[PATCH 2/6] ARM: ux500: Add Device Tree nodes for the ux500 Hash device

[Lee Jones]

This patch provides information required to setup ux500-hash when
booting with DT on the Snowball low-cost development platform.

Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 arch/arm/boot/dts/dbx5x0.dtsi  |    8 ++++++++
 arch/arm/boot/dts/snowball.dts |    4 ++++
 2 files changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 92fd4b74..6c25fbe 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -764,5 +764,13 @@
 			v-ape-supply = <&db8500_vape_reg>;
 			status = "disabled";
 		};
+
+		hash at a03c2000 {
+			compatible = "stericsson,ux500-hash";
+			reg = <0xa03c2000 0x1000>;
+
+			v-ape-supply = <&db8500_vape_reg>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index de585fd..3cadb5b 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -354,5 +354,9 @@
 		cryp at a03cb000 {
 			status = "okay";
 		};
+
+		hash at a03c2000 {
+			status = "okay";
+		};
 	};
 };
-- 
1.7.10.4