[PATCH 1/8] drivers: bus: add ARM CCI support

[Jon Medhurst (Tixy)]

On Fri, 2013-05-24 at 01:45 -0400, Nicolas Pitre wrote:
[...]
> diff --git a/Documentation/devicetree/bindings/arm/cci.txt b/Documentation/devicetree/bindings/arm/cci.txt
[...]
> +	cci at 2c090000 {
> +		compatible = "arm,cci-400";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		reg = <0x0 0x2c090000 0 0x1000>;
> +		ranges = <0x0 0x0 0x2c090000 0x6000>;
> +
> +		cci_control0: slave-if at 1000 {
> +			interface-type = "ace-lite";
> +			reg = <0x1000 0x1000>;
> +		};
> +
> +		cci_control1: slave-if at 4000 {
> +			interface-type = "ace";
> +			reg = <0x4000 0x1000>;
> +		};
> +
> +		cci_control2: slave-if at 5000 {
> +			interface-type = "ace";
> +			reg = <0x5000 0x1000>;
> +		};
> +	};

The above examples of slave-if nodes are missing the required
compatible = "arm,cci-400-ctrl-if";

-- 
Tixy