[PATCH 1/6] ARM: ux500: Add Device Tree nodes for the ux500 Crypt device

[Lee Jones]

This patch provides information required to setup ux500-crypt when
booting with DT on the Snowball low-cost development platform.

Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 arch/arm/boot/dts/dbx5x0.dtsi  |    9 +++++++++
 arch/arm/boot/dts/snowball.dts |    4 ++++
 2 files changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index fd5794a..92fd4b74 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -755,5 +755,14 @@
 
 			status = "disabled";
 		};
+
+		cryp at a03cb000 {
+			compatible = "stericsson,ux500-cryp";
+			reg = <0xa03cb000 0x1000>;
+			interrupts = <0 15 0x4>;
+
+			v-ape-supply = <&db8500_vape_reg>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index db5db24..de585fd 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -350,5 +350,9 @@
 				};
 			};
 		};
+
+		cryp at a03cb000 {
+			status = "okay";
+		};
 	};
 };
-- 
1.7.10.4