[PATCH v2 2/5] ARM: dts: OMAP2+: use existing constants for GPIOs
Florian Vaussard
florian.vaussard at epfl.ch
Thu May 23 11:36:58 EDT 2013
Use standard GPIO constants to enhance the readability of DT GPIOs.
Signed-off-by: Florian Vaussard <florian.vaussard at epfl.ch>
---
arch/arm/boot/dts/omap2.dtsi | 2 ++
arch/arm/boot/dts/omap3-beagle-xm.dts | 4 ++--
arch/arm/boot/dts/omap3-beagle.dts | 6 +++---
arch/arm/boot/dts/omap3-devkit8000.dts | 6 +++---
arch/arm/boot/dts/omap3-evm.dts | 2 +-
arch/arm/boot/dts/omap3-igep0020.dts | 8 ++++----
arch/arm/boot/dts/omap3-igep0030.dts | 8 ++++----
arch/arm/boot/dts/omap3-tobi.dts | 2 +-
arch/arm/boot/dts/omap3.dtsi | 2 ++
arch/arm/boot/dts/omap4-panda-common.dtsi | 4 ++--
arch/arm/boot/dts/omap4-sdp.dts | 16 ++++++++--------
arch/arm/boot/dts/omap4.dtsi | 2 ++
arch/arm/boot/dts/omap5.dtsi | 2 ++
13 files changed, 36 insertions(+), 28 deletions(-)
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index e6e4587..f39b237 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -8,6 +8,8 @@
* kind, whether express or implied.
*/
+#include <dt-bindings/gpio/gpio.h>
+
#include "skeleton.dtsi"
/ {
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index e0ce823..1e580d9 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -29,13 +29,13 @@
heartbeat {
label = "beagleboard::usr0";
- gpios = <&gpio5 22 0>; /* 150 -> D6 LED */
+ gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
linux,default-trigger = "heartbeat";
};
mmc {
label = "beagleboard::usr1";
- gpios = <&gpio5 21 0>; /* 149 -> D7 LED */
+ gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
linux,default-trigger = "mmc0";
};
};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index fcac96a..434288f 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -28,18 +28,18 @@
compatible = "gpio-leds";
pmu_stat {
label = "beagleboard::pmu_stat";
- gpios = <&twl_gpio 19 0>; /* LEDB */
+ gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
};
heartbeat {
label = "beagleboard::usr0";
- gpios = <&gpio5 22 0>; /* 150 -> D6 LED */
+ gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
linux,default-trigger = "heartbeat";
};
mmc {
label = "beagleboard::usr1";
- gpios = <&gpio5 21 0>; /* 149 -> D7 LED */
+ gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
linux,default-trigger = "mmc0";
};
};
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
index 8d0f5e4..5be71b1 100644
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -22,21 +22,21 @@
heartbeat {
label = "devkit8000::led1";
- gpios = <&gpio6 26 0>; /* 186 -> LED1 */
+ gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* 186 -> LED1 */
default-state = "on";
linux,default-trigger = "heartbeat";
};
mmc {
label = "devkit8000::led2";
- gpios = <&gpio6 3 0>; /* 163 -> LED2 */
+ gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 -> LED2 */
default-state = "on";
linux,default-trigger = "none";
};
usr {
label = "devkit8000::led3";
- gpios = <&gpio6 4 0>; /* 164 -> LED3 */
+ gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* 164 -> LED3 */
default-state = "on";
linux,default-trigger = "usr";
};
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
index d75759b..baa24bb 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -28,7 +28,7 @@
compatible = "gpio-leds";
ledb {
label = "omap3evm::ledb";
- gpios = <&twl_gpio 19 0>; /* LEDB */
+ gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
linux,default-trigger = "default-on";
};
};
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index 2f96a5c..659e57c 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -19,25 +19,25 @@
compatible = "gpio-leds";
boot {
label = "omap3:green:boot";
- gpios = <&gpio1 26 0>;
+ gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
user0 {
label = "omap3:red:user0";
- gpios = <&gpio1 27 0>;
+ gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
user1 {
label = "omap3:red:user1";
- gpios = <&gpio1 28 0>;
+ gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
user2 {
label = "omap3:green:user1";
- gpios = <&twl_gpio 19 1>;
+ gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;
};
};
};
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index f3a1bf0..8d3baef 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -19,25 +19,25 @@
compatible = "gpio-leds";
boot {
label = "omap3:green:boot";
- gpios = <&twl_gpio 13 1>;
+ gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>;
default-state = "on";
};
user0 {
label = "omap3:red:user0";
- gpios = <&twl_gpio 18 1>; /* LEDA */
+ gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */
default-state = "off";
};
user1 {
label = "omap3:green:user1";
- gpios = <&twl_gpio 19 1>; /* LEDB */
+ gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>; /* LEDB */
default-state = "off";
};
user2 {
label = "omap3:red:user1";
- gpios = <&gpio1 16 1>;
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-tobi.dts
index 5df894f..c7eebbf 100644
--- a/arch/arm/boot/dts/omap3-tobi.dts
+++ b/arch/arm/boot/dts/omap3-tobi.dts
@@ -20,7 +20,7 @@
compatible = "gpio-leds";
heartbeat {
label = "overo:red:gpio21";
- gpios = <&gpio1 21 0>;
+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 7c7d494..aede64d 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -8,6 +8,8 @@
* kind, whether express or implied.
*/
+#include <dt-bindings/gpio/gpio.h>
+
#include "skeleton.dtsi"
/ {
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 63148d1..a3ef2bd 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -20,13 +20,13 @@
compatible = "gpio-leds";
heartbeat {
label = "pandaboard::status1";
- gpios = <&gpio1 7 0>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
mmc {
label = "pandaboard::status2";
- gpios = <&gpio1 8 0>;
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
};
};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 5edd08e..564d19b 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -41,42 +41,42 @@
compatible = "gpio-leds";
debug0 {
label = "omap4:green:debug0";
- gpios = <&gpio2 29 0>; /* 61 */
+ gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */
};
debug1 {
label = "omap4:green:debug1";
- gpios = <&gpio1 30 0>; /* 30 */
+ gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */
};
debug2 {
label = "omap4:green:debug2";
- gpios = <&gpio1 7 0>; /* 7 */
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */
};
debug3 {
label = "omap4:green:debug3";
- gpios = <&gpio1 8 0>; /* 8 */
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */
};
debug4 {
label = "omap4:green:debug4";
- gpios = <&gpio2 18 0>; /* 50 */
+ gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
};
user1 {
label = "omap4:blue:user";
- gpios = <&gpio6 9 0>; /* 169 */
+ gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
};
user2 {
label = "omap4:red:user";
- gpios = <&gpio6 10 0>; /* 170 */
+ gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
};
user3 {
label = "omap4:green:user";
- gpios = <&gpio5 11 0>; /* 139 */
+ gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */
};
};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 53d80aa..00f6ab9 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -14,6 +14,8 @@
*/
/memreserve/ 0x9d000000 0x03000000;
+#include <dt-bindings/gpio/gpio.h>
+
#include "skeleton.dtsi"
/ {
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index e8e6653..d613bf5 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -15,6 +15,8 @@
*/
/memreserve/ 0x9d000000 0x03000000;
+#include <dt-bindings/gpio/gpio.h>
+
#include "skeleton.dtsi"
/ {
--
1.7.5.4
More information about the linux-arm-kernel
mailing list