[PATCH 1/6] drivers: bus: add a new driver for WEIM
Huang Shijie
b32955 at freescale.com
Mon May 20 04:48:57 EDT 2013
The WEIM(Wireless External Interface Module) works like a bus.
You can attach many different devices on it, such as NOR, onenand.
In the case of i.MX6q-sabreauto, the NOR is connected to WEIM.
This patch also adds the devicetree binding document.
The driver only works when the devicetree is enabled.
Signed-off-by: Huang Shijie <b32955 at freescale.com>
---
Documentation/devicetree/bindings/bus/imx-weim.txt | 69 +++++++++
drivers/bus/Kconfig | 9 ++
drivers/bus/Makefile | 1 +
drivers/bus/imx-weim.c | 145 ++++++++++++++++++++
4 files changed, 224 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/bus/imx-weim.txt
create mode 100644 drivers/bus/imx-weim.c
diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt
new file mode 100644
index 0000000..9913454
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/imx-weim.txt
@@ -0,0 +1,69 @@
+Device tree bindings for i.MX Wireless External Interface Module (WEIM)
+
+The term “wireless†does not imply that the WEIM is literally an interface
+without wires. It simply means that this module was originally designed for
+wireless and mobile applications that use low-power technology.
+
+The actual devices are instantiated from the child nodes of a WEIM node.
+But now we only have the NOR device.
+
+NOR flash connected to the WEIM (found on i.MX boards) are represented as
+child nodes with a name of "nor".
+
+Required properties:
+
+ - compatible: Should be set to "fsl, imx6q-weim"
+ - reg: A resource specifier for the register space
+ (see the example below)
+ - interrupts: the interrupt number, see the example below.
+ - clocks: the clock, see the example below.
+ - #address-cells: Must be set to 2 to allow memory address translation
+ - #size-cells: Must be set to 1 to allow CS address passing
+ - ranges: Must be set up to reflect the memory layout with four
+ integer values for each chip-select line in use:
+
+ <cs-number> 0 <physical address of mapping> <size>
+
+Timing properties for child nodes. All are mandatory, not optional.
+
+ -weim-cs-index: The CS index which the device is attaching on.
+ -weim-cs-timing: The timing array, contains 6 timing values for the
+ weim-cs-index.
+
+Example for an i.MX6q-sabreauto board:
+ weim: weim at 021b8000 {
+ compatible = "fsl,imx6q-weim";
+ reg = <0x021b8000 0x4000>;
+ interrupts = <0 14 0x04>;
+ clocks = <&clks 196>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x08000000 0x08000000>;
+
+ nor at 0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x02000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <2>;
+
+ weim-cs-index = <0>;
+ weim-cs-timing = <0x00620081 0x00000001 0x1C022000
+ 0x0000C000 0x1404a38e 0x00000000>;
+ partition at 0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ };
+
+ partition at 40000 {
+ label = "U-Boot-ENV";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ label = "Kernel";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index b05ecab..0f997af 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -4,6 +4,15 @@
menu "Bus devices"
+config IMX_WEIM
+ tristate "Freescale EIM DRIVER"
+ depends on ARCH_MXC && MTD_PHYSMAP_OF
+ help
+ Driver for i.MX6 WEIM controller.
+ The WEIM(Wireless External Interface Module) works like a bus.
+ You can attach many different devices on it, such as NOR, onenand.
+ But now, we only support the Parallel NOR.
+
config MVEBU_MBUS
bool
depends on PLAT_ORION
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index 3c7b53c..436bbcc 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -2,6 +2,7 @@
# Makefile for the bus drivers.
#
+obj-$(CONFIG_IMX_WEIM) += imx-weim.o
obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o
obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o
diff --git a/drivers/bus/imx-weim.c b/drivers/bus/imx-weim.c
new file mode 100644
index 0000000..8bd9362
--- /dev/null
+++ b/drivers/bus/imx-weim.c
@@ -0,0 +1,145 @@
+/*
+ * EIM driver for Freescale's i.MX chips
+ *
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/of_device.h>
+
+struct imx_weim {
+ void __iomem *base;
+ struct clk *clk;
+};
+
+static const struct of_device_id weim_id_table[] = {
+ { .compatible = "fsl,imx6q-weim", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, weim_id_table);
+
+#define CS_TIMING_LEN 6
+#define CS_REG_RANGE 0x18
+/* Parse and set the timing for this device. */
+static int weim_timing(struct platform_device *pdev, struct device_node *np)
+{
+ struct imx_weim *weim = platform_get_drvdata(pdev);
+ u32 value[CS_TIMING_LEN];
+ u32 cs_idx;
+ int ret;
+ int i;
+
+ ret = of_property_read_u32(np, "weim-cs-index", &cs_idx);
+ if (ret)
+ goto weim_parse_err;
+
+ ret = of_property_read_u32_array(np, "weim-cs-timing",
+ value, CS_TIMING_LEN);
+ if (ret)
+ goto weim_parse_err;
+
+ /* set the timing for WEIM */
+ for (i = 0; i < CS_TIMING_LEN; i++)
+ writel(value[i], weim->base + cs_idx * CS_REG_RANGE + i * 4);
+ return 0;
+
+weim_parse_err:
+ return ret;
+}
+
+static int weim_parse_dt(struct platform_device *pdev)
+{
+ struct device_node *child;
+ int ret;
+
+ /* We only support the Parallel NOR now. We may add more in future. */
+ child = of_find_node_by_name(NULL, "nor");
+ if (child) {
+ ret = weim_timing(pdev, child);
+ if (ret)
+ goto parse_fail;
+
+ if (!of_platform_device_create(child, NULL, &pdev->dev)) {
+ ret = -EINVAL;
+ goto parse_fail;
+ }
+ }
+ return 0;
+
+parse_fail:
+ return ret;
+}
+
+static int weim_probe(struct platform_device *pdev)
+{
+ struct imx_weim *weim;
+ struct resource *res;
+ int ret = -EINVAL;
+
+ weim = devm_kzalloc(&pdev->dev, sizeof(*weim), GFP_KERNEL);
+ if (!weim) {
+ ret = -ENOMEM;
+ goto weim_err;
+ }
+ platform_set_drvdata(pdev, weim);
+
+ /* get the resource */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ ret = -ENOENT;
+ goto weim_err;
+ }
+
+ weim->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(weim->base)) {
+ ret = PTR_ERR(weim->base);
+ goto weim_err;
+ }
+
+ /* get the clock */
+ weim->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(weim->clk))
+ goto weim_err;
+
+ clk_prepare_enable(weim->clk);
+
+ /* parse the device node */
+ ret = weim_parse_dt(pdev);
+ if (ret) {
+ clk_disable_unprepare(weim->clk);
+ goto weim_err;
+ }
+
+ dev_info(&pdev->dev, "WEIM driver registered.\n");
+ return 0;
+
+weim_err:
+ return ret;
+}
+
+static int weim_remove(struct platform_device *pdev)
+{
+ struct imx_weim *weim = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(weim->clk);
+ return 0;
+}
+
+static struct platform_driver weim_driver = {
+ .driver = {
+ .name = "imx-weim",
+ .of_match_table = weim_id_table,
+ },
+ .probe = weim_probe,
+ .remove = weim_remove,
+};
+
+module_platform_driver(weim_driver);
+MODULE_AUTHOR("Freescale Inc.");
+MODULE_DESCRIPTION("i.MX EIM Controller Driver");
+MODULE_LICENSE("GPL");
--
1.7.1
More information about the linux-arm-kernel
mailing list