[PATCH 08/15] ARM: clps711x: Move specific definitions from hardware.h to boards files
Alexander Shiyan
shc_work at mail.ru
Mon May 13 13:07:30 EDT 2013
Signed-off-by: Alexander Shiyan <shc_work at mail.ru>
---
arch/arm/mach-clps711x/board-edb7211.c | 8 ++++++--
arch/arm/mach-clps711x/include/mach/hardware.h | 7 -------
2 files changed, 6 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c
index e1c5573..3ba4b9e 100644
--- a/arch/arm/mach-clps711x/board-edb7211.c
+++ b/arch/arm/mach-clps711x/board-edb7211.c
@@ -39,9 +39,13 @@
#define EDB7211_FLASH0_BASE (CS0_PHYS_BASE)
#define EDB7211_FLASH1_BASE (CS1_PHYS_BASE)
+
#define EDB7211_CS8900_BASE (CS2_PHYS_BASE + 0x300)
#define EDB7211_CS8900_IRQ (IRQ_EINT3)
+/* The extra 8 lines of the keyboard matrix */
+#define EDB7211_EXTKBD_BASE (CS3_PHYS_BASE)
+
static struct resource edb7211_cs8900_resource[] __initdata = {
DEFINE_RES_MEM(EDB7211_CS8900_BASE, SZ_1K),
DEFINE_RES_IRQ(EDB7211_CS8900_IRQ),
@@ -113,8 +117,8 @@ static struct gpio edb7211_gpios[] __initconst = {
static struct map_desc edb7211_io_desc[] __initdata = {
{ /* Memory-mapped extra keyboard row */
- .virtual = IO_ADDRESS(EP7211_PHYS_EXTKBD),
- .pfn = __phys_to_pfn(EP7211_PHYS_EXTKBD),
+ .virtual = IO_ADDRESS(EDB7211_EXTKBD_BASE),
+ .pfn = __phys_to_pfn(EDB7211_EXTKBD_BASE),
.length = SZ_1M,
.type = MT_DEVICE,
},
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
index 2f23dd5..c5a8ea6 100644
--- a/arch/arm/mach-clps711x/include/mach/hardware.h
+++ b/arch/arm/mach-clps711x/include/mach/hardware.h
@@ -70,11 +70,4 @@
#define CLPS711X_SDRAM0_BASE (0xc0000000)
#define CLPS711X_SDRAM1_BASE (0xd0000000)
-#if defined (CONFIG_ARCH_EDB7211)
-
-/* The extra 8 lines of the keyboard matrix are wired to chip select 3 */
-#define EP7211_PHYS_EXTKBD CS3_PHYS_BASE
-
-#endif /* CONFIG_ARCH_EDB7211 */
-
#endif
--
1.8.1.5
More information about the linux-arm-kernel
mailing list