[PATCH 0/2] ARM: dts: add watchdog device tree node in at91 dts files

[Nicolas Ferre]

On 31/05/2013 11:39, Richard Genoud :
> 2013/5/31 Wenyou Yang <wenyou.yang at atmel.com>:
>> Hello,
>>
>> The patches is to add watchdog device tree node for at91 SoC and board dts files.
>>
>> Since the watchdog is disabled in the at91bootstrap with default configuration,
>> if you want to use the watchdog in the kernel, you must make sure the watchdog
>> doesn't be disabled in the at91bootstrap.
>>
>> It is tested on at91sam9g20ek, at91sam9263ek, at91sam9g25ek
>> using Documentation/watchdog/src/watchdog-simple.c.
>>
>> It is based on v3.10-rc3, tested on linux-watchdog git tree as well.
>>
>> Best Regards,
>> Wenyou Yang
>>
>> Wenyou Yang (2):
>>    ARM: dts: add the watchdog nodes for at91 SoC
>>    ARM: dts: add the watchdog nodes for at91 boards
>>
>>   arch/arm/boot/dts/at91sam9263ek.dts         |    4 ++++
>>   arch/arm/boot/dts/at91sam9g20ek_common.dtsi |    4 ++++
>>   arch/arm/boot/dts/at91sam9m10g45ek.dts      |    4 ++++
>>   arch/arm/boot/dts/at91sam9n12.dtsi          |    6 ++++++
>>   arch/arm/boot/dts/at91sam9n12ek.dts         |    4 ++++
>>   arch/arm/boot/dts/at91sam9x5.dtsi           |    6 ++++++
>>   arch/arm/boot/dts/at91sam9x5ek.dtsi         |    4 ++++
>>   7 files changed, 32 insertions(+)
>>
>> --
>> 1.7.9.5
>>
>
> Those patches haven been floating around from quite some time.
> Let's merge them !
>
> Tested on sam9g35, v3.10-rc2
>
> Tested-by: Richard Genoud <richard.genoud at gmail.com>

Both patches added to the at91-3.11-dt branch. Thanks!

Bye,
-- 
Nicolas Ferre