10 (round 1)   Jason Cooper
  • [GIT PULL] ARM: mvebu: fixes for v3.10 (round 1)   Olof Johansson
• [PATCH 01/15] ARM: clps711x: Remove NEED_MACH_MEMORY_H dependency   Alexander Shiyan
  • [PATCH RESEND v2 1/3] GPIO: clps711x: Rewrite driver for using generic GPIO code   Alexander Shiyan
  • [PATCH RESEND v2 2/3] ARM: clps711x: Re-add GPIO support   Alexander Shiyan
  • [PATCH 03/15] ARM: clps711x: autcpu12: Move LCD DPOT definitions to board file   Alexander Shiyan
  • [PATCH RESEND v2 3/3] GPIO: clps711x: Add DT support   Alexander Shiyan
  • [PATCH 04/15] ARM: clps711x: autcpu12: Add support for NOR flash   Alexander Shiyan
  • [PATCH 05/15] ARM: clps711x: autcpu12: Special driver for handling memory is removed   Alexander Shiyan
  • [PATCH 06/15] ARM: clps711x: autcpu12: Move remaining specific definitions to board file   Alexander Shiyan
  • [PATCH 07/15] ARM: clps711x: p720t: Define PLD registers as GPIOs   Alexander Shiyan
  • [PATCH 08/15] ARM: clps711x: Move specific definitions from hardware.h to boards files   Alexander Shiyan
  • [PATCH 09/15] ARM: clps711x: Replace "arch_initcall" in common code with ".init_early"   Alexander Shiyan
  • [PATCH 10/15] ARM: clps711x: Add clocksource framework   Alexander Shiyan
  • [PATCH 11/15] ARM: clps711x: Optimize interrupt handling   Alexander Shiyan
  • [PATCH 12/15] ARM: clps711x: edb7211: Add support for I2C   Alexander Shiyan
  • [PATCH 13/15] ARM: clps711x: edb7211: Control LCD backlight via PWM   Alexander Shiyan
  • [PATCH 14/15] ARM: clps711x: Add support for SYSCON driver   Alexander Shiyan
  • [PATCH 15/15] ARM: clps711x: Update defconfig   Alexander Shiyan
• [PATCH 02/15] ARM: clps711x: Set PLL clock to zero if we work from 13 mHz source   Alexander Shiyan
• [PATCH 0/3] ARM: Kirkwood: Add DT support for (eSATA) Sheevaplug   Jason Cooper
• [PATCH v2 0/5] Zynq: revised CCF code   Soren Brinkmann
  • [PATCH v2 1/5] tty: xuartps: Remove suspend/resume functions   Soren Brinkmann
    • [PATCH v2 1/5] tty: xuartps: Remove suspend/resume functions   Michal Simek
      • [PATCH v2 1/5] tty: xuartps: Remove suspend/resume functions   Greg Kroah-Hartman
  • [PATCH v2 2/5] clk: zynq: Factor out PLL driver   Soren Brinkmann
  • [PATCH v2 3/5] clk: zynq: Add clock controller driver   Soren Brinkmann
  • [PATCH v2 4/5] arm: zynq: Migrate platform to clock controller   Soren Brinkmann
  • [PATCH v2 5/5] clk: zynq: Remove deprecated clock code   Soren Brinkmann
  • [PATCH v2 0/5] Zynq: revised CCF code   Michal Simek
    • [PATCH v2 0/5] Zynq: revised CCF code   Mike Turquette
      • [PATCH v2 0/5] Zynq: revised CCF code   Michal Simek
      • [PATCH v2 0/5] Zynq: revised CCF code   Mike Turquette
      • [PATCH v2 0/5] Zynq: revised CCF code   Michal Simek
  • [PATCH v2 0/5] Zynq: revised CCF code   Michal Simek
• Marvel 8797 Wifi module using SDIO 3.0   John Tobias
• [PATCH 1/4] ARM: tegra: use #include for all device trees   Stephen Warren
  • [PATCH 3/4] ARM: tegra: convert device tree files to use GPIO defines   Stephen Warren
  • [PATCH 4/4] ARM: tegra: convert device tree files to use IRQ defines   Stephen Warren
  • [PATCH 1/4] ARM: tegra: use #include for all device trees   Stephen Warren
• [PATCH 2/4] ARM: tegra: create a DT header defining GPIO IDs   Stephen Warren
• [PATCHv6 00/11] Remove ARM local timer API   Stephen Boyd
  • [PATCHv6 04/11] ARM: smp_twd: Divorce smp_twd from local timer API   Stephen Boyd
  • [PATCHv6 05/11] ARM: OMAP2+: Divorce from local timer API   Stephen Boyd
  • [PATCHv6 06/11] ARM: EXYNOS4: Divorce mct from local timer API   Stephen Boyd
  • [PATCHv6 07/11] ARM: PRIMA2: Divorce timer-marco from local timer API   Stephen Boyd
    • [PATCHv6 07/11] ARM: PRIMA2: Divorce timer-marco from local timer API   Stephen Boyd
  • [PATCHv6 08/11] ARM: msm: Divorce msm_timer from local timer API   Stephen Boyd
  • [PATCHv6 09/11] clocksource: time-armada-370-xp: Fix sparse warning   Stephen Boyd
  • [PATCHv6 10/11] clocksource: time-armada-370-xp: Divorce from local timer API   Stephen Boyd
  • [PATCHv6 11/11] ARM: smp: Remove local timer API   Stephen Boyd
  • [PATCHv6 00/11] Remove ARM local timer API   Stephen Boyd
    • [PATCHv6 00/11] Remove ARM local timer API   John Stultz
      • [PATCHv6 00/11] Remove ARM local timer API   Stephen Boyd
• [PATCHv6 01/11] clockevents: Prefer CPU local devices over global devices   Stephen Boyd
  • [PATCHv6 01/11] clockevents: Prefer CPU local devices over global devices   Sören Brinkmann
• [PATCHv6 02/11] clocksource: add generic dummy timer driver   Stephen Boyd
• [PATCHv6 03/11] ARM: smp: Remove duplicate dummy timer implementation   Stephen Boyd
  • [PATCHv6 03/11] ARM: smp: Remove duplicate dummy timer implementation   Stephen Boyd
• [PATCH 1/2] ARM: tegra: dalmore: populate key mapping   Stephen Warren
• [PATCH] ARM: Orion: Remove redundent init_dma_coherent_pool_size()   Jason Cooper
• [PATCH 2/5] clk: hi3xxx: add clock support   Mike Turquette
  • [PATCH 2/5] clk: hi3xxx: add clock support   Haojian Zhuang
    • [PATCH 2/5] clk: hi3xxx: add clock support   Mike Turquette
• [PATCH] ARM: tegra: fix memory size on Beaver   Stephen Warren
  • [PATCH] ARM: tegra: fix memory size on Beaver   Stephen Warren
• [PATCHv3 0/4] Memory mapped architected timers   Stephen Boyd
  • [PATCHv3 1/4] Documentation: Add memory mapped ARM architected timer binding   Stephen Boyd
  • [PATCHv3 2/4] clocksource: arch_timer: Pass clock event to set_mode callback   Stephen Boyd
  • [PATCHv3 3/4] clocksource: arch_timer: Push the read/write wrappers deeper   Stephen Boyd
  • [PATCHv3 4/4] clocksource: arch_timer: Add support for memory mapped timers   Stephen Boyd
• [PATCH v2 1/3] clk: abstract parent cache   Mike Turquette
• [PATCH] ARM: mvebu: Add support for USB storage class in mvebu_defconfig   Jason Cooper
• [PATCH] drivers: memory: Introduce Marvell EBU Device Bus driver   Jason Cooper
  • [PATCH] drivers: memory: Introduce Marvell EBU Device Bus driver   Ezequiel Garcia
• [PATCH] ARM: dove: add si5351 clock driver to CuBox DT   Jason Cooper
• [GIT PULL] ARM: mvebu: cleanups for v3.11 (round 1)   Jason Cooper
• [GIT PULL] ARM: mvebu: defconfig changes for v3.11 (round 1)   Jason Cooper
• [GIT PULL] ARM: mvebu: dt changes for v3.11 (round 1)   Jason Cooper
• [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression   Aaro Koskinen
  • [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression   Tony Lindgren
    • [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression   Aaro Koskinen
      • [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression   Tony Lindgren
      • [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression   Tony Lindgren
      • [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression   Aaro Koskinen
      • [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression   Jon Hunter
      • [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression   Aaro Koskinen
      • [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression   Jon Hunter
      • [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression   Aaro Koskinen
      • [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression   Jon Hunter
      • [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression   Aaro Koskinen
      • [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression   Jon Hunter
      • [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression   Aaro Koskinen
      • [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression   Jon Hunter
      • [BISECTED] 3.10-rc1 OMAP1 GPIO IRQ regression   Jon Hunter
• [PATCH V2 00/10] mmc_of_parse() adaptations, DT support for Sheevaplugs   Simon Baatz
  • [PATCH V2 07/10] ARM: mvebu: Use standard MMC binding for all users of mvsdio   Simon Baatz
    • [PATCH V2 07/10] ARM: mvebu: Use standard MMC binding for all users of mvsdio   Jason Cooper
      • [PATCH V2 07/10] ARM: mvebu: Use standard MMC binding for all users of mvsdio   Simon Baatz
    • [PATCH V2 07/10] ARM: mvebu: Use standard MMC binding for all users of mvsdio   Jason Cooper
  • [PATCH V2 08/10] mmc: mvsdio: use standard MMC device-tree binding parser mmc_of_parse()   Simon Baatz
  • [PATCH V2 09/10] ARM: Kirkwood: Add dts files for Sheevaplug and eSATA Sheevaplug   Simon Baatz
    • [PATCH V2 09/10] ARM: Kirkwood: Add dts files for Sheevaplug and eSATA Sheevaplug   Jason Cooper
  • [PATCH V2 10/10] ARM: Kirkwood: add DT support for Sheevaplug and Sheevaplug eSATA   Simon Baatz
    • [PATCH V2 10/10] ARM: Kirkwood: add DT support for Sheevaplug and Sheevaplug eSATA   Jason Cooper
    • [PATCH] ARM: kirkwood: enable Sheevaplug DT in defconfig   Jason Cooper
  • [PATCH V2 00/10] mmc_of_parse() adaptations, DT support for Sheevaplugs   Guennadi Liakhovetski
    • [PATCH V2 00/10] mmc_of_parse() adaptations, DT support for Sheevaplugs   Simon Baatz
      • [PATCH V2 00/10] mmc_of_parse() adaptations, DT support for Sheevaplugs   Simon Baatz
• [PATCH V2 01/10] mmc: return mmc_of_parse() errors to caller   Simon Baatz
  • [PATCH V2 01/10] mmc: return mmc_of_parse() errors to caller   Ulf Hansson
• [PATCH V2 02/10] mmc: sh_mmcif: handle mmc_of_parse() errors during probe   Simon Baatz
• [PATCH V2 03/10] mmc: tmio-mmc: handle mmc_of_parse() errors during probe   Simon Baatz
• [PATCH V2 04/10] mmc: mxcmmc: handle mmc_of_parse() errors during probe   Simon Baatz
• [PATCH V2 05/10] mmc: sdhi-pxav3: handle mmc_of_parse() errors during probe   Simon Baatz
  • [PATCH V2 05/10] mmc: sdhi-pxav3: handle mmc_of_parse() errors during probe   Guennadi Liakhovetski
• [PATCH V2 06/10] mmc: tegra: handle mmc_of_parse() errors during probe   Simon Baatz
• [PATCH v3] ARM: KVM: prevent NULL pointer dereferences with KVM VCPU ioctl   Andre Przywara
• [PATCH] bcache: Fix link errors on ARM   Mikulas Patocka
• rmk not asking Linus to pull for a while...   Russell King - ARM Linux
• [PATCH] ARM: EXYNOS: add PM dependency to PM_GENERIC_DOMAINS for Exynos4210   Jingoo Han
  • [PATCH] ARM: EXYNOS: add PM dependency to PM_GENERIC_DOMAINS for Exynos4210   Kukjin Kim
• owfs hangup on Linux 3.0.4 using DS28EC20 Dallas 1-wire EEPROM   Walter Lewis
• [PATCH v2 0/3]   Simon Horman
  • [PATCH v2 1/3] ARM: shmobile: r8a7790: add Ether support   Simon Horman
  • [PATCH v2 2/3] ARM: shmobile: lager: enable Ether   Simon Horman
    • [PATCH v2 2/3] ARM: shmobile: lager: enable Ether   Laurent Pinchart
      • [PATCH v2 2/3] ARM: shmobile: lager: enable Ether   Sergei Shtylyov
      • [PATCH v2 2/3] ARM: shmobile: lager: enable Ether   Sergei Shtylyov
  • [PATCH v2 3/3] ARM: shmobile: lager: enable nfsroot in DTS   Simon Horman
• [PATCH] mv643xx_eth: fix NAPI weight being > 64   Andrew Lunn
  • [PATCH] mv643xx_eth: fix NAPI weight being > 64   David Miller
• [PATCH] mmc: sdhci-sirf: let device core setup the default pin configuration   Barry Song
  • [PATCH] mmc: sdhci-sirf: let device core setup the default pin configuration   Linus Walleij
• [PATCH] ARM: PL011: add support for extended FIFO-size of PL011-r1p5   Stephen Warren
  • [PATCH] ARM: PL011: add support for extended FIFO-size of PL011-r1p5   Jongsung Kim
    • [PATCH] ARM: PL011: add support for extended FIFO-size of PL011-r1p5   Stephen Warren
      • [PATCH] ARM: PL011: add support for extended FIFO-size of PL011-r1p5   Russell King - ARM Linux
      • [PATCH] ARM: PL011: add support for extended FIFO-size of PL011-r1p5   Jongsung Kim
      • [PATCH] ARM: PL011: add support for extended FIFO-size of PL011-r1p5   Stephen Warren
      • [PATCH] ARM: PL011: add support for extended FIFO-size of PL011-r1p5   Russell King - ARM Linux
      • [PATCH] ARM: PL011: add support for extended FIFO-size of PL011-r1p5   Jongsung Kim
      • [PATCH] ARM: PL011: add support for extended FIFO-size of PL011-r1p5   Jongsung Kim
      • [PATCH] ARM: PL011: add support for extended FIFO-size of PL011-r1p5   Stephen Warren
      • [PATCH] ARM: bcm2835: override the HW UART periphid   Jongsung Kim
      • [PATCH] ARM: bcm2835: override the HW UART periphid   Jongsung Kim
      • [PATCH] ARM: bcm2835: override the HW UART periphid   Gordon Hollingworth
      • [PATCH] ARM: bcm2835: override the HW UART periphid   Stephen Warren
      • [PATCH] ARM: bcm2835: override the HW UART periphid   Stephen Warren
      • [PATCH] ARM: bcm2835: override the HW UART periphid   Jongsung Kim
      • [PATCH] ARM: bcm2835: override the HW UART periphid   Stephen Warren
• [PATCH] pinctrl:sirf:re-arch and add support for new SiRFatlas6 SoC   Barry Song
• [GIT PULL] ARM: imx: fixes for 3.10   Shawn Guo
  • [GIT PULL] ARM: imx: fixes for 3.10   Olof Johansson
• [PATCH v2] mmc: sdhci-sirf: let device core setup the default pin configuration   Barry Song
• [RFC PATCH v3 11/17] ARM: dts: prima2: cpus/cpu node dts updates   Barry Song
• [GIT PULL] MFD: Fixes due for the v3.10 -rc:s   Lee Jones
  • [GIT PULL v2] MFD: Fixes due for the v3.10 -rc:s   Lee Jones
    • [GIT PULL v2] MFD: Fixes due for the v3.10 -rc:s   Samuel Ortiz
      • [GIT PULL v2] MFD: Fixes due for the v3.10 -rc:s   Fabio Baltieri
      • [GIT PULL v2] MFD: Fixes due for the v3.10 -rc:s   Linus Walleij
      • [GIT PULL v2] MFD: Fixes due for the v3.10 -rc:s   Fabio Baltieri
      • [GIT PULL v2] MFD: Fixes due for the v3.10 -rc:s   Samuel Ortiz
      • [GIT PULL v2] MFD: Fixes due for the v3.10 -rc:s   Fabio Baltieri
      • [GIT PULL v2] MFD: Fixes due for the v3.10 -rc:s   Samuel Ortiz
• [RFC PATCH v3 05/17] ARM: dts: at91: cpus/cpu node dts updates   Nicolas Ferre
  • [RFC PATCH v3 05/17] ARM: dts: at91: cpus/cpu node dts updates   Lorenzo Pieralisi
• [PATCH] arm64: mm: Fix operands of clz in __flush_dcache_all   Anup Patel
  • [PATCH] arm64: mm: Fix operands of clz in __flush_dcache_all   Catalin Marinas
• [PATCH] arm: prima2: use of_platform_populate instead of of_platform_bus_probe   Barry Song
  • [PATCH] arm: prima2: use of_platform_populate instead of of_platform_bus_probe   Arnd Bergmann
    • [PATCH] arm: prima2: use of_platform_populate instead of of_platform_bus_probe   Barry Song
• [PATCH] ARM: mach-bcm: drop "select GPIO_BCM"   Paul Bolle
  • [PATCH] ARM: mach-bcm: drop "select GPIO_BCM"   Christian Daudt
    • [PATCH] ARM: mach-bcm: drop "select GPIO_BCM"   Paul Bolle
      • [PATCH] ARM: mach-bcm: drop "select GPIO_BCM"   Christian Daudt
• [PATCHv2] mv643xx_eth: fix NAPI weight being > 64   Andrew Lunn
  • [PATCHv2] mv643xx_eth: fix NAPI weight being > 64   Eric Dumazet
  • [PATCHv2] mv643xx_eth: fix NAPI weight being > 64   David Miller
• [PATCH v3 0/7] ARM: KVM: various mmu related fixes for 3.10   Marc Zyngier
  • [PATCH v3 1/7] ARM: KVM: be more thorough when invalidating TLBs   Marc Zyngier
    • [PATCH v3 1/7] ARM: KVM: be more thorough when invalidating TLBs   Christoffer Dall
  • [PATCH v3 3/7] ARM: KVM: relax cache maintainance when building page tables   Marc Zyngier
    • [PATCH v3 3/7] ARM: KVM: relax cache maintainance when building page tables   Will Deacon
    • [PATCH v3 3/7] ARM: KVM: relax cache maintainance when building page tables   Christoffer Dall
  • [PATCH v3 5/7] ARM: KVM: don't special case PC when doing an MMIO   Marc Zyngier
    • [PATCH v3 5/7] ARM: KVM: don't special case PC when doing an MMIO   Christoffer Dall
  • [PATCH v3 7/7] ARM: KVM: drop use of PAGE_S2_DEVICE   Marc Zyngier
    • [PATCH v3 7/7] ARM: KVM: drop use of PAGE_S2_DEVICE   Christoffer Dall
      • [PATCH v3 7/7] ARM: KVM: drop use of PAGE_S2_DEVICE   Marc Zyngier
      • [PATCH v3 7/7] ARM: KVM: drop use of PAGE_S2_DEVICE   Christoffer Dall
      • [PATCH v3 7/7] ARM: KVM: drop use of PAGE_S2_DEVICE   Marc Zyngier
      • [PATCH v3 7/7] ARM: KVM: drop use of PAGE_S2_DEVICE   Christoffer Dall
  • [PATCH v3 0/7] ARM: KVM: various mmu related fixes for 3.10   Catalin Marinas
• [PATCH v3 2/7] ARM: KVM: remove dead prototype for __kvm_tlb_flush_vmid   Marc Zyngier
  • [PATCH v3 2/7] ARM: KVM: remove dead prototype for __kvm_tlb_flush_vmid   Christoffer Dall
• [PATCH v3 4/7] ARM: KVM: use phys_addr_t instead of unsigned long long for HYP PGDs   Marc Zyngier
  • [PATCH v3 4/7] ARM: KVM: use phys_addr_t instead of unsigned long long for HYP PGDs   Christoffer Dall
• [PATCH v3 6/7] ARM: KVM: get rid of S2_PGD_SIZE   Marc Zyngier
  • [PATCH v3 6/7] ARM: KVM: get rid of S2_PGD_SIZE   Christoffer Dall
  • [PATCH v3 6/7] ARM: KVM: get rid of S2_PGD_SIZE   Christoffer Dall
• [PATCH v2 0/3] Separate generic header usage from ARCH_MULTIPLATFORM   Jonathan Austin
  • [PATCH v2 1/3] ARM: allow platforms to use generic headers without ARCH_MULTIPLATFORM   Jonathan Austin
    • [PATCH v2 1/3] ARM: allow platforms to use generic headers without ARCH_MULTIPLATFORM   Rob Herring
      • [PATCH v2 1/3] ARM: allow platforms to use generic headers without ARCH_MULTIPLATFORM   Tony Lindgren
      • [PATCH v2 1/3] ARM: allow platforms to use generic headers without ARCH_MULTIPLATFORM   Jonathan Austin
      • [PATCH v2 1/3] ARM: allow platforms to use generic headers without ARCH_MULTIPLATFORM   Tony Lindgren
      • [PATCH v2 1/3] ARM: allow platforms to use generic headers without ARCH_MULTIPLATFORM   Jonathan Austin
  • [PATCH v2 2/3] ARM: nommu: re-enable use of vexpress without ARCH_MULTIPLATFORM   Jonathan Austin
    • [PATCH v2 2/3] ARM: nommu: re-enable use of vexpress without ARCH_MULTIPLATFORM   Pawel Moll
  • [PATCH v2 3/3] ARM: vexpress-nommu: add a Makefile.boot to restore single-platform build   Jonathan Austin
• [PATCH] pinctrl: generic: Fix typos and clarify comments   Linus Walleij
• [PATCH 0/7] NOMMU fixes and preparation for NOMMU/SMP   Jonathan Austin
  • [PATCH 1/7] ARM: nommu: add entry point for secondary CPUs to head-nommu.S   Jonathan Austin
  • [PATCH 2/7] ARM: nommu: define dummy TLB operations for nommu configurations   Jonathan Austin
  • [PATCH 3/7] ARM: nommu: provide dummy cpu_switch_mm implementation   Jonathan Austin
  • [PATCH 4/7] ARM: nommu: do not initialise page tables in secondary_data structure   Jonathan Austin
  • [PATCH 5/7] ARM: suspend: fix CPU suspend code for !CONFIG_MMU configurations   Jonathan Austin
  • [PATCH 6/7] ARM: nommu: Don't build smp_tlb.c for !CONFIG_MMU   Jonathan Austin
  • [PATCH 7/7] ARM: nommu: add stub local_flush_bp_all() for !CONFIG_MMUU   Jonathan Austin
• [PATCH 0/3] Support for the ARM Cortex-R7 Processor   Jonathan Austin
  • [PATCH 1/3] ARM: select CPU_CPU15_MMU/MPU appropriately   Jonathan Austin
  • [PATCH 2/3] ARM: add Cortex-R7 Processor Info   Jonathan Austin
  • [PATCH 3/3] ARM: vexpress: Add Cortex-R Series UART, selectable via DEBUG_LL   Jonathan Austin
• [PATCH v2 0/2] ARM: KVM: Moving GIC/timer out of arch/arm   Marc Zyngier
  • [PATCH v2 1/2] ARM: KVM: move GIC/timer code to a common location   Marc Zyngier
    • [PATCH v2 1/2] ARM: KVM: move GIC/timer code to a common location   Paolo Bonzini
  • [PATCH v2 2/2] KVM: get rid of $(addprefix ../../../virt/kvm/, ...) in Makefiles   Marc Zyngier
    • [PATCH v2 2/2] KVM: get rid of $(addprefix ../../../virt/kvm/, ...) in Makefiles   Paolo Bonzini
      • [PATCH v2 2/2] KVM: get rid of $(addprefix ../../../virt/kvm/, ...) in Makefiles   Marc Zyngier
    • [PATCH v2 2/2] KVM: get rid of $(addprefix ../../../virt/kvm/, ...) in Makefiles   Zhang, Xiantao
• [PATCH RESEND] ARM: EXYNOS: no more support non-DT for EXYNOS SoCs   Kukjin Kim
• [PATCH] mmc: mmci: Fixup regulator handling for vqmmc   Ulf Hansson
• [PATCH 0/8] ARM: MPU Support for PMSAv7 processors   Jonathan Austin
  • [PATCH 1/8] ARM: mpu: add PMSA related registers and bitfields to existing headers   Jonathan Austin
  • [PATCH 4/8] ARM: mpu: add MPU probe and initialisation functions in C   Jonathan Austin
  • [PATCH 5/8] ARM: mpu: Complete initialisation of the MPU after reaching the C-world   Jonathan Austin
  • [PATCH 6/8] ARM: mpu: add MPU initialisation for secondary cores   Jonathan Austin
  • [PATCH 7/8] ARM: mpu: Allow enabling of the MPU via kconfig   Jonathan Austin
  • [PATCH 8/8] ARM: mpu: protect the vectors page with an MPU region   Jonathan Austin
• [PATCH 2/8] ARM: mpu: add header for MPU register layouts and region data   Jonathan Austin
• [PATCH 3/8] ARM: mpu: add early bring-up code for the ARMv7 PMSA-compliant MPU   Jonathan Austin
• [PATCH] watchdog: sirf: add watchdog driver of CSR SiRFprimaII and SiRFatlasVI   Barry Song
• [PATCH] mfd: db8500-prcmu: Update stored DSI PLL divider value   Ulf Hansson
  • [PATCH] mfd: db8500-prcmu: Update stored DSI PLL divider value   Lee Jones
• [PATCH v3 0/2] ARM: KVM: Moving GIC/timer out of arch/arm   Marc Zyngier
  • [PATCH v3 2/2] KVM: get rid of $(addprefix ../../../virt/kvm/, ...) in Makefiles   Marc Zyngier
    • [PATCH v3 2/2] KVM: get rid of $(addprefix ../../../virt/kvm/, ...) in Makefiles   Gleb Natapov
    • [PATCH v3 2/2] KVM: get rid of $(addprefix ../../../virt/kvm/, ...) in Makefiles   Christian Borntraeger
  • [PATCH v3 0/2] ARM: KVM: Moving GIC/timer out of arch/arm   Gleb Natapov
• [PATCH v3 1/2] ARM: KVM: move GIC/timer code to a common location   Marc Zyngier
• [PATCH RESEND] pinctrl:sirf:re-arch and add support for new SiRFatlas6 SoC   Linus Walleij
• [PATCH v4 00/32] Port of KVM to arm64   Marc Zyngier
  • [PATCH v4 01/32] arm64: KVM: define HYP and Stage-2 translation page flags   Marc Zyngier
    • [PATCH v4 01/32] arm64: KVM: define HYP and Stage-2 translation page flags   Catalin Marinas
  • [PATCH v4 03/32] arm64: KVM: EL2 register definitions   Marc Zyngier
    • [PATCH v4 03/32] arm64: KVM: EL2 register definitions   Catalin Marinas
  • [PATCH v4 06/32] arm64: KVM: fault injection into a guest   Marc Zyngier
    • [PATCH v4 06/32] arm64: KVM: fault injection into a guest   Catalin Marinas
  • [PATCH v4 07/32] arm64: KVM: architecture specific MMU backend   Marc Zyngier
    • [PATCH v4 07/32] arm64: KVM: architecture specific MMU backend   Catalin Marinas
      • [PATCH v4 07/32] arm64: KVM: architecture specific MMU backend   Marc Zyngier
      • [PATCH v4 07/32] arm64: KVM: architecture specific MMU backend   Catalin Marinas
      • [PATCH v4 07/32] arm64: KVM: architecture specific MMU backend   Marc Zyngier
  • [PATCH v4 08/32] arm64: KVM: user space interface   Marc Zyngier
    • [PATCH v4 08/32] arm64: KVM: user space interface   Catalin Marinas
  • [PATCH v4 09/32] arm64: KVM: system register handling   Marc Zyngier
    • [PATCH v4 09/32] arm64: KVM: system register handling   Catalin Marinas
  • [PATCH v4 10/32] arm64: KVM: CPU specific system registers handling   Marc Zyngier
    • [PATCH v4 10/32] arm64: KVM: CPU specific system registers handling   Catalin Marinas
  • [PATCH v4 11/32] arm64: KVM: virtual CPU reset   Marc Zyngier
    • [PATCH v4 11/32] arm64: KVM: virtual CPU reset   Catalin Marinas
  • [PATCH v4 12/32] arm64: KVM: kvm_arch and kvm_vcpu_arch definitions   Marc Zyngier
    • [PATCH v4 12/32] arm64: KVM: kvm_arch and kvm_vcpu_arch definitions   Catalin Marinas
  • [PATCH v4 13/32] arm64: KVM: MMIO access backend   Marc Zyngier
    • [PATCH v4 13/32] arm64: KVM: MMIO access backend   Catalin Marinas
  • [PATCH v4 14/32] arm64: KVM: guest one-reg interface   Marc Zyngier
    • [PATCH v4 14/32] arm64: KVM: guest one-reg interface   Catalin Marinas
      • [PATCH v4 14/32] arm64: KVM: guest one-reg interface   Marc Zyngier
  • [PATCH v4 15/32] arm64: KVM: hypervisor initialization code   Marc Zyngier
    • [PATCH v4 15/32] arm64: KVM: hypervisor initialization code   Catalin Marinas
      • [PATCH v4 15/32] arm64: KVM: hypervisor initialization code   Marc Zyngier
  • [PATCH v4 16/32] arm64: KVM: HYP mode world switch implementation   Marc Zyngier
    • [PATCH v4 16/32] arm64: KVM: HYP mode world switch implementation   Catalin Marinas
      • [PATCH v4 16/32] arm64: KVM: HYP mode world switch implementation   Marc Zyngier
  • [PATCH v4 17/32] arm64: KVM: Exit handling   Marc Zyngier
    • [PATCH v4 17/32] arm64: KVM: Exit handling   Catalin Marinas
  • [PATCH v4 18/32] arm64: KVM: Plug the VGIC   Marc Zyngier
    • [PATCH v4 18/32] arm64: KVM: Plug the VGIC   Catalin Marinas
  • [PATCH v4 19/32] arm64: KVM: Plug the arch timer   Marc Zyngier
    • [PATCH v4 19/32] arm64: KVM: Plug the arch timer   Catalin Marinas
  • [PATCH v4 20/32] arm64: KVM: PSCI implementation   Marc Zyngier
    • [PATCH v4 20/32] arm64: KVM: PSCI implementation   Catalin Marinas
  • [PATCH v4 21/32] arm64: KVM: Build system integration   Marc Zyngier
    • [PATCH v4 21/32] arm64: KVM: Build system integration   Catalin Marinas
      • [PATCH v4 21/32] arm64: KVM: Build system integration   Paolo Bonzini
      • [PATCH v4 21/32] arm64: KVM: Build system integration   Marc Zyngier
      • [PATCH v4 21/32] arm64: KVM: Build system integration   Catalin Marinas
      • [PATCH v4 21/32] arm64: KVM: Build system integration   Paolo Bonzini
  • [PATCH v4 22/32] arm64: KVM: define 32bit specific registers   Marc Zyngier
    • [PATCH v4 22/32] arm64: KVM: define 32bit specific registers   Catalin Marinas
  • [PATCH v4 23/32] arm64: KVM: 32bit GP register access   Marc Zyngier
    • [PATCH v4 23/32] arm64: KVM: 32bit GP register access   Catalin Marinas
  • [PATCH v4 24/32] arm64: KVM: 32bit conditional execution emulation   Marc Zyngier
    • [PATCH v4 24/32] arm64: KVM: 32bit conditional execution emulation   Catalin Marinas
  • [PATCH v4 25/32] arm64: KVM: 32bit handling of coprocessor traps   Marc Zyngier
    • [PATCH v4 25/32] arm64: KVM: 32bit handling of coprocessor traps   Catalin Marinas
  • [PATCH v4 26/32] arm64: KVM: CPU specific 32bit coprocessor access   Marc Zyngier
    • [PATCH v4 26/32] arm64: KVM: CPU specific 32bit coprocessor access   Catalin Marinas
  • [PATCH v4 27/32] arm64: KVM: 32bit specific register world switch   Marc Zyngier
    • [PATCH v4 27/32] arm64: KVM: 32bit specific register world switch   Catalin Marinas
  • [PATCH v4 28/32] arm64: KVM: 32bit guest fault injection   Marc Zyngier
    • [PATCH v4 28/32] arm64: KVM: 32bit guest fault injection   Catalin Marinas
  • [PATCH v4 29/32] arm64: KVM: enable initialization of a 32bit vcpu   Marc Zyngier
    • [PATCH v4 29/32] arm64: KVM: enable initialization of a 32bit vcpu   Catalin Marinas
  • [PATCH v4 30/32] arm64: KVM: userspace API documentation   Marc Zyngier
    • [PATCH v4 30/32] arm64: KVM: userspace API documentation   Catalin Marinas
  • [PATCH v4 31/32] arm64: KVM: MAINTAINERS update   Marc Zyngier
    • [PATCH v4 31/32] arm64: KVM: MAINTAINERS update   Catalin Marinas
  • [PATCH v4 32/32] arm64: KVM: document kernel object mappings in HYP   Marc Zyngier
    • [PATCH v4 32/32] arm64: KVM: document kernel object mappings in HYP   Catalin Marinas
• [PATCH v4 02/32] arm64: KVM: HYP mode idmap support   Marc Zyngier
  • [PATCH v4 02/32] arm64: KVM: HYP mode idmap support   Catalin Marinas
    • [PATCH v4 02/32] arm64: KVM: HYP mode idmap support   Marc Zyngier
• [PATCH v4 04/32] arm64: KVM: system register definitions for 64bit guests   Marc Zyngier
  • [PATCH v4 04/32] arm64: KVM: system register definitions for 64bit guests   Catalin Marinas
• [PATCH v4 05/32] arm64: KVM: Basic ESR_EL2 helpers and vcpu register access   Marc Zyngier
  • [PATCH v4 05/32] arm64: KVM: Basic ESR_EL2 helpers and vcpu register access   Catalin Marinas
    • [PATCH v4 05/32] arm64: KVM: Basic ESR_EL2 helpers and vcpu register access   Marc Zyngier
• [PATCH v3] ARM:dts:omap4-panda:Update the LED support for the panda DTS   Dan Murphy
  • [PATCH v3] ARM:dts:omap4-panda:Update the LED support for the panda DTS   Nishanth Menon
    • [PATCH v3] ARM:dts:omap4-panda:Update the LED support for the panda DTS   Dan Murphy
• [PATCH] ARM: Kirkwood: Enable USB 3.0 in kirkwood_defconfig   Andrew Lunn
  • [PATCH] ARM: Kirkwood: Enable USB 3.0 in kirkwood_defconfig   Jason Cooper
• [PATCH] picoxcell: remove redundant common.h   Jamie Iles
• [PATCH] dmaengine: sirf: set dma residue based on the current dma transfer position   Barry Song
  • [PATCH] dmaengine: sirf: set dma residue based on the current dma transfer position   Vinod Koul
• [PATCH] ASoC: remove saarb and tavorevb3 machine drivers   Paul Bolle
  • [PATCH] ASoC: remove saarb and tavorevb3 machine drivers   Arnd Bergmann
  • [PATCH] ASoC: remove saarb and tavorevb3 machine drivers   Haojian Zhuang
  • [PATCH] ASoC: remove saarb and tavorevb3 machine drivers   Mark Brown
• [PATCH][For 3.10-rc] ARM: zImage: Handle the case with 32bits memory size and address from ATAG and 64bits DTB   Gregory CLEMENT
  • [PATCH] ARM: zImage: Convert 32bits memory size and address from ATAG to 64bits DTB   Gregory CLEMENT
    • [PATCH] ARM: zImage: Convert 32bits memory size and address from ATAG to 64bits DTB   Nicolas Pitre
• [PATCHv2 00/20] Cleanup irqchip_init calls   Maxime Ripard
  • [PATCH 05/20] ARM: shmobile: ape6evm: Remove init_irq declaration in machine description   Maxime Ripard
    • [PATCH 05/20] ARM: shmobile: ape6evm: Remove init_irq declaration in machine description   Simon Horman
      • [PATCH 05/20] ARM: shmobile: ape6evm: Remove init_irq declaration in machine description   Simon Horman
      • [PATCH 05/20] ARM: shmobile: ape6evm: Remove init_irq declaration in machine description   Simon Horman
  • [PATCH 06/20] ARM: shmobile: kzm9g: Remove init_irq declaration in machine description   Maxime Ripard
    • [PATCH 06/20] ARM: shmobile: kzm9g: Remove init_irq declaration in machine description   Simon Horman
      • [PATCH 06/20] ARM: shmobile: kzm9g: Remove init_irq declaration in machine description   Simon Horman
  • [PATCH 07/20] ARM: shmobile: lager: Remove init_irq declaration in machine description   Maxime Ripard
    • [PATCH 07/20] ARM: shmobile: lager: Remove init_irq declaration in machine description   Simon Horman
    • [PATCH 07/20] ARM: shmobile: lager: Remove init_irq declaration in machine description   Simon Horman
  • [PATCH 08/20] ARM: shmobile: emev2: Remove init_irq declaration in machine description   Maxime Ripard
    • [PATCH 08/20] ARM: shmobile: emev2: Remove init_irq declaration in machine description   Simon Horman
      • [PATCH 08/20] ARM: shmobile: emev2: Remove init_irq declaration in machine description   Simon Horman
  • [PATCH 09/20] ARM: shmobile: r8a73a4: Remove init_irq declaration in machine description   Maxime Ripard
    • [PATCH 09/20] ARM: shmobile: r8a73a4: Remove init_irq declaration in machine description   Simon Horman
  • [PATCH 10/20] ARM: shmobile: r8a7790: Remove init_irq declaration in machine description   Maxime Ripard
    • [PATCH 10/20] ARM: shmobile: r8a7790: Remove init_irq declaration in machine description   Simon Horman
  • [PATCH 11/20] ARM: shmobile: sh73a0: Remove init_irq declaration in machine description   Maxime Ripard
    • [PATCH 11/20] ARM: shmobile: sh73a0: Remove init_irq declaration in machine description   Simon Horman
  • [PATCH 12/20] ARM: bcm281xx: Remove init_irq declaration in machine description   Maxime Ripard
    • [PATCH 12/20] ARM: bcm281xx: Remove init_irq declaration in machine description   Christian Daudt
  • [PATCH 13/20] ARM: spear: Remove init_irq declaration in machine description   Maxime Ripard
  • [PATCH 14/20] ARM: msm: Remove init_irq declaration in machine description   Maxime Ripard
    • [PATCH 14/20] ARM: msm: Remove init_irq declaration in machine description   David Brown
  • [PATCH 15/20] ARM: mvebu: Remove init_irq declaration in machine description   Maxime Ripard
    • [PATCH 15/20] ARM: mvebu: Remove init_irq declaration in machine description   Jason Cooper
  • [PATCH 16/20] ARM: mxs: Remove init_irq declaration in machine description   Maxime Ripard
    • [PATCH 16/20] ARM: mxs: Remove init_irq declaration in machine description   Shawn Guo
  • [PATCH 17/20] ARM: sirf: Remove init_irq declaration in machine description   Maxime Ripard
  • [PATCH 18/20] ARM: vexpress: Remove init_irq declaration in machine description   Maxime Ripard
  • [PATCH 19/20] ARM: virt: Remove init_irq declaration in machine description   Maxime Ripard
  • [PATCH 20/20] ARM: vt8500: Remove init_irq declaration in machine description   Maxime Ripard
    • [PATCH 20/20] ARM: vt8500: Remove init_irq declaration in machine description   Tony Prisk
      • [PATCH 20/20] ARM: vt8500: Remove init_irq declaration in machine description   Maxime Ripard
  • [PATCHv2 00/20] Cleanup irqchip_init calls   Arnd Bergmann
    • [PATCHv2 00/20] Cleanup irqchip_init calls   Maxime Ripard
• [PATCH 01/20] ARM: sunxi: Remove init_irq declaration in machine description   Maxime Ripard
• [PATCH 02/20] ARM: zynq: Remove init_irq declaration in machine description   Maxime Ripard
  • [PATCH 02/20] ARM: zynq: Remove init_irq declaration in machine description   Michal Simek
• [PATCH 03/20] ARM: nomadik: Remove init_irq declaration in machine description   Maxime Ripard
• [PATCH 04/20] ARM: picoxcell: Remove init_irq declaration in machine description   Maxime Ripard
  • [PATCH 04/20] ARM: picoxcell: Remove init_irq declaration in machine description   Jamie Iles
    • [PATCH 04/20] ARM: picoxcell: Remove init_irq declaration in machine description   Maxime Ripard
      • [PATCH 04/20] ARM: picoxcell: Remove init_irq declaration in machine description   Jamie Iles
• [PATCH] ARM: at91/trivial: typo in GEM compatible string   Nicolas Ferre
• [PATCH] ARM : omap : remove __init for _enable_preprogram   jp.francois at cynove.com
  • [PATCH] ARM : omap : remove __init for _enable_preprogram   Kevin Hilman
    • [PATCH] ARM : omap : remove __init for _enable_preprogram   Tony Lindgren
  • [PATCH] ARM : omap : remove __init for _enable_preprogram   Greg KH
• [PATCH] ARM: vfp: ensure VFP_arch is non-zero when VFP is not supported   Will Deacon
• Naming convention DSI + device tree   David Lanzendörfer
  • Naming convention DSI + device tree   Stephen Warren
    • Naming convention DSI + device tree   David Lanzendörfer
      • Naming convention DSI + device tree   Stephen Warren
      • Naming convention DSI + device tree   David Lanzendörfer
      • Naming convention DSI + device tree   Alex Courbot
      • Naming convention DSI + device tree   Stephen Warren
      • Naming convention DSI + device tree   Mark Zhang
      • Naming convention DSI + device tree   Alex Courbot
• SIGSEGV changing pc register (help for my master thesis on ARM/linux kernel)   ocean
  • SIGSEGV changing pc register (help for my master thesis on ARM/linux kernel)   ocean
• [PATCH] clk: ux500: abx500-clk: rename ux500 audio codec aliases   Mike Turquette
• [PATCH 1/2] clk: sun5i: Add compatibles for Allwinner A13   Mike Turquette
• [PATCHv2] arm: mm: Use phys_addr_t properly for ioremap functions   Laura Abbott
  • [PATCHv2] arm: mm: Use phys_addr_t properly for ioremap functions   Arnd Bergmann
    • [PATCHv2] arm: mm: Use phys_addr_t properly for ioremap functions   Russell King - ARM Linux
• hwrng: picoxcell: PICOXCELL_PC3X3?   Paul Bolle
  • hwrng: picoxcell: PICOXCELL_PC3X3?   Jamie Iles
• [PATCH 1/3] ARM: shmobile: irqpin: fix handling of spurious interrupts in DT case   Laurent Pinchart
• [PATCH 1/5] ARM: socfpga: dts: Add ethernet bindings for SOCFPGA   dinguyen at altera.com
  • [PATCH 2/5] ARM: socfpga: dts: Add gate-clock bindings   dinguyen at altera.com
    • [PATCH 2/5] ARM: socfpga: dts: Add gate-clock bindings   Pavel Machek
  • [PATCH 3/5] ARM: socfpga: Add support to gate peripheral clocks   dinguyen at altera.com
    • [PATCH 3/5] ARM: socfpga: Add support to gate peripheral clocks   Pavel Machek
  • [PATCH 4/5] ARM: socfpga: dts: Add support for SD/MMC   dinguyen at altera.com
    • [PATCH 4/5] ARM: socfpga: dts: Add support for SD/MMC   Pavel Machek
  • [PATCH 5/5] mmc: dw_mmc: Add support DW SD/MMC driver on SOCFPGA   dinguyen at altera.com
    • [PATCH 5/5] mmc: dw_mmc: Add support DW SD/MMC driver on SOCFPGA   Jaehoon Chung
      • [PATCH 5/5] mmc: dw_mmc: Add support DW SD/MMC driver on SOCFPGA   Dinh Nguyen
    • [PATCH 5/5] mmc: dw_mmc: Add support DW SD/MMC driver on SOCFPGA   Arnd Bergmann
      • [PATCH 5/5] mmc: dw_mmc: Add support DW SD/MMC driver on SOCFPGA   Dinh Nguyen
      • [PATCH 5/5] mmc: dw_mmc: Add support DW SD/MMC driver on SOCFPGA   Arnd Bergmann
      • [PATCH 5/5] mmc: dw_mmc: Add support DW SD/MMC driver on SOCFPGA   Dinh Nguyen
  • [PATCH 1/5] ARM: socfpga: dts: Add ethernet bindings for SOCFPGA   Pavel Machek
    • [PATCH 1/5] ARM: socfpga: dts: Add ethernet bindings for SOCFPGA   Dinh Nguyen
  • [PATCH 1/5] ARM: socfpga: dts: Add ethernet bindings for SOCFPGA   Arnd Bergmann
    • [PATCH 1/5] ARM: socfpga: dts: Add ethernet bindings for SOCFPGA   Dinh Nguyen
• [PATCH v3 00/20] SH pinctrl DT support   Laurent Pinchart
  • [PATCH v3 01/20] sh-pfc: Add DT support   Laurent Pinchart
    • [PATCH v3 01/20] sh-pfc: Add DT support   Guennadi Liakhovetski
      • [PATCH v3 01/20] sh-pfc: Add DT support   Laurent Pinchart
  • [PATCH v3 02/20] ARM: shmobile: r8a73a4: Add pin control device to device tree   Laurent Pinchart
  • [PATCH v3 03/20] ARM: shmobile: r8a7740: Add pin control device to device tree   Laurent Pinchart
  • [PATCH v3 04/20] ARM: shmobile: r8a7778: Add pin control device to device tree   Laurent Pinchart
  • [PATCH v3 05/20] ARM: shmobile: r8a7778: Add GPIO controller devices to device tree   Laurent Pinchart
  • [PATCH v3 06/20] ARM: shmobile: r8a7779: Add pin control device to device tree   Laurent Pinchart
  • [PATCH v3 07/20] ARM: shmobile: r8a7779: Add GPIO controller devices to device tree   Laurent Pinchart
  • [PATCH v3 08/20] ARM: shmobile: r8a7790: Add pin control device to device tree   Laurent Pinchart
  • [PATCH v3 09/20] ARM: shmobile: r8a7790: Add GPIO controller devices to device tree   Laurent Pinchart
    • [PATCH v3 09/20] ARM: shmobile: r8a7790: Add GPIO controller devices to device tree   Guennadi Liakhovetski
      • [PATCH v3 09/20] ARM: shmobile: r8a7790: Add GPIO controller devices to device tree   Laurent Pinchart
    • [PATCH v3 09/20] ARM: shmobile: r8a7790: Add GPIO controller devices to device tree   Guennadi Liakhovetski
      • [PATCH v3 09/20] ARM: shmobile: r8a7790: Add GPIO controller devices to device tree   Laurent Pinchart
      • [PATCH v3 09/20] ARM: shmobile: r8a7790: Add GPIO controller devices to device tree   Guennadi Liakhovetski
      • [PATCH v3 09/20] ARM: shmobile: r8a7790: Add GPIO controller devices to device tree   Laurent Pinchart
      • [PATCH v3 09/20] ARM: shmobile: r8a7790: Add GPIO controller devices to device tree   Guennadi Liakhovetski
  • [PATCH v3 10/20] ARM: shmobile: sh7372: Add pin control device to device tree   Laurent Pinchart
  • [PATCH v3 11/20] ARM: shmobile: sh73a0: Add pin control device to device tree   Laurent Pinchart
  • [PATCH v3 12/20] ARM: shmobile: armadillo-reference: Move pinctrl mappings to device tree   Laurent Pinchart
  • [PATCH v3 13/20] ARM: shmobile: armadillo-reference: Add st1232 pin mappings   Laurent Pinchart
  • [PATCH v3 14/20] ARM: shmobile: armadillo-reference: Move st1232 reset GPIO to DT   Laurent Pinchart
  • [PATCH v3 15/20] ARM: shmobile: armadillo-reference: Add LED1-LED4 to the device tree   Laurent Pinchart
  • [PATCH v3 16/20] ARM: shmobile: kzm9g-reference: Move pinctrl mappings to device tree   Laurent Pinchart
  • [PATCH v3 17/20] ARM: shmobile: kzm9g-reference: Move SDHI regulators to DT   Laurent Pinchart
  • [PATCH v3 18/20] ARM: shmobile: kzm9g-reference: Add LED1-LED4 to the device tree   Laurent Pinchart
  • [PATCH v3 19/20] ARM: shmobile: marzen-reference: Move pinctrl mappings to device tree   Laurent Pinchart
  • [PATCH v3 20/20] ARM: shmobile: marzen-reference: Add LED2-LED4 to the device tree   Laurent Pinchart
• [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703   Tony Lindgren
  • [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703   Mark A. Greer
    • [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703   Tony Lindgren
      • [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703   Mark A. Greer
      • [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703   Yegor Yefremov
      • [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703   Tony Lindgren
      • [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703   Tony Lindgren
      • [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703   Mark A. Greer
      • [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703   Mark A. Greer
      • [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703   Yegor Yefremov
      • [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703   Tony Lindgren
      • [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703   Yegor Yefremov
      • [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703   Mark A. Greer
      • [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703   Kevin Hilman
      • [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703   Yegor Yefremov
    • [PATCH] ARM: OMAP3: Fix iva2_pwrdm settings for 3703   Mark A. Greer
• [PATCH v2 0/4] marzen-reference ethernet patches   Simon Horman
  • [PATCH v2 2/4] ARM: shmobile: marzen-reference: Update lan device name in pinctrl maps   Simon Horman
• [PATCH v2 1/4] ARM: shmobile: marzen-reference: Reference the correct IRQ for ethernet   Simon Horman
• [PATCH v2 3/4] ARM: shmobile: marzen-reference: Initialise irqpin   Simon Horman
  • [PATCH v2 3/4] ARM: shmobile: marzen-reference: Initialise irqpin   Laurent Pinchart
    • [PATCH v2 3/4] ARM: shmobile: marzen-reference: Initialise irqpin   Simon Horman
• [PATCH v2 4/4] ARM: shmobile: marzen-reference: Set SMSC lan to use irq-push-pull   Simon Horman
  • [PATCH v2 4/4] ARM: shmobile: marzen-reference: Set SMSC lan to use irq-push-pull   Laurent Pinchart
• [RFC PATCH] ARM: SOCFPGA: Enable PMU through the CTI   dinguyen at altera.com
  • [RFC PATCH] ARM: SOCFPGA: Enable PMU through the CTI   Will Deacon
  • [RFC PATCH] ARM: SOCFPGA: Enable PMU through the CTI   Pavel Machek
• [PATCH v1] ARM: DMA-mapping: mark all !DMA_TO_DEVICE pages in unmapping as clean   Ming Lei
• [PATCH] ARM: dts: omap3 beagle: Add usb otg hs dt data   Kishon Vijay Abraham I
• [PATCH] drivers/rtc/rtc-sirfsoc.c: add rtc drivers for CSR SiRFprimaII and SiRFatlasVI   Barry Song
• [PATCH 2/2] ARM: sun5i: Update the clock compatible strings   Maxime Ripard
• [PATCH 0/3 v3] net/macb: RX path enhancement   Nicolas Ferre
  • [PATCH 1/3 v3] net/macb: increase RX buffer size for GEM   Nicolas Ferre
  • [PATCH 2/3 v3] net/macb: change RX path for GEM   Nicolas Ferre
  • [PATCH 3/3 v3] net/macb: Try to optimize struct macb layout   Nicolas Ferre
    • [PATCH 3/3 v3] net/macb: Try to optimize struct macb layout   David Laight
      • [PATCH 3/3 v3] net/macb: Try to optimize struct macb layout   Nicolas Ferre
    • [PATCH 3/3 v3] net/macb: Try to optimize struct macb layout   David Laight
• [PATCH] ARM: crypto: sha1-armv4-large.S: fix SP handling   Ard Biesheuvel
  • [PATCH] ARM: crypto: sha1-armv4-large.S: fix SP handling   Nicolas Pitre
• [PATCH 0/4] mmc: mmci: Add support for UHS cards   Ulf Hansson
  • [PATCH 2/4] mmc: mmci: Support signal voltage switch for UHS cards   Ulf Hansson
  • [PATCH 0/4] mmc: mmci: Add support for UHS cards   Johan Rudholm
• [PATCH 1/4] mmc: mmci: Fixup regulator handling for vqmmc   Ulf Hansson
• [PATCH 3/4] mmc: mmci: Cache MMCIDATACTRL register   Ulf Hansson
• [PATCH 4/4] mmc: mmci: Add card_busy function to improve UHS card support   Ulf Hansson
• [PATCH 00/39] Continuation of DMA changes in ux500 based drivers   Lee Jones
  • [PATCH 01/39] dmaengine: ste_dma40: Separate Logical Global Interrupt Mask (GIM) unmasking   Lee Jones
    • [PATCH 01/39] dmaengine: ste_dma40: Separate Logical Global Interrupt Mask (GIM) unmasking   Linus Walleij
      • [PATCH 01/39] dmaengine: ste_dma40: Separate Logical Global Interrupt Mask (GIM) unmasking   Vinod Koul
      • [PATCH 01/39] dmaengine: ste_dma40: Separate Logical Global Interrupt Mask (GIM) unmasking   Lee Jones
  • [PATCH 02/39] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()   Lee Jones
    • [PATCH 02/39] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()   Linus Walleij
    • [PATCH 02/39] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()   Vinod Koul
      • [PATCH 02/39] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()   Lee Jones
      • [PATCH 02/39] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()   Vinod Koul
      • [PATCH 02/39] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()   Lee Jones
      • [PATCH 02/39] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()   Linus Walleij
  • [PATCH 03/39] dmaengine: ste_dma40: Don't configure runtime configurable setup during allocate   Lee Jones
    • [PATCH 03/39] dmaengine: ste_dma40: Don't configure runtime configurable setup during allocate   Linus Walleij
    • [PATCH 03/39] dmaengine: ste_dma40: Don't configure runtime configurable setup during allocate   Vinod Koul
  • [PATCH 04/39] ARM: ux500: Stop passing UART's platform data for Device Tree boots   Lee Jones
    • [PATCH 04/39] ARM: ux500: Stop passing UART's platform data for Device Tree boots   Linus Walleij
  • [PATCH 05/39] ARM: ux500: Stop passing MMC's platform data for Device Tree boots   Lee Jones
    • [PATCH 05/39] ARM: ux500: Stop passing MMC's platform data for Device Tree boots   Linus Walleij
  • [PATCH 06/39] ARM: ux500: Move SDI (MMC) and UART devices under more descriptive heading   Lee Jones
    • [PATCH 06/39] ARM: ux500: Move SDI (MMC) and UART devices under more descriptive heading   Linus Walleij
  • [PATCH 07/39] dmaengine: ste_dma40: Only use addresses passed as configuration information   Lee Jones
    • [PATCH 07/39] dmaengine: ste_dma40: Only use addresses passed as configuration information   Linus Walleij
    • [PATCH 07/39] dmaengine: ste_dma40: Only use addresses passed as configuration information   Vinod Koul
  • [PATCH 08/39] dmaengine: ste_dma40: Remove redundant address fetching function   Lee Jones
    • [PATCH 08/39] dmaengine: ste_dma40: Remove redundant address fetching function   Linus Walleij
    • [PATCH 08/39] dmaengine: ste_dma40: Remove redundant address fetching function   Vinod Koul
  • [PATCH 09/39] ARM: ux500: Remove DMA address look-up table   Lee Jones
    • [PATCH 09/39] ARM: ux500: Remove DMA address look-up table   Linus Walleij
  • [PATCH 10/39] dmaengine: ste_dma40: Correct copy/paste error   Lee Jones
    • [PATCH 10/39] dmaengine: ste_dma40: Correct copy/paste error   Linus Walleij
    • [PATCH 10/39] dmaengine: ste_dma40: Correct copy/paste error   Vinod Koul
  • [PATCH 11/39] ARM: ux500: Remove unnecessary attributes from DMA channel request pdata   Lee Jones
    • [PATCH 11/39] ARM: ux500: Remove unnecessary attributes from DMA channel request pdata   Linus Walleij
  • [PATCH 12/39] crypto: ux500/hash - Prepare clock before enabling it   Lee Jones
    • [PATCH 12/39] crypto: ux500/hash - Prepare clock before enabling it   Linus Walleij
      • [PATCH 12/39] crypto: ux500/hash - Prepare clock before enabling it   Lee Jones
      • [PATCH 12/39] crypto: ux500/hash - Prepare clock before enabling it   Herbert Xu
    • [PATCH 12/39] crypto: ux500/hash - Prepare clock before enabling it   Linus Walleij
  • [PATCH 13/39] crypto: ux500/hash - Set DMA configuration though dma_slave_config()   Lee Jones
    • [PATCH 13/39] crypto: ux500/hash - Set DMA configuration though dma_slave_config()   Linus Walleij
    • [PATCH 13/39] crypto: ux500/hash - Set DMA configuration though dma_slave_config()   Herbert Xu
    • [PATCH 13/39] crypto: ux500/hash - Set DMA configuration though dma_slave_config()   Linus Walleij
  • [PATCH 14/39] ARM: ux500: Stop passing Hash DMA channel config information though pdata   Lee Jones
    • [PATCH 14/39] ARM: ux500: Stop passing Hash DMA channel config information though pdata   Linus Walleij
  • [PATCH 15/39] crypto: ux500/cryp - Prepare clock before enabling it   Lee Jones
    • [PATCH 15/39] crypto: ux500/cryp - Prepare clock before enabling it   Linus Walleij
    • [PATCH 15/39] crypto: ux500/cryp - Prepare clock before enabling it   Herbert Xu
    • [PATCH 15/39] crypto: ux500/cryp - Prepare clock before enabling it   Linus Walleij
  • [PATCH 16/39] crypto: ux500/cryp - Set DMA configuration though dma_slave_config()   Lee Jones
    • [PATCH 16/39] crypto: ux500/cryp - Set DMA configuration though dma_slave_config()   Herbert Xu
    • [PATCH 16/39] crypto: ux500/cryp - Set DMA configuration though dma_slave_config()   Linus Walleij
  • [PATCH 17/39] ARM: ux500: Stop passing Cryp DMA channel config information though pdata   Lee Jones
  • [PATCH 18/39] crypto: ux500/[cryp|hash] - Show successful start-up in the bootlog   Lee Jones
    • [PATCH 18/39] crypto: ux500/[cryp|hash] - Show successful start-up in the bootlog   Herbert Xu
    • [PATCH 18/39] crypto: ux500/[cryp|hash] - Show successful start-up in the bootlog   Linus Walleij
  • [PATCH 19/39] ARM: ux500: Register Cyrp and Hash platform drivers on Snowball   Lee Jones
    • [PATCH 19/39] ARM: ux500: Register Cyrp and Hash platform drivers on Snowball   Linus Walleij
  • [PATCH 20/39] usb: musb: ux500: move channel number knowledge into the driver   Lee Jones
    • [PATCH 20/39] usb: musb: ux500: move channel number knowledge into the driver   Linus Walleij
      • [PATCH 20/39] usb: musb: ux500: move channel number knowledge into the driver   Fabio Baltieri
      • [PATCH 20/39] usb: musb: ux500: move channel number knowledge into the driver   Linus Walleij
      • [PATCH 20/39] usb: musb: ux500: move channel number knowledge into the driver   Felipe Balbi
      • [PATCH 20/39] usb: musb: ux500: move channel number knowledge into the driver   Lee Jones
      • [PATCH 20/39] usb: musb: ux500: move channel number knowledge into the driver   Linus Walleij
    • [PATCH 20/39] usb: musb: ux500: move channel number knowledge into the driver   Linus Walleij
    • [PATCH 20/39] usb: musb: ux500: move channel number knowledge into the driver   Felipe Balbi
      • [PATCH 20/39] usb: musb: ux500: move channel number knowledge into the driver   Linus Walleij
      • [PATCH 20/39] usb: musb: ux500: move channel number knowledge into the driver   Lee Jones
      • [PATCH 20/39] usb: musb: ux500: move channel number knowledge into the driver   Felipe Balbi
    • [PATCH 20/39] usb: musb: ux500: move channel number knowledge into the driver   Linus Walleij
  • [PATCH 21/39] usb: musb: ux500: move the MUSB HDRC configuration into the driver   Lee Jones
    • [PATCH 21/39] usb: musb: ux500: move the MUSB HDRC configuration into the driver   Linus Walleij
  • [PATCH 22/39] usb: musb: ux500: take the dma_mask from coherent_dma_mask   Lee Jones
    • [PATCH 22/39] usb: musb: ux500: take the dma_mask from coherent_dma_mask   Linus Walleij
  • [PATCH 23/39] usb: musb: ux500: harden checks for platform data   Lee Jones
    • [PATCH 23/39] usb: musb: ux500: harden checks for platform data   Linus Walleij
  • [PATCH 24/39] usb: musb: ux500: attempt to find channels by name before using pdata   Lee Jones
    • [PATCH 24/39] usb: musb: ux500: attempt to find channels by name before using pdata   Linus Walleij
  • [PATCH 25/39] usb: musb: ux500: add device tree probing support   Lee Jones
    • [PATCH 25/39] usb: musb: ux500: add device tree probing support   Linus Walleij
  • [PATCH 26/39] ARM: ux500: Add an auxdata entry for MUSB for clock-name look-up   Lee Jones
    • [PATCH 26/39] ARM: ux500: Add an auxdata entry for MUSB for clock-name look-up   Linus Walleij
  • [PATCH 27/39] ARM: ux500: Remove ux500-musb platform registation when booting with DT   Lee Jones
    • [PATCH 27/39] ARM: ux500: Remove ux500-musb platform registation when booting with DT   Linus Walleij
  • [PATCH 28/39] ARM: ux500: Remove empty function u8500_of_init_devices()   Lee Jones
    • [PATCH 28/39] ARM: ux500: Remove empty function u8500_of_init_devices()   Linus Walleij
  • [PATCH 29/39] dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s   Lee Jones
    • [PATCH 29/39] dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s   Linus Walleij
  • [PATCH 30/39] ARM: ux500: Replace ST-E's home-brew DMA direction definition with the generic one   Lee Jones
    • [PATCH 30/39] ARM: ux500: Replace ST-E's home-brew DMA direction definition with the generic one   Linus Walleij
  • [PATCH 31/39] dmaengine: ste_dma40: Replace ST-E's home-brew DMA direction defs with generic ones   Lee Jones
    • [PATCH 31/39] dmaengine: ste_dma40: Replace ST-E's home-brew DMA direction defs with generic ones   Vinod Koul
      • [PATCH 31/39] dmaengine: ste_dma40: Replace ST-E's home-brew DMA direction defs with generic ones   Lee Jones
      • [PATCH 31/39] dmaengine: ste_dma40: Replace ST-E's home-brew DMA direction defs with generic ones   Vinod Koul
    • [PATCH 31/39] dmaengine: ste_dma40: Replace ST-E's home-brew DMA direction defs with generic ones   Linus Walleij
  • [PATCH 32/39] ARM: ux500: Remove recently unused stedma40_xfer_dir enums   Lee Jones
    • [PATCH 32/39] ARM: ux500: Remove recently unused stedma40_xfer_dir enums   Linus Walleij
  • [PATCH 33/39] dmaengine: ste_dma40_ll: Use the BIT macro to replace ugly '(1 << x)'s   Lee Jones
    • [PATCH 33/39] dmaengine: ste_dma40_ll: Use the BIT macro to replace ugly '(1 << x)'s   Vinod Koul
    • [PATCH 33/39] dmaengine: ste_dma40_ll: Use the BIT macro to replace ugly '(1 << x)'s   Linus Walleij
  • [PATCH 34/39] dmaengine: ste_dma40: Convert data_width from register bit format to value   Lee Jones
    • [PATCH 34/39] dmaengine: ste_dma40: Convert data_width from register bit format to value   Vinod Koul
      • [PATCH 34/39] dmaengine: ste_dma40: Convert data_width from register bit format to value   Lee Jones
      • [PATCH 34/39] dmaengine: ste_dma40: Convert data_width from register bit format to value   Vinod Koul
    • [PATCH 34/39] dmaengine: ste_dma40: Convert data_width from register bit format to value   Linus Walleij
  • [PATCH 35/39] dmaengine: ste_dma40_ll: Replace meaningless register set with comment   Lee Jones
    • [PATCH 35/39] dmaengine: ste_dma40_ll: Replace meaningless register set with comment   Vinod Koul
      • [PATCH 35/39] dmaengine: ste_dma40_ll: Replace meaningless register set with comment   Lee Jones
    • [PATCH 35/39] dmaengine: ste_dma40_ll: Replace meaningless register set with comment   Linus Walleij
      • [PATCH 35/39] dmaengine: ste_dma40_ll: Replace meaningless register set with comment   Vinod Koul
  • [PATCH 36/39] dmaengine: ste_dma40: Allow memcpy channels to be configured from DT   Lee Jones
    • [PATCH 36/39] dmaengine: ste_dma40: Allow memcpy channels to be configured from DT   Vinod Koul
    • [PATCH 36/39] dmaengine: ste_dma40: Allow memcpy channels to be configured from DT   Linus Walleij
  • [PATCH 37/39] ARM: ux500: Stop passing DMA platform data though AUXDATA   Lee Jones
    • [PATCH 37/39] ARM: ux500: Stop passing DMA platform data though AUXDATA   Linus Walleij
  • [PATCH 38/39] dmaengine: ste_dma40: Fetch the number of physical channels from DT   Lee Jones
    • [PATCH 38/39] dmaengine: ste_dma40: Fetch the number of physical channels from DT   Vinod Koul
    • [PATCH 38/39] dmaengine: ste_dma40: Fetch the number of physical channels from DT   Linus Walleij
  • [PATCH 39/39] dmaengine: ste_dma40: Fetch disabled channels from DT   Lee Jones
    • [PATCH 39/39] dmaengine: ste_dma40: Fetch disabled channels from DT   Vinod Koul
    • [PATCH 39/39] dmaengine: ste_dma40: Fetch disabled channels from DT   Linus Walleij
• [PATCH 0/6] ARM: tegra114: add CPU hotplug support   Joseph Lo
  • [PATCH 1/6] ARM: tegra: add an assembly marco to check Tegra SoC ID   Joseph Lo
    • [PATCH 1/6] ARM: tegra: add an assembly marco to check Tegra SoC ID   Stephen Warren
      • [PATCH 1/6] ARM: tegra: add an assembly marco to check Tegra SoC ID   Joseph Lo
      • [PATCH 1/6] ARM: tegra: add an assembly marco to check Tegra SoC ID   Stephen Warren
  • [PATCH 2/6] ARM: tegra: skip SCU and PL310 code when CPU is not Cortex-A9   Joseph Lo
    • [PATCH 2/6] ARM: tegra: skip SCU and PL310 code when CPU is not Cortex-A9   Stephen Warren
      • [PATCH 2/6] ARM: tegra: skip SCU and PL310 code when CPU is not Cortex-A9   Joseph Lo
  • [PATCH 3/6] ARM: tegra: make tegra_resume can work for Tegra114   Joseph Lo
    • [PATCH 3/6] ARM: tegra: make tegra_resume can work for Tegra114   Stephen Warren
      • [PATCH 3/6] ARM: tegra: make tegra_resume can work for Tegra114   Joseph Lo
      • [PATCH 3/6] ARM: tegra: make tegra_resume can work for Tegra114   Stephen Warren
  • [PATCH 4/6] ARM: tegra114: add power up sequence for warm boot CPU   Joseph Lo
  • [PATCH 5/6] clk: tegra114: implement wait_for_reset and disable_clock for tegra_cpu_car_ops   Joseph Lo
    • [PATCH 5/6] clk: tegra114: implement wait_for_reset and disable_clock for tegra_cpu_car_ops   Stephen Warren
    • [PATCH 5/6] clk: tegra114: implement wait_for_reset and disable_clock for tegra_cpu_car_ops   Mike Turquette
  • [PATCH 6/6] ARM: tegra114: add CPU hotplug support   Joseph Lo
    • [PATCH 6/6] ARM: tegra114: add CPU hotplug support   Stephen Warren
      • [PATCH 6/6] ARM: tegra114: add CPU hotplug support   Joseph Lo
      • [PATCH 6/6] ARM: tegra114: add CPU hotplug support   Stephen Warren
  • [PATCH 0/6] ARM: tegra114: add CPU hotplug support   Stephen Warren
    • [PATCH 0/6] ARM: tegra114: add CPU hotplug support   Joseph Lo
      • [PATCH 0/6] ARM: tegra114: add CPU hotplug support   Stephen Warren
      • [PATCH 0/6] ARM: tegra114: add CPU hotplug support   Joseph Lo
      • [PATCH 0/6] ARM: tegra114: add CPU hotplug support   Russell King - ARM Linux
      • [PATCH 0/6] ARM: tegra114: add CPU hotplug support   Russell King - ARM Linux
• [GIT PULL] at91: fixes for 3.10 #1   Nicolas Ferre
  • [GIT PULL] at91: fixes for 3.10 #1   Olof Johansson
• [PATCH] ARM: OMAP4: change the device names in usb_bind_phy   Tomi Valkeinen
  • [PATCH] ARM: OMAP4: change the device names in usb_bind_phy   Tony Lindgren
    • [PATCH] ARM: OMAP4: change the device names in usb_bind_phy   Tomi Valkeinen
      • [PATCH] ARM: OMAP4: change the device names in usb_bind_phy   Tony Lindgren
      • [PATCH] ARM: OMAP4: change the device names in usb_bind_phy   Kishon Vijay Abraham I
      • [PATCH] ARM: OMAP4: change the device names in usb_bind_phy   Tony Lindgren
      • [PATCH] ARM: OMAP4: change the device names in usb_bind_phy   Florian Vaussard
• [PATCH] ARM: mach-moxart: platform port for MOXA ART SoC   Jonas Jensen
  • [PATCH] ARM: mach-moxart: platform port for MOXA ART SoC   Arnd Bergmann
    • [PATCH] ARM: mach-moxart: platform port for MOXA ART SoC   Russell King - ARM Linux
      • [PATCH] ARM: mach-moxart: platform port for MOXA ART SoC   Arnd Bergmann
      • [PATCH] ARM: mach-moxart: platform port for MOXA ART SoC   Russell King - ARM Linux
      • [PATCH] ARM: mach-moxart: platform port for MOXA ART SoC   Arnd Bergmann
      • [PATCH] ARM: mach-moxart: platform port for MOXA ART SoC   Jonas Jensen
    • [PATCH] ARM: mach-moxart: platform port for MOXA ART SoC   Jonas Jensen
      • [PATCH] ARM: mach-moxart: platform port for MOXA ART SoC   Arnd Bergmann
• [PATCH v2] pinctrl:sirf:re-arch and add support for new SiRFatlas6 SoC   Linus Walleij
• [PATCH 2/6] ARM: davinci: dm365 evm: remove init_enable from ths7303 pdata   Lad Prabhakar
  • [PATCH 2/6] ARM: davinci: dm365 evm: remove init_enable from ths7303 pdata   Laurent Pinchart
    • [PATCH 2/6] ARM: davinci: dm365 evm: remove init_enable from ths7303 pdata   Prabhakar Lad
      • [PATCH 2/6] ARM: davinci: dm365 evm: remove init_enable from ths7303 pdata   Prabhakar Lad
      • [PATCH 2/6] ARM: davinci: dm365 evm: remove init_enable from ths7303 pdata   Laurent Pinchart
  • [PATCH 2/6] ARM: davinci: dm365 evm: remove init_enable from ths7303 pdata   Prabhakar Lad
• v3.10-rc1: compile problem in arch/arm/common/mcpm_platsmp.c   Pavel Machek
  • v3.10-rc1: compile problem in arch/arm/common/mcpm_platsmp.c   Will Deacon
  • v3.10-rc1: compile problem in arch/arm/common/mcpm_platsmp.c   Jon Medhurst (Tixy)
• [PATCH] ARM: ux500: select REGULATOR   Emilio López
  • [PATCH] ARM: ux500: select REGULATOR   Linus Walleij
• [PATCH] spi: sirf: fix the issue while transferring more than 256 words   Barry Song
  • [PATCH] spi: sirf: fix the issue while transferring more than 256 words   Mark Brown
    • [PATCH] spi: sirf: fix the issue while transferring more than 256 words   Barry Song
      • [PATCH] spi: sirf: fix the issue while transferring more than 256 words   Mark Brown
• [PATCH 3/4] ARM: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead   Gregory CLEMENT
  • [PATCH 3/4] ARM: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead   Will Deacon
    • [PATCH 3/4] ARM: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead   Gregory CLEMENT
      • [PATCH 3/4] ARM: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead   Will Deacon
      • [PATCH 3/4] ARM: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead   Gregory CLEMENT
      • [PATCH 3/4] ARM: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead   Will Deacon
      • [PATCH 3/4] ARM: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead   Gregory CLEMENT
      • [PATCH 3/4] ARM: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead   Will Deacon
      • [PATCH 3/4] ARM: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead   Gregory CLEMENT
      • [PATCH 3/4] ARM: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead   Will Deacon
      • [PATCH 3/4] ARM: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead   Russell King - ARM Linux
• [PATCHv9 0/9] PCIe support for the Armada 370 and Armada XP SoCs   Thomas Petazzoni
  • [PATCHv9 3/9] of/pci: Add of_pci_get_devfn() function   Thomas Petazzoni
  • [PATCHv9 4/9] of/pci: Add of_pci_parse_bus_range() function   Thomas Petazzoni
  • [PATCHv9 5/9] clk: mvebu: create parent-child relation for PCIe clocks on Armada 370   Thomas Petazzoni
    • [PATCHv9 5/9] clk: mvebu: create parent-child relation for PCIe clocks on Armada 370   Mike Turquette
      • [PATCHv9 5/9] clk: mvebu: create parent-child relation for PCIe clocks on Armada 370   Thomas Petazzoni
      • [PATCHv9 5/9] clk: mvebu: create parent-child relation for PCIe clocks on Armada 370   Sebastian Hesselbarth
      • [PATCHv9 5/9] clk: mvebu: create parent-child relation for PCIe clocks on Armada 370   Jason Cooper
      • [PATCHv9 5/9] clk: mvebu: create parent-child relation for PCIe clocks on Armada 370   Mike Turquette
      • [PATCHv9 5/9] clk: mvebu: create parent-child relation for PCIe clocks on Armada 370   Jason Cooper
  • [PATCHv9 6/9] clk: mvebu: add more PCIe clocks for Armada XP   Thomas Petazzoni
  • [PATCHv9 7/9] pci: PCIe driver for Marvell Armada 370/XP systems   Thomas Petazzoni
    • [PATCHv9 7/9] pci: PCIe driver for Marvell Armada 370/XP systems   Ezequiel Garcia
      • [PATCHv9 7/9] pci: PCIe driver for Marvell Armada 370/XP systems   Jason Cooper
      • [PATCHv9 7/9] pci: PCIe driver for Marvell Armada 370/XP systems   Thomas Petazzoni
      • [PATCHv9 7/9] pci: PCIe driver for Marvell Armada 370/XP systems   Jason Cooper
      • [PATCHv9 7/9] pci: PCIe driver for Marvell Armada 370/XP systems   Thomas Petazzoni
      • [PATCHv9 7/9] pci: PCIe driver for Marvell Armada 370/XP systems   Jason Cooper
      • [PATCHv9 7/9] pci: PCIe driver for Marvell Armada 370/XP systems   Jason Cooper
  • [PATCHv9 8/9] arm: mvebu: PCIe support is now available on mvebu   Thomas Petazzoni
  • [PATCHv9 9/9] arm: mvebu: update defconfig with PCI and USB support   Thomas Petazzoni
• [PATCHv9 1/9] arm: mvebu: fix the 'ranges' property to handle PCIe   Thomas Petazzoni
• [PATCHv9 2/9] of/pci: Provide support for parsing PCI DT ranges property   Thomas Petazzoni
• [PATCHv4 0/9] Use the mvebu PCIe driver on Kirkwood   Thomas Petazzoni
  • [PATCHv4 5/9] arm: kirkwood: convert MPL CEC4 to use DT for the PCIe interface   Thomas Petazzoni
  • [PATCHv4 6/9] arm: kirkwood: convert ZyXEL NSA310 to use DT for the PCIe interface   Thomas Petazzoni
  • [PATCHv4 7/9] arm: kirkwood: convert QNAP TS219 to use DT for the PCIe interface   Thomas Petazzoni
  • [PATCHv4 8/9] arm: kirkwood: convert db-88f6281/db-88f6282 to the Device Tree   Thomas Petazzoni
  • [PATCHv4 9/9] arm: kirkwood: update defconfig with PCIe driver and board updates   Thomas Petazzoni
    • [PATCHv4 9/9] arm: kirkwood: update defconfig with PCIe driver and board updates   Jason Cooper
• [PATCHv4 1/9] pci: mvebu: enable driver usage on Kirkwood   Thomas Petazzoni
  • [PATCHv4 1/9] pci: mvebu: enable driver usage on Kirkwood   Jason Cooper
• [PATCHv4 2/9] arm: kirkwood: move PCIe window init to legacy driver   Thomas Petazzoni
• [PATCHv4 3/9] arm: kirkwood: add SoC-level Device Tree data for PCIe interfaces   Thomas Petazzoni
• [PATCHv4 4/9] arm: kirkwood: convert Iomega Iconnect to use DT for the PCIe interface   Thomas Petazzoni
• [PATCH v3 0/4] clk: implement remuxing during set_rate   James Hogan
  • [PATCH v3 2/4] clk: add support for clock reparent on set_rate   James Hogan
    • [PATCH v3 2/4] clk: add support for clock reparent on set_rate   Stephen Boyd
      • [PATCH v3 2/4] clk: add support for clock reparent on set_rate   James Hogan
    • [PATCH v3 2/4] clk: add support for clock reparent on set_rate   Stephen Boyd
      • [PATCH v3 2/4] clk: add support for clock reparent on set_rate   James Hogan
  • [PATCH v3 3/4] clk: add CLK_SET_RATE_NO_REPARENT flag   James Hogan
  • [PATCH v3 4/4] clk: clk-mux: implement remuxing on set_rate   James Hogan
• [PATCH v3 1/4] clk: abstract parent cache   James Hogan
  • [PATCH v3 1/4] clk: abstract parent cache   Stephen Boyd
• [RFC/PATCH] dma: of: Make of_dma_simple_xlate match on DMA device and channel ID   Laurent Pinchart
  • [RFC/PATCH] dma: of: Make of_dma_simple_xlate match on DMA device and channel ID   Lars-Peter Clausen
    • [RFC/PATCH] dma: of: Make of_dma_simple_xlate match on DMA device and channel ID   Laurent Pinchart
      • [RFC/PATCH] dma: of: Make of_dma_simple_xlate match on DMA device and channel ID   Lars-Peter Clausen
• [PATCH] Move PCIe node to correct place   Jay Agarwal
  • [PATCH] Move PCIe node to correct place   Stephen Warren
    • [PATCH] Move PCIe node to correct place   Jay Agarwal
• [PATCH 1/5] ARM: at91: dt: use #include for all device trees   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/5] ARM: at91: dt: switch to standard GPIO flag defines.   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 5/5] ARM: at91: dt: switch to standard IRQ flag defines   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] ARM: at91: dt: add pinctrl pre-processor define   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 3/5] ARM: at91: dt: add pinctrl pre-processor define   Linus Walleij
• [PATCH] arm: kirkwood: use the default of match table   Thomas Petazzoni
  • [PATCH] arm: kirkwood: use the default of match table   Jason Cooper
• [PATCH 0/5 v2] ARM: at91: dt: switch to pre-processor   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 0/5 v2] ARM: at91: dt: switch to pre-processor   Nicolas Ferre
    • [PATCH 0/5 v2] ARM: at91: dt: switch to pre-processor   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] ARM: at91: dt: switch to standard IRQ flag defines   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 0/6] ARM: OMAP2+: hwmod and SERIAL: Remove sysc handling from driver   Rajendra Nayak
  • [PATCH v3 4/6] ARM: OMAP2+: serial: Remove the un-used slave idle hooks   Rajendra Nayak
  • [PATCH v3 0/6] ARM: OMAP2+: hwmod and SERIAL: Remove sysc handling from driver   Paul Walmsley
    • [PATCH v3 0/6] ARM: OMAP2+: hwmod and SERIAL: Remove sysc handling from driver   Kevin Hilman
      • [PATCH v3 0/6] ARM: OMAP2+: hwmod and SERIAL: Remove sysc handling from driver   Paul Walmsley
      • [PATCH v3 0/6] ARM: OMAP2+: hwmod and SERIAL: Remove sysc handling from driver   Rajendra Nayak
• [PATCH v3 1/6] ARM: OMAP2+: hwmod: Fix sidle programming in _enable_sysc()/_idle_sysc()   Rajendra Nayak
• [PATCH v3 2/6] ARM: OMAP2+: hwmod: Add a new flag to handle SIDLE in SWSUP only in active   Rajendra Nayak
• [PATCH v3 3/6] ARM: OMAP2+: hwmod-data: UART IP needs software control to manage sidle modes   Rajendra Nayak
• [PATCH v3 5/6] SERIAL: OMAP: Remove the slave idle handling from the driver   Rajendra Nayak
• [PATCH v3 6/6] ARM: OMAP2+: hwmod: Remove sysc slave idle and auto idle apis   Rajendra Nayak
• [PATCH 1/1] ARM: at91: udpate defconfigs   Jean-Christophe PLAGNIOL-VILLARD
• [PATCHv2 1/3] arm: introduce config HAS_BANDGAP   Eduardo Valentin
  • [PATCHv2 1/3] arm: introduce config HAS_BANDGAP   Eduardo Valentin
  • [PATCHv2 1/3] arm: introduce config HAS_BANDGAP   Fabio Estevam
• [PATCHv2 2/3] arm: dts: add bandgap entry for OMAP443x devices   Eduardo Valentin
• [PATCHv2 3/3] arm: dts: add bandgap entry for OMAP4460 devices   Eduardo Valentin
  • [PATCHv2 3/3] arm: dts: add bandgap entry for OMAP4460 devices   Benoit Cousson
    • [PATCHv2 3/3] arm: dts: add bandgap entry for OMAP4460 devices   Eduardo Valentin
      • [PATCHv2 3/3] arm: dts: add bandgap entry for OMAP4460 devices   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCHv2 3/3] arm: dts: add bandgap entry for OMAP4460 devices   Eduardo Valentin
      • [PATCHv2 3/3] arm: dts: add bandgap entry for OMAP4460 devices   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCHv2 3/3] arm: dts: add bandgap entry for OMAP4460 devices   Benoit Cousson
      • [PATCHv2 3/3] arm: dts: add bandgap entry for OMAP4460 devices   Eduardo Valentin
      • [PATCHv2 3/3] arm: dts: add bandgap entry for OMAP4460 devices   Eduardo Valentin
      • [PATCHv2 3/3] arm: dts: add bandgap entry for OMAP4460 devices   Cousson, Benoit
      • [PATCHv2 3/3] arm: dts: add bandgap entry for OMAP4460 devices   Eduardo Valentin
• [PATCH] ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC   Tomasz Figa
  • [PATCH] ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC   Tomasz Figa
    • [PATCH] ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC   Kukjin Kim
    • [PATCH] ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC   Kukjin Kim
      • [PATCH] ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC   Tomasz Figa
      • [PATCH] ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC   Marek Szyprowski
• [PATCH] ARM: SAMSUNG: devs: Add names to fimd0 IRQ resources   Tomasz Figa
  • [PATCH] ARM: SAMSUNG: devs: Add names to fimd0 IRQ resources   Tomasz Figa
  • [PATCH] ARM: SAMSUNG: devs: Add names to fimd0 IRQ resources   Kukjin Kim
  • [PATCH] ARM: SAMSUNG: devs: Add names to fimd0 IRQ resources   Kukjin Kim
• [PATCH] rtc: max8998: Check for pdata presence before dereferencing   Tomasz Figa
  • [PATCH] rtc: max8998: Check for pdata presence before dereferencing   Sachin Kamat
  • [PATCH] rtc: max8998: Check for pdata presence before dereferencing   Tomasz Figa
  • [rtc-linux] [PATCH] rtc: max8998: Check for pdata presence before dereferencing   Andrew Morton
• [PATCH v2] ARM: at91: udpate defconfigs   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH v2] ARM: at91: udpate defconfigs   Nicolas Ferre
• [PATCHv2 0/5] arm: arch_timer cleanups and niceties   Mark Rutland
  • [PATCHv2 1/5] ARM: hyp: initialize CNTVOFF to zero   Mark Rutland
  • [PATCHv2 2/5] ARM: KVM: arch_timers: zero CNTVOFF upon return to host   Mark Rutland
  • [PATCHv2 3/5] clocksource: arch_timer: use virtual counters   Mark Rutland
    • [PATCHv2 3/5] clocksource: arch_timer: use virtual counters   Christopher Covington
  • [PATCHv2 4/5] arm: fix up ARM_ARCH_TIMER selects   Mark Rutland
    • [PATCHv2 4/5] arm: fix up ARM_ARCH_TIMER selects   Simon Horman
  • [PATCHv2 5/5] ARM: arch_timer: stop virtual timer when booted in HYP mode   Mark Rutland
• dmatest regression in 3.10-rc1   Will Deacon
  • dmatest regression in 3.10-rc1   Will Deacon
    • dmatest regression in 3.10-rc1   Vinod Koul
      • dmatest regression in 3.10-rc1   Will Deacon
      • dmatest regression in 3.10-rc1   Andy Shevchenko
      • dmatest regression in 3.10-rc1   Will Deacon
      • dmatest regression in 3.10-rc1   Andy Shevchenko
    • [PATCH] dmatest: abort transfers immediately when asked for   Andy Shevchenko
      • [PATCH] dmatest: abort transfers immediately when asked for   Will Deacon
      • [PATCH] dmatest: abort transfers immediately when asked for   Andy Shevchenko
      • [PATCH] dmatest: abort transfers immediately when asked for   Will Deacon
      • [PATCH] dmatest: abort transfers immediately when asked for   Andy Shevchenko
      • [PATCH] dmatest: abort transfers immediately when asked for   Vinod Koul
      • [PATCH] dmatest: abort transfers immediately when asked for   Andy Shevchenko
      • [PATCH] dmatest: abort transfers immediately when asked for   Vinod Koul
• [GIT PULL] ux500 fixes for v3.10-rc1+   Linus Walleij
  • [GIT PULL] ux500 fixes for v3.10-rc1+   Olof Johansson
    • [GIT PULL] ux500 fixes for v3.10-rc1+   Linus Walleij
• [PATCH v4] ARM:dts:omap4-panda: Update the LED support for the panda DTS   Dan Murphy
  • [PATCH v4] ARM:dts:omap4-panda: Update the LED support for the panda DTS   Nishanth Menon
    • [PATCH v4] ARM:dts:omap4-panda: Update the LED support for the panda DTS   Dan Murphy
      • [PATCH v4] ARM:dts:omap4-panda: Update the LED support for the panda DTS   Nishanth Menon
      • [PATCH v4] ARM:dts:omap4-panda: Update the LED support for the panda DTS   Dan Murphy
      • [PATCH v4] ARM:dts:omap4-panda: Update the LED support for the panda DTS   Nishanth Menon
• ux500 breaking multi-platform kernels   Rob Herring
  • ux500 breaking multi-platform kernels   Lee Jones
    • ux500 breaking multi-platform kernels   Lee Jones
  • ux500 breaking multi-platform kernels   Linus Walleij
    • ux500 breaking multi-platform kernels   Lee Jones
    • ux500 breaking multi-platform kernels   Rob Herring
  • ux500 breaking multi-platform kernels   Srinivas KANDAGATLA
• [PATCH v4 0/3] R8A7779/Marzen R-Car VIN driver support   Sergei Shtylyov
  • [PATCH v4 1/3] ARM: shmobile: r8a7779: add VIN support   Sergei Shtylyov
  • [PATCH v4 3/3] ARM: shmobile: Marzen: enable VIN and ADV7180 in defconfig   Sergei Shtylyov
• [PATCH v4 2/3] ARM: shmobile: Marzen: add VIN and ADV7180 support   Sergei Shtylyov
• u8500_defconfig: build failure in linux-next   Kevin Hilman
  • u8500_defconfig: build failure in linux-next   Linus Walleij
    • u8500_defconfig: build failure in linux-next   Kevin Hilman
• [PATCH v3 1/1] ARM: shmobile: r8a7778: add I2C support   Kuninori Morimoto
  • [PATCH v3 1/1] ARM: shmobile: r8a7778: add I2C support   Sergei Shtylyov
    • [PATCH v3 1/1] ARM: shmobile: r8a7778: add I2C support   Sergei Shtylyov
• [PATCH] i2c: sirf: move driver init from module_init to subsys_initcall   Barry Song
  • [PATCH] i2c: sirf: move driver init from module_init to subsys_initcall   Wolfram Sang
    • [PATCH] i2c: sirf: move driver init from module_init to subsys_initcall   Barry Song
      • [PATCH] i2c: sirf: move driver init from module_init to subsys_initcall   Mark Brown
      • [PATCH] i2c: sirf: move driver init from module_init to subsys_initcall   Barry Song
      • [PATCH] i2c: sirf: move driver init from module_init to subsys_initcall   Mark Brown
      • [PATCH] i2c: sirf: move driver init from module_init to subsys_initcall   Barry Song
• [PATCH] pinctrl: sirf: save the status in suspend and restore after resuming   Barry Song
  • [PATCH] pinctrl: sirf: save the status in suspend and restore after resuming   Linus Walleij
    • [PATCH] pinctrl: sirf: save the status in suspend and restore after resuming   Barry Song
• linux-next: manual merge of the renesas tree with Linus' tree   Stephen Rothwell
  • linux-next: manual merge of the renesas tree with Linus' tree   Simon Horman
    • linux-next: manual merge of the renesas tree with Linus' tree   Stephen Rothwell
• [PATCH v2] arm: prima2: use of_platform_populate instead of of_platform_bus_probe   Barry Song
• [PATCH] ARM: shmobile: marzen: Use error values in usb_power_*   Simon Horman
  • [PATCH] ARM: shmobile: marzen: Use error values in usb_power_*   Nguyen Hong Ky
  • [PATCH] ARM: shmobile: marzen: Use error values in usb_power_*   Simon Horman
    • [PATCH] ARM: shmobile: marzen: Use error values in usb_power_*   Sergei Shtylyov
      • [PATCH] ARM: shmobile: marzen: Use error values in usb_power_*   Simon Horman
• [PATCH] ASoC: omap-hdmi-codec: make the driver common for other SoCs   Barry Song
• [PATCH v3 0/4] Add initial Freescale Vybrid MVF600 support   Jingchang Lu
  • [PATCH v3 1/4] ARM: imx: add MVF600 clock support   Jingchang Lu
  • [PATCH v3 2/4] ARM: imx: add initial support for MVF600   Jingchang Lu
    • [PATCH v3 2/4] ARM: imx: add initial support for MVF600   Arnd Bergmann
      • [PATCH v3 2/4] ARM: imx: add initial support for MVF600   Shawn Guo
      • [PATCH v3 2/4] ARM: imx: add initial support for MVF600   Arnd Bergmann
      • [PATCH v3 2/4] ARM: imx: add initial support for MVF600   Arnd Bergmann
      • [PATCH v3 2/4] ARM: imx: add initial support for MVF600   Shawn Guo
      • [PATCH v3 2/4] ARM: imx: add initial support for MVF600   Arnd Bergmann
      • [PATCH v3 2/4] ARM: imx: add initial support for MVF600   Shawn Guo
      • [PATCH v3 2/4] ARM: imx: add initial support for MVF600   Shawn Guo
    • [PATCH v3 2/4] ARM: imx: add initial support for MVF600   Shawn Guo
    • [PATCH v3 2/4] ARM: imx: add initial support for MVF600   Shawn Guo
  • [PATCH v3 3/4] ARM: dts: add SoC level device tree source for MVF600   Jingchang Lu
    • [PATCH v3 3/4] ARM: dts: add SoC level device tree source for MVF600   Shawn Guo
  • [PATCH v3 4/4] ARM: dts: add initial MVF600 Tower board dts support   Jingchang Lu
    • [PATCH v3 4/4] ARM: dts: add initial MVF600 Tower board dts support   Shawn Guo
      • [PATCH v3 4/4] ARM: dts: add initial MVF600 Tower board dts support   Lu Jingchang-B35083
      • [PATCH v3 4/4] ARM: dts: add initial MVF600 Tower board dts support   Shawn Guo
• [PATCH v3] clocksource: add MVF600 pit timer support   Jingchang Lu
  • [PATCH v3] clocksource: add MVF600 pit timer support   Thomas Gleixner
    • [PATCH v3] clocksource: add MVF600 pit timer support   Lu Jingchang-B35083
  • [PATCH v3] clocksource: add MVF600 pit timer support   Shawn Guo
    • [PATCH v3] clocksource: add MVF600 pit timer support   Lu Jingchang-B35083
      • [PATCH v3] clocksource: add MVF600 pit timer support   Shawn Guo
      • [PATCH v3] clocksource: add MVF600 pit timer support   Lu Jingchang-B35083
• [PATCH v3] tty: serial: add Freescale lpuart driver support   Jingchang Lu
  • [PATCH v3] tty: serial: add Freescale lpuart driver support   Shawn Guo
    • [PATCH v3] tty: serial: add Freescale lpuart driver support   Jin Zhengxiong-R64188
      • [PATCH v3] tty: serial: add Freescale lpuart driver support   Sharma Bhupesh-B45370
      • [PATCH v3] tty: serial: add Freescale lpuart driver support   Shawn Guo
      • [PATCH v3] tty: serial: add Freescale lpuart driver support   Jin Zhengxiong-R64188
      • [PATCH v3] tty: serial: add Freescale lpuart driver support   Shawn Guo
      • [PATCH v3] tty: serial: add Freescale lpuart driver support   Jin Zhengxiong-R64188
      • [PATCH v3] tty: serial: add Freescale lpuart driver support   Shawn Guo
      • [PATCH v3] tty: serial: add Freescale lpuart driver support   Jin Zhengxiong-R64188
      • [PATCH v3] tty: serial: add Freescale lpuart driver support   Shawn Guo
• [PATCH v3 1/2] pinctrl: add MVF600 pinctrl driver   Jingchang Lu
  • [PATCH v3 1/2] pinctrl: add MVF600 pinctrl driver   Shawn Guo
    • [PATCH v3 1/2] pinctrl: add MVF600 pinctrl driver   Shawn Guo
      • [PATCH v3 1/2] pinctrl: add MVF600 pinctrl driver   Lu Jingchang-B35083
      • [PATCH v3 1/2] pinctrl: add MVF600 pinctrl driver   Shawn Guo
      • [PATCH v3 1/2] pinctrl: add MVF600 pinctrl driver   Linus Walleij
      • [PATCH v3 1/2] pinctrl: add MVF600 pinctrl driver   Lu Jingchang-B35083
      • [PATCH v3 1/2] pinctrl: add MVF600 pinctrl driver   Linus Walleij
• [PATCH v3 2/2] pinctrl: imx: add MVF600 support to imx pinctrl framework   Jingchang Lu
  • [PATCH v3 2/2] pinctrl: imx: add MVF600 support to imx pinctrl framework   Shawn Guo
  • [PATCH v3 2/2] pinctrl: imx: add MVF600 support to imx pinctrl framework   Linus Walleij
• [PATCH] i.MX6: Documentation: update from fsl, card-wired to non-removable   Dirk Behme
  • [PATCH] i.MX6: Documentation: update from fsl,card-wired to non-removable   Shawn Guo
• [PATCH] ASoC: dfbmcs320: make the driver common for other BT modules   Barry Song
  • [PATCH] ASoC: dfbmcs320: make the driver common for other BT modules   Lars-Peter Clausen
    • [alsa-devel] [PATCH] ASoC: dfbmcs320: make the driver common for other BT modules   Barry Song
      • [alsa-devel] [PATCH] ASoC: dfbmcs320: make the driver common for other BT modules   Lars-Peter Clausen
      • [alsa-devel] [PATCH] ASoC: dfbmcs320: make the driver common for other BT modules   Barry Song
      • [alsa-devel] [PATCH] ASoC: dfbmcs320: make the driver common for other BT modules   Mark Brown
• [PATCH] ARM: davinci: dma: Convert to devm_* api   Lad Prabhakar
  • [PATCH] ARM: davinci: dma: Convert to devm_* api   Sergei Shtylyov
    • [PATCH] ARM: davinci: dma: Convert to devm_* api   Prabhakar Lad
• [PATCH] pinctrl: sink pinctrldev_list_mutex   Linus Walleij
  • [PATCH] pinctrl: sink pinctrldev_list_mutex   Stephen Warren
    • [PATCH] pinctrl: sink pinctrldev_list_mutex   Linus Walleij
      • [PATCH] pinctrl: sink pinctrldev_list_mutex   Stephen Warren
      • [PATCH] pinctrl: sink pinctrldev_list_mutex   Linus Walleij
      • [PATCH] pinctrl: sink pinctrldev_list_mutex   Stephen Warren
      • [PATCH] pinctrl: sink pinctrldev_list_mutex   Linus Walleij
• [PATCH 0/4] mtd: atmel_nand: enable Nand Flash Controller (NFC) support   Artem Bityutskiy
  • [PATCH 0/4] mtd: atmel_nand: enable Nand Flash Controller (NFC) support   Josh Wu
• [PATCH v2 0/6] Samsung USB PHY SoC support cleanup   Tomasz Figa
  • [PATCH v2 1/6] usb: phy: samsung: Select common driver part implicitly   Tomasz Figa
  • [PATCH v2 2/6] usb: phy: samsung: Use clk_get to get reference clock   Tomasz Figa
  • [PATCH v2 3/6] usb: phy: samsung: Consolidate reference clock rate handling   Tomasz Figa
  • [PATCH v2 4/6] usb: phy: samsung: Pass set_isolation callback through driver data   Tomasz Figa
  • [PATCH v2 5/6] usb: phy: samsung: Pass enable/disable callbacks through driver data   Tomasz Figa
  • [PATCH v2 6/6] usb: phy: samsung: Add support for USB 2.0 PHY on Exynos 4x12   Tomasz Figa
• [PATCH] ARM: imx: apf51: add nfc support   Gwenhael Goavec-Merou
  • [PATCH] ARM: imx: apf51: add nfc support   Shawn Guo
• [PATCH] ARM: remove the .vm_mm value from gate_vma.   Steve Capper
  • [PATCH] ARM: remove the .vm_mm value from gate_vma.   Russell King - ARM Linux
    • [PATCH] ARM: remove the .vm_mm value from gate_vma.   Steve Capper
  • [PATCH] ARM: remove the .vm_mm value from gate_vma.   Will Deacon
• [PATCH] ARM: dove: declare all device IDs for module loading   Jean-Francois Moine
  • [PATCH] ARM: dove: declare all device IDs for module loading   Jason Cooper
• [PATCH] ARM: ux500: Only configure wake-up reasons on ux500 based platforms   Lee Jones
  • [PATCH] ARM: ux500: Only configure wake-up reasons on ux500 based platforms   Linus Walleij
    • [PATCH] ARM: ux500: Only configure wake-up reasons on ux500 based platforms   Lee Jones
• [PATCH 08/33] drivers/i2c/busses: don't check resource with devm_ioremap_resource   Wolfram Sang
  • [PATCH 08/33] drivers/i2c/busses: don't check resource with devm_ioremap_resource   Barry Song
  • [PATCH 08/33] drivers/i2c/busses: don't check resource with devm_ioremap_resource   Kukjin Kim
• [PATCH 15/33] drivers/pwm: don't check resource with devm_ioremap_resource   Wolfram Sang
• [PATCH 16/33] drivers/rtc: don't check resource with devm_ioremap_resource   Wolfram Sang
• [PATCH 29/33] arch/arm/mach-tegra: don't check resource with devm_ioremap_resource   Wolfram Sang
• [PATCH 30/33] arch/arm/plat-samsung: don't check resource with devm_ioremap_resource   Wolfram Sang
  • [PATCH 30/33] arch/arm/plat-samsung: don't check resource with devm_ioremap_resource   Kukjin Kim
    • [PATCH 30/33] arch/arm/plat-samsung: don't check resource with devm_ioremap_resource   Wolfram Sang
      • [PATCH 30/33] arch/arm/plat-samsung: don't check resource with devm_ioremap_resource   Kukjin Kim
• [PATCH 0/6] crypto: ux500/[cryp|hash] - Enable Device Tree   Lee Jones
  • [PATCH 1/6] ARM: ux500: Add Device Tree nodes for the ux500 Crypt device   Lee Jones
  • [PATCH 2/6] ARM: ux500: Add Device Tree nodes for the ux500 Hash device   Lee Jones
  • [PATCH 3/6] ARM: ux500: Provide an AUXDATA entry for ux500-cyrpt   Lee Jones
  • [PATCH 4/6] ARM: ux500: Provide an AUXDATA entry for ux500-hash   Lee Jones
  • [PATCH 5/6] crypto: ux500/cryp - Enable DT probing of the driver   Lee Jones
    • [PATCH 5/6] crypto: ux500/cryp - Enable DT probing of the driver   Linus Walleij
      • [PATCH 5/6] crypto: ux500/cryp - Enable DT probing of the driver   Herbert Xu
      • [PATCH 5/6] crypto: ux500/cryp - Enable DT probing of the driver   Lee Jones
      • [PATCH 5/6] crypto: ux500/cryp - Enable DT probing of the driver   Linus Walleij
    • [PATCH 5/6] crypto: ux500/cryp - Enable DT probing of the driver   Linus Walleij
  • [PATCH 6/6] crypto: ux500/hash - Enable DT probing of the driver   Lee Jones
  • [PATCH 0/6] crypto: ux500/[cryp|hash] - Enable Device Tree   Linus Walleij
• [PATCH] ARM: dove: add a kms/drm driver   Jean-Francois Moine
  • [PATCH] ARM: dove: add a kms/drm driver   Russell King - ARM Linux
  • [PATCH] ARM: dove: add a kms/drm driver   Jason Cooper
• [PATCH] ARM: omap2: remove CONFIG_ARCH_OMAP2PLUS_TYPICAL   Rob Herring
  • [PATCH] ARM: omap2: remove CONFIG_ARCH_OMAP2PLUS_TYPICAL   Tony Lindgren
    • [PATCH] ARM: omap2: remove CONFIG_ARCH_OMAP2PLUS_TYPICAL   Rob Herring
      • [PATCH] ARM: omap2: remove CONFIG_ARCH_OMAP2PLUS_TYPICAL   Tony Lindgren
• [PATCH] can: flexcan: allow compilation on arm and powerpc   Marc Kleine-Budde
  • [PATCH] can: flexcan: allow compilation on arm and powerpc   Shawn Guo
    • [PATCH] can: flexcan: allow compilation on arm and powerpc   Marc Kleine-Budde
• [GIT PULL] OMAP PM cleanups for v3.10   Kevin Hilman
  • [GIT PULL] OMAP PM cleanups for v3.10   Tony Lindgren
    • [GIT PULL] OMAP PM cleanups for v3.10   Olof Johansson
• parallel-display driver for i.MX53   Rogerio Pimentel
  • parallel-display driver for i.MX53   Rogerio Pimentel
    • parallel-display driver for i.MX53   Marek Vasut
• [PATCH 1/2] ARM: dts: imx: Remove custom dma-channel bindings   Fabio Estevam
  • [PATCH 1/2] ARM: dts: imx: Remove custom dma-channel bindings   Shawn Guo
• [PATCH 2/2] ARM: dts: imx28: Adjust i2c interrupt bindings   Fabio Estevam
  • [PATCH 2/2] ARM: dts: imx28: Adjust i2c interrupt bindings   Fabio Estevam
    • [PATCH 2/2] ARM: dts: imx28: Adjust i2c interrupt bindings   Fabio Estevam
      • [PATCH 2/2] ARM: dts: imx28: Adjust i2c interrupt bindings   Alexandre Belloni
      • [PATCH 2/2] ARM: dts: imx28: Adjust i2c interrupt bindings   Fabio Estevam
      • [PATCH 2/2] ARM: dts: imx28: Adjust i2c interrupt bindings   Juergen Beisert
      • [PATCH 2/2] ARM: dts: imx28: Adjust i2c interrupt bindings   Marek Vasut
      • [PATCH 2/2] ARM: dts: imx28: Adjust i2c interrupt bindings   Juergen Beisert
      • [PATCH 2/2] ARM: dts: imx28: Adjust i2c interrupt bindings   Marek Vasut
      • [PATCH 2/2] ARM: dts: imx28: Adjust i2c interrupt bindings   Lucas Stach
      • [PATCH 2/2] ARM: dts: imx28: Adjust i2c interrupt bindings   Alexandre Belloni
      • [PATCH 2/2] ARM: dts: imx28: Adjust i2c interrupt bindings   Lucas Stach
      • [PATCH 2/2] ARM: dts: imx28: Adjust i2c interrupt bindings   Marek Vasut
      • [PATCH 2/2] ARM: dts: imx28: Adjust i2c interrupt bindings   Marek Vasut
      • [PATCH 2/2] ARM: dts: imx28: Adjust i2c interrupt bindings   Fabio Estevam
• [PATCH 0/3] ARM: kernel: cpu_logical_map misc fixes   Lorenzo Pieralisi
• [PATCH 1/3] ARM: DT: kernel: move temporary cpu map stack array to static data   Lorenzo Pieralisi
• [PATCH 2/3] ARM: kernel: fix arm_dt_init_cpu_maps() to skip non-cpu nodes   Lorenzo Pieralisi
• [PATCH v2] clk: si5351: declare all device IDs for module loading   Jean-Francois Moine
  • [PATCH v2] clk: si5351: declare all device IDs for module loading   Mike Turquette
• [PATCH] ARM: OMAP2+: nand: reorganize gpmc timing values   Tony Lindgren
• [PATCH] ARM: prima2: return rather than panic on missing DT nodes   Rob Herring
  • [PATCH] ARM: prima2: return rather than panic on missing DT nodes   Srinivas KANDAGATLA
    • [PATCH] ARM: prima2: return rather than panic on missing DT nodes   Rob Herring
      • [PATCH] ARM: prima2: return rather than panic on missing DT nodes   Barry Song
      • [PATCH] ARM: prima2: return rather than panic on missing DT nodes   Srinivas KANDAGATLA
      • [PATCH] ARM: prima2: return rather than panic on missing DT nodes   Barry Song
• [PATCH 3/3] ARM: kernel: fix __cpu_logical_map default initialization   Will Deacon
  • [PATCH 3/3] ARM: kernel: fix __cpu_logical_map default initialization   Lorenzo Pieralisi
  • [PATCH 3/3] ARM: kernel: fix __cpu_logical_map default initialization   Lorenzo Pieralisi
• [PATCHv10 0/9] PCIe support for the Armada 370 and Armada XP SoCs   Thomas Petazzoni
  • [PATCHv10 3/9] of/pci: Add of_pci_get_devfn() function   Thomas Petazzoni
  • [PATCHv10 4/9] of/pci: Add of_pci_parse_bus_range() function   Thomas Petazzoni
  • [PATCHv10 5/9] clk: mvebu: create parent-child relation for PCIe clocks on Armada 370   Thomas Petazzoni
    • [PATCHv10 5/9] clk: mvebu: create parent-child relation for PCIe clocks on Armada 370   Jason Cooper
      • [PATCHv10 5/9] clk: mvebu: create parent-child relation for PCIe clocks on Armada 370   Jason Cooper
  • [PATCHv10 6/9] clk: mvebu: add more PCIe clocks for Armada XP   Thomas Petazzoni
  • [PATCHv10 7/9] pci: PCIe driver for Marvell Armada 370/XP systems   Thomas Petazzoni
  • [PATCHv10 8/9] arm: mvebu: PCIe support is now available on mvebu   Thomas Petazzoni
  • [PATCHv10 9/9] arm: mvebu: update defconfig with PCI and USB support   Thomas Petazzoni
    • [PATCHv10 9/9] arm: mvebu: update defconfig with PCI and USB support   Jason Cooper
• [PATCHv10 1/9] arm: mvebu: fix the 'ranges' property to handle PCIe   Thomas Petazzoni
  • [PATCHv10 1/9] arm: mvebu: fix the 'ranges' property to handle PCIe   Jason Cooper
• [PATCHv10 2/9] of/pci: Provide support for parsing PCI DT ranges property   Thomas Petazzoni
  • [PATCHv10 2/9] of/pci: Provide support for parsing PCI DT ranges property   Jason Cooper
    • [PATCHv10 2/9] of/pci: Provide support for parsing PCI DT ranges property   Linus Walleij
      • [PATCHv10 2/9] of/pci: Provide support for parsing PCI DT ranges property   Jason Cooper
• [PATCH] arm: mvebu: enable the third USB interface on OpenBlocks AX3   Thomas Petazzoni
  • [PATCH] arm: mvebu: enable the third USB interface on OpenBlocks AX3   yamagata at plathome.co.jp
    • [PATCH] arm: mvebu: enable the third USB interface on OpenBlocks AX3   Gregory CLEMENT
      • [PATCH] arm: mvebu: enable the third USB interface on OpenBlocks AX3   Willy Tarreau
    • [PATCH] arm: mvebu: enable the third USB interface on OpenBlocks AX3   Jason Cooper
      • [PATCH] arm: mvebu: enable the third USB interface on OpenBlocks AX3   Willy Tarreau
      • [PATCH] arm: mvebu: enable the third USB interface on OpenBlocks AX3   Jason Cooper
      • [PATCH] arm: mvebu: enable the third USB interface on OpenBlocks AX3   yamagata at plathome.co.jp
      • [PATCH] arm: mvebu: enable the third USB interface on OpenBlocks AX3   Jason Cooper
  • [PATCH] arm: mvebu: enable the third USB interface on OpenBlocks AX3   Jason Cooper
• [PATCH -v11 resend 00/11] Shutdown from reboot_cpuid without stopping other cpus.   Robin Holt
  • [PATCH -v11 resend 02/11] Migrate shutdown/reboot to boot cpu.   Robin Holt
  • [PATCH -v11 resend 04/11] Move shutdown/reboot related functions to kernel/reboot.c   Robin Holt
  • [PATCH -v11 resend 06/11] x86, prepare reboot_mode for moving to generic kernel code.   Robin Holt
  • [PATCH -v11 resend 07/11] unicore32, prepare reboot_mode for moving to generic kernel code.   Robin Holt
  • [PATCH -v11 resend 08/11] arm, Remove unused restart_mode fields from some arm subarchs   Robin Holt
  • [PATCH -v11 resend 09/11] arm, prepare reboot_mode for moving to generic kernel code.   Robin Holt
  • [PATCH -v11 resend 10/11] arm, change reboot_mode to use enum reboot_mode   Robin Holt
  • [PATCH -v11 resend 11/11] Move arch/x86 reboot= handling to generic kernel.   Robin Holt
• [PATCH -v11 resend 01/11] CPU hotplug: Provide a generic helper to disable/enable CPU hotplug   Robin Holt
• [PATCH -v11 resend 03/11] Remove -stable friendly PF_THREAD_BOUND define   Robin Holt
• [PATCH -v11 resend 05/11] checkpatch.pl the new kernel/reboot.c file.   Robin Holt
• [PATCH] ARM: dts: OMAP2+: Simplify NAND support   Tony Lindgren
• [RFC] ARM: Allow user selection HZ values   Russell King - ARM Linux
• [PATCHv2 1/6] ARM: socfpga: dts: Add ethernet bindings for SOCFPGA   dinguyen at altera.com
  • [PATCHv2 6/6] mmc: dw_mmc: Add support DW SD/MMC driver on SOCFPGA   dinguyen at altera.com
    • [PATCHv2 6/6] mmc: dw_mmc: Add support DW SD/MMC driver on SOCFPGA   Pavel Machek
      • [PATCHv2 6/6] mmc: dw_mmc: Add support DW SD/MMC driver on SOCFPGA   Dinh Nguyen
    • [PATCHv2 6/6] mmc: dw_mmc: Add support DW SD/MMC driver on SOCFPGA   Seungwon Jeon
      • [PATCHv2 6/6] mmc: dw_mmc: Add support DW SD/MMC driver on SOCFPGA   Dinh Nguyen
• [PATCHv2 2/6] ARM: socfpga: dts: Add gate-clock bindings   dinguyen at altera.com
• [PATCHv2 3/6] ARM: socfpga: Add support to gate peripheral clocks   dinguyen at altera.com
  • [PATCHv2 3/6] ARM: socfpga: Add support to gate peripheral clocks   Pavel Machek
    • [PATCHv2 3/6] ARM: socfpga: Add support to gate peripheral clocks   Dinh Nguyen
• [PATCHv2 4/6] ARM: socfpga: Add syscon to be part of socfpga   dinguyen at altera.com
• [PATCHv2 5/6] ARM: socfpga: dts: Add support for SD/MMC   dinguyen at altera.com
• [RFC 0/8] rmk's Dove DRM/TDA19988 Cubox driver   Russell King - ARM Linux
  • [RFC 1/8] DRM: Add Dove DRM driver   Russell King
  • [RFC 2/8] drm/i2c: nxp-tda998x: fix EDID reading on TDA19988 devices   Russell King
  • [RFC 3/8] drm/i2c: nxp-tda998x: ensure VIP output mux is properly set   Russell King
    • [RFC 3/8] drm/i2c: nxp-tda998x: ensure VIP output mux is properly set   Jean-Francois Moine
      • [RFC 3/8] drm/i2c: nxp-tda998x: ensure VIP output mux is properly set   Russell King - ARM Linux
  • [RFC 4/8] drm/i2c: nxp-tda998x: fix npix/nline programming   Russell King
  • [RFC 5/8] drm/i2c: nxp-tda998x: prepare for video input configuration   Russell King
  • [RFC 6/8] drm/i2c: nxp-tda998x: add video and audio input configuration   Russell King
    • [RFC 6/8] drm/i2c: nxp-tda998x: add video and audio input configuration   Rob Clark
  • [RFC 7/8] DRM: Dove: add support for drm tda19988 driver   Russell King
  • [RFC 8/8] DRM: dove: provide a couple of generic slave encoder helpers   Russell King
  • [RFC 0/8] rmk's Dove DRM/TDA19988 Cubox driver   Jean-Francois Moine
    • [RFC 0/8] rmk's Dove DRM/TDA19988 Cubox driver   Sebastian Hesselbarth
    • [RFC 0/8] rmk's Dove DRM/TDA19988 Cubox driver   Russell King - ARM Linux
      • [RFC 0/8] rmk's Dove DRM/TDA19988 Cubox driver   Jean-Francois Moine
      • [RFC 0/8] rmk's Dove DRM/TDA19988 Cubox driver   Russell King - ARM Linux
      • [RFC 0/8] rmk's Dove DRM/TDA19988 Cubox driver   Russell King - ARM Linux
      • [RFC 0/8] rmk's Dove DRM/TDA19988 Cubox driver   Jean-Francois Moine
      • [RFC 0/8] rmk's Dove DRM/TDA19988 Cubox driver   Russell King - ARM Linux
      • [RFC 0/8] rmk's Dove DRM/TDA19988 Cubox driver   Alex Deucher
      • [RFC 0/8] rmk's Dove DRM/TDA19988 Cubox driver   Russell King - ARM Linux
      • [RFC 0/8] rmk's Dove DRM/TDA19988 Cubox driver   Alex Deucher
      • [RFC 0/8] rmk's Dove DRM/TDA19988 Cubox driver   Jean-Francois Moine
    • [RFC 0/8] rmk's Dove DRM/TDA19988 Cubox driver   Russell King - ARM Linux
  • [RFC 2/4] ARM: dove: add video card node for SolidRun CuBox   Jean-Francois Moine
    • [RFC 2/4] ARM: dove: add video card node for SolidRun CuBox   Sebastian Hesselbarth
  • [RFC 3/4] DRM: add OF support for Dove DRM driver   Jean-Francois Moine
    • [RFC 3/4] DRM: add OF support for Dove DRM driver   Sebastian Hesselbarth
      • [RFC 3/4] DRM: add OF support for Dove DRM driver   Jean-Francois Moine
      • [RFC 3/4] DRM: add OF support for Dove DRM driver   Russell King - ARM Linux
    • [RFC 3/4] DRM: add OF support for Dove DRM driver   Russell King - ARM Linux
  • [RFC 4/4] DRM: tda998x: add missing include   Jean-Francois Moine
    • [RFC 4/4] DRM: tda998x: add missing include   Sebastian Hesselbarth
    • [RFC 4/4] DRM: tda998x: add missing include   Rob Clark
      • [RFC 4/4] DRM: tda998x: add missing include   Jean-Francois Moine
      • [RFC 4/4] DRM: tda998x: add missing include   Rob Clark
      • [RFC 4/4] DRM: tda998x: add missing include   Sebastian Hesselbarth
      • [RFC 4/4] DRM: tda998x: add missing include   Russell King - ARM Linux
      • [RFC 4/4] DRM: tda998x: add missing include   Sebastian Hesselbarth
      • [RFC 4/4] DRM: tda998x: add missing include   Jean-Francois Moine
      • [RFC 4/4] DRM: tda998x: add missing include   Sebastian Hesselbarth
      • [RFC 4/4] DRM: tda998x: add missing include   Jean-Francois Moine
• [PATCH 0/9] Fix Marvell mv63xxx I2C driver   Russell King - ARM Linux
  • [PATCH 1/9] I2C: mv64xxx: work around signals causing I2C transactions to be aborted   Russell King
    • [PATCH 1/9] I2C: mv64xxx: work around signals causing I2C transactions to be aborted   Jean-Francois Moine
      • [PATCH 1/9] I2C: mv64xxx: work around signals causing I2C transactions to be aborted   Russell King - ARM Linux
    • [PATCH 1/9] I2C: mv64xxx: work around signals causing I2C transactions to be aborted   Wolfram Sang
    • [PATCH 1/9] I2C: mv64xxx: work around signals causing I2C transactions to be aborted   Mark A. Greer
  • [PATCH 2/9] I2C: mv64xxx: use return value from mv64xxx_i2c_map_regs()   Russell King
  • [PATCH 3/9] I2C: mv64xxx: use devm_ioremap_resource()   Russell King
    • [PATCH 3/9] I2C: mv64xxx: use devm_ioremap_resource()   Jean-Francois Moine
      • [PATCH 3/9] I2C: mv64xxx: use devm_ioremap_resource()   Russell King - ARM Linux
  • [PATCH 4/9] I2C: mv64xxx: use devm_clk_get() to avoid missing clk_put()   Russell King
  • [PATCH 5/9] I2C: mv64xxx: use devm_kzalloc()   Russell King
  • [PATCH 6/9] I2C: mv64xxx: fix error handling for request_irq()   Russell King
  • [PATCH 7/9] I2C: mv64xxx: remove I2C_M_NOSTART code   Russell King
    • [PATCH 7/9] I2C: mv64xxx: remove I2C_M_NOSTART code   Mark Brown
  • [PATCH 8/9] I2C: mv64xxx: move mv64xxx_i2c_prepare_for_io()   Russell King
  • [PATCH 9/9] I2C: mv64xxx: fix race between FSM/interrupt and process context   Russell King
    • [PATCH 9/9] I2C: mv64xxx: fix race between FSM/interrupt and process context   Wolfram Sang
      • [PATCH 9/9] I2C: mv64xxx: fix race between FSM/interrupt and process context   Russell King - ARM Linux
      • [PATCH 9/9] I2C: mv64xxx: fix race between FSM/interrupt and process context   Wolfram Sang
• [PATCH v4 0/3] R8A7778/BOCK-W R-Car VIN driver support   Sergei Shtylyov
  • [PATCH v4 1/3] ARM: shmobile: r8a7778: add VIN support   Sergei Shtylyov
  • [PATCH v4 2/3] ARM: shmobile: BOCK-W: add VIN and ML86V7667 support   Sergei Shtylyov
  • [PATCH v4 3/3] ARM: shmobile: BOCK-W: enable VIN and ML86V7667 in defconfig   Sergei Shtylyov
• [PATCH v2] ARM: shmobile: BOCK-W: add Ether support   Sergei Shtylyov
  • [PATCH v2] ARM: shmobile: BOCK-W: add Ether support   Simon Horman
    • [PATCH v2] ARM: shmobile: BOCK-W: add Ether support   Sergei Shtylyov
      • [PATCH v2] ARM: shmobile: BOCK-W: add Ether support   Simon Horman
      • [PATCH v2] ARM: shmobile: BOCK-W: add Ether support   Sergei Shtylyov
      • [PATCH v2] ARM: shmobile: BOCK-W: add Ether support   Simon Horman
• [Bug] ARM 'perf' regression by commit a43cb95d5   Ming Lei
  • [Bug] ARM 'perf' regression by commit a43cb95d5   Ming Lei
  • [Bug] ARM 'perf' regression by commit a43cb95d5   Will Deacon
    • [Bug] ARM 'perf' regression by commit a43cb95d5   Ming Lei
      • [Bug] ARM 'perf' regression by commit a43cb95d5   Will Deacon
      • [Bug] ARM 'perf' regression by commit a43cb95d5   Ming Lei
      • [Bug] ARM 'perf' regression by commit a43cb95d5   Will Deacon
      • [Bug] ARM 'perf' regression by commit a43cb95d5   Ming Lei
      • [Bug] ARM 'perf' regression by commit a43cb95d5   Will Deacon
      • [Bug] ARM 'perf' regression by commit a43cb95d5   Ming Lei
• [PATCH v2] ASoC: dfbmcs320: make the driver common for other BT modules   Barry Song
  • [PATCH v2] ASoC: dfbmcs320: make the driver common for other BT modules   Mark Brown
    • [alsa-devel] [PATCH v2] ASoC: dfbmcs320: make the driver common for other BT modules   Barry Song
      • [alsa-devel] [PATCH v2] ASoC: dfbmcs320: make the driver common for other BT modules   Mark Brown
      • [alsa-devel] [PATCH v2] ASoC: dfbmcs320: make the driver common for other BT modules   Lars-Peter Clausen
      • [alsa-devel] [PATCH v2] ASoC: dfbmcs320: make the driver common for other BT modules   Barry Song
• [PATCH] ARM: bcm2835: enable CONFIG_LEDS_GPIO   Stephen Warren
  • [PATCH] ARM: bcm2835: enable CONFIG_LEDS_GPIO   Stephen Warren
• [PATCH] ARM: dts: apf28dev: Add touchscreen support for APF28dev   Gwenhael Goavec-Merou
  • [PATCH] ARM: imx: apf51: add nfc support   Gwenhael Goavec-Merou
    • [PATCH] ARM: imx: apf51: add nfc support   Shawn Guo
      • [PATCH] ARM: imx: apf51: add nfc support   gwenhael.goavec
  • [PATCH] ARM: dts: apf28dev: Add touchscreen support for APF28dev   Shawn Guo
• [PATCH] drm/i2c: nxp-tda998x: fix abort of some i2c exchanges   Jean-Francois Moine
  • [PATCH] drm/i2c: nxp-tda998x: fix abort of some i2c exchanges   Russell King - ARM Linux
• [PATCH] ARM: vt8500: Add missing NULL terminator in dt_compat   Srinivas KANDAGATLA
  • [PATCH] ARM: vt8500: Add missing NULL terminator in dt_compat   Tony Prisk
    • [PATCH] ARM: vt8500: Add missing NULL terminator in dt_compat   Olof Johansson
• [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10   Santosh Shilimkar
  • [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10   Tony Lindgren
    • [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10   Santosh Shilimkar
• [PATCH] ARM: imx23-olinuxino: Add i2c support   Shawn Guo
• [PATCH] ARM: etm: add missing misc_deregister() on probe error and remove   Wei Yongjun
• [PATCH 0/2] remove MLB PLL clock device   Jiada Wang
• [PATCH 1/2] ARM: imx: disable pll8_mlb in mx6q_clks   Jiada Wang
  • [PATCH 1/2] ARM: imx: disable pll8_mlb in mx6q_clks   Shawn Guo
• [PATCH 2/2] ARM: imx: remove MLB PLL from pllv3   Jiada Wang
• [PATCH v2] can: flexcan: remove HAVE_CAN_FLEXCAN Kconfig symbol   Marc Kleine-Budde
  • [PATCH v2] can: flexcan: remove HAVE_CAN_FLEXCAN Kconfig symbol   Shawn Guo
    • [PATCH v2] can: flexcan: remove HAVE_CAN_FLEXCAN Kconfig symbol   Marc Kleine-Budde
      • [PATCH v2] can: flexcan: remove HAVE_CAN_FLEXCAN Kconfig symbol   Benjamin Herrenschmidt
• [PATCH] ARM: imx6q: clk: add the eim_slow clock   Huang Shijie
  • [PATCH] ARM: imx6q: clk: add the eim_slow clock   Shawn Guo
• [PATCH 0/3] staging: fix parallel display regressions   Markus Niebel
  • [PATCH 2/3] staging: drm/imx: fix spelling error for vsync flag config   Markus Niebel
    • [PATCH 2/3] staging: drm/imx: fix spelling error for vsync flag config   Philipp Zabel
  • [PATCH 3/3] staging: drm/imx: revert vsync_cnt for di->id 1   Markus Niebel
    • [PATCH 3/3] staging: drm/imx: revert vsync_cnt for di->id 1   Philipp Zabel
  • [PATCH 0/3] staging: fix parallel display regressions   Philipp Zabel
    • [PATCH 0/3] staging: fix parallel display regressions   Rogerio Pimentel
  • [PATCH 0/3] staging: fix parallel display regressions   Fabio Estevam
• [PATCH 1/3] staging: drm/imx: set correct sync pins for parallel display   Markus Niebel
  • [PATCH 1/3] staging: drm/imx: set correct sync pins for parallel display   Philipp Zabel
• 3.9 regression : CAM_XCLKA wrong frequency setting.   jean-philippe francois
  • 3.9 regression : CAM_XCLKA wrong frequency setting.   jean-philippe francois
    • [PATCH] ARM : omap3 : fix wrong container_of in clock36xx.c   Jean-Philippe Francois
      • [PATCH] ARM : omap3 : fix wrong container_of in clock36xx.c   Mike Turquette
• [PATCH v2 0/4] mtd: atmel_nand: enable Nand Flash Controller (NFC) support   Josh Wu
  • [PATCH v2 1/4] mtd: atmel_nand: replace pmecc enable code with one function.   Josh Wu
  • [PATCH v2 2/4] mtd: atmel_nand: add Nand Flash Controller (NFC) support   Josh Wu
    • [PATCH v2 2/4] mtd: atmel_nand: add Nand Flash Controller (NFC) support   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH v2 2/4] mtd: atmel_nand: add Nand Flash Controller (NFC) support   Josh Wu
      • [PATCH v2 2/4] mtd: atmel_nand: add Nand Flash Controller (NFC) support   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH v2 2/4] mtd: atmel_nand: add Nand Flash Controller (NFC) support   Josh Wu
      • [PATCH v2 2/4] mtd: atmel_nand: add Nand Flash Controller (NFC) support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH v2 3/4] mtd: atmel_nand: enable Nand Flash Controller (NFC) read data via sram   Josh Wu
  • [PATCH v2 4/4] mtd: atmel_nand: enable Nand Flash Controller (NFC) write via sram   Josh Wu
    • [PATCH v2 4/4] mtd: atmel_nand: enable Nand Flash Controller (NFC) write via sram   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH v2 4/4] mtd: atmel_nand: enable Nand Flash Controller (NFC) write via sram   Josh Wu
  • [PATCH v2 0/4] mtd: atmel_nand: enable Nand Flash Controller (NFC) support   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH v2 0/4] mtd: atmel_nand: enable Nand Flash Controller (NFC) support   Josh Wu
• ARM Cortex-A7 support in Linux   Sharma Bhupesh-B45370
  • ARM Cortex-A7 support in Linux   Marc Zyngier
    • ARM Cortex-A7 support in Linux   Russell King - ARM Linux
      • ARM Cortex-A7 support in Linux   Will Deacon
      • ARM Cortex-A7 support in Linux   Marc Zyngier
      • ARM Cortex-A7 support in Linux   Will Deacon
      • ARM Cortex-A7 support in Linux   Marc Zyngier
• [PATCH-V2] ARM: OMAP3+: am33xx id: Add new am33xx specific function to check dev_feature   Vaibhav Hiremath
• [PATCH-V2] ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock   Hiremath, Vaibhav
  • [PATCH-V2] ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock   Tony Lindgren
    • [PATCH-V2] ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock   Hiremath, Vaibhav
• [PATCH 1/2] ARM: mvebu: Fix ranges entry on XP GP board   Ezequiel Garcia
  • [PATCH 2/2] ARM: mvebu: Add support for NOR flash device on Armada XP-DB board   Ezequiel Garcia
    • [PATCH 2/2] ARM: mvebu: Add support for NOR flash device on Armada XP-DB board   Jason Cooper
      • [PATCH 2/2] ARM: mvebu: Add support for NOR flash device on Armada XP-DB board   Thomas Petazzoni
      • [PATCH 2/2] ARM: mvebu: Add support for NOR flash device on Armada XP-DB board   Jason Cooper
      • [PATCH 2/2] ARM: mvebu: Add support for NOR flash device on Armada XP-DB board   Thomas Petazzoni
      • [PATCH 2/2] ARM: mvebu: Add support for NOR flash device on Armada XP-DB board   Jason Cooper
  • [PATCH 1/2] ARM: mvebu: Fix ranges entry on XP GP board   Jason Cooper
• [PATCH] [for 3.10-rc] ARM: mvebu: select ARCH_REQUIRE_GPIOLIB for mvebu platform   Gregory CLEMENT
  • [PATCH] ARM: mvebu: select ARCH_REQUIRE_GPIOLIB for mvebu platform   Gregory CLEMENT
    • [PATCH] ARM: mvebu: select ARCH_REQUIRE_GPIOLIB for mvebu platform   Jason Cooper
• [PATCH] broken musb on am35xx   yegorslists at googlemail.com
• [PATCH] usb: musb: fix clock naming   yegorslists at googlemail.com
• [PATCH 05/11] ARM: shmobile: APE6EVM LAN9220 support   Guennadi Liakhovetski
  • [PATCH 05/11] ARM: shmobile: APE6EVM LAN9220 support   Simon Horman
    • [PATCH 05/11] ARM: shmobile: APE6EVM LAN9220 support   Guennadi Liakhovetski
      • [PATCH 05/11] ARM: shmobile: APE6EVM LAN9220 support   Simon Horman
      • [PATCH 05/11] ARM: shmobile: APE6EVM LAN9220 support   Olof Johansson
      • [PATCH 05/11] ARM: shmobile: APE6EVM LAN9220 support   Guennadi Liakhovetski
      • [PATCH 05/11] ARM: shmobile: APE6EVM LAN9220 support   Olof Johansson
      • [PATCH 05/11] ARM: shmobile: APE6EVM LAN9220 support   Guennadi Liakhovetski
      • [PATCH 05/11] ARM: shmobile: APE6EVM LAN9220 support   Arnd Bergmann
• [PATCH v5] ARM:dts:omap4-panda: Update the LED support for the panda DTS   Dan Murphy
  • [PATCH v5] ARM:dts:omap4-panda: Update the LED support for the panda DTS   Nishanth Menon
• [RFC PATCH 1/4] arm: omap: Add phy binding info for musb in plat data   Kishon Vijay Abraham I
  • [RFC PATCH 2/4] usb: phy: add a new API to get PHY ref by label   Kishon Vijay Abraham I
  • [RFC PATCH 3/4] usb: musb: omap: use the new API to get PHY reference by label   Kishon Vijay Abraham I
  • [RFC PATCH 1/4] arm: omap: Add phy binding info for musb in plat data   Kishon Vijay Abraham I
• [RFC PATCH 4/4] arm: omap: remove using usb_bind_phy for binding musb and phy   Kishon Vijay Abraham I
• [GIT PULL] Nomadik clocks from device tree   Linus Walleij
  • [GIT PULL] Nomadik clocks from device tree   Linus Walleij
    • [GIT PULL] Nomadik clocks from device tree   Olof Johansson
• [PATCH 0/2] Driver for Allwinner sunxi Security ID   Oliver Schinagl
  • [PATCH 1/2] Initial support for Allwinner's Security ID fuses   Oliver Schinagl
    • [PATCH 1/2] Initial support for Allwinner's Security ID fuses   Arnd Bergmann
      • [PATCH 1/2] Initial support for Allwinner's Security ID fuses   Oliver Schinagl
    • [PATCH 1/2] Initial support for Allwinner's Security ID fuses   Maxime Ripard
      • [PATCH 1/2] Initial support for Allwinner's Security ID fuses   Oliver Schinagl
      • [PATCH 1/2] Initial support for Allwinner's Security ID fuses   Maxime Ripard
      • [PATCH 1/2] Initial support for Allwinner's Security ID fuses   Oliver Schinagl
      • [PATCH 1/2] Initial support for Allwinner's Security ID fuses   Maxime Ripard
      • [PATCH 1/2] Initial support for Allwinner's Security ID fuses   Oliver Schinagl
      • [PATCH 1/2] Initial support for Allwinner's Security ID fuses   Maxime Ripard
    • [PATCH 1/2] Initial support for Allwinner's Security ID fuses   Linus Walleij
      • [PATCH 1/2] Initial support for Allwinner's Security ID fuses   Oliver Schinagl
      • [PATCH 1/2] Initial support for Allwinner's Security ID fuses   Linus Walleij
      • [PATCH 1/2] Initial support for Allwinner's Security ID fuses   Maxime Ripard
      • [PATCH 1/2] Initial support for Allwinner's Security ID fuses   Oliver Schinagl
      • [PATCH 1/2] Initial support for Allwinner's Security ID fuses   Maxime Ripard
• [PATCH 2/2] Add sunxi-sid to dts for sun4i and sun5i   Oliver Schinagl
  • [PATCH 2/2] Add sunxi-sid to dts for sun4i and sun5i   Maxime Ripard
• [PATCH] clk: sunxi: "cpu_data" is defined in header files of some architectures   Emilio López
  • [PATCH] clk: sunxi: "cpu_data" is defined in header files of some architectures   Mike Turquette
• [PATCH 1/2] ARM i.MX53: Add SATA clock   Philipp Zabel
  • [PATCH 2/2] ARM i.MX5: Add S/PDIF clocks   Philipp Zabel
    • [PATCH 2/2] ARM i.MX5: Add S/PDIF clocks   Fabio Estevam
      • [PATCH 2/2] ARM i.MX5: Add S/PDIF clocks   Philipp Zabel
  • [PATCH 1/2] ARM i.MX53: Add SATA clock   Shawn Guo
• [GIT PULL] at91: cleanup (pinctrl macros, defconfigs) for 3.11 #1   Nicolas Ferre
  • [GIT PULL] at91: cleanup (pinctrl macros, defconfigs) for 3.11 #1   Nicolas Ferre
    • [GIT PULL] at91: cleanup (pinctrl macros, defconfigs) for 3.11 #1   Olof Johansson
      • [GIT PULL] at91: cleanup (pinctrl macros, defconfigs) for 3.11 #1   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/5 v3] ARM: at91: dt: add USBA support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/5] usb: add Atmel USBA UDC DT support   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 1/5] usb: add Atmel USBA UDC DT support   Bo Shen
      • [PATCH 1/5] usb: add Atmel USBA UDC DT support   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/5] usb: add Atmel USBA UDC DT support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/5] ARM: at91: sam9x5 add udc DT support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 3/5] ARM: at91: sam9x5ek add udc DT support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 4/5] ARM: at91: sam9g45 add udc DT support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 5/5] ARM: at91: sam9m10g45ek add udc DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PULL] add support for ARM-v7M   Uwe Kleine-König
• [RFC PATCH v4 00/18] ARM: DT cpu bindings updates   Lorenzo Pieralisi
  • [RFC PATCH v4 01/18] ARM: kernel: fix arm_dt_init_cpu_maps() to skip non-cpu nodes   Lorenzo Pieralisi
    • [RFC PATCH v4 01/18] ARM: kernel: fix arm_dt_init_cpu_maps() to skip non-cpu nodes   Nicolas Pitre
    • [RFC PATCH v4 01/18] ARM: kernel: fix arm_dt_init_cpu_maps() to skip non-cpu nodes   Rob Herring
      • [RFC PATCH v4 01/18] ARM: kernel: fix arm_dt_init_cpu_maps() to skip non-cpu nodes   Lorenzo Pieralisi
  • [RFC PATCH v4 02/18] ARM: kernel: fix __cpu_logical_map default initialization   Lorenzo Pieralisi
    • [RFC PATCH v4 02/18] ARM: kernel: fix __cpu_logical_map default initialization   Nicolas Pitre
  • [RFC PATCH v4 03/18] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Lorenzo Pieralisi
    • [RFC PATCH v4 03/18] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Nicolas Pitre
  • [RFC PATCH v4 04/18] ARM: dts: am33xx: cpus/cpu nodes dts updates   Lorenzo Pieralisi
  • [RFC PATCH v4 05/18] ARM: dts: armada-370-xp: cpus/cpu node dts updates   Lorenzo Pieralisi
    • [RFC PATCH v4 05/18] ARM: dts: armada-370-xp: cpus/cpu node dts updates   Gregory CLEMENT
  • [RFC PATCH v4 06/18] ARM: dts: at91: cpus/cpu node dts updates   Lorenzo Pieralisi
  • [RFC PATCH v4 07/18] ARM: dts: exynos5440: cpus/cpu nodes dts updates   Lorenzo Pieralisi
  • [RFC PATCH v4 08/18] ARM: dts: imx: cpus/cpu nodes dts updates   Lorenzo Pieralisi
  • [RFC PATCH v4 09/18] ARM: dts: lpc32xx: cpus/cpu nodes dts updates   Lorenzo Pieralisi
  • [RFC PATCH v4 10/18] ARM: dts: omap: cpus/cpu nodes dts updates   Lorenzo Pieralisi
  • [RFC PATCH v4 11/18] ARM: dts: picoxcell: cpus/cpu nodes dts updates   Lorenzo Pieralisi
  • [RFC PATCH v4 12/18] ARM: dts: prima2: cpus/cpu node dts updates   Lorenzo Pieralisi
  • [RFC PATCH v4 13/18] ARM: dts: pxa2xx: cpus/cpu nodes dts updates   Lorenzo Pieralisi
  • [RFC PATCH v4 14/18] ARM: dts: r8a7740: cpus/cpu nodes dts updates   Lorenzo Pieralisi
  • [RFC PATCH v4 15/18] ARM: dts: sh7372: cpus/cpu nodes dts updates   Lorenzo Pieralisi
  • [RFC PATCH v4 16/18] ARM: dts: spear: cpus/cpu nodes dts updates   Lorenzo Pieralisi
  • [RFC PATCH v4 17/18] ARM: dts: sunxi: cpus/cpu nodes dts updates   Lorenzo Pieralisi
  • [RFC PATCH v4 18/18] ARM: DT: kernel: DT cpus/cpu node bindings update   Lorenzo Pieralisi
    • [RFC PATCH v4 18/18] ARM: DT: kernel: DT cpus/cpu node bindings update   Nicolas Pitre
• [PATCH v7, part3 01/16] mm: change signature of free_reserved_area() to fix building warnings   Jiang Liu
• [PATCH v7, part3 03/16] mm/ARM64: kill poison_init_mem()   Jiang Liu
• [PATCH v6] ARM:dts:omap4-panda: Update the LED support for the panda DTS   Dan Murphy
  • [PATCH v6] ARM:dts:omap4-panda: Update the LED support for the panda DTS   Nishanth Menon
    • [PATCH v6] ARM:dts:omap4-panda: Update the LED support for the panda DTS   Dan Murphy
      • [PATCH v6] ARM:dts:omap4-panda: Update the LED support for the panda DTS   Dan Murphy
      • [PATCH v6] ARM:dts:omap4-panda: Update the LED support for the panda DTS   Cousson, Benoit
• [GIT PULL] ARM DT topology bindings   Lorenzo Pieralisi
• [PATCH 0/6] Fix suspend/resume issues created by pinmux on exynos, part 2   Tomasz Figa
  • [PATCH 1/6] pinctrl: exynos: Add support for set_irq_wake of wake-up EINTs   Tomasz Figa
    • [PATCH 1/6] pinctrl: exynos: Add support for set_irq_wake of wake-up EINTs   Doug Anderson
    • [PATCH 1/6] pinctrl: exynos: Add support for set_irq_wake of wake-up EINTs   Linus Walleij
  • [PATCH 3/6] ARM: SAMSUNG: pm: Adjust for pinctrl- and DT-enabled platforms   Tomasz Figa
    • [PATCH 3/6] ARM: SAMSUNG: pm: Adjust for pinctrl- and DT-enabled platforms   Doug Anderson
      • [PATCH 3/6] ARM: SAMSUNG: pm: Adjust for pinctrl- and DT-enabled platforms   Tomasz Figa
      • [PATCH 3/6] ARM: SAMSUNG: pm: Adjust for pinctrl- and DT-enabled platforms   Doug Anderson
      • [PATCH 3/6] ARM: SAMSUNG: pm: Adjust for pinctrl- and DT-enabled platforms   Tomasz Figa
      • [PATCH 3/6] ARM: SAMSUNG: pm: Adjust for pinctrl- and DT-enabled platforms   Linus Walleij
      • [PATCH 3/6] ARM: SAMSUNG: pm: Adjust for pinctrl- and DT-enabled platforms   Tomasz Figa
      • [PATCH 3/6] ARM: SAMSUNG: pm: Adjust for pinctrl- and DT-enabled platforms   Tomasz Figa
  • [PATCH 4/6] pinctrl: samsung: Add support for SoC-specific suspend/resume callbacks   Tomasz Figa
    • [PATCH 4/6] pinctrl: samsung: Add support for SoC-specific suspend/resume callbacks   Doug Anderson
      • [PATCH 4/6] pinctrl: samsung: Add support for SoC-specific suspend/resume callbacks   Tomasz Figa
    • [PATCH 4/6] pinctrl: samsung: Add support for SoC-specific suspend/resume callbacks   Linus Walleij
      • [PATCH 4/6] pinctrl: samsung: Add support for SoC-specific suspend/resume callbacks   Tomasz Figa
  • [PATCH 5/6] pinctrl: samsung: Allow per-bank SoC-specific private data   Tomasz Figa
    • [PATCH 5/6] pinctrl: samsung: Allow per-bank SoC-specific private data   Doug Anderson
    • [PATCH 5/6] pinctrl: samsung: Allow per-bank SoC-specific private data   Linus Walleij
  • [PATCH 6/6] pinctrl: exynos: Handle suspend/resume of GPIO EINT registers   Tomasz Figa
    • [PATCH 6/6] pinctrl: exynos: Handle suspend/resume of GPIO EINT registers   Doug Anderson
      • [PATCH 6/6] pinctrl: exynos: Handle suspend/resume of GPIO EINT registers   Tomasz Figa
      • [PATCH 6/6] pinctrl: exynos: Handle suspend/resume of GPIO EINT registers   Doug Anderson
      • [PATCH v2 6/6] pinctrl: exynos: Handle suspend/resume of GPIO EINT registers   Tomasz Figa
      • [PATCH v2 6/6] pinctrl: exynos: Handle suspend/resume of GPIO EINT registers   Doug Anderson
      • [PATCH v2 6/6] pinctrl: exynos: Handle suspend/resume of GPIO EINT registers   Tomasz Figa
      • [PATCH v3 6/6] pinctrl: exynos: Handle suspend/resume of GPIO EINT registers   Tomasz Figa
      • [PATCH v3 6/6] pinctrl: exynos: Handle suspend/resume of GPIO EINT registers   Doug Anderson
      • [PATCH v3 6/6] pinctrl: exynos: Handle suspend/resume of GPIO EINT registers   Linus Walleij
      • [PATCH v3 6/6] pinctrl: exynos: Handle suspend/resume of GPIO EINT registers   Tomasz Figa
  • [PATCH 0/6] Fix suspend/resume issues created by pinmux on exynos, part 2   Tushar Behera
• [PATCH 2/6] ARM: EXYNOS: Fix EINT wake-up mask configuration when pinctrl is used   Tomasz Figa
  • [PATCH 2/6] ARM: EXYNOS: Fix EINT wake-up mask configuration when pinctrl is used   Doug Anderson
    • [PATCH 2/6] ARM: EXYNOS: Fix EINT wake-up mask configuration when pinctrl is used   Tomasz Figa
  • [PATCH 2/6] ARM: EXYNOS: Fix EINT wake-up mask configuration when pinctrl is used   Linus Walleij
• [PATCH] arm64: extable: sort the exception table at build time   Will Deacon
  • [PATCH] arm64: extable: sort the exception table at build time   David Daney
    • [PATCH] arm64: extable: sort the exception table at build time   Will Deacon
  • [PATCH] arm64: extable: sort the exception table at build time   Sam Ravnborg
    • [PATCH] arm64: extable: sort the exception table at build time   Will Deacon
• [PATCH 1/2] ARM: tlb: don't perform inner-shareable invalidation for local TLB ops   Will Deacon
  • [PATCH 1/2] ARM: tlb: don't perform inner-shareable invalidation for local TLB ops   Russell King - ARM Linux
    • [PATCH 1/2] ARM: tlb: don't perform inner-shareable invalidation for local TLB ops   Will Deacon
• [PATCH 2/2] ARM: tlb: don't perform inner-shareable invalidation for local BP ops   Will Deacon
• [PATCH 00/14] Random LPAE-related patches   Will Deacon
  • [PATCH 01/14] ARM: LPAE: use signed arithmetic for mask definitions   Will Deacon
  • [PATCH 02/14] ARM: LPAE: use phys_addr_t in alloc_init_pud()   Will Deacon
  • [PATCH 03/14] ARM: LPAE: use phys_addr_t in free_memmap()   Will Deacon
  • [PATCH 04/14] ARM: LPAE: use phys_addr_t for initrd location   Will Deacon
  • [PATCH 05/14] ARM: LPAE: use phys_addr_t in switch_mm()   Will Deacon
  • [PATCH 06/14] ARM: LPAE: use 64-bit accessors for TTBR registers   Will Deacon
  • [PATCH 07/14] ARM: LPAE: factor out T1SZ and TTBR1 computations   Will Deacon
  • [PATCH 08/14] ARM: LPAE: accomodate >32-bit addresses for page table base   Will Deacon
  • [PATCH 09/14] ARM: mm: use physical addresses in highmem sanity checks   Will Deacon
  • [PATCH 10/14] ARM: fix type of PHYS_PFN_OFFSET to unsigned long   Will Deacon
  • [PATCH 12/14] ARM: mm: clean up membank size limit checks   Will Deacon
  • [PATCH 13/14] ARM: lpae: fix definition of PTE_HWTABLE_PTRS   Will Deacon
  • [PATCH 14/14] ARM: elf: add new hwcap for identifying atomic ldrd/strd instructions   Will Deacon
    • [PATCH 14/14] ARM: elf: add new hwcap for identifying atomic ldrd/strd instructions   Catalin Marinas
      • [PATCH 14/14] ARM: elf: add new hwcap for identifying atomic ldrd/strd instructions   Will Deacon
      • [PATCH 14/14] ARM: elf: add new hwcap for identifying atomic ldrd/strd instructions   Catalin Marinas
      • [PATCH 14/14] ARM: elf: add new hwcap for identifying atomic ldrd/strd instructions   Will Deacon
      • [PATCH 14/14] ARM: elf: add new hwcap for identifying atomic ldrd/strd instructions   Catalin Marinas
      • [PATCH 14/14] ARM: elf: add new hwcap for identifying atomic ldrd/strd instructions   Will Deacon
      • [PATCH 14/14] ARM: elf: add new hwcap for identifying atomic ldrd/strd instructions   Catalin Marinas
      • [PATCH 14/14] ARM: elf: add new hwcap for identifying atomic ldrd/strd instructions   Rob Herring
      • [PATCH 14/14] ARM: elf: add new hwcap for identifying atomic ldrd/strd instructions   Catalin Marinas
      • [PATCH 14/14] ARM: elf: add new hwcap for identifying atomic ldrd/strd instructions   Will Deacon
      • [PATCH 14/14] ARM: elf: add new hwcap for identifying atomic ldrd/strd instructions   Catalin Marinas
  • [PATCH 00/14] Random LPAE-related patches   Santosh Shilimkar
  • [PATCH 00/14] Random LPAE-related patches   Subash Patel
    • [PATCH 00/14] Random LPAE-related patches   Will Deacon
      • [PATCH 00/14] Random LPAE-related patches   Kukjin Kim
• [PATCH 11/14] ARM: mm: cleanup checks for membank overlap with vmalloc area   Will Deacon
• [GIT PULL] arm64 fixes for 3.10-rc2   Catalin Marinas
• [PATCH 0/6] Drop legacy booting for omap4 for v3.11, boot with device tree only   Tony Lindgren
  • [PATCH 1/6] ARM: OMAP2+: Remove board-4430sdp.c   Tony Lindgren
    • [PATCH 1/6] ARM: OMAP2+: Remove board-4430sdp.c   Russell King - ARM Linux
      • [PATCH 1/6] ARM: OMAP2+: Remove board-4430sdp.c   Tony Lindgren
  • [PATCH 2/6] ARM: OMAP2+: Remove board-omap4panda.c   Tony Lindgren
  • [PATCH 3/6] ARM: OMAP2+: Remove legacy mux data for omap4   Tony Lindgren
  • [PATCH 4/6] ARM: OMAP2+: Remove omap4 pdata from hsmmc.c   Tony Lindgren
  • [PATCH 5/6] ARM: OMAP2+: Remove omap4 pdata for USB   Tony Lindgren
  • [PATCH 6/6] ARM: OMAP2+: Remove omap4 ocp2scp pdata   Tony Lindgren
    • [PATCH 6/6] ARM: OMAP2+: Remove omap4 ocp2scp pdata   Felipe Balbi
    • [PATCH 6/6] ARM: OMAP2+: Remove omap4 ocp2scp pdata   Kishon Vijay Abraham I
• [GIT PULL] omap fixes for v3.10-rc1   Tony Lindgren
  • [GIT PULL] omap fixes for v3.10-rc1   Olof Johansson
    • [GIT PULL] omap fixes for v3.10-rc1   Tony Lindgren
• spurious bL cpufreq driver messages   Rob Herring
  • spurious bL cpufreq driver messages   Viresh Kumar
    • spurious bL cpufreq driver messages   Rob Herring
      • spurious bL cpufreq driver messages   Viresh Kumar
      • spurious bL cpufreq driver messages   Rob Herring
      • spurious bL cpufreq driver messages   Rafael J. Wysocki
      • spurious bL cpufreq driver messages   Viresh Kumar
      • spurious bL cpufreq driver messages   Rafael J. Wysocki
      • spurious bL cpufreq driver messages   Viresh Kumar
• [PATCH] ARM: OMAP2+: Fix multiple randconfig errors if no SoC is selected, take3   Tony Lindgren
  • [PATCH] ARM: OMAP2+: Fix multiple randconfig errors if no SoC is selected, take3   Tony Lindgren
• [PATCH 0/4] VT8500 clock for 3.10/3.11   Tony Prisk
  • [PATCH 2/4] clk: vt8500: Add support for clocks on the WM8850 SoCs   Tony Prisk
  • [PATCH 4/4] MAINTAINERS: vt8500: Add clk-vt8500.c to MAINTAINERS file   Tony Prisk
    • [PATCH 4/4] MAINTAINERS: vt8500: Add clk-vt8500.c to MAINTAINERS file   Tony Prisk
      • [PATCH 4/4] MAINTAINERS: vt8500: Add clk-vt8500.c to MAINTAINERS file   Mike Turquette
      • [PATCH 4/4] MAINTAINERS: vt8500: Add clk-vt8500.c to MAINTAINERS file   Tony Prisk
• [PATCH 1/4] clk: vt8500: Fix unbalanced spinlock in vt8500_dclk_set_rate()   Tony Prisk
• [PATCH 3/4] clk: vt8500: Remove unnecessary divisor adjustment in vtwm_dclk_set_rate()   Tony Prisk
• [GIT PULL] ARM: tegra: DT-related fixes needed by the USB tree   Stephen Warren
  • [GIT PULL] ARM: tegra: DT-related fixes needed by the USB tree   Stephen Warren
    • [GIT PULL] ARM: tegra: DT-related fixes needed by the USB tree   Felipe Balbi
      • [GIT PULL] ARM: tegra: DT-related fixes needed by the USB tree   Felipe Balbi
      • [GIT PULL] ARM: tegra: DT-related fixes needed by the USB tree   Stephen Warren
• [PATCH] clk: tegra: Use common of_clk_init() function   Stephen Warren
• [PATCH] ARM: tegra: add various LED triggers to defconfig   Stephen Warren
  • [PATCH] ARM: tegra: add various LED triggers to defconfig   Stephen Warren
• [PATCH 2/2] ARM: tegra: dts: dalmore: enable spi4   Stephen Warren
• [PATCH 1/2] ARM: config: tegra: enable T114 SPI   Stephen Warren
• [PATCH] ARM: tegra: Add charger subnode to tps65090 node   Stephen Warren
  • [PATCH] ARM: tegra: Add charger subnode to tps65090 node   Rhyland Klein
    • [PATCH] ARM: tegra: Add charger subnode to tps65090 node   Stephen Warren
      • [PATCH] ARM: tegra: Add charger subnode to tps65090 node   Rhyland Klein
      • [PATCH] ARM: tegra: Add charger subnode to tps65090 node   Stephen Warren
      • [PATCH] ARM: tegra: Add charger subnode to tps65090 node   Rhyland Klein
• [PATCHv7 0/3] Add support for velocity network driver on platform devices   Tony Prisk
  • [PATCHv7 1/3] net: velocity: Rename vptr->dev to vptr->netdev   Tony Prisk
  • [PATCHv7 2/3] net: velocity: Convert to generic dma functions   Tony Prisk
  • [PATCHv7 3/3] net: velocity: Add platform device support to VIA velocity driver   Tony Prisk
  • [PATCHv7 0/3] Add support for velocity network driver on platform devices   Tony Prisk
• [PATCHv8 0/3] Add support for velocity network driver on platform devices   Tony Prisk
  • [PATCHv8 1/3] net: velocity: Rename vptr->dev to vptr->netdev   Tony Prisk
  • [PATCHv8 2/3] net: velocity: Convert to generic dma functions   Tony Prisk
  • [PATCHv8 3/3] net: velocity: Add platform device support to VIA velocity driver   Tony Prisk
    • [PATCHv8 3/3] net: velocity: Add platform device support to VIA velocity driver   Francois Romieu
• [PATCH] ARM: i.MX6: clk: add different DualLite MLB clock config   Dirk Behme
  • [PATCH] ARM: i.MX6: clk: add different DualLite MLB clock config   Shawn Guo
• Would like to form a pool of Linux copyright holders for faster GPL enforcement against Anthrax Kernels   Eric Appleman
  • Would like to form a pool of Linux copyright holders for faster GPL enforcement against Anthrax Kernels   Bradley M. Kuhn
• [PATCH 0/4] FB updates for 3.11   Tony Prisk
  • [PATCH 1/4] fb: vt8500: Move register defines inside driver   Tony Prisk
  • [PATCH 2/4] fb: vt8500: Convert to use vendor register names   Tony Prisk
  • [PATCH 3/4] fb: vt8500: Require a device clock for wm8505fb driver   Tony Prisk
  • [PATCH 4/4] fb: vt8500: Add VGA output support to wm8505fb driver.   Tony Prisk
    • [PATCH 4/4] fb: vt8500: Add VGA output support to wm8505fb driver.   Alexey Charkov
      • [PATCH 4/4] fb: vt8500: Add VGA output support to wm8505fb driver.   Andy Chernyak
      • [PATCH 4/4] fb: vt8500: Add VGA output support to wm8505fb driver.   Tony Prisk
  • [PATCH 0/4] FB updates for 3.11   Tony Prisk
• [PATCH] ARM: tegra: enable host1x support by default   Alexandre Courbot
  • [PATCH] ARM: tegra: enable host1x support by default   Stephen Warren
• [PATCH v3] ASoC: dfbmcs320: make the driver common for other BT modules   Barry Song
• [PATCH RESEND] spi: sirf: fix the issue while transferring more than 256 words   Barry Song
  • [PATCH RESEND] spi: sirf: fix the issue while transferring more than 256 words   Mark Brown
• [PATCH v4] ASoC: dfbmcs320: make the driver common for other BT modules   Barry Song
  • [PATCH v4] ASoC: dfbmcs320: make the driver common for other BT modules   Mark Brown
    • [PATCH v4] ASoC: dfbmcs320: make the driver common for other BT modules   Barry Song
      • [PATCH v4] ASoC: dfbmcs320: make the driver common for other BT modules   Mark Brown
  • [PATCH v4] ASoC: dfbmcs320: make the driver common for other BT modules   Lars-Peter Clausen
• ARM: 3.10-rc1 does not boot anymore on OpenBlocks AX3   Willy Tarreau
  • ARM: 3.10-rc1 does not boot anymore on OpenBlocks AX3   Gregory CLEMENT
  • ARM: 3.10-rc1 does not boot anymore on OpenBlocks AX3   Ezequiel Garcia
    • ARM: 3.10-rc1 does not boot anymore on OpenBlocks AX3   Willy Tarreau
      • ARM: 3.10-rc1 does not boot anymore on OpenBlocks AX3   Ezequiel Garcia
      • ARM: 3.10-rc1 does not boot anymore on OpenBlocks AX3   Willy Tarreau
• [PATCH v2] ARM: sunxi: New watchdog driver for Allwinner A10/A13   Carlo Caione
  • [PATCH v2] ARM: sunxi: New watchdog driver for Allwinner A10/A13   Maxime Ripard
    • [PATCH v2] ARM: sunxi: New watchdog driver for Allwinner A10/A13   Carlo Caione
      • [PATCH v2] ARM: sunxi: New watchdog driver for Allwinner A10/A13   Maxime Ripard
• [PATCH] ARM: nomadik: add led and key for S8815   Linus Walleij
• [PATCH] ARM: s5p64x0: Use common uncompress.h part for plat-samsung   Tomasz Figa
• [PATCH 0/6] Samsung watchdog support clean-up   Tomasz Figa
  • [PATCH 1/6] watchdog: s3c2410_wdt: Use local register definitions   Tomasz Figa
  • [PATCH 2/6] ARM: SAMSUNG: uncompress: Use local definitions of watchdog registers   Tomasz Figa
    • [PATCH v2 2/6] ARM: SAMSUNG: uncompress: Use local definitions of watchdog registers   Tomasz Figa
  • [PATCH 3/6] ARM: SAMSUNG: Add watchdog reset driver   Tomasz Figa
  • [PATCH 4/6] ARM: SAMSUNG: Let platforms use the new watchdog reset driver   Tomasz Figa
  • [PATCH 5/6] ARM: SAMSUNG: Remove legacy watchdog reset code   Tomasz Figa
  • [PATCH 6/6] ARM: SAMSUNG: Remove unused plat/regs-watchdog.h header   Tomasz Figa
• [PATCH] ARM: nomadik: fix IRQ assignment for SMC ethernet   Linus Walleij
  • [PATCH] ARM: nomadik: fix IRQ assignment for SMC ethernet   Olof Johansson
• [PATCH] of: irq: Pass trigger type in IRQ resource flags   Tomasz Figa
• [PATCH] net: dm9000: Allow instantiation using device tree   Tomasz Figa
  • [PATCH] net: dm9000: Allow instantiation using device tree   Sascha Hauer
    • [PATCH] net: dm9000: Allow instantiation using device tree   Francois Romieu
    • [PATCH] net: dm9000: Allow instantiation using device tree   Tomasz Figa
      • [PATCH] net: dm9000: Allow instantiation using device tree   Sascha Hauer
      • [PATCH] net: dm9000: Allow instantiation using device tree   Tomasz Figa
• [PATCH v2] net: dm9000: Allow instantiation using device tree   Tomasz Figa
  • [PATCH v2] net: dm9000: Allow instantiation using device tree   Sylwester Nawrocki
    • [PATCH v2] net: dm9000: Allow instantiation using device tree   Tomasz Figa
      • [PATCH v2] net: dm9000: Allow instantiation using device tree   Sylwester Nawrocki
• [PATCH] ARM: plat-orion: Fix num_resources and id for ge10 and ge11   Gregory CLEMENT
  • [PATCH] ARM: plat-orion: Fix num_resources and id for ge10 and ge11   Andrew Lunn
    • [PATCH] ARM: plat-orion: Fix num_resources and id for ge10 and ge11   Jason Cooper
      • [PATCH] ARM: plat-orion: Fix num_resources and id for ge10 and ge11   Andrew Lunn
      • [PATCH] ARM: plat-orion: Fix num_resources and id for ge10 and ge11   Jason Cooper
  • [PATCH] ARM: plat-orion: Fix num_resources and id for ge10 and ge11   Russell King - ARM Linux
  • [PATCH] ARM: plat-orion: Fix num_resources and id for ge10 and ge11   Jason Cooper
• [RFC PATCH 0/5] ARM: mv78x00: First step to convert mv78x00 to Device Tree   Gregory CLEMENT
  • [RFC PATCH 2/5] ARM: mv78x00: Convert RD-78X00-mASA board to device tree   Gregory CLEMENT
    • [RFC PATCH 2/5] ARM: mv78x00: Convert RD-78X00-mASA board to device tree   Andrew Lunn
      • [RFC PATCH 2/5] ARM: mv78x00: Convert RD-78X00-mASA board to device tree   Gregory CLEMENT
      • [RFC PATCH 2/5] ARM: mv78x00: Convert RD-78X00-mASA board to device tree   Gregory CLEMENT
  • [RFC PATCH 4/5] ARM: mv78x00: Add the Device Tree support for MV78X00 family   Gregory CLEMENT
    • [RFC PATCH 4/5] ARM: mv78x00: Add the Device Tree support for MV78X00 family   Jason Cooper
      • [RFC PATCH 4/5] ARM: mv78x00: Add the Device Tree support for MV78X00 family   Sebastian Hesselbarth
      • [RFC PATCH 4/5] ARM: mv78x00: Add the Device Tree support for MV78X00 family   Jason Cooper
  • [RFC PATCH 5/5] ARM: mv78x00: Add Device Tree support for the RD-78X00-mASA board   Gregory CLEMENT
  • [RFC PATCH 0/5] ARM: mv78x00: First step to convert mv78x00 to Device Tree   Andrew Lunn
    • [RFC PATCH 0/5] ARM: mv78x00: First step to convert mv78x00 to Device Tree   Gregory CLEMENT
      • [RFC PATCH 0/5] ARM: mv78x00: First step to convert mv78x00 to Device Tree   Andrew Lunn
• [RFC PATCH 1/5] ARM: mv78x00: Add generic support for the Device Tree boards   Gregory CLEMENT
• [RFC PATCH 3/5] ARM: mv78x00: Add infrastructure to support boards converted to DT   Gregory CLEMENT
• OMAP baseline test results for v3.10-rc1   Paul Walmsley
  • OMAP baseline test results for v3.10-rc1   Paul Walmsley
    • OMAP baseline test results for v3.10-rc1   Kevin Hilman
• [GIT PULL] ARM: OMAP2+: hwmod/serial: fix DT case   Paul Walmsley
  • [GIT PULL] ARM: OMAP2+: hwmod/serial: fix DT case   Tony Lindgren
    • [GIT PULL] ARM: OMAP2+: hwmod/serial: fix DT case   Olof Johansson
• [PATCH] Change internal SRAM memory type to "MT_MEMORY_SO"   Wenyou Yang
  • [PATCH] ARM: at91: Fix: Change internal SRAM memory type to "MT_MEMORY_SO"   Wenyou Yang
    • [PATCH] ARM: at91: Fix: Change internal SRAM memory type to "MT_MEMORY_SO"   Nicolas Ferre
    • [PATCH] ARM: at91: Fix: Change internal SRAM memory type to "MT_MEMORY_SO"   Russell King - ARM Linux
      • [PATCH] ARM: at91: Fix: Change internal SRAM memory type to "MT_MEMORY_SO"   Yang, Wenyou
      • [PATCH] ARM: at91: Fix: Change internal SRAM memory type to "MT_MEMORY_SO"   Russell King - ARM Linux
      • [PATCH] ARM: at91: Fix: Change internal SRAM memory type to "MT_MEMORY_SO"   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH] ARM: at91: Fix: Change internal SRAM memory type to "MT_MEMORY_SO"   Russell King - ARM Linux
      • [PATCH] ARM: at91: Fix: Change internal SRAM memory type to "MT_MEMORY_SO"   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH] ARM: at91: Fix: Change internal SRAM memory type to "MT_MEMORY_SO"   Russell King - ARM Linux
      • [PATCH] ARM: at91: Fix: Change internal SRAM memory type to "MT_MEMORY_SO"   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH] Change internal SRAM memory type to "MT_MEMORY_SO"   Nicolas Ferre
• [PATCH] arm64: compiling issue for allmodconfig, need "asm/parport.h" by "drivers/parport/parport_pc.c"   Chen Gang
  • [PATCH] arm64: compiling issue for allmodconfig, need "asm/parport.h" by "drivers/parport/parport_pc.c"   Catalin Marinas
    • [PATCH] arm64: compiling issue for allmodconfig, need "asm/parport.h" by "drivers/parport/parport_pc.c"   Chen Gang
      • [PATCH] arm64: compiling issue for allmodconfig, need "asm/parport.h" by "drivers/parport/parport_pc.c"   Chen Gang
      • [PATCH] arm64: compiling issue for allmodconfig, need "asm/parport.h" by "drivers/parport/parport_pc.c"   Catalin Marinas
      • [PATCH] arm64: compiling issue for allmodconfig, need "asm/parport.h" by "drivers/parport/parport_pc.c"   Chen Gang
• [PATCH] arm64: kernel: need extern variable 'screen_info' for related driver using.   Chen Gang
  • [PATCH] arm64: kernel: need extern variable 'screen_info' for related driver using.   Will Deacon
    • [PATCH] arm64: kernel: need extern variable 'screen_info' for related driver using.   Chen Gang
      • [PATCH] arm64: kernel: need extern variable 'screen_info' for related driver using.   Geert Uytterhoeven
      • [PATCH] arm64: kernel: need extern variable 'screen_info' for related driver using.   Chen Gang
      • [PATCH] arm64: kernel: need extern variable 'screen_info' for related driver using.   Will Deacon
      • [PATCH] arm64: kernel: need extern variable 'screen_info' for related driver using.   Chen Gang
      • [PATCH] arm64: kernel: need extern variable 'screen_info' for related driver using.   Catalin Marinas
      • [PATCH] arm64: kernel: need extern variable 'screen_info' for related driver using.   Chen Gang
      • [PATCH] arm64: kernel: need extern variable 'screen_info' for related driver using.   Geert Uytterhoeven
      • [PATCH] arm64: kernel: need extern variable 'screen_info' for related driver using.   Chen Gang
• [RFC PATCH 0/6] ARM: cpuhotplug: move common functions to core   Sanjay Singh Rawat
  • [RFC PATCH 1/6] ARM: cpuhotplug: move common hotplug related functions to core   Sanjay Singh Rawat
  • [RFC PATCH 2/6] ARM: imx: use the core cpu hotplug functions   Sanjay Singh Rawat
    • [RFC PATCH 2/6] ARM: imx: use the core cpu hotplug functions   Russell King - ARM Linux
  • [RFC PATCH 3/6] ARM: RealView: use the core cpu hotplug functions   Sanjay Singh Rawat
  • [RFC PATCH 4/6] ARM: spear: use the core cpu hotplug functions   Sanjay Singh Rawat
    • [RFC PATCH 4/6] ARM: spear: use the core cpu hotplug functions   Viresh Kumar
  • [RFC PATCH 5/6] ARM: vexpress: use the core cpu hotplug functions   Sanjay Singh Rawat
  • [RFC PATCH 6/6] ARM: EXYNOS: use the core cpu hotplug functions   Sanjay Singh Rawat
• [PATCH] arm64: kernel: compiling issue, need 'EXPORT_SYMBOL_GPL(read_current_timer)'   Chen Gang
  • [PATCH] arm64: kernel: compiling issue, need 'EXPORT_SYMBOL_GPL(read_current_timer)'   Marc Zyngier
    • [PATCH] arm64: kernel: compiling issue, need 'EXPORT_SYMBOL_GPL(read_current_timer)'   Will Deacon
      • [PATCH] arm64: kernel: compiling issue, need 'EXPORT_SYMBOL_GPL(read_current_timer)'   Chen Gang
      • [PATCH] arm64: kernel: compiling issue, need 'EXPORT_SYMBOL_GPL(read_current_timer)'   Marc Zyngier
      • [PATCH] arm64: kernel: compiling issue, need 'EXPORT_SYMBOL_GPL(read_current_timer)'   Chen Gang
      • [PATCH] arm64: kernel: compiling issue, need 'EXPORT_SYMBOL_GPL(read_current_timer)'   Marc Zyngier
      • [PATCH] arm64: kernel: compiling issue, need 'EXPORT_SYMBOL_GPL(read_current_timer)'   Chen Gang
      • [PATCH] arm64: kernel: compiling issue, need 'EXPORT_SYMBOL_GPL(read_current_timer)'   Will Deacon
      • [PATCH] arm64: kernel: compiling issue, need 'EXPORT_SYMBOL_GPL(read_current_timer)'   Chen Gang
      • [PATCH v2] arm64: kernel: compiling issue, need delete read_current_timer().   Chen Gang
      • [PATCH v2] arm64: kernel: compiling issue, need delete read_current_timer().   Chen Gang
• [PATCH v1 0/3] Polling support for s3c64xx spi controller   Girish K S
  • [PATCH v1 1/3] spi: s3c64xx: added support for polling mode   Girish K S
  • [PATCH v1 2/3] spi: s3c64xx: Added provision for dedicated cs pin   Girish K S
  • [PATCH v1 3/3] spi: s3c64xx: Added support for exynos5440 spi   Girish K S
  • [PATCH v1 0/3] Polling support for s3c64xx spi controller   Girish KS
• [PATCH] arm64: kernel: compiling issue, need 'EXPORT_SYMBOL(clear_page)'   Chen Gang
  • [PATCH] arm64: kernel: compiling issue, need 'EXPORT_SYMBOL(clear_page)'   Chen Gang
  • [PATCH] arm64: kernel: compiling issue, need 'EXPORT_SYMBOL(clear_page)'   Chen Gang
    • [PATCH] arm64: kernel: compiling issue, need 'EXPORT_SYMBOL(clear_page)'   Chen Gang
• Если надобен добротнейший эффект   тимофей
• [PATCH] kernel/sched/core.c: need return NULL when BUG() is defined as empty.   Chen Gang
  • [PATCH] kernel/sched/core.c: need return NULL when BUG() is defined as empty.   Peter Zijlstra
    • [PATCH] kernel/sched/core.c: need return NULL when BUG() is defined as empty.   Chen Gang
    • [PATCH] kernel/sched/core.c: need return NULL when BUG() is defined as empty.   Russell King - ARM Linux
      • [PATCH] kernel/sched/core.c: need return NULL when BUG() is defined as empty.   Peter Zijlstra
      • [PATCH] kernel/sched/core.c: need return NULL when BUG() is defined as empty.   Chen Gang
• [PATCH] include/linux/posix_acl.h: need 'return NULL' when BUG(), if neither CONFIG_BUG nor HAVE_ARCH_BUG is defined.   Chen Gang
  • [PATCH] include/linux/posix_acl.h: need 'return NULL' when BUG(), if neither CONFIG_BUG nor HAVE_ARCH_BUG is defined.   Eric W. Biederman
    • [PATCH] include/linux/posix_acl.h: need 'return NULL' when BUG(), if neither CONFIG_BUG nor HAVE_ARCH_BUG is defined.   Russell King - ARM Linux
      • [PATCH] include/linux/posix_acl.h: need 'return NULL' when BUG(), if neither CONFIG_BUG nor HAVE_ARCH_BUG is defined.   Chen Gang
      • [PATCH] include/linux/posix_acl.h: need 'return NULL' when BUG(), if neither CONFIG_BUG nor HAVE_ARCH_BUG is defined.   Russell King - ARM Linux
      • [PATCH] include/linux/posix_acl.h: need 'return NULL' when BUG(), if neither CONFIG_BUG nor HAVE_ARCH_BUG is defined.   Chen Gang
• [PATCH 0/6] ARM: imx6q{dl}: add the WEIM driver   Huang Shijie
  • [PATCH 1/6] drivers: bus: add a new driver for WEIM   Huang Shijie
    • [PATCH 1/6] drivers: bus: add a new driver for WEIM   Sascha Hauer
      • [PATCH 1/6] drivers: bus: add a new driver for WEIM   Huang Shijie
    • [PATCH 1/6] drivers: bus: add a new driver for WEIM   Shawn Guo
      • [PATCH 1/6] drivers: bus: add a new driver for WEIM   Huang Shijie
      • [PATCH 1/6] drivers: bus: add a new driver for WEIM   Arnd Bergmann
      • [PATCH 1/6] drivers: bus: add a new driver for WEIM   Huang Shijie
  • [PATCH 2/6] ARM: dts: imx6q{dl}: fix the pin conflict between SPI and WEIM   Huang Shijie
    • [PATCH 2/6] ARM: dts: imx6q{dl}: fix the pin conflict between SPI and WEIM   Shawn Guo
      • [PATCH 2/6] ARM: dts: imx6q{dl}: fix the pin conflict between SPI and WEIM   Huang Shijie
  • [PATCH 3/6] ARM: dts: imx6qdl: add more information for WEIM   Huang Shijie
  • [PATCH 4/6] ARM: dts: imx6q: add pinctrl for WEIM NOR   Huang Shijie
  • [PATCH 5/6] ARM: dts: imx6ql: add a pinctrl for WEIM NOR   Huang Shijie
  • [PATCH 6/6] ARM: dts: imx6qdl: enable the WEIM NOR   Huang Shijie
• [PATCH] ARM: S5PV210: dependency issue, S5P_SLEEP is depend on ARM_CPU_SUSPEND   Chen Gang
  • [PATCH] ARM: S5PV210: dependency issue, S5P_SLEEP is depend on ARM_CPU_SUSPEND   Chen Gang
    • [PATCH] ARM: S5PV210: dependency issue, S5P_SLEEP is depend on ARM_CPU_SUSPEND   Kukjin Kim
      • [PATCH] ARM: S5PV210: dependency issue, S5P_SLEEP is depend on ARM_CPU_SUSPEND   Chen Gang
      • [PATCH v2] arch: arm: plat-samsung: dependency, S5P_SLEEP depends on ARM_CPU_SUSPEND   Chen Gang
• [PATCH V2 0/6] ARM: tegra114: add CPU hotplug support   Joseph Lo
  • [PATCH V2 1/6] ARM: tegra: add an assembly marco to check Tegra SoC ID   Joseph Lo
  • [PATCH V2 2/6] ARM: tegra: skip SCU and PL310 code when CPU is not Cortex-A9   Joseph Lo
  • [PATCH V2 3/6] ARM: tegra: make tegra_resume can work for Tegra114   Joseph Lo
    • [PATCH V2 3/6] ARM: tegra: make tegra_resume can work for Tegra114   Arnd Bergmann
      • [PATCH V2 3/6] ARM: tegra: make tegra_resume can work for Tegra114   Stephen Warren
  • [PATCH V2 4/6] ARM: tegra114: add power up sequence for warm boot CPU   Joseph Lo
  • [PATCH V2 5/6] clk: tegra114: implement wait_for_reset and disable_clock for tegra_cpu_car_ops   Joseph Lo
  • [PATCH V2 6/6] ARM: tegra114: add CPU hotplug support   Joseph Lo
  • [PATCH V2 0/6] ARM: tegra114: add CPU hotplug support   Stephen Warren
    • [PATCH V2 0/6] ARM: tegra114: add CPU hotplug support   Joseph Lo
  • [PATCH V2 0/6] ARM: tegra114: add CPU hotplug support   Stephen Warren
• mvebu: mbus device tree binding   Ezequiel Garcia
  • mvebu: mbus device tree binding   Ezequiel Garcia
    • mvebu: mbus device tree binding   Greg
  • mvebu: mbus device tree binding   Thomas Petazzoni
• [PATCH] ARM i.MX6q: fix for ldb_di_sels   Jiada Wang
  • [PATCH] ARM i.MX6q: fix for ldb_di_sels   Shawn Guo
• [PATCH-V2 0/2] ARM: OMAP AM33XX: clock data: Enable clkout2 output on SoC pad   Vaibhav Hiremath
  • [PATCH-V2 1/2] ARM: OMAP AM33XX: clock data: Enable clkout2 as part of init   Vaibhav Hiremath
  • [PATCH-V2 2/2] ARM: dts: AM33XX: Set pinmux for clkout2 pad used for clock output   Vaibhav Hiremath
• [PATCH v4 0/5] clk: implement remuxing during set_rate   James Hogan
  • [PATCH v4 1/5] clk: abstract parent cache   James Hogan
  • [PATCH v4 2/5] clk: move some parent related functions upwards   James Hogan
    • [PATCH v4 2/5] clk: move some parent related functions upwards   Stephen Boyd
  • [PATCH v4 3/5] clk: add support for clock reparent on set_rate   James Hogan
    • [PATCH v4 3/5] clk: add support for clock reparent on set_rate   Stephen Boyd
    • [PATCH v4 3/5] clk: add support for clock reparent on set_rate   Saravana Kannan
      • [PATCH v4 3/5] clk: add support for clock reparent on set_rate   James Hogan
  • [PATCH v4 4/5] clk: add CLK_SET_RATE_NO_REPARENT flag   James Hogan
    • [PATCH v4 4/5] clk: add CLK_SET_RATE_NO_REPARENT flag   Stephen Warren
    • [PATCH v4 4/5] clk: add CLK_SET_RATE_NO_REPARENT flag   Maxime Ripard
  • [PATCH v4 5/5] clk: clk-mux: implement remuxing on set_rate   James Hogan
    • [PATCH v4 5/5] clk: clk-mux: implement remuxing on set_rate   Saravana Kannan
• [PATCH-V2] ARM: OMAP2+: AM33xx: Fix missing reset status data to GFX hwmod   Vaibhav Hiremath
  • [PATCH-V2] ARM: OMAP2+: AM33xx: Fix missing reset status data to GFX hwmod   Paul Walmsley
    • [PATCH-V2] ARM: OMAP2+: AM33xx: Fix missing reset status data to GFX hwmod   Hiremath, Vaibhav
• [PATCH] ARM: imx: imx_v6_v7_defconfig: Select CONFIG_DRM_IMX_TVE   Fabio Estevam
  • [PATCH] ARM: imx: imx_v6_v7_defconfig: Select CONFIG_DRM_IMX_TVE   Shawn Guo
• [PATCH] ARM: dts: mvebu: Fix wrong the address reg value for the L2-cache node   Gregory CLEMENT
  • [PATCH] ARM: dts: mvebu: Fix wrong the address reg value for the L2-cache node   Jason Cooper
• [PATCH v2] ARM: S3C24XX: add devicetree support for smdk2416   Kukjin Kim
• [PATCH 0/7 v4] ARM: at91: dt: add USBA support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/7] USB: gadget: atmel_usba: move global struct usba_ep usba_ep to struct usba_udc   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 4/7] ARM: at91: sam9x5 add udc DT support   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 7/7] ARM: at91: sam9m10g45ek add udc DT support   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 1/7] USB: gadget: atmel_usba: move global struct usba_ep usba_ep to struct usba_udc   Bo Shen
      • [PATCH 1/7] USB: gadget: atmel_usba: move global struct usba_ep usba_ep to struct usba_udc   Nicolas Ferre
    • [PATCH 1/7] USB: gadget: atmel_usba: move global struct usba_ep usba_ep to struct usba_udc   Felipe Balbi
  • [PATCH 2/7] USB: gadget: atmel_usba: allow multi instance   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 2/7] USB: gadget: atmel_usba: allow multi instance   Felipe Balbi
  • [PATCH 3/7] USB: gadget: atmel_usba: add DT support   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 3/7] USB: gadget: atmel_usba: add DT support   Felipe Balbi
  • [PATCH 5/7] ARM: at91: sam9x5ek add udc DT support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 6/7] ARM: at91: sam9g45 add udc DT support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 0/7 v4] ARM: at91: dt: add USBA support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] USB: gadget: atmel_usba: move global struct usba_ep usba_ep to struct usba_udc   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/7] USB: gadget: atmel_usba: allow multi instance   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 3/7] USB: gadget: atmel_usba: add DT support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 4/7] ARM: at91: sam9x5 add udc DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V2 3/4] ARM: tegra: convert device tree files to use GPIO defines   Stephen Warren
  • [PATCH V2 3/4] ARM: tegra: convert device tree files to use GPIO defines   Stephen Warren
• [GIT PULL] Samsung fixes-2 for v3.10   Kukjin Kim
  • [GIT PULL] Samsung fixes-2 for v3.10   Olof Johansson
    • [GIT PULL] Samsung fixes-2 for v3.10   Kukjin Kim
• [PATCH V3 3/4] ARM: tegra: convert device tree files to use GPIO defines   Stephen Warren
• [PATCH] ARM: tegra: defconfig fixes   Stephen Warren
  • [PATCH] ARM: tegra: defconfig fixes   Olof Johansson
• [PATCH] ARM: tegra: config: enable TPS65090 charger   Stephen Warren
  • [PATCH] ARM: tegra: config: enable TPS65090 charger   Stephen Warren
• [PATCH v3] net: dm9000: Allow instantiation using device tree   Tomasz Figa
  • [PATCH v3] net: dm9000: Allow instantiation using device tree   Sylwester Nawrocki
  • [PATCH v3] net: dm9000: Allow instantiation using device tree   Sascha Hauer
  • [PATCH v3] net: dm9000: Allow instantiation using device tree   David Miller
• [GIT PULL] ARM: mvebu: fixes for v3.10 (round 2)   Jason Cooper
  • [GIT PULL] ARM: mvebu: fixes for v3.10 (round 2)   Olof Johansson
    • [GIT PULL] ARM: mvebu: fixes for v3.10 (round 2)   Jason Cooper
• [GIT PULL] ARM: mvebu: cleanup for v3.11 (round 2)   Jason Cooper
• [GIT PULL] ARM: mvebu: soc changes for v3.11 (round 1)   Jason Cooper
• [GIT PULL] ARM: mvebu: boards for v3.11 (round 1)   Jason Cooper
• [GIT PULL] ARM: mvebu: defconfig changes for v3.11 (round 2)   Jason Cooper
• [GIT PULL] ARM: mvebu: dt changes for v3.11 (round 2)   Jason Cooper
• [GIT PULL 1/2] of/pci dependency for mvebu/arm-soc   Jason Cooper
  • [GIT PULL 2/2] ARM: mvebu: pcie changes for v3.11 (round 1)   Jason Cooper
• [PATCH] arm/mach-u300/dummyspichip: Use module_spi_driver to register driver   Peter Huewe
  • [PATCH] arm/mach-u300/dummyspichip: Use module_spi_driver to register driver   Linus Walleij
• [PATCH V3 00/10] mmc_of_parse() adaptations, DT support for Sheevaplugs   Simon Baatz
  • [PATCH V3 06/10] mmc: tegra: handle mmc_of_parse() errors during probe   Simon Baatz
  • [PATCH V3 07/10] ARM: mvebu: Use standard MMC binding for all users of mvsdio   Simon Baatz
  • [PATCH V3 08/10] mmc: mvsdio: use standard MMC device-tree binding parser mmc_of_parse()   Simon Baatz
  • [PATCH V3 09/10] ARM: Kirkwood: Add dts files for Sheevaplug and eSATA Sheevaplug   Simon Baatz
    • [PATCH V3 09/10] ARM: Kirkwood: Add dts files for Sheevaplug and eSATA Sheevaplug   Andrew Lunn
  • [PATCH V3 10/10] ARM: Kirkwood: add DT support for Sheevaplug and Sheevaplug eSATA   Simon Baatz
    • [PATCH V3 10/10] ARM: Kirkwood: add DT support for Sheevaplug and Sheevaplug eSATA   Andrew Lunn
  • [PATCH V3 00/10] mmc_of_parse() adaptations, DT support for Sheevaplugs   Jason Cooper
    • [PATCH V3 00/10] mmc_of_parse() adaptations, DT support for Sheevaplugs   Simon Baatz
      • [PATCH V3 00/10] mmc_of_parse() adaptations, DT support for Sheevaplugs   Jason Cooper
• [PATCH V3 01/10] mmc: return mmc_of_parse() errors to caller   Simon Baatz
  • [PATCH V3 01/10] mmc: return mmc_of_parse() errors to caller   Ulf Hansson
• [PATCH V3 02/10] mmc: sh_mmcif: handle mmc_of_parse() errors during probe   Simon Baatz
• [PATCH V3 03/10] mmc: tmio-mmc: handle mmc_of_parse() errors during probe   Simon Baatz
• [PATCH V3 04/10] mmc: mxcmmc: handle mmc_of_parse() errors during probe   Simon Baatz
• [PATCH V3 05/10] mmc: sdhci-pxav3: handle mmc_of_parse() errors during probe   Simon Baatz
• [PATCH] ARM: dts: msm: Fix bad register addresses   Stephen Boyd
• hugetlbfs support plan for ARM   bill4carson
  • hugetlbfs support plan for ARM   Steve Capper
    • hugetlbfs support plan for ARM   Karicheri, Muralidharan
• [PATCH 1/2] ARM: imx6q: call of_clk_init() to register fixed rate clocks   Shawn Guo
  • [PATCH 2/2] ARM: imx6: use common of_clk_init() call to initialize clocks   Shawn Guo
  • [PATCH 1/2] ARM: imx6q: call of_clk_init() to register fixed rate clocks   Mike Turquette
• [PATCH 00/19] driver:usb&net: add missing platform_driver owner   Libo Chen
  • [PATCH 00/19] driver:usb&net: add missing platform_driver owner   David Miller
    • [PATCH 00/19] driver:usb&net: add missing platform_driver owner   Thomas Petazzoni
      • [PATCH 00/19] driver:usb&net: add missing platform_driver owner   David Miller
      • [PATCH 00/19] driver:usb&net: add missing platform_driver owner   Gu Zheng
      • [PATCH 00/19] driver:usb&net: add missing platform_driver owner   Libo Chen
      • [PATCH 00/19] driver:usb&net: add missing platform_driver owner   Gu Zheng
      • [PATCH 00/19] driver:usb&net: add missing platform_driver owner   Thomas Petazzoni
      • [PATCH 00/19] driver:usb&net: add missing platform_driver owner   Libo Chen
      • [PATCH 00/19] driver:usb&net: add missing platform_driver owner   Gu Zheng
  • [PATCH 00/19] driver:usb&net: add missing platform_driver owner   Greg KH
• [PATCH] Finally eradicate CONFIG_HOTPLUG   Stephen Rothwell
  • [PATCH] Finally eradicate CONFIG_HOTPLUG   Hans Verkuil
  • [PATCH] Finally eradicate CONFIG_HOTPLUG   Peter Stuge
    • [PATCH] Finally eradicate CONFIG_HOTPLUG   Stephen Rothwell
  • [PATCH] Finally eradicate CONFIG_HOTPLUG   Mauro Carvalho Chehab
• [PATCH v6 0/9] Generic PHY Framework   Kishon Vijay Abraham I
  • [PATCH v6 0/9] Generic PHY Framework   Kishon Vijay Abraham I
• [PATCH] ARM: iomux-mx51: Always define PUE for pins used as GPIO   Alexander Shiyan
  • [PATCH] ARM: iomux-mx51: Always define PUE for pins used as GPIO   Sascha Hauer
    • Re: [PATCH] ARM: iomux-mx51: Always define PUE for pins used as GPIO   Alexander Shiyan
      • [PATCH] ARM: iomux-mx51: Always define PU E for pins used as GPIO   Lothar Waßmann
      • Re[3]: [PATCH] ARM: iomux-mx51: Always define PU E for pins used as GPIO   Alexander Shiyan
      • [PATCH] ARM: iomux-mx51: Always define PU E for pins used as GPIO   Lothar Waßmann
• [v2 0/6] CLK: tegra: convert device tree files to use CLK defines   Hiroshi Doyu
  • [v2 0/6] CLK: tegra: convert device tree files to use CLK defines   Stephen Warren
    • [v2 0/6] CLK: tegra: convert device tree files to use CLK defines   Hiroshi Doyu
      • [v2 0/6] CLK: tegra: convert device tree files to use CLK defines   Hiroshi Doyu
      • [v2 0/6] CLK: tegra: convert device tree files to use CLK defines   Stephen Warren
      • [v2 0/6] CLK: tegra: convert device tree files to use CLK defines   Stephen Warren
  • [v2 2/6] ARM: tegra20: convert device tree files to use CLK defines   Stephen Warren
• [PATCH 0/3] ARM: ux500: Update defconfigs for MMC   Ulf Hansson
  • [PATCH 0/3] ARM: ux500: Update defconfigs for MMC   Linus Walleij
• [PATCH 1/3] ARM: ux500: Enable MMC_UNSAFE_RESUME   Ulf Hansson
• [PATCH 2/3] ARM: ux500: Don't use MMC_CLKGATE   Ulf Hansson
• [PATCH 3/3] ARM: ux500: Disable MMC_BLOCK_BOUNCE   Ulf Hansson
• [PATCH 1/2] ARM: shmobile: r8a7790: implement CPU clock scaling for CPUFreq   Guennadi Liakhovetski
  • [PATCH 1/2] ARM: shmobile: r8a7790: implement CPU clock scaling for CPUFreq   Simon Horman
    • [PATCH 1/2] ARM: shmobile: r8a7790: implement CPU clock scaling for CPUFreq   Simon Horman
• [PATCH] ARM: tegra: add cpu_disable for hotplug   Joseph Lo
  • [PATCH] ARM: tegra: add cpu_disable for hotplug   Stephen Warren
    • [PATCH] ARM: tegra: add cpu_disable for hotplug   Peter De Schrijver
      • [PATCH] ARM: tegra: add cpu_disable for hotplug   Stephen Warren
      • [PATCH] ARM: tegra: add cpu_disable for hotplug   Joseph Lo
• [PATCH v4] clocksource: add Vybrid Family pit timer support   Daniel Lezcano
  • [PATCH v4] clocksource: add Vybrid Family pit timer support   Jingchang Lu
  • [PATCH v4] clocksource: add Vybrid Family pit timer support   Lu Jingchang-B35083
    • [PATCH v4] clocksource: add Vybrid Family pit timer support   Daniel Lezcano
• [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Thomas Petazzoni
  • [PATCH 5/9] arm: mvebu: avoid hardcoded virtual address in coherency code   Thomas Petazzoni
  • [PATCH 6/9] arm: mvebu: move cache and mvebu-mbus initialization later   Thomas Petazzoni
    • [PATCH 6/9] arm: mvebu: move cache and mvebu-mbus initialization later   Jason Cooper
      • [PATCH 6/9] arm: mvebu: move cache and mvebu-mbus initialization later   Thomas Petazzoni
      • [PATCH 6/9] arm: mvebu: move cache and mvebu-mbus initialization later   Jason Cooper
      • [PATCH 6/9] arm: mvebu: move cache and mvebu-mbus initialization later   Thomas Petazzoni
      • [PATCH 6/9] arm: mvebu: move cache and mvebu-mbus initialization later   Jason Cooper
      • [PATCH 6/9] arm: mvebu: move cache and mvebu-mbus initialization later   Thomas Petazzoni
  • [PATCH 7/9] arm: mvebu: remove hardcoded static I/O mapping   Thomas Petazzoni
  • [PATCH 8/9] arm: mvebu: don't hardcode a physical address in headsmp.S   Thomas Petazzoni
  • [PATCH 9/9] arm: mvebu: switch internal register address at runtime if needed   Thomas Petazzoni
    • [PATCH 9/9] arm: mvebu: switch internal register address at runtime if needed   Thomas Petazzoni
      • [PATCH 9/9] arm: mvebu: switch internal register address at runtime if needed   Andrew Lunn
      • [PATCH 9/9] arm: mvebu: switch internal register address at runtime if needed   Thomas Petazzoni
      • [PATCH 9/9] arm: mvebu: switch internal register address at runtime if needed   Sebastian Hesselbarth
    • [PATCH 9/9] arm: mvebu: switch internal register address at runtime if needed   Andrew Lunn
      • [PATCH 9/9] arm: mvebu: switch internal register address at runtime if needed   Thomas Petazzoni
      • [PATCH 9/9] arm: mvebu: switch internal register address at runtime if needed   Andrew Lunn
  • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Willy Tarreau
    • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Thomas Petazzoni
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Willy Tarreau
    • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Sebastian Hesselbarth
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Greg
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Russell King - ARM Linux
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Thomas Petazzoni
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Arnd Bergmann
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Russell King - ARM Linux
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Sebastian Hesselbarth
  • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Arnd Bergmann
    • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Gregory CLEMENT
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Arnd Bergmann
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Gregory CLEMENT
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Arnd Bergmann
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Gregory CLEMENT
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Arnd Bergmann
    • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Thomas Petazzoni
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Arnd Bergmann
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Andrew Lunn
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Thomas Petazzoni
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Arnd Bergmann
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Thomas Petazzoni
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Arnd Bergmann
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Thomas Petazzoni
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Arnd Bergmann
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Thomas Petazzoni
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Willy Tarreau
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Thomas Petazzoni
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Willy Tarreau
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Thomas Petazzoni
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Willy Tarreau
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Thomas Petazzoni
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Sebastian Hesselbarth
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Jason Cooper
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Thomas Petazzoni
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Jason Cooper
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Thomas Petazzoni
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Jason Cooper
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Thomas Petazzoni
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Jason Gunthorpe
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Andrew Lunn
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Jason Gunthorpe
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Andrew Lunn
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Thomas Petazzoni
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Jason Gunthorpe
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Arnd Bergmann
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Thomas Petazzoni
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Andrew Lunn
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Russell King - ARM Linux
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Thomas Petazzoni
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Arnd Bergmann
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Thomas Petazzoni
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Russell King - ARM Linux
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Arnd Bergmann
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Russell King - ARM Linux
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Thomas Petazzoni
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Russell King - ARM Linux
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Greg
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Arnd Bergmann
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Thomas Petazzoni
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Arnd Bergmann
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Russell King - ARM Linux
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Thomas Petazzoni
      • [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP   Arnd Bergmann
• [PATCH 1/9] arm: mvebu: fix length of SATA registers area in .dtsi   Thomas Petazzoni
  • [PATCH 1/9] arm: mvebu: fix length of SATA registers area in .dtsi   Jason Cooper
• [PATCH 2/9] arm: mvebu: fix length of Ethernet registers area in .dtsi   Thomas Petazzoni
  • [PATCH 2/9] arm: mvebu: fix length of Ethernet registers area in .dtsi   Jason Cooper
• [PATCH 3/9] arm: mvebu: mark functions of armada-370-xp.c as static   Thomas Petazzoni
  • [PATCH 3/9] arm: mvebu: mark functions of armada-370-xp.c as static   Jason Cooper
• [PATCH 4/9] arm: mvebu: remove dependency of SMP init on static I/O mapping   Thomas Petazzoni
• [PATCH 3/2] ARM: shmobile: r8a7790: add a "cpufreq-cpu0" platform device   Guennadi Liakhovetski
• [RFC/PATCH v2 0/2] R-Car GPIO DT bindings   Laurent Pinchart
  • [RFC/PATCH v2 1/2] gpio-rcar: Make the platform data gpio_base field signed   Laurent Pinchart
    • [RFC/PATCH v2 1/2] gpio-rcar: Make the platform data gpio_base field signed   Simon Horman
  • [RFC/PATCH v2 2/2] gpio-rcar: Add DT support   Laurent Pinchart
    • [RFC/PATCH v2 2/2] gpio-rcar: Add DT support   Linus Walleij
      • [RFC/PATCH v2 2/2] gpio-rcar: Add DT support   Laurent Pinchart
      • [RFC/PATCH v2 2/2] gpio-rcar: Add DT support   Linus Walleij
      • [RFC/PATCH v2 2/2] gpio-rcar: Add DT support   Laurent Pinchart
  • [RFC/PATCH v2 0/2] R-Car GPIO DT bindings   Simon Horman
• [PATCH] ARM: ux500: build ccu8540 device tree blob   Linus Walleij
• [PATCH] ARM: ux500: fix typo in STUIB device tree   Linus Walleij
  • [PATCH] ARM: ux500: fix typo in STUIB device tree   Lee Jones
• [PATCH v4 00/21] SH pinctrl DT support   Laurent Pinchart
  • [PATCH v4 02/21] sh-pfc: Add DT support   Laurent Pinchart
    • [PATCH v4 02/21] sh-pfc: Add DT support   Linus Walleij
      • [PATCH v4 02/21] sh-pfc: Add DT support   Laurent Pinchart
  • [PATCH v4 03/21] ARM: shmobile: r8a73a4: Add pin control device to device tree   Laurent Pinchart
  • [PATCH v4 04/21] ARM: shmobile: r8a7740: Add pin control device to device tree   Laurent Pinchart
  • [PATCH v4 05/21] ARM: shmobile: r8a7778: Add pin control device to device tree   Laurent Pinchart
  • [PATCH v4 06/21] ARM: shmobile: r8a7778: Add GPIO controller devices to device tree   Laurent Pinchart
  • [PATCH v4 07/21] ARM: shmobile: r8a7779: Add pin control device to device tree   Laurent Pinchart
  • [PATCH v4 08/21] ARM: shmobile: r8a7779: Add GPIO controller devices to device tree   Laurent Pinchart
  • [PATCH v4 09/21] ARM: shmobile: r8a7790: Add pin control device to device tree   Laurent Pinchart
  • [PATCH v4 10/21] ARM: shmobile: r8a7790: Add GPIO controller devices to device tree   Laurent Pinchart
  • [PATCH v4 11/21] ARM: shmobile: sh7372: Add pin control device to device tree   Laurent Pinchart
  • [PATCH v4 12/21] ARM: shmobile: sh73a0: Add pin control device to device tree   Laurent Pinchart
  • [PATCH v4 13/21] ARM: shmobile: armadillo-reference: Move pinctrl mappings to device tree   Laurent Pinchart
  • [PATCH v4 14/21] ARM: shmobile: armadillo-reference: Add st1232 pin mappings   Laurent Pinchart
  • [PATCH v4 15/21] ARM: shmobile: armadillo-reference: Move st1232 reset GPIO to DT   Laurent Pinchart
    • [PATCH v4 15/21] ARM: shmobile: armadillo-reference: Move st1232 reset GPIO to DT   Linus Walleij
      • [PATCH v4 15/21] ARM: shmobile: armadillo-reference: Move st1232 reset GPIO to DT   Magnus Damm
      • [PATCH v4 15/21] ARM: shmobile: armadillo-reference: Move st1232 reset GPIO to DT   Laurent Pinchart
  • [PATCH v4 16/21] ARM: shmobile: armadillo-reference: Add LED1-LED4 to the device tree   Laurent Pinchart
  • [PATCH v4 17/21] ARM: shmobile: kzm9g-reference: Move pinctrl mappings to device tree   Laurent Pinchart
  • [PATCH v4 18/21] ARM: shmobile: kzm9g-reference: Move SDHI regulators to DT   Laurent Pinchart
  • [PATCH v4 19/21] ARM: shmobile: kzm9g-reference: Add LED1-LED4 to the device tree   Laurent Pinchart
  • [PATCH v4 20/21] ARM: shmobile: marzen-reference: Move pinctrl mappings to device tree   Laurent Pinchart
  • [PATCH v4 21/21] ARM: shmobile: marzen-reference: Add LED2-LED4 to the device tree   Laurent Pinchart
• [PATCH v4 01/21] sh-pfc: Remove support for platform data   Laurent Pinchart
  • [PATCH v4 01/21] sh-pfc: Remove support for platform data   Linus Walleij
• Patch merge request for STE Snowball build failure on linux-arm-soc-for-next.   Samuel Ortiz
• [PATCH] arm: omap: board-overo: reset GPIO for SMSC911x   Florian Vaussard
• [PATCH] ARM: dts: add max77686 node entry for ODROID-X   Dongjin Kim
• [PATCH v2 1/2] ARM: shmobile: r8a7790: implement CPU clock scaling for CPUFreq   Guennadi Liakhovetski
  • [PATCH v2 1/2] ARM: shmobile: r8a7790: implement CPU clock scaling for CPUFreq   Simon Horman
• [PATCH 0/3] pinctrl: pinctrl-single: Add full fledge support to configure multiple pins of different modules   Manjunathappa, Prakash
  • [PATCH 1/3] pinctrl: pinctrl-single: enhance to configure multiple pins of different modules   Manjunathappa, Prakash
  • [PATCH 2/3] pinctrl: pinctrl-single: pin names for pinctrl-single.bits   Manjunathappa, Prakash
  • [PATCH 3/3] ARM: davinci: da850: adopt to pinctrl-single driver to configure multiple pins   Manjunathappa, Prakash
  • [PATCH 0/3] pinctrl: pinctrl-single: Add full fledge support to configure multiple pins of different modules   Linus Walleij
    • [PATCH 0/3] pinctrl: pinctrl-single: Add full fledge support to configure multiple pins of different modules   Haojian Zhuang
• Query on pinctrl usage for DT nodes   Manjunathappa, Prakash
• [GIT PULL for 3.11] arm: introduce psci_smp_ops   Stefano Stabellini
  • [PATCH v11 1/2] arm: introduce psci_smp_ops   Stefano Stabellini
  • [PATCH v11 2/2] ARM: Enable selection of SMP operations at boot time   Stefano Stabellini
  • [GIT PULL for 3.11] arm: introduce psci_smp_ops   Stefano Stabellini
  • [GIT PULL for 3.11] arm: introduce psci_smp_ops   Stefano Stabellini
• [PATCH] ARM: Kirkwood: TS219: Fix crash by double PCIe instantiation   Andrew Lunn
  • [PATCH] ARM: Kirkwood: TS219: Fix crash by double PCIe instantiation   Jason Cooper
• [PATCH] arm: mvebu: enable two USB interfaces on the Armada XP GP board   Thomas Petazzoni
  • [PATCH] arm: mvebu: enable two USB interfaces on the Armada XP GP board   Jason Cooper
• [PATCH v2 0/3] staging: fix parallel display regressions   Markus Niebel
  • [PATCH v2 2/3] staging: drm/imx: fix spelling error for vsync flag config   Markus Niebel
  • [PATCH v2 3/3] staging: drm/imx: revert vsync_cnt for di->id 1   Markus Niebel
• [PATCH v2 1/3] staging: drm/imx: set correct sync pins for display   Markus Niebel
• [PATCH] v2 rtc-at91rm9200: add support for at91sam9x5   Douglas Gilbert
  • [PATCH] v2 rtc-at91rm9200: add support for at91sam9x5   Johan Hovold
• AT91SAM9260 I2C Driver   Elyas Razzaghi
• [RESEND][PATCH 1/2] clk: wm831x: Fix update wrong register for enable/disable FLL   Axel Lin
  • [RESEND][PATCH 2/2] clk: wm831x: Fix wm831x_clkout_get_parent   Axel Lin
• [PATCH v2 0/4] dma-mapping: Define dma_{alloc,free}_attrs() for all archs   Damian Hobson-Garcia
  • [PATCH v2 0/4] dma-mapping: Define dma_{alloc,free}_attrs() for all archs   Catalin Marinas
    • [PATCH v2 0/4] dma-mapping: Define dma_{alloc,free}_attrs() for all archs   Damian Hobson-Garcia
      • [PATCH v2 0/4] dma-mapping: Define dma_{alloc,free}_attrs() for all archs   Catalin Marinas
      • [PATCH v2 0/4] dma-mapping: Define dma_{alloc,free}_attrs() for all archs   Damian Hobson-Garcia
  • [PATCH v2 0/4] dma-mapping: Define dma_{alloc,free}_attrs() for all archs   Helge Deller
• [GIT PULL] Renesas ARM SoC based marzen board fix for v3.10   Simon Horman
• imx53 cspi clock problem   Jonas Andersson
  • imx53 cspi clock problem   Sascha Hauer
    • imx53 cspi clock problem   Jonas Andersson
      • imx53 cspi clock problem   Sascha Hauer
      • imx53 cspi clock problem   Jonas Andersson
• [PATCH 00/11] Convert GPIO Davinci to platform driver   Philip Avinash
  • [PATCH 02/11] gpio: davinci: coding style correction   Philip Avinash
    • [PATCH 02/11] gpio: davinci: coding style correction   Sergei Shtylyov
      • [PATCH 02/11] gpio: davinci: coding style correction   Philip, Avinash
    • [PATCH 02/11] gpio: davinci: coding style correction   Russell King - ARM Linux
      • [PATCH 02/11] gpio: davinci: coding style correction   Philip, Avinash
  • [PATCH 03/11] gpio: davinci: Modify to platform driver   Philip Avinash
    • [PATCH 03/11] gpio: davinci: Modify to platform driver   Linus Walleij
  • [PATCH 04/11] ARM: davinci: da8xx: creation of gpio platform device   Philip Avinash
    • [PATCH 04/11] ARM: davinci: da8xx: creation of gpio platform device   Linus Walleij
  • [PATCH 05/11] ARM: davinci: creation of gpio platform device for dm platforms   Philip Avinash
    • [PATCH 05/11] ARM: davinci: creation of gpio platform device for dm platforms   Linus Walleij
  • [PATCH 06/11] ARM: davinci: da8xx: gpio device creation   Philip Avinash
    • [PATCH 06/11] ARM: davinci: da8xx: gpio device creation   Linus Walleij
  • [PATCH 07/11] ARM: davinci: create davinci gpio device for dm platforms   Philip Avinash
    • [PATCH 07/11] ARM: davinci: create davinci gpio device for dm platforms   Linus Walleij
  • [PATCH 08/11] ARM: davinci: start using gpiolib support   Philip Avinash
    • [PATCH 08/11] ARM: davinci: start using gpiolib support   Linus Walleij
  • [PATCH 09/11] gpio: davinci: DT changes for driver   Philip Avinash
    • [PATCH 09/11] gpio: davinci: DT changes for driver   Linus Walleij
  • [PATCH 10/11] ARM: davinci: da850: add GPIO DT entries   Philip Avinash
  • [PATCH 11/11] ARM: davinci: da850 evm: add GPIO DT data   Philip Avinash
    • [PATCH 11/11] ARM: davinci: da850 evm: add GPIO DT data   Linus Walleij
  • [PATCH 00/11] Convert GPIO Davinci to platform driver   Linus Walleij
• [PATCH 01/11] ARM: davinci: GPIO: Add platform data structure   Philip Avinash
  • [PATCH 01/11] ARM: davinci: GPIO: Add platform data structure   Linus Walleij
• [PATCH] ARM: EXYNOS: add __cpuinit annotation to write_pen_release()   Jingoo Han
• [PATCH] ARM: ux500: register LP5521 LEDs in the device tree   Linus Walleij
  • [PATCH] ARM: ux500: register LP5521 LEDs in the device tree   Kim, Milo
  • [PATCH] ARM: ux500: register LP5521 LEDs in the device tree   Bryan Wu
• [PATCH 1/2] ARM: shmobile: r8a73a4: wait for completion when kicking the clock   Guennadi Liakhovetski
• [PATCH 2/2] ARM: shmobile: r8a73a4: implement CPU clock scaling for CPUFreq   Guennadi Liakhovetski
• [RFC] arm64: Add support to pass earlyprintk argument via device tree   Pranavkumar Sawargaonkar
  • [RFC] arm64: Add support to pass earlyprintk argument via device tree   Catalin Marinas
    • [RFC] arm64: Add support to pass earlyprintk argument via device tree   Pranavkumar Sawargaonkar
• [PATCH v4 5/7] ARM: mach-shmobile: sh73a0: Setup the timer CMT10 using DT   Simon Horman
• [RFC PATCH] ARM: mm: lazy cache flushing on non-mapped pages   Ming Lei
  • [RFC PATCH] ARM: mm: lazy cache flushing on non-mapped pages   Catalin Marinas
    • [RFC PATCH] ARM: mm: lazy cache flushing on non-mapped pages   Ming Lei
• [RC FIXES] Fix broken MMC devices on Snowball   Lee Jones
  • [PATCH] ARM: ux500: Allow Snowball to pass its own regulator settings   Lee Jones
    • [PATCH] ARM: ux500: Allow Snowball to pass its own regulator settings   Lee Jones
  • [PATCH] regulator: ab8500-ext: Don't register without initialisation data   Lee Jones
    • [PATCH] regulator: ab8500-ext: Don't register without initialisation data   Linus Walleij
      • [PATCH] regulator: ab8500-ext: Don't register without initialisation data   Arnd Bergmann
      • [PATCH] regulator: ab8500-ext: Don't register without initialisation data   Linus Walleij
    • [PATCH] regulator: ab8500-ext: Don't register without initialisation data   Mark Brown
      • [PATCH] regulator: ab8500-ext: Don't register without initialisation data   Lee Jones
      • [PATCH] regulator: ab8500-ext: Don't register without initialisation data   Mark Brown
      • [PATCH] regulator: ab8500-ext: Don't register without initialisation data   Lee Jones
      • [PATCH] regulator: ab8500-ext: Don't register without initialisation data   Mark Brown
      • [PATCH] regulator: ab8500-ext: Don't register without initialisation data   Lee Jones
      • [PATCH] regulator: ab8500-ext: Don't register without initialisation data   Mark Brown
      • [PATCH] regulator: ab8500-ext: Don't register without initialisation data   Lee Jones
    • [PATCH] regulator: ab8500-ext: Don't register without initialisation data   Lee Jones
• [PATCH] ARM: shmobile: kzm9g-reference: Update CMT clocksource rating to 80   Simon Horman
  • [PATCH] ARM: shmobile: kzm9g-reference: Update CMT clocksource rating to 80   Sergei Shtylyov
    • [PATCH] ARM: shmobile: kzm9g-reference: Update CMT clocksource rating to 80   Simon Horman
• [PATCH] ARM: ux500: regulators: Remove misleading comment   Lee Jones
  • [PATCH] ARM: ux500: regulators: Remove misleading comment   Lee Jones
  • [PATCH] ARM: ux500: regulators: Remove misleading comment   Linus Walleij
• [PATCH] regulator: ab8500: Remove external regulator init() clauses   Lee Jones
  • [PATCH] regulator: ab8500: Remove external regulator init() clauses   Linus Walleij
• [PATCH 0/4] Marvell PCIe driver improvements   Thomas Petazzoni
  • [PATCH 1/4] pci: mvebu: no longer fake the slot location of downstream devices   Thomas Petazzoni
  • [PATCH 2/4] pci: mvebu: allow the enumeration of devices beyond physical bridges   Thomas Petazzoni
    • [PATCH 2/4] pci: mvebu: allow the enumeration of devices beyond physical bridges   Bjorn Helgaas
  • [PATCH 3/4] pci: mvebu: emulate an empty capability list   Thomas Petazzoni
    • [PATCH 3/4] pci: mvebu: emulate an empty capability list   Bjorn Helgaas
      • [PATCH 3/4] pci: mvebu: emulate an empty capability list   Thomas Petazzoni
  • [PATCH 0/4] Marvell PCIe driver improvements   Jason Cooper
    • [PATCH 0/4] Marvell PCIe driver improvements   Gregory CLEMENT
      • [PATCH 0/4] Marvell PCIe driver improvements   Jason Cooper
  • [PATCH 0/4] Marvell PCIe driver improvements   Willy Tarreau
    • [PATCH 0/4] Marvell PCIe driver improvements   Thomas Petazzoni
      • [PATCH 0/4] Marvell PCIe driver improvements   Willy Tarreau
    • [PATCH 0/4] Marvell PCIe driver improvements   Jason Gunthorpe
      • [PATCH 0/4] Marvell PCIe driver improvements   Thomas Petazzoni
• [PATCH 4/4] pci: mvebu: fix the emulation of the status register   Thomas Petazzoni
  • [PATCH 4/4] pci: mvebu: fix the emulation of the status register   Bjorn Helgaas
• Самое благоприятное предложение для визитеров нашего сайта   labiopharyngealu
• [PATCH] ASoC: Add support for BCM2708   Florian Meier
  • [PATCH] ASoC: Add support for BCM2708   Stephen Warren
    • [PATCH] ASoC: Add support for BCM2708   Florian Meier
      • [PATCH] ASoC: Add support for BCM2708   Stephen Warren
      • [PATCH] ASoC: Add support for BCM2708   Florian Meier
      • [PATCH] ASoC: Add support for BCM2708   Mark Brown
  • [PATCH] ASoC: Add support for BCM2708   Mark Brown
    • [PATCH] ASoC: Add support for BCM2708   Florian Meier
  • [PATCH] ASoC: Add support for BCM2708   Lars-Peter Clausen
    • [PATCH] ASoC: Add support for BCM2708   Florian Meier
• [PATCH FOR v3.10 v2] ARM: shmobile: kzm9g-reference: Update CMT clocksource rating to 80   Simon Horman
  • [PATCH FOR v3.10 v2] ARM: shmobile: kzm9g-reference: Update CMT clocksource rating to 80   Sergei Shtylyov
    • [PATCH FOR v3.10 v2] ARM: shmobile: kzm9g-reference: Update CMT clocksource rating to 80   Simon Horman
• [PATCH 0/7] ARM: ux500: Change naming convention for pinctrl   Lee Jones
  • [PATCH 1/7] ARM: ux500: Standardise DBx5x0 based Pinctrl compat string in the DTS   Lee Jones
  • [PATCH 2/7] ARM: ux500: Standardise Nomadik STN8815 based Pinctrl compat string in the DTS   Lee Jones
    • [PATCH 2/7] ARM: ux500: Standardise Nomadik STN8815 based Pinctrl compat string in the DTS   Linus Walleij
  • [PATCH 3/7] ARM: ux500: Standardise Pinctrl compatible string for Nomadik based platforms   Lee Jones
    • [PATCH 3/7] ARM: ux500: Standardise Pinctrl compatible string for Nomadik based platforms   Linus Walleij
  • [PATCH 4/7] ARM: ux500: Standardise Pinctrl compatible string for DBx5x based platforms   Lee Jones
  • [PATCH 5/7] pinctrl/nomadik: Standardise Pinctrl compat string for Nomadik based platforms   Lee Jones
    • [PATCH 5/7] pinctrl/nomadik: Standardise Pinctrl compat string for Nomadik based platforms   Linus Walleij
  • [PATCH 6/7] pinctrl/nomadik: Standardise Pinctrl compat string for DBx5x based platforms   Lee Jones
  • [PATCH 7/7] Documentation: Update binding for Nomadik and DBx5x based platforms   Lee Jones
    • [PATCH 7/7] Documentation: Update binding for Nomadik and DBx5x based platforms   Linus Walleij
      • [PATCH 7/7] Documentation: Update binding for Nomadik and DBx5x based platforms   Lee Jones
      • [PATCH 7/7] Documentation: Update binding for Nomadik and DBx5x based platforms   Linus Walleij
      • [PATCH 7/7] Documentation: Update binding for Nomadik and DBx5x based platforms   Lee Jones
  • [PATCH 0/7] ARM: ux500: Change naming convention for pinctrl   Linus Walleij
• [PATCH 0/5] ARM: dts: OMAP2+: use preprocessor for device trees   Florian Vaussard
  • [PATCH 1/5] ARM: dts: OMAP2+: use #include for all device trees   Florian Vaussard
    • [PATCH 1/5] ARM: dts: OMAP2+: use #include for all device trees   Tony Lindgren
      • [PATCH 1/5] ARM: dts: OMAP2+: use #include for all device trees   Florian Vaussard
  • [PATCH 2/5] ARM: dts: OMAP2+: create a DT header for GPIO   Florian Vaussard
    • [PATCH 2/5] ARM: dts: OMAP2+: create a DT header for GPIO   Stephen Warren
      • [PATCH 2/5] ARM: dts: OMAP2+: create a DT header for GPIO   Tony Lindgren
      • [PATCH 2/5] ARM: dts: OMAP2+: create a DT header for GPIO   Florian Vaussard
      • [PATCH 2/5] ARM: dts: OMAP2+: create a DT header for GPIO   Stephen Warren
  • [PATCH 3/5] ARM: dts: OMAP2+: convert DT files to use the new OMAP_GPIO macro   Florian Vaussard
    • [PATCH 3/5] ARM: dts: OMAP2+: convert DT files to use the new OMAP_GPIO macro   Stephen Warren
      • [PATCH 3/5] ARM: dts: OMAP2+: convert DT files to use the new OMAP_GPIO macro   Florian Vaussard
  • [PATCH 4/5] ARM: dts: OMAP3: fix incorrect notation for musb-hdrc interrupt   Florian Vaussard
    • [PATCH 4/5] ARM: dts: OMAP3: fix incorrect notation for musb-hdrc interrupt   Tony Lindgren
  • [PATCH 5/5] ARM: dts: OMAP4/5: use existing constants for IRQs   Florian Vaussard
• [PATCH] ARM: ux500: Apply other compatible name to the u8540 DTS file   Lee Jones
  • [PATCH] ARM: ux500: Apply other compatible name to the u8540 DTS file   Arnd Bergmann
  • [PATCH v2] ARM: ux500: Apply other compatible name to the u8540 DTS file   Lee Jones
    • [PATCH v2] ARM: ux500: Apply other compatible name to the u8540 DTS file   Linus Walleij
• [PATCH v3] ARM: shmobile: sh73a0: Update CMT clockevent rating to 80   Simon Horman
• [PATCH 13/14] sched: update the cpu_power   Morten Rasmussen
  • [PATCH 13/14] sched: update the cpu_power   Vincent Guittot
• [PATCH 11/14] sched: filter task pull request   Morten Rasmussen
  • [PATCH 11/14] sched: filter task pull request   Vincent Guittot
• [PATCH] input: sirfsoc_pwrc: add onkey input driver for CSR SiRFprimaII PWRC   Barry Song
  • [PATCH] input: sirfsoc_pwrc: add onkey input driver for CSR SiRFprimaII PWRC   Madhvapathi Sriram
    • [PATCH] input: sirfsoc_pwrc: add onkey input driver for CSR SiRFprimaII PWRC   Barry Song
      • [PATCH] input: sirfsoc_pwrc: add onkey input driver for CSR SiRFprimaII PWRC   Madhvapathi Sriram
      • [PATCH] input: sirfsoc_pwrc: add onkey input driver for CSR SiRFprimaII PWRC   Barry Song
    • [PATCH] input: sirfsoc_pwrc: add onkey input driver for CSR SiRFprimaII PWRC   Dmitry Torokhov
  • [PATCH] input: sirfsoc_pwrc: add onkey input driver for CSR SiRFprimaII PWRC   Dmitry Torokhov
• [PATCH 09/14] sched: evaluate the activity level of the system   Morten Rasmussen
  • [PATCH 09/14] sched: evaluate the activity level of the system   Vincent Guittot
• [PATCH v2] arm64: extable: sort the exception table at build time   Will Deacon
  • [PATCH v2] arm64: extable: sort the exception table at build time   Will Deacon
• [RFC PATCH 0/4] regulator/OMAP: support VC/VP support in dts   Nishanth Menon
  • [RFC PATCH 1/4] regulator: Introduce OMAP regulator to control PMIC over VC/VP   Nishanth Menon
  • [RFC PATCH 2/4] PM / AVS: Introduce support for OMAP Voltage Controller(VC) with device tree nodes   Nishanth Menon
  • [RFC PATCH 3/4] PM / AVS: Introduce support for OMAP Voltage Processor(VP) with device tree nodes   Nishanth Menon
  • [RFC PATCH 4/4] HACK: OMAP4460/TPS/TWL/PandaBoardES - Enable VP regulator for cpufreq   Nishanth Menon
• [RFC/PATCH 0/2] Remove most of_device_match() calls   Stephen Boyd
  • [RFC/PATCH 1/2] of: Assign of_device_id to matching device_node   Stephen Boyd
  • [RFC/PATCH 2/2] gpio/omap: Use of_node->id_entry directly   Stephen Boyd
  • [RFC/PATCH 0/2] Remove most of_device_match() calls   Rob Herring
• [PATCH v5] arm: Preserve the user r/w register TPIDRURW on context switch and fork   André Hentschel
• [PATCH v4 4/7] ARM: shmobile: sh73a0: Add timer DT names to clock list   Simon Horman
• [PATCH v4 1/7] ARM: shmobile: Define DT bindings for timer devices   Simon Horman
• [PATCH v4 2/7] clocksource: sh_cmt: Add OF support   Simon Horman
• [PATCH v4 3/7] clocksource: sh_tmu: Add OF support   Simon Horman
• [PATCH 1/2] ARM: add support for kernel mode NEON/VFP   Ard Biesheuvel
• [PATCH 2/2] ARM: move VFP init to an earlier boot stage   Ard Biesheuvel
  • [PATCH 2/2] ARM: move VFP init to an earlier boot stage   Russell King - ARM Linux
    • [PATCH 2/2] ARM: move VFP init to an earlier boot stage   Ard Biesheuvel
    • [PATCH 2/2] ARM: move VFP init to an earlier boot stage   Nicolas Pitre
      • [PATCH 2/2] ARM: move VFP init to an earlier boot stage   Ard Biesheuvel
      • [PATCH 2/2] ARM: move VFP init to an earlier boot stage   Nicolas Pitre
      • [PATCH 2/2] ARM: move VFP init to an earlier boot stage   Ard Biesheuvel
• [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   Chen Gang
  • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   Geert Uytterhoeven
    • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   Arnd Bergmann
    • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   Russell King - ARM Linux
      • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   Geert Uytterhoeven
      • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   Arnd Bergmann
      • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   Russell King - ARM Linux
      • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   Chen Gang
      • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   Arnd Bergmann
      • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   Chen Gang
      • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   Russell King - ARM Linux
      • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   Arnd Bergmann
      • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   Russell King - ARM Linux
      • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   Geert Uytterhoeven
      • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   Chen Gang
      • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   Chen Gang
      • [PATCH v2] arch: configuration issue, random return value when disable 'CONFIG_BUG'   Chen Gang
      • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   Ingo Molnar
      • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   Chen Gang
      • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   Arnd Bergmann
      • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   H. Peter Anvin
      • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   Arnd Bergmann
      • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   H. Peter Anvin
      • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   Arnd Bergmann
      • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   Eric W. Biederman
      • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   Russell King - ARM Linux
      • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   Chen Gang
  • [PATCH] arch: configuration, deleting 'CONFIG_BUG' since always need it.   Eric W. Biederman
• [PATCH V2 0/6] ARM: imx6q{dl}: add the WEIM driver   Huang Shijie
  • [PATCH V2 2/6] ARM: dts: imx6q{dl}: fix the pin conflict between SPI and WEIM   Huang Shijie
  • [PATCH V2 4/6] ARM: dts: imx6q: add pinctrl for WEIM NOR   Huang Shijie
    • Re: [PATCH V2 4/6] ARM: dts: imx6q: add pinctrl for WEIM NOR   Alexander Shiyan
      • [PATCH V2 4/6] ARM: dts: imx6q: add pinctrl for WEIM NOR   Huang Shijie
      • Re[2]: [PATCH V2 4/6] ARM: dts: imx6q: add pinctrl for WEIM NOR   Alexander Shiyan
      • [PATCH V2 4/6] ARM: dts: imx6q: add pinctrl for WEIM NOR   Huang Shijie
      • Re[2]: [PATCH V2 4/6] ARM: dts: imx6q: add pinctrl for WEIM NOR   Alexander Shiyan
      • [PATCH V2 4/6] ARM: dts: imx6q: add pinctrl for WEIM NOR   Huang Shijie
  • [PATCH V2 6/6] ARM: dts: imx6qdl: enable the WEIM NOR   Huang Shijie
• [PATCH V2 1/6] drivers: bus: add a new driver for WEIM   Huang Shijie
  • Re: [PATCH V2 1/6] drivers: bus: add a new driver for WEIM   Alexander Shiyan
    • [PATCH V2 1/6] drivers: bus: add a new driver for WEIM   Huang Shijie
  • [PATCH V2 1/6] drivers: bus: add a new driver for WEIM   Sascha Hauer
    • [PATCH V2 1/6] drivers: bus: add a new driver for WEIM   Huang Shijie
      • [PATCH V2 1/6] drivers: bus: add a new driver for WEIM   Arnd Bergmann
      • [PATCH V2 1/6] drivers: bus: add a new driver for WEIM   Sascha Hauer
      • [PATCH V2 1/6] drivers: bus: add a new driver for WEIM   Arnd Bergmann
      • [PATCH V2 1/6] drivers: bus: add a new driver for WEIM   Huang Shijie
      • [PATCH V2 1/6] drivers: bus: add a new driver for WEIM   Sascha Hauer
  • [PATCH V2 1/6] drivers: bus: add a new driver for WEIM   Russell King - ARM Linux
    • [PATCH V2 1/6] drivers: bus: add a new driver for WEIM   Huang Shijie
• [PATCH V2 3/6] ARM: dts: imx6qdl: add more information for WEIM   Huang Shijie
• [PATCH V2 5/6] ARM: dts: imx6dl: add a pinctrl for WEIM NOR   Huang Shijie
• [PATCH v3 0/5] rtc-at91rm9200: add shadow interrupt mask   Johan Hovold
  • [PATCH v3 1/5] rtc-at91rm9200: add match-table compile guard   Johan Hovold
  • [PATCH v3 2/5] rtc-at91rm9200: add configuration support   Johan Hovold
  • [PATCH v3 3/5] rtc-at91rm9200: refactor interrupt-register handling   Johan Hovold
  • [PATCH v3 4/5] rtc-at91rm9200: add shadow interrupt mask   Johan Hovold
  • [PATCH v3 5/5] rtc-at91rm9200: use shadow IMR on at91sam9x5   Johan Hovold
  • [PATCH v3 0/5] rtc-at91rm9200: add shadow interrupt mask   Andrew Morton
    • [PATCH v3 0/5] rtc-at91rm9200: add shadow interrupt mask   Robert Nelson
      • [PATCH v3 0/5] rtc-at91rm9200: add shadow interrupt mask   Douglas Gilbert
      • [PATCH v3 0/5] rtc-at91rm9200: add shadow interrupt mask   Nicolas Ferre
      • [PATCH v3 0/5] rtc-at91rm9200: add shadow interrupt mask   Nicolas Ferre
      • [PATCH v3 0/5] rtc-at91rm9200: add shadow interrupt mask   Andrew Morton
      • [PATCH v3 0/5] rtc-at91rm9200: add shadow interrupt mask   Douglas Gilbert
      • [PATCH v3 0/5] rtc-at91rm9200: add shadow interrupt mask   Nicolas Ferre
  • [PATCH v3 0/5] rtc-at91rm9200: add shadow interrupt mask   Nicolas Ferre
• [PATCH 0/3] ARM: at91: move aic driver to drivers/irqchip   Boris BREZILLON
  • [PATCH 1/3] ARM: at91: move at91 aic driver to drivers/irqchip   Boris BREZILLON
  • [PATCH 2/3] ARM: at91: use IRQCHIP_DECLARE instead of machine specific init_irq   Boris BREZILLON
  • [PATCH 3/3] ARM: at91: use set_handle_irq instead of machine specific handle_irq   Boris BREZILLON
  • [PATCH 0/3] ARM: at91: move aic driver to drivers/irqchip   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH for 3.10-rc] ARM: mvebu: Fix bug in coherency fabric low level init function   Gregory CLEMENT
  • [PATCH] ARM: mvebu: Fix bug in coherency fabric low level init function   Gregory CLEMENT
    • [PATCH] ARM: mvebu: Fix bug in coherency fabric low level init function   Jason Cooper
    • [PATCH] ARM: mvebu: Fix bug in coherency fabric low level init function   Willy Tarreau
• [RESEND PATCH 0/3] ARM: at91: move aic driver to drivers/irqchip   Boris BREZILLON
  • [PATCH 1/3] ARM: at91: move at91 aic driver to drivers/irqchip   Boris BREZILLON
    • [PATCH 1/3] ARM: at91: move at91 aic driver to drivers/irqchip   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/3] ARM: at91: move at91 aic driver to drivers/irqchip   boris brezillon
      • [PATCH 1/3] ARM: at91: move at91 aic driver to drivers/irqchip   Thomas Petazzoni
      • [PATCH 1/3] ARM: at91: move at91 aic driver to drivers/irqchip   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/3] ARM: at91: move at91 aic driver to drivers/irqchip   Thomas Petazzoni
      • [PATCH 1/3] ARM: at91: move at91 aic driver to drivers/irqchip   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/3] ARM: at91: move at91 aic driver to drivers/irqchip   Thomas Petazzoni
      • [PATCH 1/3] ARM: at91: move at91 aic driver to drivers/irqchip   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/3] ARM: at91: move at91 aic driver to drivers/irqchip   Thomas Petazzoni
      • [PATCH 1/3] ARM: at91: move at91 aic driver to drivers/irqchip   Nicolas Ferre
    • [PATCH 1/3] ARM: at91: move at91 aic driver to drivers/irqchip   Russell King - ARM Linux
      • [PATCH 1/3] ARM: at91: move at91 aic driver to drivers/irqchip   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/3] ARM: at91: move at91 aic driver to drivers/irqchip   Thomas Petazzoni
      • [PATCH 1/3] ARM: at91: move at91 aic driver to drivers/irqchip   Boris BREZILLON
      • [PATCH 1/3] ARM: at91: move at91 aic driver to drivers/irqchip   boris brezillon
  • [PATCH 2/3] ARM: at91: use IRQCHIP_DECLARE instead of machine specific init_irq   Boris BREZILLON
  • [PATCH 3/3] ARM: at91: use set_handle_irq instead of machine specific handle_irq   Boris BREZILLON
• [PATCH] ARM: kirkwood: refactor dtsi to largest common nodes   Valentin Longchamp
  • [PATCH] ARM: kirkwood: refactor dtsi to largest common nodes   Jason Cooper
    • [PATCH] ARM: kirkwood: refactor dtsi to largest common nodes   Valentin Longchamp
• [PATCH V2 0/3] mmc: mmci: Support ap_sleep in cpuidle for ux500   Ulf Hansson
  • [PATCH V2 1/3] mmc: mmci: Use optional sleep pinctrl state   Ulf Hansson
  • [PATCH V2 2/3] mmc: mmci: Adapt to register write restrictions   Ulf Hansson
  • [PATCH V2 3/3] mmc: mmci: Save and restore register context   Ulf Hansson
  • [PATCH V2 0/3] mmc: mmci: Support ap_sleep in cpuidle for ux500   Rickard ANDERSSON
• [PATCH] at91: sama5: fix incorrect PMC pcr div definition   Josh Wu
  • [PATCH] at91: sama5: fix incorrect PMC pcr div definition   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH] at91: sama5: fix incorrect PMC pcr div definition   Ludovic Desroches
  • [PATCH] at91: sama5: fix incorrect PMC pcr div definition   Nicolas Ferre
• [GIT PULL] ARM DT cpus/cpu bindings documentation updates   Lorenzo Pieralisi
• [PATCH] clk: exynos5250: Added MUX, DIV and GATE clocks for Gscaler and MFC   Arun Kumar K
• [GIT PULL] ARM dts cpus/cpu nodes updates   Lorenzo Pieralisi
• [PATCH 3/3] ARM: cacheflush: add new iovec-based cache flushing system call   Will Deacon
• [RFC V6 PATCH 0/3] USB: OHCI: Start splitting up the driver   Manjunath Goudar
  • [RFC V6 PATCH 1/3] USB: OHCI: prepare to make ohci-hcd a library module   Manjunath Goudar
    • [RFC V6 PATCH 1/3] USB: OHCI: prepare to make ohci-hcd a library module   Alan Stern
  • [RFC PATCH 2/3] USB: OHCI: Generic changes to make ohci-pci a separate driver   Manjunath Goudar
    • [RFC PATCH 2/3] USB: OHCI: Generic changes to make ohci-pci a separate driver   Arnd Bergmann
    • [RFC PATCH 2/3] USB: OHCI: Generic changes to make ohci-pci a separate driver   Alan Stern
  • [RFC V6 PATCH 3/3] USB: OHCI: make ohci-pci a separate driver   Manjunath Goudar
    • [RFC V6 PATCH 3/3] USB: OHCI: make ohci-pci a separate driver   Alan Stern
      • [RFC V6 PATCH 3/3] USB: OHCI: make ohci-pci a separate driver   Arnd Bergmann
      • [RFC V6 PATCH 3/3] USB: OHCI: make ohci-pci a separate driver   Alan Stern
      • [RFC V6 PATCH 3/3] USB: OHCI: make ohci-pci a separate driver   Arnd Bergmann
• [PATCH] dmatest: do not allow to interrupt ongoing tests   Andy Shevchenko
  • [PATCH] dmatest: do not allow to interrupt ongoing tests   Andy Shevchenko
• [PATCH] ARM: dts: imx: fix clocks for cspi   Jonas Andersson
  • [PATCH] ARM: dts: imx: fix clocks for cspi   Sascha Hauer
  • Re: [PATCH] ARM: dts: imx: fix clocks for cspi   Alexander Shiyan
    • Re[2]: [PATCH] ARM: dts: imx: fix clocks for cspi   Alexander Shiyan
      • [PATCH] ARM: dts: imx: fix clocks for cspi   Sascha Hauer
      • Re[2]: [PATCH] ARM: dts: imx: fix clocks for cspi   Alexander Shiyan
      • [PATCH] ARM: dts: imx: fix clocks for cspi   Sascha Hauer
      • Re[2]: [PATCH] ARM: dts: imx: fix clocks for cspi   Alexander Shiyan
  • [PATCH] ARM: dts: imx: fix clocks for cspi   Shawn Guo
• [GIT PULL] ARM cpu logical map init updates   Lorenzo Pieralisi
• mxsfb: DATA_FORMAT_24_BIT flag outputs invalid colours   maxime.ripard at free-electrons.com
  • mxsfb: DATA_FORMAT_24_BIT flag outputs invalid colours   Juergen Beisert
    • mxsfb: DATA_FORMAT_24_BIT flag outputs invalid colours   Hector Palacios
      • mxsfb: DATA_FORMAT_24_BIT flag outputs invalid colours   Juergen Beisert
      • mxsfb: DATA_FORMAT_24_BIT flag outputs invalid colours   Hector Palacios
      • mxsfb: DATA_FORMAT_24_BIT flag outputs invalid colours   Juergen Beisert
      • mxsfb: DATA_FORMAT_24_BIT flag outputs invalid colours   Juergen Beisert
    • mxsfb: DATA_FORMAT_24_BIT flag outputs invalid colours   maxime.ripard at free-electrons.com
• [PATCH 0/6] ARM: ux500: Update configurations for SD/SDIO/(e)MMC   Ulf Hansson
  • [PATCH 1/6] ARM: ux500: Enable 100MHz for SD/SDIO/MMC devices   Ulf Hansson
    • [PATCH 1/6] ARM: ux500: Enable 100MHz for SD/SDIO/MMC devices   Linus Walleij
  • [PATCH 2/6] ARM: ux500: Don't set plf ocr mask for SD/MMC device   Ulf Hansson
    • [PATCH 2/6] ARM: ux500: Don't set plf ocr mask for SD/MMC device   Linus Walleij
  • [PATCH 3/6] ARM: ux500: Enable support for RPMB and Reliable Write for eMMC   Ulf Hansson
    • [PATCH 3/6] ARM: ux500: Enable support for RPMB and Reliable Write for eMMC   Linus Walleij
      • [PATCH 3/6] ARM: ux500: Enable support for RPMB and Reliable Write for eMMC   Ulf Hansson
  • [PATCH 4/6] ARM: ux500: Enable support for discard for MMC/SD   Ulf Hansson
    • [PATCH 4/6] ARM: ux500: Enable support for discard for MMC/SD   Linus Walleij
  • [PATCH 5/6] ARM: ux500: Set eMMC and WLAN card slot as non-removable   Ulf Hansson
    • [PATCH 5/6] ARM: ux500: Set eMMC and WLAN card slot as non-removable   Linus Walleij
  • [PATCH 6/6] ARM: ux500: Enable support for UHS-I SD-cards   Ulf Hansson
    • [PATCH 6/6] ARM: ux500: Enable support for UHS-I SD-cards   Linus Walleij
  • [PATCH 0/6] ARM: ux500: Update configurations for SD/SDIO/(e)MMC   Lee Jones
    • [PATCH 0/6] ARM: ux500: Update configurations for SD/SDIO/(e)MMC   Lee Jones
• [PATCH 1/4] ARM: davinci: uart: move to dev_id based clk_get   Manjunathappa, Prakash
• [PATCH v2 0/6] Support new Marvell bootloaders for Armada 370/XP   Thomas Petazzoni
  • [PATCH v2 5/6] arm: mvebu: don't hardcode a physical address in headsmp.S   Thomas Petazzoni
  • [PATCH v2 6/6] arm: mvebu: support new bootloaders shipped by Marvell   Thomas Petazzoni
    • [PATCH v2 6/6] arm: mvebu: support new bootloaders shipped by Marvell   Andrew Lunn
  • [PATCH v2 0/6] Support new Marvell bootloaders for Armada 370/XP   Gregory CLEMENT
• [PATCH v2 1/6] arm: mvebu: remove dependency of SMP init on static I/O mapping   Thomas Petazzoni
• [PATCH v2 2/6] arm: mvebu: avoid hardcoded virtual address in coherency code   Thomas Petazzoni
• [PATCH v2 3/6] arm: mvebu: move cache and mvebu-mbus initialization later   Thomas Petazzoni
• [PATCH v2 4/6] arm: mvebu: remove hardcoded static I/O mapping   Thomas Petazzoni
• [PATCH v2 0/3] Marvell PCIe driver improvements   Thomas Petazzoni
  • [PATCH v2 1/3] pci: mvebu: no longer fake the slot location of downstream devices   Thomas Petazzoni
  • [PATCH v2 2/3] pci: mvebu: allow the enumeration of devices beyond physical bridges   Thomas Petazzoni
  • [PATCH v2 3/3] pci: mvebu: fix the emulation of the status register   Thomas Petazzoni
  • [PATCH v2 0/3] Marvell PCIe driver improvements   Bjorn Helgaas
    • [PATCH v2 0/3] Marvell PCIe driver improvements   Jason Cooper
  • [PATCH v2 0/3] Marvell PCIe driver improvements   Jason Cooper
    • [PATCH v2 0/3] Marvell PCIe driver improvements   Thomas Petazzoni
• [PATCH] Add congatec conga-QEVAL minimal board support   SARTRE Leo
• [PATCH v2 0/4] ARM: mm: HugeTLB + THP support.   Steve Capper
  • [PATCH v2 1/4] ARM: mm: correct pte_same behaviour for LPAE.   Steve Capper
    • [PATCH v2 1/4] ARM: mm: correct pte_same behaviour for LPAE.   Catalin Marinas
  • [PATCH v2 2/4] ARM: mm: Add support for flushing HugeTLB pages.   Steve Capper
    • [PATCH v2 2/4] ARM: mm: Add support for flushing HugeTLB pages.   Catalin Marinas
  • [PATCH v2 3/4] ARM: mm: HugeTLB support for LPAE systems.   Steve Capper
    • [PATCH v2 3/4] ARM: mm: HugeTLB support for LPAE systems.   Catalin Marinas
      • [PATCH v2 3/4] ARM: mm: HugeTLB support for LPAE systems.   Steve Capper
  • [PATCH v2 4/4] ARM: mm: Transparent huge page support for LPAE systems.   Steve Capper
• [PATCH v2 0/5] ARM: dts: OMAP2+: use preprocessor for device trees   Florian Vaussard
  • [PATCH v2 1/5] ARM: dts: OMAP2+: use #include for all device trees   Florian Vaussard
  • [PATCH v2 2/5] ARM: dts: OMAP2+: use existing constants for GPIOs   Florian Vaussard
    • [PATCH v2 2/5] ARM: dts: OMAP2+: use existing constants for GPIOs   Tony Lindgren
  • [PATCH v2 3/5] ARM: dts: OMAP4/5: use existing constants for IRQs   Florian Vaussard
  • [PATCH v2 4/5] ARM: dts: OMAP2+: header file for pinctrl constants   Florian Vaussard
  • [PATCH v2 5/5] ARM: dts: OMAP2+: use pinctrl constants   Florian Vaussard
    • [PATCH v2 5/5] ARM: dts: OMAP2+: use pinctrl constants   Tony Lindgren
      • [PATCH v2 5/5] ARM: dts: OMAP2+: use pinctrl constants   Florian Vaussard
  • [PATCH v2 0/5] ARM: dts: OMAP2+: use preprocessor for device trees   Santosh Shilimkar
    • [PATCH v2 0/5] ARM: dts: OMAP2+: use preprocessor for device trees   Florian Vaussard
  • [PATCH v2 0/5] ARM: dts: OMAP2+: use preprocessor for device trees   Stephen Warren
    • [PATCH v2 0/5] ARM: dts: OMAP2+: use preprocessor for device trees   Florian Vaussard
• [PATCH v2 0/3]