[PATCH 0/2] ARM: dts: add watchdog device tree node in at91 dts files

[Richard Genoud]

2013/5/31 Wenyou Yang <wenyou.yang at atmel.com>:
> Hello,
>
> The patches is to add watchdog device tree node for at91 SoC and board dts files.
>
> Since the watchdog is disabled in the at91bootstrap with default configuration,
> if you want to use the watchdog in the kernel, you must make sure the watchdog
> doesn't be disabled in the at91bootstrap.
>
> It is tested on at91sam9g20ek, at91sam9263ek, at91sam9g25ek
> using Documentation/watchdog/src/watchdog-simple.c.
>
> It is based on v3.10-rc3, tested on linux-watchdog git tree as well.
>
> Best Regards,
> Wenyou Yang
>
> Wenyou Yang (2):
>   ARM: dts: add the watchdog nodes for at91 SoC
>   ARM: dts: add the watchdog nodes for at91 boards
>
>  arch/arm/boot/dts/at91sam9263ek.dts         |    4 ++++
>  arch/arm/boot/dts/at91sam9g20ek_common.dtsi |    4 ++++
>  arch/arm/boot/dts/at91sam9m10g45ek.dts      |    4 ++++
>  arch/arm/boot/dts/at91sam9n12.dtsi          |    6 ++++++
>  arch/arm/boot/dts/at91sam9n12ek.dts         |    4 ++++
>  arch/arm/boot/dts/at91sam9x5.dtsi           |    6 ++++++
>  arch/arm/boot/dts/at91sam9x5ek.dtsi         |    4 ++++
>  7 files changed, 32 insertions(+)
>
> --
> 1.7.9.5
>

Those patches haven been floating around from quite some time.
Let's merge them !

Tested on sam9g35, v3.10-rc2

Tested-by: Richard Genoud <richard.genoud at gmail.com>