[PATCH 08/11] ARM: davinci: start using gpiolib support

[Philip Avinash]

- Remove NEED_MACH_GPIO_H config option for Davinci platforms to start
  using common gpio library interface.
- Added struct davinci_gpio_controller definitions in platform_data
  directory for Davinci gpio devices.
- Removed GPIO_TYPE_DAVINCI enum definition as GPIO Davinci is converted
  to Linux device driver model.

Signed-off-by: Philip Avinash <avinashphilip at ti.com>
---
 arch/arm/Kconfig                                  |    1 -
 arch/arm/mach-davinci/include/mach/gpio-davinci.h |    6 +++--
 include/linux/platform_data/gpio-davinci.h        |   27 +++++++++++++++++++++
 3 files changed, 31 insertions(+), 3 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 13b7394..74d3e85 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -955,7 +955,6 @@ config ARCH_DAVINCI
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
 	select HAVE_IDE
-	select NEED_MACH_GPIO_H
 	select USE_OF
 	select ZONE_DMA
 	help
diff --git a/arch/arm/mach-davinci/include/mach/gpio-davinci.h b/arch/arm/mach-davinci/include/mach/gpio-davinci.h
index b325a1d..18140e0 100644
--- a/arch/arm/mach-davinci/include/mach/gpio-davinci.h
+++ b/arch/arm/mach-davinci/include/mach/gpio-davinci.h
@@ -23,9 +23,10 @@
 
 #define DAVINCI_GPIO_BASE 0x01C67000
 
+#ifdef CONFIG_ARCH_DAVINCI_TNETV107X
+
 enum davinci_gpio_type {
-	GPIO_TYPE_DAVINCI = 0,
-	GPIO_TYPE_TNETV107X,
+	GPIO_TYPE_TNETV107X = 0,
 };
 
 /*
@@ -90,4 +91,5 @@ static inline u32 __gpio_mask(unsigned gpio)
 	return 1 << (gpio % 32);
 }
 
+#endif	/* CONFIG_ARCH_DAVINCI_TNETV107X */
 #endif	/* __DAVINCI_DAVINCI_GPIO_H */
diff --git a/include/linux/platform_data/gpio-davinci.h b/include/linux/platform_data/gpio-davinci.h
index f1c8277..75805d4 100644
--- a/include/linux/platform_data/gpio-davinci.h
+++ b/include/linux/platform_data/gpio-davinci.h
@@ -18,10 +18,37 @@
 #ifndef __ASM_ARCH_DAVINCI_GPIO_H
 #define __ASM_ARCH_DAVINCI_GPIO_H
 
+#include <asm-generic/gpio.h>
+
 struct davinci_gpio_platform_data {
 	u32	ngpio;
 	u32	gpio_unbanked;
 	u32	intc_irq_num;
 };
 
+
+struct davinci_gpio_controller {
+	struct gpio_chip	chip;
+	int			irq_base;
+	spinlock_t		lock;
+	void __iomem		*regs;
+	void __iomem		*set_data;
+	void __iomem		*clr_data;
+	void __iomem		*in_data;
+	int			gpio_unbanked;
+	unsigned		gpio_irq;
+};
+
+/*
+ * basic gpio routines
+ */
+#define	GPIO(X)		(X)	/* 0 <= X <= (DAVINCI_N_GPIO - 1) */
+
+/* Convert GPIO signal to GPIO pin number */
+#define GPIO_TO_PIN(bank, gpio)	(16 * (bank) + (gpio))
+
+static inline u32 __gpio_mask(unsigned gpio)
+{
+	return 1 << (gpio % 32);
+}
 #endif
-- 
1.7.9.5