[PATCH v2 4/6] usb: phy: samsung: Pass set_isolation callback through driver data
Tomasz Figa
t.figa at samsung.com
Thu May 16 05:57:09 EDT 2013
This patch extends driver data structure with set_isolation callback,
which allows to remove the need for checking for SoC type in a switch
statement.
Signed-off-by: Tomasz Figa <t.figa at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
---
drivers/usb/phy/phy-samsung-usb.c | 36 ++++++++----------------------------
drivers/usb/phy/phy-samsung-usb.h | 4 +++-
drivers/usb/phy/phy-samsung-usb2.c | 11 +++++++----
drivers/usb/phy/phy-samsung-usb3.c | 7 +++++--
4 files changed, 23 insertions(+), 35 deletions(-)
diff --git a/drivers/usb/phy/phy-samsung-usb.c b/drivers/usb/phy/phy-samsung-usb.c
index c40ea32..7a1ed90 100644
--- a/drivers/usb/phy/phy-samsung-usb.c
+++ b/drivers/usb/phy/phy-samsung-usb.c
@@ -73,7 +73,7 @@ EXPORT_SYMBOL_GPL(samsung_usbphy_parse_dt);
* Here 'on = true' would mean USB PHY block is isolated, hence
* de-activated and vice-versa.
*/
-void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on)
+void samsung_usbphy_set_isolation_4210(struct samsung_usbphy *sphy, bool on)
{
void __iomem *reg = NULL;
u32 reg_val;
@@ -84,32 +84,12 @@ void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on)
return;
}
- switch (sphy->drv_data->cpu_type) {
- case TYPE_S3C64XX:
- /*
- * Do nothing: We will add here once S3C64xx goes for DT support
- */
- break;
- case TYPE_EXYNOS4210:
- /*
- * Fall through since exynos4210 and exynos5250 have similar
- * register architecture: two separate registers for host and
- * device phy control with enable bit at position 0.
- */
- case TYPE_EXYNOS5250:
- if (sphy->phy_type == USB_PHY_TYPE_DEVICE) {
- reg = sphy->pmuregs +
- sphy->drv_data->devphy_reg_offset;
- en_mask = sphy->drv_data->devphy_en_mask;
- } else if (sphy->phy_type == USB_PHY_TYPE_HOST) {
- reg = sphy->pmuregs +
- sphy->drv_data->hostphy_reg_offset;
- en_mask = sphy->drv_data->hostphy_en_mask;
- }
- break;
- default:
- dev_err(sphy->dev, "Invalid SoC type\n");
- return;
+ if (sphy->phy_type == USB_PHY_TYPE_DEVICE) {
+ reg = sphy->pmuregs + sphy->drv_data->devphy_reg_offset;
+ en_mask = sphy->drv_data->devphy_en_mask;
+ } else if (sphy->phy_type == USB_PHY_TYPE_HOST) {
+ reg = sphy->pmuregs + sphy->drv_data->hostphy_reg_offset;
+ en_mask = sphy->drv_data->hostphy_en_mask;
}
reg_val = readl(reg);
@@ -121,7 +101,7 @@ void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on)
writel(reg_val, reg);
}
-EXPORT_SYMBOL_GPL(samsung_usbphy_set_isolation);
+EXPORT_SYMBOL_GPL(samsung_usbphy_set_isolation_4210);
/*
* Configure the mode of working of usb-phy here: HOST/DEVICE.
diff --git a/drivers/usb/phy/phy-samsung-usb.h b/drivers/usb/phy/phy-samsung-usb.h
index 0336f6b..5203784 100644
--- a/drivers/usb/phy/phy-samsung-usb.h
+++ b/drivers/usb/phy/phy-samsung-usb.h
@@ -271,6 +271,7 @@ struct samsung_usbphy_drvdata {
u32 devphy_reg_offset;
u32 hostphy_reg_offset;
int (*rate_to_clksel)(struct samsung_usbphy *, unsigned long);
+ void (*set_isolation)(struct samsung_usbphy *, bool);
};
/*
@@ -323,7 +324,8 @@ static inline const struct samsung_usbphy_drvdata
}
extern int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy);
-extern void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on);
+extern void samsung_usbphy_set_isolation_4210(struct samsung_usbphy *sphy,
+ bool on);
extern void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy);
extern int samsung_usbphy_set_type(struct usb_phy *phy,
enum samsung_usb_phy_type phy_type);
diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c
index 802e738..ae6da68 100644
--- a/drivers/usb/phy/phy-samsung-usb2.c
+++ b/drivers/usb/phy/phy-samsung-usb2.c
@@ -284,8 +284,8 @@ static int samsung_usb2phy_init(struct usb_phy *phy)
/* Disable phy isolation */
if (sphy->plat && sphy->plat->pmu_isolation)
sphy->plat->pmu_isolation(false);
- else
- samsung_usbphy_set_isolation(sphy, false);
+ else if (sphy->drv_data->set_isolation)
+ sphy->drv_data->set_isolation(sphy, false);
/* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */
samsung_usbphy_cfg_sel(sphy);
@@ -342,8 +342,8 @@ static void samsung_usb2phy_shutdown(struct usb_phy *phy)
/* Enable phy isolation */
if (sphy->plat && sphy->plat->pmu_isolation)
sphy->plat->pmu_isolation(true);
- else
- samsung_usbphy_set_isolation(sphy, true);
+ else if (sphy->drv_data->set_isolation)
+ sphy->drv_data->set_isolation(sphy, true);
spin_unlock_irqrestore(&sphy->lock, flags);
@@ -447,6 +447,7 @@ static const struct samsung_usbphy_drvdata usb2phy_s3c64xx = {
.cpu_type = TYPE_S3C64XX,
.devphy_en_mask = S3C64XX_USBPHY_ENABLE,
.rate_to_clksel = samsung_usbphy_rate_to_clksel_64xx,
+ .set_isolation = NULL, /* TODO */
};
static const struct samsung_usbphy_drvdata usb2phy_exynos4 = {
@@ -454,6 +455,7 @@ static const struct samsung_usbphy_drvdata usb2phy_exynos4 = {
.devphy_en_mask = EXYNOS_USBPHY_ENABLE,
.hostphy_en_mask = EXYNOS_USBPHY_ENABLE,
.rate_to_clksel = samsung_usbphy_rate_to_clksel_64xx,
+ .set_isolation = samsung_usbphy_set_isolation_4210,
};
static struct samsung_usbphy_drvdata usb2phy_exynos5 = {
@@ -461,6 +463,7 @@ static struct samsung_usbphy_drvdata usb2phy_exynos5 = {
.hostphy_en_mask = EXYNOS_USBPHY_ENABLE,
.hostphy_reg_offset = EXYNOS_USBHOST_PHY_CTRL_OFFSET,
.rate_to_clksel = samsung_usbphy_rate_to_clksel_4x12,
+ .set_isolation = samsung_usbphy_set_isolation_4210,
};
#ifdef CONFIG_OF
diff --git a/drivers/usb/phy/phy-samsung-usb3.c b/drivers/usb/phy/phy-samsung-usb3.c
index c07bc32..ae232ad 100644
--- a/drivers/usb/phy/phy-samsung-usb3.c
+++ b/drivers/usb/phy/phy-samsung-usb3.c
@@ -184,7 +184,8 @@ static int samsung_usb3phy_init(struct usb_phy *phy)
samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
/* Disable phy isolation */
- samsung_usbphy_set_isolation(sphy, false);
+ if (sphy->drv_data->set_isolation)
+ sphy->drv_data->set_isolation(sphy, false);
/* Initialize usb phy registers */
samsung_exynos5_usb3phy_enable(sphy);
@@ -221,7 +222,8 @@ static void samsung_usb3phy_shutdown(struct usb_phy *phy)
samsung_exynos5_usb3phy_disable(sphy);
/* Enable phy isolation */
- samsung_usbphy_set_isolation(sphy, true);
+ if (sphy->drv_data->set_isolation)
+ sphy->drv_data->set_isolation(sphy, true);
spin_unlock_irqrestore(&sphy->lock, flags);
@@ -309,6 +311,7 @@ static struct samsung_usbphy_drvdata usb3phy_exynos5 = {
.cpu_type = TYPE_EXYNOS5250,
.devphy_en_mask = EXYNOS_USBPHY_ENABLE,
.rate_to_clksel = samsung_usbphy_rate_to_clksel_4x12,
+ .set_isolation = samsung_usbphy_set_isolation_4210,
};
#ifdef CONFIG_OF
--
1.8.2.1
More information about the linux-arm-kernel
mailing list