[PATCHv4 4/6] ARM: sunxi: Add EMAC controller node to sun4i DTSI

[Maxime Ripard]

Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
Tested-by: Richard Genoud <richard.genoud at gmail.com>
---
 arch/arm/boot/dts/sun4i-a10.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index ff1f41f..983da33 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -163,6 +163,22 @@
 		reg = <0x01c20000 0x300000>;
 		ranges;
 
+		emac: ethernet at 01c0b000 {
+			compatible = "allwinner,sun4i-emac";
+			reg = <0x01c0b000 0x1000>;
+			interrupts = <55>;
+			clocks = <&ahb_gates 17>;
+			status = "disabled";
+		};
+
+		mdio at 01c0b080 {
+			compatible = "allwinner,sun4i-mdio";
+			reg = <0x01c0b080 0x14>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		intc: interrupt-controller at 01c20400 {
 			compatible = "allwinner,sun4i-ic";
 			reg = <0x01c20400 0x400>;
-- 
1.8.2.3